Version 174.23 by Xiaoling on 2022/07/27 17:44

Hide last authors
Xiaoye 131.1 1 (% style="text-align:center" %)
2 [[image:1651802206983-860.png||height="427" width="398"]]
3
4
5 (((
Xiaoling 174.2 6
Xiaoye 131.1 7
8
9 )))
10
11 **Table of Contents:**
12
13 {{toc/}}
14
15
16 = **1. Introduction** =
17
18 == **1.1 What is HP0D** ==
19
Xiaoling 174.2 20
Xiaoye 131.1 21 (((
22 The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 )))
28
29 (((
30 (% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 )))
32
33 (((
34 HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
Xiaoling 174.2 35
36
Xiaoye 131.1 37 )))
38
39 == **1.2 Specifications** ==
40
41 **~ Hardware System:**
42 Linux Part:
43
44 * Raspberry Pi 4
45
46 **~ Interface:**
47
48 * 10M/100M RJ45 Ports x 1
49 * LoRaWAN Wireless
50 * Power Input: 12V 2A, DC
51
52 **~ Operating Condition:**
53
54 * Work Temperature: -20 ~~ 65°C
55 * Storage Temperature: -20 ~~ 65°C
56 * Power Input: 12V 2A, DC
57
58 == **1.3 Features** ==
59
60 * Open-Source Linux system
61 * RPi4 with 2G /4G or 8G RAM
62 * Managed by Web GUI, SSH via Internet
63 * Support Semtech UDP packet forwarder
64 * Support LoRaWAN Station Connection
65 * Support Helium Miner
66 * External fiberglass antenna
67 * Firmware OTA
68 * 802.3af PoE
69 * Lighting Protection
70 * Remote Monitoring
71 * Support Helium LoRaWAN server and secondary LoRaWAN server
72 * Include prepaid $40 onboarding cost and $10 location cost.
73 * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
74
75 == **1.4 Label info and login name** ==
76
Xiaoling 174.2 77
Xiaoye 131.1 78 [[image:1651803959860-394.png||height="500" width="375"]]
79
80
81
82 === 1.4.1 Label information: ===
83
Xiaoling 174.2 84
Xiaoling 174.12 85 (((
Xiaoye 131.1 86 **Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
87 **Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
88 **Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
89 **Miner address**:  (% class="mark" %)12xxxxxx(%%)
90 **Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
91 **Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
92 **SN**:  (% class="mark" %)device serial number.
Xiaoling 174.12 93 )))
Xiaoye 131.1 94
95
Xiaoling 174.2 96
Xiaoye 131.1 97 = **2. Quick Start & Onboarding** =
98
Xiaoling 174.2 99
Xiaoling 174.13 100 (((
Xiaoye 131.1 101 The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
Xiaoling 174.13 102 )))
Xiaoye 131.1 103
104
105 == **2.1  Connect HP0D Web UI** ==
106
107
Xiaoling 174.3 108 === **2.1.1 via HP0D's Access Point** ===
109
110
Xiaoye 131.1 111 At the first boot of HP0D, it will auto-generate a Wi-Fi network
112
113
114 [[image:1651804327535-321.png||height="325" width="199"]]
115
116
117 (% class="box infomessage" %)
118 (((
119 called  : **//HPD-dragino-xxxxxx//**
120 )))
121
122 (% class="box infomessage" %)
123 (((
124 with password:  **//dragino+dragino//**
125 You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
126 )))
127
128
129 [[image:1651804397792-591.png||height="386" width="733"]]
130
131
Xiaoling 174.2 132
Xiaoye 131.1 133 === **2.1.2 Connect via HP0D hostname** ===
134
Xiaoling 174.2 135
Xiaoling 174.14 136 (((
137 Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
138 )))
Xiaoye 131.1 139
Xiaoling 174.15 140 Like: (% style="background-color:yellow" %)__**//http:~/~/dragino-4ba54a//**__
Xiaoye 131.1 141
142
143 [[image:1651804629009-699.png]]
144
Xiaoling 174.2 145
146
Xiaoye 131.1 147 === **2.1.3 Connect via Ethernet Port** ===
148
Xiaoling 174.2 149
Xiaoling 174.16 150 (((
151 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
152 )))
Xiaoye 131.1 153
154
Xiaoling 174.16 155 (((
Xiaoye 131.1 156 //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
Xiaoling 174.16 157 )))
Xiaoye 131.1 158
