Dragino LoRaWAN Weather Station User Manual

Dragino LoRaWAN weather station series products are designed for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate. They consist of a main process device (WSC1-L) and various sensors.

23

24

25

The sensors include various type such as: Rain Gauge, Temperature/Humidity/Pressure sensor, Wind Speed/direction sensor, Illumination sensor, CO2 sensor, Rain/Snow sensor, PM2.5/10 sensor, PAR(Photosynthetically Available Radiation) sensor, Total Solar Radiation sensor and so on.

26

27

28

Main process device WSC1-L is an outdoor LoRaWAN RS485 end node. It is powered by external 12v solar power and have a built-in li-on backup battery. WSC1-L reads value from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol.

29

30

31

WSC1-L is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.

= 2. How to use =

== 2.1 Installation ==

39

40

Below is an installation example for the weather station. Field installation example can be found at [[Appendix I: Field Installation Photo.>>path:#Installation_Photo]]

41

42

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

**Wiring:**

~1. WSC1-L and sensors all powered by solar power via MPPT

47

48

2. WSC1-L and sensors connect to each other via RS485/Modbus.

49

50

3. WSC1-L read value from each sensor and send uplink via LoRaWAN

51

52

53

WSC1-L is shipped with a RS485 converter board, for the easy connection to different sensors and WSC1-L. Below is a connection photo:

54

55

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]

Notice 1:

* All weather sensors and WSC1-L are powered by MPPT solar recharge controller. MPPT is connected to solar panel and storage battery.

63

* WSC1-L has an extra 1000mAh back up battery. So it can work even solar panel and storage battery Fails.

64

* Weather sensors won’t work if solar panel and storage battery fails.

Notice 2:

Due to shipment and importation limitation, user is better to purchase below parts locally:

* Solar Panel

* Storage Battery

* MPPT Solar Recharger

73

* Mounting Kit includes pole and mast assembly. Each weather sensor has it’s own mounting assembly, user can check the sensor section in this manual.

* Cabinet.

== 2.2 How it works? ==

80

81

Each WSC1-L is shipped with a worldwide unique set of OTAA keys. To use WSC1-L in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After finish installation as above. Create WSC1-L in your LoRaWAN server and Power on WSC1-L , it can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is 20 minutes.

82

83

84

Open WSC1-L and put the yellow jumper as below position to power on WSC1-L.

85

86

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]

Notice:

1. WSC1-L will auto scan available weather sensors when power on or reboot.

92

1. User can send a downlink command( 增加下发命令的连接) to WSC1-L to do a re-scan on the available sensors.

== 2.3 Example to use for LoRaWAN network ==

97

98

This section shows an example for how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

99

100

101

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the WSC1-L device in TTN V3:

106

107

108

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from WSC1-L.

109

110

Each WSC1-L is shipped with a sticker with the default device EUI as below:

111

112

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]

113

114

115

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

116

117

Add APP EUI in the application.

118

119

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]

120

121

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]

Choose Manually to add WSC1-L

132

133

134

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]

135

136

Add APP KEY and DEV EUI

137

138

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]

(% style="color:blue" %)**Step 2**(%%): Power on WSC1-L, it will start to join TTN server. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

144

145

146

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]

== 2.4 Uplink Payload ==

152

153

Uplink payloads include two types: Valid Sensor Value and other status / control command.

154

155

* Valid Sensor Value: Use FPORT=2

156

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT ===

5, Device Status ===

Uplink the device configures with FPORT=5. Once WSC1-L Joined the network, it will uplink this message to the server. After first uplink, WSC1-L will uplink Device Status every 12 hours

167

168

169

User can also use downlink command(0x2301) to ask WSC1-L to resend this uplink

170

171

|**Size (bytes)**|**1**|**2**|**1**|**1**|**2**|**3**

172

|**Value**|[[Sensor Model>>||anchor="HSensorModel:"]]|[[Firmware Version>>||anchor="HFirmwareVersion:"]]|[[Frequency Band>>||anchor="HFrequencyBand:"]]|[[Sub-band>>||anchor="HSub-Band:"]]|[[BAT>>||anchor="HBAT:"]]|[[Weather Sensor Types>>||anchor="HWeatherSensorTypes:"]]

173

174

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]

175

176

177

Example Payload (FPort=5): [[image:image-20220624101005-1.png]]

==== (% style="color:#037691" %)**Sensor Model:** ====

182

183

For WSC1-L, this value is 0x0D.

