Version 174.7 by Xiaoling on 2022/07/27 16:13

Hide last authors
Xiaoye 131.1 1 (% style="text-align:center" %)
2 [[image:1651802206983-860.png||height="427" width="398"]]
3
4
5 (((
Xiaoling 174.2 6
Xiaoye 131.1 7
8
9 )))
10
11 **Table of Contents:**
12
13 {{toc/}}
14
15
16 = **1. Introduction** =
17
18 == **1.1 What is HP0D** ==
19
Xiaoling 174.2 20
Xiaoye 131.1 21 (((
22 The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 )))
28
29 (((
30 (% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 )))
32
33 (((
34 HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
Xiaoling 174.2 35
36
Xiaoye 131.1 37 )))
38
39 == **1.2 Specifications** ==
40
41 **~ Hardware System:**
42 Linux Part:
43
44 * Raspberry Pi 4
45
46 **~ Interface:**
47
48 * 10M/100M RJ45 Ports x 1
49 * LoRaWAN Wireless
50 * Power Input: 12V 2A, DC
51
52 **~ Operating Condition:**
53
54 * Work Temperature: -20 ~~ 65°C
55 * Storage Temperature: -20 ~~ 65°C
56 * Power Input: 12V 2A, DC
57
58 == **1.3 Features** ==
59
60 * Open-Source Linux system
61 * RPi4 with 2G /4G or 8G RAM
62 * Managed by Web GUI, SSH via Internet
63 * Support Semtech UDP packet forwarder
64 * Support LoRaWAN Station Connection
65 * Support Helium Miner
66 * External fiberglass antenna
67 * Firmware OTA
68 * 802.3af PoE
69 * Lighting Protection
70 * Remote Monitoring
71 * Support Helium LoRaWAN server and secondary LoRaWAN server
72 * Include prepaid $40 onboarding cost and $10 location cost.
73 * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
74
75 == **1.4 Label info and login name** ==
76
Xiaoling 174.2 77
Xiaoye 131.1 78 [[image:1651803959860-394.png||height="500" width="375"]]
79
80
81
82 === 1.4.1 Label information: ===
83
Xiaoling 174.2 84
Xiaoye 131.1 85 **Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
86 **Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
87 **Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
88 **Miner address**:  (% class="mark" %)12xxxxxx(%%)
89 **Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
90 **Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
91 **SN**:  (% class="mark" %)device serial number.
92
93
Xiaoling 174.2 94
Xiaoye 131.1 95 = **2. Quick Start & Onboarding** =
96
Xiaoling 174.2 97
Xiaoye 131.1 98 The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
99
100
101 == **2.1  Connect HP0D Web UI** ==
102
103
Xiaoling 174.3 104 === **2.1.1 via HP0D's Access Point** ===
105
106
Xiaoye 131.1 107 At the first boot of HP0D, it will auto-generate a Wi-Fi network
108
109
110 [[image:1651804327535-321.png||height="325" width="199"]]
111
112
113 (% class="box infomessage" %)
114 (((
115 called  : **//HPD-dragino-xxxxxx//**
116 )))
117
118 (% class="box infomessage" %)
119 (((
120 with password:  **//dragino+dragino//**
121 You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
122 )))
123
124
125 [[image:1651804397792-591.png||height="386" width="733"]]
126
127
Xiaoling 174.2 128
Xiaoye 131.1 129 === **2.1.2 Connect via HP0D hostname** ===
130
Xiaoling 174.2 131
Xiaoye 131.1 132 Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
133
134 Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
135
136
137 [[image:1651804629009-699.png]]
138
Xiaoling 174.2 139
140
Xiaoye 131.1 141 === **2.1.3 Connect via Ethernet Port** ===
142
Xiaoling 174.2 143
Xiaoye 131.1 144 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
145
146
147 //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
148
149
150 [[image:1651804782523-623.png]]
151
152
Xiaoling 174.2 153
Xiaoye 131.1 154 == **2.2 Generate QR Code** ==
155
156
157 (((