159
160 [[image:1651804782523-623.png]]
161
162
Xiaoling 174.2 163
Xiaoye 131.1 164 == **2.2 Generate QR Code** ==
165
166
167 (((
Xiaoling 174.3 168 //Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
Xiaoye 131.1 169 )))
170
171 (((
Xiaoling 174.3 172 (% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
Xiaoye 131.1 173
174
175 )))
176
177 [[image:image-20220506140312-1.png||height="435" width="438"]]
178
179
Xiaoling 174.2 180
Xiaoye 131.1 181 == **2.3 Onboarding Hotspot** ==
182
183
184 (((
185 //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
186 )))
187
188 (((
Xiaoling 174.2 189 (% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
Xiaoye 131.1 190
191
192 )))
193
194 (((
Xiaoling 174.2 195 //**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
Xiaoye 131.1 196
197
198 )))
199
200 [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
201
202
Xiaoling 174.2 203
Xiaoye 131.1 204 //**3. **Scan the QR Code you generated in the previous step.//
205
206 [[image:1651828211026-220.png||height="405" width="191"]]
207
208
Xiaoling 174.2 209
Xiaoye 131.1 210 (((
211 //**4. **Onboarding your device//
212 )))
213
214 (((
Xiaoling 174.10 215 Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
Xiaoye 131.1 216
217
218 )))
219
220 [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
221
222 [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
223
224
225 **5. **//Check onboarding status where you can check from mobile~://
226
227 [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
228
229
230 //You can also see the hotspot status in the below link~://
231
232 //https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
233
234 //Example~://
235
236
237 **//Green Synced means hotspot works normally.//**
238
239 [[image:1651828427715-679.png||height="374" width="635"]]
240
241
Xiaoling 174.4 242
Xiaoye 131.1 243 == **2.4 Set the Port Forwarding** ==
244
245
246 (((
247 //Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
248 )))
249
250 [[image:1651828514449-658.png]]
251
252 (((
253
254 )))
255
256 (((
Xiaoling 174.11 257 (((
Xiaoling 174.4 258 (% style="color:red" %)**Note: Please refer to more detailed Settings**
Xiaoye 131.1 259 )))
Xiaoling 174.11 260 )))
Xiaoye 131.1 261
262 (((
Xiaoling 174.11 263 (((
Xiaoye 131.1 264 [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
265 )))
Xiaoling 174.11 266 )))
Xiaoye 131.1 267
268 (((
Xiaoling 174.11 269 (((
Xiaoye 131.1 270 [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
Xiaoling 174.11 271 )))
Xiaoye 131.1 272
Xiaoling 174.4 273
Xiaoye 131.1 274
275 )))
276
277 = **3. Check the configuration of HP0D** =
278
279 == **3.1 LoRa frequency configuration** ==
280
281
282 [[image:1651828687205-178.png||height="323" width="657"]]
283
284
Xiaoling 174.5 285
Xiaoye 131.1 286 == **3.2 Check the LoRaWAN Server Address** ==
287
288
289 [[image:image-20220607160428-1.png||height="472" width="654"]]
290
291
Xiaoling 174.5 292
Xiaoye 131.1 293 == **3.2.1 Configure the Secondary LoRaWAN Server** ==
294
Xiaoling 174.5 295
Xiaoye 131.1 296 [[image:image-20220607161130-2.png||height="501" width="1112"]]
297
Xiaoye 160.1 298
Xiaoye 131.1 299 [[image:image-20220607161603-3.png||height="557" width="1113"]]
300
Xiaoye 160.1 301
Xiaoye 131.1 302 [[image:image-20220607161812-4.png||height="699" width="1115"]]
303
304
305
306 == **3.3 Check Miner configuration** ==
307
308
309 [[image:image-20220506181408-1.png||height="451" width="513"]]
310
Xiaoling 174.5 311
Xiaoye 131.1 312 (((
Xiaoling 174.5 313 (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
Xiaoye 131.1 314
315
Xiaoling 174.5 316
Xiaoye 131.1 317 == **//3.4 Check the Miner state//** ==
318
319
320 [[image:image-20220531171836-9.png||height="776" width="1155"]]
321
322