184

185

186

==== (% style="color:#037691" %)**Firmware Version:** ====

187

188

0x0100, Means: v1.0.0 version.

189

190

191

==== (% style="color:#037691" %)**Frequency Band:** ====

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

==== (% style="color:#037691" %)**Sub-Band:** ====

215

216

value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

217

218

219

==== (% style="color:#037691" %)**BAT:** ====

220

221

shows the battery voltage for WSC1-L MCU.

222

223

Ex1: 0x0BD6/1000 = 3.03 V

224

225

226

==== (% style="color:#037691" %)**Weather Sensor Types:** ====

|Byte3|Byte2|Byte1

Bit = 1 means this sensor is connected, Bit=0 means this sensor is not connected

231

232

233

|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16

234

|N/A|Customize-A4|Customize-A3|Customize-A2|Customize-A1|N/A|N/A|N/A

235

|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8

236

|N/A|N/A|N/A|N/A|N/A|N/A|N/A|N/A

237

|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0

238

|WSS-07|WSS-06|WSS-05|WSS-04|WSS-03|WSS-02|WSS-01|N/A

239

240

Eg: 0x1000FE = 1 0000 0000 0000 1111 1110(b)

241

242

External sensors detected by WSC1-L include :

custom sensor A1,

PAR sensor (WSS-07),

Total Solar Radiation sensor (WSS-06),

249

250

CO2/PM2.5/PM10 (WSS-03),

251

252

Wind Speed/Direction (WSS-02)

User can also use downlink command(0x26 01) to ask WSC1-L to resend this uplink :

258

259

(% style="color:#037691" %)**Downlink:0x26 01**

260

261

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png||alt="1646898147(1)"]]

=== 2.4.2 Uplink FPORT=2, Real time sensor value ===

267

268

WSC1-L will send this uplink after Device Config uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H"]].

269

270

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

271

272

273

The upload length is dynamic, depends on what type of weather sensors are connected. The uplink payload is combined with sensor segments. As below:

274

275

|Sensor Segment 1|Sensor Segment 2|……|Sensor Segment n

276

277

**(% style="color:#4472C4" %) Uplink Payload**:

278

279

|Type Code|Length (Bytes)|Measured Value

280

281

**(% style="color:#4472C4" %) Sensor Segment Define**:

Sensor Type Table:

|**Wind Speed**|0x01|(((

Speed: 0～60m/s

Level: 0～17

)))|0x03 |(((

0x0024/10=3.6m/s

(0x02FE: No Sensor, 0x02FF: Value Error)

0x02=2

(0x14: No Sensor, 0x15: Value Error)

300

)))

301

|**Wind Direction**|0x02|(((

302

Angel: 0～360°

303

304

Direction: 16 positions

)))|0x03|(((

0x029A/10=66.6°

(0x0EFE: No Sensor,0x0EFF: Value Error)

0X03=3(ENE)

(0x14: No Sensor,0x15: Value Error)

313

)))

314

|**Illumination**|0x03|0～200000Lux|0x02|(((

315

0x04D2 *10=12340Lux

316

317

(0x4EFE: No Sensor,0x4EFF: Value Error)

318

)))

319

|**Rain / Snow**|0x04|00: No, 01 Yes.|0x01|(((

320

0x00 (00) No Rain or snow detected

321

322

(0x02: No Sensor,0x03: Value Error)

323

)))

324

|**CO2**|0x05|0～5000ppm|0x02|(((

325

0x0378=888ppm

326

327

(0x14FE: No Sensor,0x14FF: Value Error)

328

)))

329

|**Temperature**|0x06|-30℃～70℃|0x02|(((

330

0xFFDD/10=-3.5℃

331

332

(0x02FE: No Sensor,0x02FF: Value Error)

333

)))

334

|**Humidity**|0x07|0～100%RH|0x02|0x0164/10=35.6%RH (0x03FE: No Sensor,0x03FF: Value Error)

335

|**Pressure**|0x08|10～1100hPa|0x02|(((

336

0x2748/10=1005.6hPa

337

338

(0x00: No Sensor,0x01: Value Error)

339

)))

340

|**Rain Gauge**|0x09|0mm/min～100mm/min|0x02|(((

341

0x0000/10=0mm /min

342

343

(0x03FE: No Sensor,0x03FF: Value Error)

344

)))