Xiaoling 174.3 158 //Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
Xiaoye 131.1 159 )))
160
161 (((
Xiaoling 174.3 162 (% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
Xiaoye 131.1 163
164
165 )))
166
167 [[image:image-20220506140312-1.png||height="435" width="438"]]
168
169
Xiaoling 174.2 170
Xiaoye 131.1 171 == **2.3 Onboarding Hotspot** ==
172
173
174 (((
175 //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
176 )))
177
178 (((
Xiaoling 174.2 179 (% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
Xiaoye 131.1 180
181
182 )))
183
184 (((
Xiaoling 174.2 185 //**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
Xiaoye 131.1 186
187
188 )))
189
190 [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
191
192
Xiaoling 174.2 193
Xiaoye 131.1 194 //**3. **Scan the QR Code you generated in the previous step.//
195
196 [[image:1651828211026-220.png||height="405" width="191"]]
197
198
Xiaoling 174.2 199
Xiaoye 131.1 200 (((
201 //**4. **Onboarding your device//
202 )))
203
204 (((
205 Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
206
207
208 )))
209
210 [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
211
212 [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
213
214
215 **5. **//Check onboarding status where you can check from mobile~://
216
217 [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
218
219
220 //You can also see the hotspot status in the below link~://
221
222 //https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
223
224 //Example~://
225
226
227 **//Green Synced means hotspot works normally.//**
228
229 [[image:1651828427715-679.png||height="374" width="635"]]
230
231
Xiaoling 174.4 232
Xiaoye 131.1 233 == **2.4 Set the Port Forwarding** ==
234
235
236 (((
237 //Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
238 )))
239
240 [[image:1651828514449-658.png]]
241
242 (((
243
244 )))
245
246 (((
Xiaoling 174.4 247 (% style="color:red" %)**Note: Please refer to more detailed Settings**
Xiaoye 131.1 248 )))
249
250 (((
251 [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
252 )))
253
254 (((
255 [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
256
Xiaoling 174.4 257
Xiaoye 131.1 258
259 )))
260
261 = **3. Check the configuration of HP0D** =
262
263 == **3.1 LoRa frequency configuration** ==
264
265
266 [[image:1651828687205-178.png||height="323" width="657"]]
267
268
Xiaoling 174.5 269
Xiaoye 131.1 270 == **3.2 Check the LoRaWAN Server Address** ==
271
272
273 [[image:image-20220607160428-1.png||height="472" width="654"]]
274
275
Xiaoling 174.5 276
Xiaoye 131.1 277 == **3.2.1 Configure the Secondary LoRaWAN Server** ==
278
Xiaoling 174.5 279
Xiaoye 131.1 280 [[image:image-20220607161130-2.png||height="501" width="1112"]]
281
Xiaoye 160.1 282
Xiaoye 131.1 283 [[image:image-20220607161603-3.png||height="557" width="1113"]]
284
Xiaoye 160.1 285
Xiaoye 131.1 286 [[image:image-20220607161812-4.png||height="699" width="1115"]]
287
288
289
290 == **3.3 Check Miner configuration** ==
291
292
293 [[image:image-20220506181408-1.png||height="451" width="513"]]
294
Xiaoling 174.5 295
Xiaoye 131.1 296 (((
Xiaoling 174.5 297 (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
Xiaoye 131.1 298
299
Xiaoling 174.5 300
Xiaoye 131.1 301 == **//3.4 Check the Miner state//** ==
302
303
304 [[image:image-20220531171836-9.png||height="776" width="1155"]]
305
306
Xiaoling 174.5 307 (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly**//
Xiaoye 131.1 308
Xiaoling 174.5 309 (% style="color:red" %)//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
Xiaoye 131.1 310