Xiaoling 174.11 323 (((
324 (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
325 )))
Xiaoye 131.1 326
327
328
329 )))
330
331 = **4. Installation of Antenna** =
332
333
334 (((
335 //HP0D uses Fiber Glass Antenna.//
336 )))
337
338 [[image:1651832158606-882.png]]
339
340 (((
341
342 )))
343
344 (((
Xiaoling 174.5 345 //The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
Xiaoye 131.1 346 )))
347
348 (((
349 [[image:1651832205608-998.png||height="349" width="198"]]
350
Xiaoling 174.5 351
Xiaoye 131.1 352
353 )))
354
355 = **5. SSH Access for Linux console** =
356
357
Xiaoling 174.17 358 (((
Xiaoye 131.1 359 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
Xiaoling 174.17 360 )))
Xiaoye 131.1 361
Xiaoling 174.17 362 (((
Xiaoye 131.1 363 //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
Xiaoling 174.17 364 )))
Xiaoye 131.1 365
Xiaoling 174.17 366 (((
Xiaoye 131.1 367 //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
Xiaoling 174.17 368 )))
Xiaoye 131.1 369
Xiaoling 174.17 370 (((
Xiaoye 131.1 371 //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
Xiaoling 174.17 372 )))
Xiaoye 131.1 373
374
375 Below are screenshots:
376
377 [[image:image-20220608202027-1.png]]
378
379 (((
380 **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
381 )))
382
383 (((
384 //Port:  22//
385 )))
386
387 (((
388 //User Name:      (% style="color:green" %)**root**//
389 )))
390
391 (((
392 //Password:         (% style="color:green" %)**Randomly generated (found on device’s label)**//
393
394
395 )))
396
397 (((
398 //After logging in, you will be in the Linux console and can enter commands as shown below.//
399
400
401 )))
402
403 [[image:image-20220608202118-2.png]]
404
405
Xiaoling 174.6 406
Xiaoye 131.1 407 = **6. How to change the Wireless function of HP0D** =
408
Xiaoling 174.6 409
Xiaoye 131.1 410 //The wireless function is configured as AP by default and the web page does not support configuration,//
411
412 //if you want to configure it as STA(client)connection mode,//
413
Xiaoling 174.6 414 //you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
Xiaoye 131.1 415
416
Xiaoling 174.6 417 (% style="color:red" %)**//Note: the wireless state is as AP//**
Xiaoye 131.1 418
419 [[image:image-20220531170243-5.png||height="469" width="967"]]
420
421
Xiaoling 174.6 422
Xiaoye 131.1 423 == **6.1 Access WiFi configuration page** ==
424
425
426 [[image:image-20220531165803-2.png]]
427
428
Xiaoling 174.6 429
Xiaoye 131.1 430 == **6.2 Enter your WiFi information and save** ==
431
432
433 [[image:image-20220531165958-3.png]]
434
435
Xiaoling 174.6 436
Xiaoye 131.1 437 == **6.3 Change the WiFi mode.** ==
438
439
440 [[image:image-20220531170131-4.png]]
441
Xiaoling 174.6 442
443
Xiaoye 131.1 444 == **6.4 Wait system to restart** ==
445
446
447 [[image:image-20220531170501-7.png]]
448
449
Xiaoling 174.6 450 (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
Xiaoye 131.1 451
452
Xiaoling 174.6 453
Xiaoye 131.1 454 == **6.5 Check the STA state** ==
455
456
457 [[image:image-20220531170705-8.png||height="484" width="990"]]
458
459
Xiaoling 174.6 460
Xiaoye 131.1 461 = **7. Trouble Shootings** =
462
463 == **7.1 How to get a wallet address?** ==
464
465
466 **//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
467
468
Xiaoling 174.6 469
Xiaoye 131.1 470 == **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
471
472
473 (((
474 //Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
475 )))
476
477 (((
478 //If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
479
Xiaoling 174.6 480
Xiaoye 131.1 481
482 )))
483
484 == **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
485
486
487 [[image:image-20220506182042-2.png||height="250" width="516"]]
488