345

|**PM2.5**|0x0A|0～1000μg/m^^3^^|0x02|(((

346

0x0023=35μg/m^^3 ^^

347

348

(0x03FE: No Sensor,0x03FF: Value Error)

349

)))

350

|**PM10**|0x0B|0～1000μg/m^^3^^|0x02|(((

351

0x002D=45μg/m^^3 ^^

352

353

(0x03FE: No Sensor,0x03FF: Value Error)

354

)))

355

|**PAR**|0x0C|0～2500μmol/m^^2^^•s|0x02|(((

356

0x00B3=179μmol/m^^2^^•s

357

358

(0x09FE: No Sensor,0x9FF: Value Error)

)))

|(((

**Total Solar**

**Radiation**

)))|0x0D|0～2000W/m^^2^^|0x02|(((

365

0x0073/10=11.5W/m^^2^^

366

367

(0x4EFE: No Sensor,0x4EFF: Value Error)

368

)))

369

370

Below is an example payload:

371

372

01 03 00 14 02 02 03 02 C9 03 03 02 11 90 04 02 00 0A 05 02 02 1C 06 02 00 FA 07 02 02 62 08 02 27 63 09 02 00 00 0A 02 00 23 0B 02 00 2D 0C 02 00 B3 0D 02 00 73

373

374

375

When sending this payload to LoRaWAN server. WSC1-L will send this in one uplink or several uplinks according to LoRaWAN spec requirement. For example, total length of Payload is 54 bytes.

376

377

* When WSC1-L sending in US915 frequency DR0 data rate. Because this data rate has limitation of 11 bytes payload for each uplink. The payload will be split into below packets and uplink. Uplink 1: 01 03 00 14 02 02 03 02 C9 03

378

379

Uplink 2: 03 02 11 90 04 02 00 0A 05 02 02 1C 06 02 00 FA 07 02 02 62 08 02 27 63 09 02 00 00 0A 02 00 23 0B 02 00 2D 0C 02 00 B3 0D 02 00 73

380

381

382

* When WSC1-L sending in EU868 frequency DR0 data rate. The payload will be split into below packets and uplink:

383

384

Uplink 1: 01 03 00 14 02 02 03 02 C9 03 03 02 11 90 04 02 00 0A 05 02 02 1C 06 02 00 FA 07 02 02 62 08 02 27 63 09 02 00 00 0A 02 00 23 0B 02 00 2D 0C 02 00 B3

385

386

Uplink 2: 0D 02 00 73

=== 2.4.3 Decoder in TTN V3 ===

392

393

In LoRaWAN platform, user only see HEX payload by default, user needs to use payload formatters to decode the payload to see human-readable value.

394

395

396

Download decoder for suitable platform from:

397

398

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/WSC1-L/]]

and put as below:

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]

== 2.5 Show data on Application Server ==

407

408

Application platform provides a human friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

409

410

411

**(% style="color:blue" %)Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

412

413

**(% style="color:blue" %)Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

414

415

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]

Add TagoIO:

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]

Authorization:

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]

425

426

427

In TagoIO console ([[https:~~/~~/admin.tago.io~~/~~/>>url:https://datacake.co/]]) , add WSC1-L:

428

429

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]

= 3. Configure WSC1-L via AT Command or LoRaWAN Downlink =

434

435

Use can configure WSC1-L via AT Command or LoRaWAN Downlink.

436

437

* AT Command Connection: See [[FAQ>>||anchor="H"]].

438

* LoRaWAN Downlink instruction for different platforms:

439

440

[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

441

442

443

There are two kinds of commands to configure WSC1-L, they are:

444

445

* **(% style="color:#4472C4" %)General Commands**.

446

447

These commands are to configure:

448

449

* General system settings like: uplink interval.

450

* LoRaWAN protocol & radio related command.

451

452

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack((% style="color:red" %)Note~*~*)(%%). These commands can be found on the wiki:

453

454

[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

455

456

(% style="color:red" %)Note~*~*: Please check early user manual if you don’t have v1.8.0 firmware.

457

458

459

* **(% style="color:#4472C4" %)Commands special design for WSC1-L**

460

461

These commands only valid for WSC1-L, as below:

462

463

464

== 3.1 Set Transmit Interval Time ==

465

466

Feature: Change LoRaWAN End Node Transmit Interval.