Xiaoling 174.5 311 (% style="color:red" %)** //usually, the nat_type should be '//**(% style="color:blue" %)**//none'//**
Xiaoye 131.1 312
Xiaoling 174.5 313
Xiaoye 131.1 314
315 )))
316
317 = **4. Installation of Antenna** =
318
319
320 (((
321 //HP0D uses Fiber Glass Antenna.//
322 )))
323
324 [[image:1651832158606-882.png]]
325
326 (((
327
328 )))
329
330 (((
Xiaoling 174.5 331 //The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
Xiaoye 131.1 332 )))
333
334 (((
335 [[image:1651832205608-998.png||height="349" width="198"]]
336
Xiaoling 174.5 337
Xiaoye 131.1 338
339 )))
340
341 = **5. SSH Access for Linux console** =
342
343
344 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
345
346 //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
347
348 //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
349
350 //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
351
352
353 Below are screenshots:
354
355 [[image:image-20220608202027-1.png]]
356
357 (((
358 **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
359 )))
360
361 (((
362 //Port:  22//
363 )))
364
365 (((
366 //User Name:      (% style="color:green" %)**root**//
367 )))
368
369 (((
370 //Password:         (% style="color:green" %)**Randomly generated (found on device’s label)**//
371
372
373 )))
374
375 (((
376 //After logging in, you will be in the Linux console and can enter commands as shown below.//
377
378
379 )))
380
381 [[image:image-20220608202118-2.png]]
382
383
Xiaoling 174.6 384
Xiaoye 131.1 385 = **6. How to change the Wireless function of HP0D** =
386
Xiaoling 174.6 387
Xiaoye 131.1 388 //The wireless function is configured as AP by default and the web page does not support configuration,//
389
390 //if you want to configure it as STA(client)connection mode,//
391
Xiaoling 174.6 392 //you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
Xiaoye 131.1 393
394
Xiaoling 174.6 395 (% style="color:red" %)**//Note: the wireless state is as AP//**
Xiaoye 131.1 396
397 [[image:image-20220531170243-5.png||height="469" width="967"]]
398
399
Xiaoling 174.6 400
Xiaoye 131.1 401 == **6.1 Access WiFi configuration page** ==
402
403
404 [[image:image-20220531165803-2.png]]
405
406
Xiaoling 174.6 407
Xiaoye 131.1 408 == **6.2 Enter your WiFi information and save** ==
409
410
411 [[image:image-20220531165958-3.png]]
412
413
Xiaoling 174.6 414
Xiaoye 131.1 415 == **6.3 Change the WiFi mode.** ==
416
417
418 [[image:image-20220531170131-4.png]]
419
Xiaoling 174.6 420
421
Xiaoye 131.1 422 == **6.4 Wait system to restart** ==
423
424
425 [[image:image-20220531170501-7.png]]
426
427
Xiaoling 174.6 428 (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
Xiaoye 131.1 429
430
Xiaoling 174.6 431
Xiaoye 131.1 432 == **6.5 Check the STA state** ==
433
434
435 [[image:image-20220531170705-8.png||height="484" width="990"]]
436
437
Xiaoling 174.6 438
Xiaoye 131.1 439 = **7. Trouble Shootings** =
440
441 == **7.1 How to get a wallet address?** ==
442
443
444 **//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
445
446
Xiaoling 174.6 447
Xiaoye 131.1 448 == **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
449
450
451 (((
452 //Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
453 )))
454
455 (((
456 //If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
457
Xiaoling 174.6 458
Xiaoye 131.1 459
460 )))
461
462 == **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
463
464
465 [[image:image-20220506182042-2.png||height="250" width="516"]]
466
467 [[image:1651832455372-647.png||height="224" width="520"]]
468
469
470 **//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
471