489 [[image:1651832455372-647.png||height="224" width="520"]]
490
491
492 **//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
493
494 **//It might relate to the network which might be up to 10mins.//**
495
496
Xiaoling 174.6 497
Xiaoye 131.1 498 == **7.4 Onboarding – Bad Gateway** ==
499
500
501 [[image:1651832583790-633.png]]
502
503
504 //**This is caused by the process leading too long which just needs to refresh the page.**//
505
506
Xiaoling 174.6 507
Xiaoye 131.1 508 == **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
509
510
511 [[image:image-20220506182424-3.png]]
512
513
514 (((
515 //**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
516
Xiaoling 174.6 517
Xiaoye 131.1 518
519 )))
520
521 == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
522
Xiaoling 174.6 523
Xiaoye 131.1 524 [[image:1651832742262-209.png||height="297" width="365"]]
525
526
527 (((
Xiaoling 174.6 528 //**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
Xiaoye 131.1 529
Xiaoling 174.6 530
Xiaoye 131.1 531
532 )))
533
534 == **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
535
536
537 [[image:1651832811038-780.png||height="462" width="216"]]
538
539
540 (((
Xiaoling 174.6 541 //**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
Xiaoye 131.1 542
Xiaoling 174.6 543
Xiaoye 131.1 544
545 )))
546
Xiaoling 174.6 547 == **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
Xiaoye 131.1 548
549
550 (((
551 //**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
552
553
554 )))
555
556 (((
Xiaoling 174.6 557 //**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
Xiaoye 131.1 558 )))
559
560 [[image:1651832880009-473.png]]
561
562
563
Xiaoling 174.6 564 == **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
Xiaoye 131.1 565
Xiaoling 174.6 566
Xiaoye 131.1 567 **//This is caused by the server connection delay, which does not affect the regular use.//**
568
569 [[image:1651832959907-357.png]]
570
571
Xiaoling 174.6 572
Xiaoye 131.1 573 == **7.10 Mobile APP crash after scanning the QR Code?** ==
574
575
576 * //**Make sure you have input the correct Wallet address to generate QR Code.**//
577 * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
Xiaoling 174.6 578 * //**Make sure your mobile app's relevant permission is enabled.**//
Xiaoye 131.1 579 * //**Known: The Android 11 version may cause this kind of issue.**//
580
Xiaoling 174.18 581
582
583
Xiaoye 131.1 584 == **7.11 Why the frequency/region is not the same as what I purchased?** ==
585
586
587 (((
588 //**Each HP0D is inspected and configured prior to shipping.**//
589 )))
590
591 (((
592 //**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
593
Xiaoling 174.6 594
Xiaoye 131.1 595
596 )))
597
598 == **7.12 Can use the frequency to a region where is no support?** ==
599
600
601 (((
602 //**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
603 )))
604
605 (((
606 [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
607
Xiaoling 174.6 608
Xiaoye 131.1 609
610 )))
611
612 == **7.13 Can change the frequency of the HP0D Miner?** ==
613
614
615 //We do not recommend doing this, it may damage your device//
616
617
Xiaoling 174.6 618
Xiaoye 131.1 619 == **7.14 Low Reward and not transmit issue** ==
620
621
622 //We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
623
624 //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
625
626 [[image:image-20220527114519-1.png||height="579" width="851"]]
627
628
Xiaoling 174.6 629
Xiaoye 131.1 630 == **7.15 Why is my miner version not the latest** ==
631
632
633 //By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
634
635 //However, the download and upgrade may fail due to the network.//
636
Xiaoye 150.1 637 You can reboot your hotspot where the hotspot will try to upgrade when per booting.