467

468

**(% style="color:#037691" %)AT Command: AT+TDC**

469

470

|**Command Example**|**Function**|**Response**

471

|AT+TDC?|Show current transmit Interval|(((

30000

OK

the interval is 30000ms = 30s

477

)))

478

|AT+TDC=60000|Set Transmit Interval|(((

479

OK

480

481

Set transmit interval to 60000ms = 60 seconds

482

)))

483

484

**(% style="color:#037691" %)Downlink Command: 0x01**

485

486

Format: Command Code (0x01) followed by 3 bytes time value.

487

488

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

489

490

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

491

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Emergency Mode ==

498

499

Feature: In emergency mode, WSC1-L will uplink data every 1 minute.

500

501

502

**(% style="color:#037691" %)AT Command:**

503

504

|**Command Example**|**Function**|**Response**

505

|AT+ALARMMOD=1|Enter emergency mode. Uplink every 1 minute|OK

506

|AT+ALARMMOD=0|Exit emergency mode. Uplink base on TDC time|OK

507

508

**(% style="color:#037691" %)Downlink Command:**

509

510

* 0xE101 Same as: AT+ALARMMOD=1

511

* 0xE100 Same as: AT+ALARMMOD=0

== 3.3 Add or Delete RS485 Sensor ==

518

519

Feature: User can add or delete 3^^rd^^ party sensor as long they are RS485/Modbus interface,baud rate support 9600.Maximum can add 4 sensors.

520

521

**(% style="color:#037691" %)AT Command: **

522

523

AT+DYSENSOR=Type_Code, Query_Length, Query_Command , Read_Length , Valid_Data ,has_CRC,timeout

524

525

* Type_Code range: A1 ~~ A4

526

* Query_Length: RS485 Query frame length, Value cannot be greater than 10

527

* Query_Command: RS485 Query frame data to be sent to sensor, cannot be larger than 10 bytes

528

* Read_Length: RS485 response frame length supposed to receive. Max can receive

529

* Valid_Data: valid data from RS485 Response, Valid Data will be added to Payload and upload via LoRaWAN.

530

* has_CRC: RS485 Response crc check (0: no verification required 1: verification required). If CRC=1 and CRC error, valid data will be set to 0.

531

* timeout: RS485 receive timeout (uint:ms). Device will close receive window after timeout

Example:

User need to change external sensor use the type code as address code.

537

538

With a 485 sensor, after correctly changing the address code to A1, the RS485 query frame is shown in the following table:

539

540

541

|0xA1|0x03|0x00|0x00|0x00|0x01|0x9C|0xAA

542

| | | | | | | |

543

544

The response frame of the sensor is as follows:

545

546

547

|0xA1|0x03|0x00|0x02|0x00|0x0A|0x7C|0xAD

548

| | | | | | | |

549

550

Then the following parameters should be:

551

552

* Address_Code range: A1

553

* Query_Length: 8

554

* Query_Command: A103000000019CAA

555

* Read_Length: 8

556

* Valid_Data: 24 (Indicates that the data length is 2 bytes, starting from the 4th byte)

557

* has_CRC: 1

558

* timeout: 1500 (Fill in the test according to the actual situation)

559

560

So the input command is:

561

562

AT+DYSENSOR=A1,8,A103000000019CAA,8,24,1,1500

563

564

565

In every sampling. WSC1-L will auto append the sensor segment as per this structure and uplink.

566

567

|Type Code|Length (Bytes)|Measured Value

|A1|2|0x000A

Related commands:

AT+DYSENSOR=A1,0 –> Delete 3^^rd^^ party sensor A1.

576

577

AT+DYSENSOR ~-~-> List All 3^^rd^^ Party Sensor. Like below:

578

579

580

**(% style="color:#037691" %)Downlink Command: **

581

582

**delete custom sensor A1:**

583

584

* 0xE5A1 Same as: AT+DYSENSOR=A1,0

585

586

**Remove all custom sensors**

* 0xE5FF

== 3.4 RS485 Test Command ==

595

596

**(% style="color:#037691" %)AT Command:**

597

598

|**Command Example**|**Function**|**Response**

599

|AT+RSWRITE=xxxxxx|(((

600

Send command to 485 sensor

601

602

Range : no more than 10 bytes

603

)))|OK

604

605

Eg: Send command **01 03 00 00 00 01 84 0A** to 485 sensor

606

607

AT+RSWRITE=0103000001840A

608

609

610

**(% style="color:#037691" %)Downlink Command:**

611

612

* 0xE20103000001840A Same as: AT+RSWRITE=0103000001840A

== 3.5 RS485 response timeout ==

617

618

Feature: Set or get extended time to receive 485 sensor data.