472 **//It might relate to the network which might be up to 10mins.//**
473
474
Xiaoling 174.6 475
Xiaoye 131.1 476 == **7.4 Onboarding – Bad Gateway** ==
477
478
479 [[image:1651832583790-633.png]]
480
481
482 //**This is caused by the process leading too long which just needs to refresh the page.**//
483
484
Xiaoling 174.6 485
Xiaoye 131.1 486 == **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
487
488
489 [[image:image-20220506182424-3.png]]
490
491
492 (((
493 //**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
494
Xiaoling 174.6 495
Xiaoye 131.1 496
497 )))
498
499 == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
500
Xiaoling 174.6 501
Xiaoye 131.1 502 [[image:1651832742262-209.png||height="297" width="365"]]
503
504
505 (((
Xiaoling 174.6 506 //**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
Xiaoye 131.1 507
Xiaoling 174.6 508
Xiaoye 131.1 509
510 )))
511
512 == **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
513
514
515 [[image:1651832811038-780.png||height="462" width="216"]]
516
517
518 (((
Xiaoling 174.6 519 //**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
Xiaoye 131.1 520
Xiaoling 174.6 521
Xiaoye 131.1 522
523 )))
524
Xiaoling 174.6 525 == **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
Xiaoye 131.1 526
527
528 (((
529 //**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
530
531
532 )))
533
534 (((
Xiaoling 174.6 535 //**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
Xiaoye 131.1 536 )))
537
538 [[image:1651832880009-473.png]]
539
540
541
Xiaoling 174.6 542 == **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
Xiaoye 131.1 543
Xiaoling 174.6 544
Xiaoye 131.1 545 **//This is caused by the server connection delay, which does not affect the regular use.//**
546
547 [[image:1651832959907-357.png]]
548
549
Xiaoling 174.6 550
Xiaoye 131.1 551 == **7.10 Mobile APP crash after scanning the QR Code?** ==
552
553
554 * //**Make sure you have input the correct Wallet address to generate QR Code.**//
555 * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
Xiaoling 174.6 556 * //**Make sure your mobile app's relevant permission is enabled.**//
Xiaoye 131.1 557 * //**Known: The Android 11 version may cause this kind of issue.**//
558
559 == **7.11 Why the frequency/region is not the same as what I purchased?** ==
560
561
562 (((
563 //**Each HP0D is inspected and configured prior to shipping.**//
564 )))
565
566 (((
567 //**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
568
Xiaoling 174.6 569
Xiaoye 131.1 570
571 )))
572
573 == **7.12 Can use the frequency to a region where is no support?** ==
574
575
576 (((
577 //**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
578 )))
579
580 (((
581 [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
582
Xiaoling 174.6 583
Xiaoye 131.1 584
585 )))
586
587 == **7.13 Can change the frequency of the HP0D Miner?** ==
588
589
590 //We do not recommend doing this, it may damage your device//
591
592
Xiaoling 174.6 593
Xiaoye 131.1 594 == **7.14 Low Reward and not transmit issue** ==
595
596
597 //We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
598
599 //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
600
601 [[image:image-20220527114519-1.png||height="579" width="851"]]
602
603
Xiaoling 174.6 604
Xiaoye 131.1 605 == **7.15 Why is my miner version not the latest** ==
606
607
608 //By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
609
610 //However, the download and upgrade may fail due to the network.//
611
Xiaoye 150.1 612 You can reboot your hotspot where the hotspot will try to upgrade when per booting.