Xiaoye 140.1 638
Xiaoye 131.1 639
Xiaoye 150.1 640 //and **We offer manual check methods:**//
Xiaoye 131.1 641
Xiaoye 150.1 642 **// Use the "draginoups" command to check//**
Xiaoye 140.1 643
644
Xiaoling 174.6 645 (% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
Xiaoye 141.1 646
Xiaoling 174.6 647
Xiaoye 131.1 648 [[image:image-20220601101358-1.png]]
649
650
651
Xiaoye 145.2 652 == **7.16 Why is my miner running down?** ==
653
Xiaoling 174.6 654
Xiaoye 145.2 655 //the default, the Miner is managed by docker.//
656
657 //If you find the miner is offline where the miner is running down.//
658
659
660 **What You can do?**
661
Xiaoling 174.6 662 (% style="color:blue" %)**1. Reboot the hotspot and check again.**
Xiaoye 145.2 663
Xiaoye 149.1 664 //Usually, if the miner is just down, then a reboot is the quickest way//
Xiaoye 145.2 665
666
Xiaoling 174.6 667 (% style="color:blue" %)**2. Reinstall the Miner manually.**
Xiaoye 145.2 668
Xiaoye 149.1 669 //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
Xiaoye 145.2 670
Xiaoling 174.18 671 (((
Xiaoye 149.1 672 **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
Xiaoling 174.18 673 )))
Xiaoye 149.1 674
675
Xiaoling 174.18 676 (((
Xiaoling 174.6 677 **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
Xiaoling 174.18 678 )))
Xiaoye 149.1 679
680
681
Xiaoye 145.2 682 [[image:image-20220610094825-2.png||height="457" width="835"]]
683
Xiaoling 174.6 684
Xiaoye 145.2 685 [[image:image-20220610094755-1.png||height="706" width="834"]]
686
687
Xiaoling 174.6 688
Edwin Chen 163.1 689 == **7.17 More commands for debugging.** ==
Xiaoye 145.2 690
691
Xiaoye 148.1 692 **I'm trapped somewhere, what can I do first?**
693
694
695 //dragino provides a method of self-testing//
696
697 //1.) Is Hotspot's Miner running?//
698
699 //2). Is the miner version up to date?//
700
701 //3). Is the height gap between local height and remote height kept within 100//
702
703
Xiaoling 174.19 704 (((
Xiaoling 174.6 705 (% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
Xiaoling 174.19 706 )))
Xiaoye 148.1 707
708
Xiaoye 147.1 709 (% class="box infomessage" %)
710 (((
Xiaoling 174.19 711 (((
Xiaoye 147.1 712 minerup update  #~-~-> reinstall miner but not clearing memory
713 minerup flush  #~-~->  reinstall miner and clear memory
714 minerup snap  #~-~->  load a snap_short to sync the block height
Xiaoye 148.1 715 minerup gap  #~-~->  check the height between local and remote.
716 draginoup  #~-~->  check the miner version gap between local and remote.