619

620

**(% style="color:#037691" %)AT Command:**

621

622

|**Command Example**|**Function**|**Response**

623

|AT+DTR=1000|(((

624

Set response timeout to:

Range : 0~~10000

)))|OK

**(% style="color:#037691" %)Downlink Command:**

630

631

Format: Command Code (0xE0) followed by 3 bytes time value.

632

633

If the downlink payload=E0000005, it means set the END Node’s Transmit Interval to 0x000005=5(S), while type code is E0.

634

635

* Example 1: Downlink Payload: E0000005 ~/~/ Set Transmit Interval (DTR) = 5 seconds

636

* Example 2: Downlink Payload: E000000A ~/~/ Set Transmit Interval (DTR) = 10 seconds

== 3.6 Set Sensor Type ==

643

644

Feature: Set sensor in used. If there are 6 sensors, user can set to only send 5 sensors values.

645

646

See [[definition>>||anchor="H"]] for the sensor type.

647

648

649

|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16

650

| |A4|A3|A2|A1| | |

651

|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8

652

| | |Solar Radiation|PAR|PM10|PM2.5|(((

Rain

Gauge

)))|(((

Air

Pressure

)))

|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0

662

|Humidity|Temperature|CO2|(((

Rain/Snow

Detect

)))|illuminance|(((

Wind

Direction

)))|Wind Speed|BAT

**(% style="color:#037691" %)AT Command:**

673

674

|**Command Example**|**Function**|**Response**

675

|AT+STYPE=80221|Set sensor types|OK

676

677

Eg: The setting command **AT+STYPE=802212** means:

678

679

|(% rowspan="2" %)Byte3|Bit23|Bit22|Bit21|Bit20|Bit19|Bit18|Bit17|Bit16

680

|0|0|0|0|1|0|0|0

681

|(% rowspan="2" %)Byte2|Bit15|Bit14|Bit13|Bit12|Bit11|Bit10|Bit9|Bit8

682

|0|0|0|0|0|0|1|0

683

|(% rowspan="2" %)Byte1|Bit7|Bit6|Bit5|Bit4|Bit3|Bit2|Bit1|Bit0

684

|0|0|1|0|0|0|0|1

685

686

So wsc1-L will upload the following data: Custom Sensor A1, Rain Gauge,CO2,BAT.

687

688

689

**(% style="color:#037691" %)Downlink Command:**

690

691

* 0xE400802212 Same as: AT+STYPE=80221

692

693

(% style="color:red" %)**Note:**

694

695

~1. The sensor type will not be saved to flash, and the value will be updated every time the sensor is restarted or rescanned

= 4. Power consumption and battery =

702

703

== 4.1 Total Power Consumption ==

704

705

Dragino Weather Station serial products include the main process unit ( WSC1-L ) and various sensors. The total power consumption equal total power of all above units. The power consumption for main process unit WSC1-L is 18ma @ 12v. and the power consumption of each sensor can be found on the Sensors chapter.

706

707

708

== 4.2 Reduce power consumption ==

709

710

The main process unit WSC1-L is set to LoRaWAN Class C by default. If user want to reduce the power consumption of this unit, user can set it to run in Class A. In Class A mode, WSC1-L will not be to get real-time downlink command from IoT Server.

== 4.3 Battery ==

All sensors are only power by external power source. If external power source is off. All sensor won’t work.

717

718

719

Main Process Unit WSC1-L is powered by both external power source and internal 1000mAh rechargeable battery. If external power source is off, WSC1-L still runs and can send periodically uplinks, but the sensors value will become invalid. External power source can recharge the 1000mAh rechargeable battery.

= 5. Main Process Unit WSC1-L =

== 5.1 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

729

* RS485 / Modbus protocol

730

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

731

* AT Commands to change parameters

732

* Remote configure parameters via LoRaWAN Downlink

733

* Firmware upgradable via program port

734

* Powered by external 12v battery

735

* Back up rechargeable 1000mAh battery

736

* IP Rating: IP65

737

* Support default sensors or 3rd party RS485 sensors

== 5.2 Power Consumption ==

744

745

WSC1-L (without external sensor): Idle: 4mA, Transmit: max 40mA

== 5.3 Storage & Operation Temperature ==

-20°C to +60°C

== 5.4 Pin Mapping ==

755

756

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]

== 5.5 Mechanical ==

Refer LSn50v2 enclosure drawing in: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/>>url:https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Mechanical_Drawing/]]

== 5.6 Connect to RS485 Sensors ==

767

768

WSC1-L includes a RS485 converter PCB. Which help it easy to connect multiply RS485 sensors. Below is the photo for reference.