Xiaoye 140.1 613
Xiaoye 131.1 614
Xiaoye 150.1 615 //and **We offer manual check methods:**//
Xiaoye 131.1 616
Xiaoye 150.1 617 **// Use the "draginoups" command to check//**
Xiaoye 140.1 618
619
Xiaoling 174.6 620 (% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
Xiaoye 141.1 621
Xiaoling 174.6 622
Xiaoye 131.1 623 [[image:image-20220601101358-1.png]]
624
625
626
Xiaoye 145.2 627 == **7.16 Why is my miner running down?** ==
628
Xiaoling 174.6 629
Xiaoye 145.2 630 //the default, the Miner is managed by docker.//
631
632 //If you find the miner is offline where the miner is running down.//
633
634
635 **What You can do?**
636
Xiaoling 174.6 637 (% style="color:blue" %)**1. Reboot the hotspot and check again.**
Xiaoye 145.2 638
Xiaoye 149.1 639 //Usually, if the miner is just down, then a reboot is the quickest way//
Xiaoye 145.2 640
641
Xiaoling 174.6 642 (% style="color:blue" %)**2. Reinstall the Miner manually.**
Xiaoye 145.2 643
Xiaoye 149.1 644 //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
Xiaoye 145.2 645
Xiaoye 149.1 646 **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
647
648
Xiaoling 174.6 649 **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
Xiaoye 149.1 650
651
652
Xiaoye 145.2 653 [[image:image-20220610094825-2.png||height="457" width="835"]]
654
Xiaoling 174.6 655
Xiaoye 145.2 656 [[image:image-20220610094755-1.png||height="706" width="834"]]
657
658
Xiaoling 174.6 659
Edwin Chen 163.1 660 == **7.17 More commands for debugging.** ==
Xiaoye 145.2 661
662
Xiaoye 148.1 663 **I'm trapped somewhere, what can I do first?**
664
665
666 //dragino provides a method of self-testing//
667
668 //1.) Is Hotspot's Miner running?//
669
670 //2). Is the miner version up to date?//
671
672 //3). Is the height gap between local height and remote height kept within 100//
673
674
Xiaoling 174.6 675 (% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
Xiaoye 148.1 676
677
Xiaoye 147.1 678 (% class="box infomessage" %)
679 (((
680 minerup update  #~-~-> reinstall miner but not clearing memory
681 minerup flush  #~-~->  reinstall miner and clear memory
682 minerup snap  #~-~->  load a snap_short to sync the block height
Xiaoye 148.1 683 minerup gap  #~-~->  check the height between local and remote.
684 draginoup  #~-~->  check the miner version gap between local and remote.
Xiaoye 155.1 685
686
687 doker ps  #~-~-> show the miner running state
688 miner versions  #~-~-> show the miner  version
Xiaoye 147.1 689 )))
690
691
Xiaoling 174.6 692
Xiaoye 161.1 693 == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
Xiaoye 147.1 694
Xiaoye 161.1 695
696 //**This is the result of the OTA not being updated in time**//
697
698 //**You can reboot your hotspot or upgrade these packages manually.**//
699
700
701 (% class="box infomessage" %)
702 (((
703 **apt update**
704 **apt install dragino***
705 )))
706
707
Xiaoling 174.6 708
Xiaoye 155.1 709 = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
Xiaoye 131.1 710
Xiaoling 174.6 711
Xiaoye 131.1 712 The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
713
714 So you have to re-flash the image into the SD card.
715
Xiaoling 174.6 716 (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
Xiaoye 131.1 717
Xiaoye 139.1 718
Xiaoling 174.6 719 (% style="color:blue" %)//**Preparations:**//
Xiaoye 131.1 720
721 1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
722
723 2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
724
725 3. //A card reader device//
726
727 4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
728
729 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
730
731
Xiaoling 174.6 732 (% style="color:blue" %)**HP0D's enclosure**
Xiaoye 158.1 733
734