Xiaoling 174.19 717 )))
Xiaoye 155.1 718
Xiaoling 174.19 719 (((
720
721 )))
Xiaoye 155.1 722
Xiaoling 174.19 723 (((
Xiaoye 155.1 724 doker ps  #~-~-> show the miner running state
725 miner versions  #~-~-> show the miner  version
Xiaoye 147.1 726 )))
Xiaoling 174.19 727 )))
Xiaoye 147.1 728
729
Xiaoling 174.6 730
Xiaoye 161.1 731 == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
Xiaoye 147.1 732
Xiaoye 161.1 733
Xiaoling 174.20 734 (((
Xiaoye 161.1 735 //**This is the result of the OTA not being updated in time**//
Xiaoling 174.20 736 )))
Xiaoye 161.1 737
Xiaoling 174.20 738 (((
Xiaoye 161.1 739 //**You can reboot your hotspot or upgrade these packages manually.**//
Xiaoling 174.20 740 )))
Xiaoye 161.1 741
742
743 (% class="box infomessage" %)
744 (((
Xiaoling 174.20 745 (((
Xiaoye 161.1 746 **apt update**
747 **apt install dragino***
748 )))
Xiaoling 174.20 749 )))
Xiaoye 161.1 750
751
Xiaoling 174.6 752
Xiaoye 155.1 753 = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
Xiaoye 131.1 754
Xiaoling 174.6 755
Xiaoye 131.1 756 The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
757
758 So you have to re-flash the image into the SD card.
759
Xiaoling 174.6 760 (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
Xiaoye 131.1 761
Xiaoye 139.1 762
Xiaoling 174.6 763 (% style="color:blue" %)//**Preparations:**//
Xiaoye 131.1 764
765 1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
766
767 2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
768
769 3. //A card reader device//
770
771 4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
772
773 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
774
775
Xiaoling 174.6 776 (% style="color:blue" %)**HP0D's enclosure**
Xiaoye 158.1 777
778
779 [[image:image-20220615204902-1.png||height="633" width="918"]]
780
781
782 [[image:image-20220615204917-2.png||height="1038" width="922"]]
783
784
785
Xiaoling 174.6 786 === (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
Xiaoye 131.1 787
788
789 [[image:image-20220609111027-9.png]]
790
791
Xiaoling 174.7 792
Xiaoling 174.6 793 === (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
Xiaoye 131.1 794
795
796 [[image:image-20220609104907-8.png]]
797
798
Xiaoling 174.7 799
Xiaoling 174.6 800 === (% style="color:blue" %)**Step 3. Select the target **(%%) ===
Xiaoye 131.1 801
802
803 [[image:image-20220609104637-2.png]]
804
805 [[image:image-20220609104701-3.png]]
806
807
Xiaoling 174.7 808
Xiaoling 174.6 809 === (% style="color:blue" %)**Step 4. Flash start**(%%) ===
Xiaoye 131.1 810
811
812 [[image:image-20220609104727-4.png]]
813
814 [[image:image-20220609104741-5.png]]
815
816
Xiaoling 174.21 817
Xiaoling 174.6 818 === (% style="color:blue" %)**Flash Complete**(%%) ===
Xiaoye 131.1 819
820
821 [[image:image-20220609104415-1.png]]
822
823
824 == **Step 4. Re-install the SD card into the hotspot and boot it** ==
825
826
Xiaoling 174.6 827
Xiaoye 131.1 828 == **Step 5. Configure the correct region for the miner** ==
829
Xiaoling 174.6 830
Xiaoye 131.1 831 **by the default, the factory settings apply to the US915.**
832
833 **if your region is not the US915, you have to configure the correct region for the miner.**
834
835
836 **Access the hotspot CLI, and run these Linux commands**
837
838
Xiaoye 132.1 839 (% class="box infomessage" %)
840 (((
Xiaoling 174.21 841 (((
Xiaoye 131.1 842 ~#~##update the software of dragino