769

770

771

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]

772

773

774

Hardware Design for the Converter Board please see:

775

776

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/RS485_Converter_Board/]]

= 6. Weather Sensors =

783

784

== 6.1 Rain Gauge ~-~- WSS-01 ==

785

786

WSS-01 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area.

787

788

789

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline

790

791

shape to make sure it works smoothly and is easy to clean.

792

793

794

WSS-01 is designed to support the Dragino Weather station solution.

795

796

Users only need to connect WSS-01 RS485 interface to WSC1-L. The weather station main

797

798

processor WSC1-L can detect and upload the rainfall to the IoT Server via wireless LoRaWAN protocol

799

800

801

The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs

802

803

to screw up and adjust the bottom horizontally.

804

805

806

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit.

=== 6.1.1 Feature ===

811

* RS485 Rain Gauge

812

* Small dimension, easy to install

813

* Vents under funnel, avoid leaf or other things to avoid rain flow.

814

* ABS enclosure.

815

* Horizontal adjustable.

=== 6.1.2 Specification ===

822

* Resolution: 0.2mm

823

* Accuracy: ±3%

824

* Rainfall strength: 0mm～4mm/min (max 8mm/min)

825

* Input Power: DC 5~~24v

826

* Interface: RS485

827

* Working Temperature: 0℃～70℃ ( incorrect below 0 degree, because water become ICE)

828

* Working Humidity: <100% (no dewing)

829

* Power Consumption: 4mA @ 12v.

=== 6.1.3 Dimension ===

836

837

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.jpg||alt="c2d3aee592ccc873bea6dd891451df2"]]

1.

11.

111. Pin Mapping

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

=== 6.1.5 Installation Notice ===

849

850

Do not power on while connect the cables. Double check the wiring before power on.

851

852

Installation Photo as reference:

853

854

855

**(% style="color:#4472C4" %) Install on Ground:**

856

857

WSS-01 Rain Gauge include screws so can install in ground directly .

858

859

860

**(% style="color:#4472C4" %) Install on pole:**

861

862

If user want to install on pole, they can purchase the **(% style="color:#4472C4" %) WS-K2 : Bracket Kit for Pole installation**(%%), and install as below:

863

864

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]

865

866

867

WS-K2: Bracket Kit for Pole installation:

868

869

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]

870

871

WSSC-K2 dimension document, please see:

872

873

https:~/~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Weather_Station/

== 6.2 Wind Speed/Direction ~-~- WSS-02 ==

878

879

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]

880

881

WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.

882

883

884

WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection

885

886

887

Users only need to connect WSS-02 RS485 interface to WSC1-L. The weather station main

888

889

processor WSC1-L can detect and upload the wind speed and direction to the IoT Server via wireless LoRaWAN protocol.

890

891

892

=== 6.2.1 Feature ===

893

* RS485 wind speed / direction sensor

894

* PC enclosure, resist corrosion

=== 6.2.2 Specification ===

901

* Wind speed range: 0 ~~ 30m/s, (always show 30m/s for higher speed)

902

* Wind direction range: 0 ~~ 360°

903

* Start wind speed: ≤0.3m/s

904

* Accuracy: ±（0.3＋0.03V）m/s , ±1°

905

* Input Power: DC 5~~24v

906

* Interface: RS485

907

* Working Temperature: -30℃～70℃

908

* Working Humidity: <100% (no dewing)

909

* Power Consumption: 13mA ~~ 12v.

910

* Cable Length: 2 meters

=== 6.2.3 Dimension ===

917

918

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]][[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]

919

920

921

=== 6.2.4 Pin Mapping ===

922

923

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

924

925

926

=== 6.2.4 Angle Mapping ===

927

928

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]

929

930

931

=== 6.2.5 Installation Notice ===

932

933

Do not power on while connect the cables. Double check the wiring before power on.

934

935

936

The sensor must be installed with below direction, towards North.

|(((

North

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]

== 6.3 CO2/PM2.5/PM10 ~-~- WSS-03 ==

953

954

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

955

956

957

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

958

959

960

WSS-03 is designed to support the Dragino Weather station solution.