735 [[image:image-20220615204902-1.png||height="633" width="918"]]
736
737
738 [[image:image-20220615204917-2.png||height="1038" width="922"]]
739
740
741
Xiaoling 174.6 742 === (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
Xiaoye 131.1 743
744
745 [[image:image-20220609111027-9.png]]
746
747
Xiaoling 174.7 748
Xiaoling 174.6 749 === (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
Xiaoye 131.1 750
751
752 [[image:image-20220609104907-8.png]]
753
754
Xiaoling 174.7 755
Xiaoling 174.6 756 === (% style="color:blue" %)**Step 3. Select the target **(%%) ===
Xiaoye 131.1 757
758
759 [[image:image-20220609104637-2.png]]
760
761 [[image:image-20220609104701-3.png]]
762
763
Xiaoling 174.7 764
Xiaoling 174.6 765 === (% style="color:blue" %)**Step 4. Flash start**(%%) ===
Xiaoye 131.1 766
767
768 [[image:image-20220609104727-4.png]]
769
770 [[image:image-20220609104741-5.png]]
771
772
Xiaoling 174.6 773 === (% style="color:blue" %)**Flash Complete**(%%) ===
Xiaoye 131.1 774
775
776 [[image:image-20220609104415-1.png]]
777
778
779 == **Step 4. Re-install the SD card into the hotspot and boot it** ==
780
781
Xiaoling 174.6 782
Xiaoye 131.1 783 == **Step 5. Configure the correct region for the miner** ==
784
Xiaoling 174.6 785
Xiaoye 131.1 786 **by the default, the factory settings apply to the US915.**
787
788 **if your region is not the US915, you have to configure the correct region for the miner.**
789
790
791 **Access the hotspot CLI, and run these Linux commands**
792
793
Xiaoye 132.1 794 (% class="box infomessage" %)
795 (((
Xiaoye 131.1 796 ~#~##update the software of dragino
797
798 apt update
799
800 apt install dragino*
Xiaoye 132.1 801 )))
Xiaoye 131.1 802
803 [[image:image-20220609150452-2.png||height="348" width="909"]]
804
805
806
Xiaoye 132.1 807 (% class="box infomessage" %)
808 (((
Xiaoye 131.1 809 ~#~##configure the correct region for the miner and update it
810
Xiaoye 138.1 811 uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
Xiaoye 131.1 812
813 uci commit miner
814
815 minerup update
Xiaoye 132.1 816 )))
Xiaoye 131.1 817
Xiaoye 137.1 818 [[image:image-20220609151513-5.png]]
Xiaoye 131.1 819
820
Xiaoling 174.6 821
Xiaoye 132.1 822 (% class="box infomessage" %)
823 (((
Xiaoye 131.1 824 ~#~##check the miner version
825
826 draginoups
Xiaoye 132.1 827 )))
Xiaoye 131.1 828
Xiaoye 135.1 829 [[image:image-20220609151419-3.png]]
Xiaoye 131.1 830
Xiaoye 143.1 831
Xiaoling 174.6 832
Xiaoye 143.1 833 (% class="box infomessage" %)
834 (((
835 ~#~##unblock the function of wireless
836 rfkill unblock wlan
837 uci set wireless.general.mode=ap
838 uci commit wireless
839 )))
840
841 [[image:image-20220609161204-1.png]]
842
Xiaoye 131.1 843
Xiaoye 160.1 844
Xiaoye 174.1 845 = **9. How does the HP0D access to the network via a USB 4G Dongle** =
Xiaoye 160.1 846
Xiaoling 174.6 847
Xiaoye 172.1 848 We have reserved enough space inside the HP0D to use a USB 4G Dongle,
849
850 so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
851
852
Xiaoling 174.6 853 (% style="color:green" %)//**Preparations:**//
Xiaoye 172.1 854
855 //**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
856
857 //**2). A Sim card that can access the 4g network.**//
858
859 //**3). open the hotspot's shell.**//
860
861
Xiaoling 174.6 862
Xiaoye 172.1 863 == **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
864
Xiaoling 174.6 865
Xiaoye 172.1 866 [[image:image-20220627153334-2.png]]
867
868
Xiaoling 174.6 869
Xiaoye 172.1 870 == **9.2. Checking the USB 4G Dongle network** ==
871
Xiaoling 174.6 872
Xiaoye 172.1 873 We have installed drivers for common USB 4G Dongle,
874
875 and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
876
877
Xiaoling 174.6 878 **//HUAWEI-E3327//**
Xiaoye 172.1 879