Xiaoling 174.21 843 )))
Xiaoye 131.1 844
Xiaoling 174.21 845 (((
Xiaoye 131.1 846 apt update
Xiaoling 174.21 847 )))
Xiaoye 131.1 848
Xiaoling 174.21 849 (((
Xiaoye 131.1 850 apt install dragino*
Xiaoye 132.1 851 )))
Xiaoling 174.21 852 )))
Xiaoye 131.1 853
854 [[image:image-20220609150452-2.png||height="348" width="909"]]
855
856
857
Xiaoye 132.1 858 (% class="box infomessage" %)
859 (((
Xiaoling 174.22 860 (((
Xiaoye 131.1 861 ~#~##configure the correct region for the miner and update it
Xiaoling 174.22 862 )))
Xiaoye 131.1 863
Xiaoling 174.22 864 (((
Xiaoye 138.1 865 uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
Xiaoling 174.22 866 )))
Xiaoye 131.1 867
Xiaoling 174.22 868 (((
Xiaoye 131.1 869 uci commit miner
Xiaoling 174.22 870 )))
Xiaoye 131.1 871
Xiaoling 174.22 872 (((
Xiaoye 131.1 873 minerup update
Xiaoye 132.1 874 )))
Xiaoling 174.22 875 )))
Xiaoye 131.1 876
Xiaoye 137.1 877 [[image:image-20220609151513-5.png]]
Xiaoye 131.1 878
879
Xiaoling 174.6 880
Xiaoye 132.1 881 (% class="box infomessage" %)
882 (((
Xiaoling 174.22 883 (((
Xiaoye 131.1 884 ~#~##check the miner version
Xiaoling 174.22 885 )))
Xiaoye 131.1 886
Xiaoling 174.22 887 (((
Xiaoye 131.1 888 draginoups
Xiaoye 132.1 889 )))
Xiaoling 174.22 890 )))
Xiaoye 131.1 891
Xiaoye 135.1 892 [[image:image-20220609151419-3.png]]
Xiaoye 131.1 893
Xiaoye 143.1 894
Xiaoling 174.6 895
Xiaoye 143.1 896 (% class="box infomessage" %)
897 (((
Xiaoling 174.22 898 (((
Xiaoye 143.1 899 ~#~##unblock the function of wireless
900 rfkill unblock wlan
901 uci set wireless.general.mode=ap
902 uci commit wireless
903 )))
Xiaoling 174.22 904 )))
Xiaoye 143.1 905
906 [[image:image-20220609161204-1.png]]
907
Xiaoye 131.1 908
Xiaoye 160.1 909
Xiaoye 174.1 910 = **9. How does the HP0D access to the network via a USB 4G Dongle** =
Xiaoye 160.1 911
Xiaoling 174.6 912
Xiaoye 172.1 913 We have reserved enough space inside the HP0D to use a USB 4G Dongle,
914
915 so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
916
917
Xiaoling 174.6 918 (% style="color:green" %)//**Preparations:**//
Xiaoye 172.1 919
920 //**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
921
922 //**2). A Sim card that can access the 4g network.**//
923
924 //**3). open the hotspot's shell.**//
925
926
Xiaoling 174.6 927
Xiaoye 172.1 928 == **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
929
Xiaoling 174.6 930
Xiaoye 172.1 931 [[image:image-20220627153334-2.png]]
932
933
Xiaoling 174.6 934
Xiaoye 172.1 935 == **9.2. Checking the USB 4G Dongle network** ==
936
Xiaoling 174.6 937
Xiaoling 174.22 938 (((
Xiaoye 172.1 939 We have installed drivers for common USB 4G Dongle,
Xiaoling 174.22 940 )))
Xiaoye 172.1 941
Xiaoling 174.22 942 (((
Xiaoye 172.1 943 and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
Xiaoling 174.22 944 )))
Xiaoye 172.1 945
946
Xiaoling 174.23 947 (% style="color:blue" %)**//HUAWEI-E3327//**
Xiaoye 172.1 948
949 [[image:image-20220627154526-9.png||height="762" width="725"]]
950
951
952
Xiaoling 174.23 953 (% style="color:blue" %)**//ZTE//**
Xiaoling 174.6 954
Xiaoye 172.1 955 [[image:image-20220627154201-5.png]]
956
957
958
959 = **10. PoE introduction** =
960
961
Xiaoling 174.23 962 (((
Xiaoling 174.6 963 //The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
Xiaoling 174.23 964 )))
Xiaoye 160.1 965
Xiaoling 174.23 966 (((
Xiaoye 161.1 967 //So you can use the PoE //switches// or PoE injector to power the device.//