961

962

Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main

963

964

processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

965

966

967

=== 6.3.1 Feature ===

968

* RS485 CO2, PM2.5, PM10 sensor

969

* NDIR to measure CO2 with Internal Temperature Compensation

970

* Laser Beam Scattering to PM2.5 and PM10

=== 6.3.2 Specification ===

977

* CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）

978

* CO2 resolution: 1ppm

979

* PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）

980

* PM2.5/PM10 resolution: 1μg/m3

981

* Input Power: DC 7 ~~ 24v

982

* Preheat time: 3min

983

* Interface: RS485

984

* Working Temperature:

985

** CO2: 0℃～50℃;

986

** PM2.5/PM10: -30 ~~ 50℃

987

* Working Humidity:

988

** PM2.5/PM10: 15～80%RH (no dewing)

989

** CO2: 0～95%RH

990

* Power Consumption: 50mA@ 12v.

=== 6.3.3 Dimension ===

997

998

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]

999

1000

1001

=== 6.3.4 Pin Mapping ===

1002

1003

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11.

111. Installation Notice

1009

1010

Do not power on while connect the cables. Double check the wiring before power on.

1011

1012

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]

1013

1014

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

1.

11. Rain/Snow Detect ~-~- WSS-04

1023

1024

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.

1025

1026

1027

WSS-04 has auto heating feature, this ensures measurement more reliable.

1028

1029

1030

WSS-04 is designed to support the Dragino Weather station solution.

1031

1032

Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main

1033

1034

processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

*

*1.

*11. Feature

* RS485 Rain/Snow detect sensor

1042

* Surface heating to dry

1043

* grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

*

*1.

*11. Specification

* Detect if there is rain or snow

1049

* Input Power: DC 12 ~~ 24v

1050

* Interface: RS485

1051

* Working Temperature: -30℃～70℃

1052

* Working Humidity: 10～90%RH

1053

* Power Consumption:

1054

** No heating: 12mA @ 12v,

1055

** heating: 94ma @ 12v.

1.

11.

111. Dimension

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]

1.

11.

111. Pin Mapping

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11.

111. Installation Notice

1074

1075

Do not power on while connect the cables. Double check the wiring before power on.

1076

1077

1078

Install with 15°degree.

1079

1080

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]

1081

1082

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]

1.

11.

111. Heating

WSS-04 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃).

1.

11. Temperature, Humidity, Illuminance, Pressure ~-~- WSS-05

1099

1100

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

1101

1102

1103

WSS-05 is designed to support the Dragino Weather station solution.

1104

1105

Users only need to connect WSS-05 RS485 interface to WSC1-L. The weather station main

1106

1107

processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

*

*1.

*11. Feature

* RS485 Temperature, Humidity, Illuminance, Pressure sensor

*

*1.

*11. Specification

* Input Power: DC 12 ~~ 24v

1119

* Interface: RS485

1120

* Temperature Sensor Spec:

** Range: -30 ~~ 70℃

** resolution 0.1℃

** Accuracy: ±0.5℃

* Humidity Sensor Spec:

1125

** Range: 0 ~~ 100% RH

1126

** resolution 0.1 %RH

1127

** Accuracy: 3% RH

1128

* Pressure Sensor Spec:

1129

** Range: 10～1100hPa

1130

** Resolution: 0.1hPa

1131

** Accuracy: ±0.1hPa

1132

* Illuminate sensor:

1133

** Range: 0～2/20/200kLux

1134

** Resolution: 10 Lux

1135

** Accuracy: ±3％FS

1136

* Working Temperature: -30℃～70℃

1137

* Working Humidity: 10～90%RH

1138

* Power Consumption: 4mA @ 12v

1.

11.

111. Dimension

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]

1.

11.

111. Pin Mapping

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11.

111. Installation Notice

1157

1158

Do not power on while connect the cables. Double check the wiring before power on.

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]

1163

1164

1165

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]

1.

11. Total Solar Radiation sensor ~-~- WSS-06

1170

1171

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

1172

1173

1174

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

1175

1176

1177

WSS-06 is designed to support the Dragino Weather station solution.

1178

1179

1180

Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main

1181

1182

processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

*

*1.

*11. Feature

* RS485 Total Solar Radiation sensor

1190

* Measure Total Radiation between 0.3～3μm（300～3000nm）

1191

* Measure Reflected Radiation if sense area towards ground.

*

*1.