880 [[image:image-20220627154526-9.png||height="762" width="725"]]
881
882
883
Xiaoling 174.6 884 **//ZTE//**
885
Xiaoye 172.1 886 [[image:image-20220627154201-5.png]]
887
888
889
890 = **10. PoE introduction** =
891
892
Xiaoling 174.6 893 //The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
Xiaoye 160.1 894
Xiaoye 161.1 895 //So you can use the PoE //switches// or PoE injector to power the device.//
Xiaoye 160.1 896
897
Xiaoling 174.6 898 (((
899 (% style="color:red" %)**Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
900 )))
Xiaoye 160.1 901
902
Xiaoling 174.6 903 (% style="background-color:yellow" %)**Wiring schematic:**
Xiaoye 160.1 904
905 [[image:image-20220616143347-1.png]]
906
907
908
909
Xiaoye 173.1 910 = **11. OTA Version Info** =
Xiaoye 160.1 911
Xiaoling 174.6 912
Xiaoye 131.1 913 == **When does the OTA update happen?** ==
914
915
916 **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
917
Xiaoling 174.6 918
919
Xiaoye 131.1 920 == **# 2022/05/14** ==
921
922
923 1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
924 1. //Add postinst after auto-update//
925 1. //Add Miner version mark.//
926 1. //Add fast sync if miner GAP is large//
927
Xiaoling 174.6 928
Kilight Cao 152.1 929 == **# 2022/05/18** ==
930
931
932 1. //Update minerup to speed up synchronized blocks//
933
Xiaoling 174.6 934
Xiaoye 131.1 935 == **# 2022/05/24** ==
936
Kilight Cao 151.1 937
Kilight Cao 152.1 938 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
Xiaoye 131.1 939
Xiaoling 174.6 940
Kilight Cao 151.1 941 == **# 2022/05/31** ==
Xiaoye 131.1 942
Xiaoling 174.6 943
Kilight Cao 152.1 944 1. //Add WiFi STA icon display//
945 1. //Optimize AP icon display//
946 1. //Optimize home icon display//
947 1. //Fix for Miner icon URL bug//
948 1. //Add the secondary server configuration//
Kilight Cao 151.1 949
Xiaoling 174.6 950
Xiaoye 173.1 951 = **12. Supports** =
Xiaoye 131.1 952
Xiaoling 174.6 953
Xiaoye 131.1 954 (((
955 **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
956 )))
957
958 (((
959 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
960
Xiaoling 174.6 961
Xiaoye 131.1 962
963 )))
964
Xiaoye 173.1 965 = **13. Order Info** =
Xiaoye 131.1 966
967
Xiaoling 174.6 968 (% style="color:blue" %)**HP0D-XXX**
Xiaoye 131.1 969
Xiaoling 174.6 970 (% style="color:blue" %)**XXX**(%%): Frequency Band
Xiaoye 131.1 971
Xiaoling 174.6 972 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
973 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
974 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
975 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
976 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
977 * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
978
Xiaoye 173.1 979 = **14. Manufacturer Info** =
Xiaoye 131.1 980
Xiaoling 174.6 981
Xiaoye 131.1 982 (((
983 **Shenzhen Dragino Technology Development co. LTD**
984 )))
985
986 (((
987 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
988 )))
989
990 (((
991 Longcheng Street, LongGang District; Shenzhen 518116, China
992
993
994
995 )))
996
Xiaoye 173.1 997 = **15. FCC Warning** =
Xiaoye 131.1 998
Xiaoling 174.6 999
Xiaoye 131.1 1000 (((
1001 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1002 )))
1003
1004 (((
1005 ~-~- Reorient or relocate the receiving antenna.
1006 )))
1007
1008 (((
1009 ~-~- Increase the separation between the equipment and receiver.
1010 )))
1011
1012 (((
1013 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1014 )))
1015
1016 (((
1017 ~-~- Consult the dealer or an experienced radio/TV technician for help.
1018 )))
1019
1020 (((
1021 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1022 )))
1023
1024 (((
1025 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1026 )))