Xiaoling 174.23 968 )))
Xiaoye 160.1 969
970
Xiaoling 174.6 971 (((
972 (% style="color:red" %)**Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
973 )))
Xiaoye 160.1 974
975
Xiaoling 174.6 976 (% style="background-color:yellow" %)**Wiring schematic:**
Xiaoye 160.1 977
978 [[image:image-20220616143347-1.png]]
979
980
981
982
Xiaoye 173.1 983 = **11. OTA Version Info** =
Xiaoye 160.1 984
Xiaoling 174.6 985
Xiaoye 131.1 986 == **When does the OTA update happen?** ==
987
988
989 **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
990
Xiaoling 174.6 991
992
Xiaoye 131.1 993 == **# 2022/05/14** ==
994
995
996 1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
997 1. //Add postinst after auto-update//
998 1. //Add Miner version mark.//
999 1. //Add fast sync if miner GAP is large//
1000
Kilight Cao 152.1 1001 == **# 2022/05/18** ==
1002
1003
1004 1. //Update minerup to speed up synchronized blocks//
1005
Xiaoye 131.1 1006 == **# 2022/05/24** ==
1007
Kilight Cao 151.1 1008
Kilight Cao 152.1 1009 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
Xiaoye 131.1 1010
Kilight Cao 151.1 1011 == **# 2022/05/31** ==
Xiaoye 131.1 1012
Xiaoling 174.6 1013
Kilight Cao 152.1 1014 1. //Add WiFi STA icon display//
1015 1. //Optimize AP icon display//
1016 1. //Optimize home icon display//
1017 1. //Fix for Miner icon URL bug//
1018 1. //Add the secondary server configuration//
Kilight Cao 151.1 1019
Xiaoye 173.1 1020 = **12. Supports** =
Xiaoye 131.1 1021
Xiaoling 174.6 1022
Xiaoye 131.1 1023 (((
1024 **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1025 )))
1026
1027 (((
1028 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
1029
Xiaoling 174.6 1030
Xiaoye 131.1 1031
1032 )))
1033
Xiaoye 173.1 1034 = **13. Order Info** =
Xiaoye 131.1 1035
1036
Xiaoling 174.6 1037 (% style="color:blue" %)**HP0D-XXX**
Xiaoye 131.1 1038
Xiaoling 174.6 1039 (% style="color:blue" %)**XXX**(%%): Frequency Band
Xiaoye 131.1 1040
Xiaoling 174.6 1041 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1042 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1043 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1044 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1045 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1046 * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1047
Xiaoye 173.1 1048 = **14. Manufacturer Info** =
Xiaoye 131.1 1049
Xiaoling 174.6 1050
Xiaoye 131.1 1051 (((
1052 **Shenzhen Dragino Technology Development co. LTD**
1053 )))
1054
1055 (((
1056 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
1057 )))
1058
1059 (((
1060 Longcheng Street, LongGang District; Shenzhen 518116, China
1061
1062
1063
1064 )))
1065
Xiaoye 173.1 1066 = **15. FCC Warning** =
Xiaoye 131.1 1067
Xiaoling 174.6 1068
Xiaoye 131.1 1069 (((
1070 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1071 )))
1072
1073 (((
1074 ~-~- Reorient or relocate the receiving antenna.
1075 )))
1076
1077 (((
1078 ~-~- Increase the separation between the equipment and receiver.
1079 )))
1080
1081 (((
1082 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1083 )))
1084
1085 (((
1086 ~-~- Consult the dealer or an experienced radio/TV technician for help.
1087 )))
1088
1089 (((
1090 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1091 )))
1092
1093 (((
1094 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1095 )))