*11. Specification

* Input Power: DC 5 ~~ 24v

1197

* Interface: RS485

1198

* Detect spectrum: 0.3～3μm（300～3000nm）

1199

* Measure strength range: 0～2000W/m2

1200

* Resolution: 0.1W/m2

1201

* Accuracy: ±3%

1202

* Yearly Stability: ≤±2％

1203

* Cosine response: ≤7％ (@ Sun angle 10°)

1204

* Temperature Effect: ±2％（－10℃～40℃）

1205

* Working Temperature: -40℃～70℃

1206

* Working Humidity: 10～90%RH

1207

* Power Consumption: 4mA @ 12v

1.

11.

111. Dimension

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1.

11.

111. Pin Mapping

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11.

111. Installation Notice

1227

1228

Do not power on while connect the cables. Double check the wiring before power on.

1229

1230

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1231

1232

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

1233

1234

1.

1235

11. PAR (Photosynthetically Available Radiation) ~-~- WSS-07

1236

1237

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

1238

1239

1240

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

WSS-07 is designed to support the Dragino Weather station solution.

1245

1246

1247

Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main

1248

1249

processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

1.

11.

111. Feature

PAR (Photosynthetically Available Radiation) sensor measure 400 ~~ 700nm wavelength nature light’s Photosynthetically Available Radiation.

1257

1258

1259

When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

*

*1.

*11. Specification

* Input Power: DC 5 ~~ 24v

1266

* Interface: RS485

1267

* Response Spectrum: 400～700nm

1268

* Measure range: 0～2500μmol/m2•s

1269

* Resolution: 1μmol/m2•s

1270

* Accuracy: ±2%

1271

* Yearly Stability: ≤±2％

1272

* Working Temperature: -30℃～75℃

1273

* Working Humidity: 10～90%RH

1274

* Power Consumption: 3mA @ 12v

1.

11.

111. Dimension

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]

1.

11.

111. Pin Mapping

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]

1.

11.

111. Installation Notice

1293

1294

Do not power on while connect the cables. Double check the wiring before power on.

1295

1296

1297

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]

1298

1299

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]

= 7. FAQ =

== 7.1 What else do I need to purchase to build Weather Station? ==

1305

1306

Below is the installation photo and structure:

1307

1308

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]

1309

1310

1311

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]

== 7.2 How to upgrade firmware for WSC1-L? ==

1317

1318

Firmware Location & Change log:

1319

1320

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/WSC1-L/]]

1321

1322

1323

Firmware Upgrade instruction:

1324

1325

[[https:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Hardware_Upgrade_Method_Support_List]]

1326

1327

1328

== 7.3 How to change the LoRa Frequency Bands/Region? ==

1329

1330

User can follow the introduction for how to upgrade image. When download the images, choose the required image file for download.

== 7.4 Can I add my weather sensors? ==

1335

1336

Yes, connect the sensor to RS485 bus and see instruction: [[add sensors.>>path:#Add_sensor]]

1337

1338

1339

= 8. Trouble Shooting =

= 9. Order Info =

== 9.1 Main Process Unit ==

1350

1351

Part Number: **WSC1-L-XX**

1352

1353

**XX**: The default frequency band

1354

1355

* **AS923**: LoRaWAN AS923 band

1356

* **AU915**: LoRaWAN AU915 band

1357

* **EU433**: LoRaWAN EU433 band

1358

* **EU868**: LoRaWAN EU868 band

1359

* **KR920**: LoRaWAN KR920 band

1360

* **US915**: LoRaWAN US915 band

1361

* **IN865**: LoRaWAN IN865 band

1362

* **CN470**: LoRaWAN CN470 band

== 9.2 Sensors ==

|**Sensor Model**|**Part Number**

1367

|**Rain Gauge**|WSS-01

1368

|**Rain Gauge installation Bracket for Pole**|WS-K2

1369

|**Wind Speed Direction 2 in 1 Sensor**|WSS-02

1370

|**CO2/PM2.5/PM10 3 in 1 Sensor**|WSS-03

1371

|**Rain/Snow Detect Sensor**|WSS-04

1372

|**Temperature, Humidity, illuminance and Pressure 4 in 1 sensor**|WSS-05

1373

|**Total Solar Radiation Sensor**|WSS-06

1374

|**PAR (Photosynthetically Available Radiation)**|WSS-07

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1380

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1381

1382

[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

= 11. Appendix I: Field Installation Photo =

1389

1390