Skip to Content
Version 174.22 by Xiaoling on 2022/07/27 17:43
Show last authors
1 (% style="text-align:center" %)
2 [[image:1651802206983-860.png||height="427" width="398"]]
3
4
5 (((
6
7
8
9 )))
10
11 **Table of Contents：**
12
13 {{toc/}}
14
15
16 = **1. Introduction** =
17
18 == **1.1 What is HP0D** ==
19
20
21 (((
22 The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 )))
28
29 (((
30 (% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 )))
32
33 (((
34 HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35
36
37 )))
38
39 == **1.2 Specifications** ==
40
41 **~ Hardware System:**
42 Linux Part:
43
44 * Raspberry Pi 4
45
46 **~ Interface:**
47
48 * 10M/100M RJ45 Ports x 1
49 * LoRaWAN Wireless
50 * Power Input: 12V 2A, DC
51
52 **~ Operating Condition:**
53
54 * Work Temperature: -20 ~~ 65°C
55 * Storage Temperature: -20 ~~ 65°C
56 * Power Input: 12V 2A, DC
57
58
59 == **1.3 Features** ==
60
61 * Open-Source Linux system
62 * RPi4 with 2G /4G or 8G RAM
63 * Managed by Web GUI, SSH via Internet
64 * Support Semtech UDP packet forwarder
65 * Support LoRaWAN Station Connection
66 * Support Helium Miner
67 * External fiberglass antenna
68 * Firmware OTA
69 * 802.3af PoE
70 * Lighting Protection
71 * Remote Monitoring
72 * Support Helium LoRaWAN server and secondary LoRaWAN server
73 * Include prepaid $40 onboarding cost and $10 location cost.
74 * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
75
76
77 == **1.4 Label info and login name** ==
78
79
80 [[image:1651803959860-394.png||height="500" width="375"]]
81
82
83
84 === 1.4.1 Label information: ===
85
86
87 (((
88 **Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
89 **Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
90 **Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
91 **Miner address**:  (% class="mark" %)12xxxxxx(%%)
92 **Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
93 **Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
94 **SN**:  (% class="mark" %)device serial number.
95 )))
96
97
98
99 = **2. Quick Start & Onboarding** =
100
101
102 (((
103 The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
104 )))
105
106
107 == **2.1  Connect HP0D Web UI** ==
108
109
110 === **2.1.1 via HP0D's Access Point** ===
111
112
113 At the first boot of HP0D, it will auto-generate a Wi-Fi network
114
115
116 [[image:1651804327535-321.png||height="325" width="199"]]
117
118
119 (% class="box infomessage" %)
120 (((
121 called  : **//HPD-dragino-xxxxxx//**
122 )))
123
124 (% class="box infomessage" %)
125 (((
126 with password:  **//dragino+dragino//**
127 You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
128 )))
129
130
131 [[image:1651804397792-591.png||height="386" width="733"]]
132
133
134
135 === **2.1.2 Connect via HP0D hostname** ===
136
137
138 (((
139 Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
140 )))
141
142 Like: (% style="background-color:yellow" %)__**//http:~/~/dragino-4ba54a//**__
143
144
145 [[image:1651804629009-699.png]]
146
147
148
149 === **2.1.3 Connect via Ethernet Port** ===
150
151
152 (((
153 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
154 )))
155
156
157 (((
158 //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
159 )))
160
161
162 [[image:1651804782523-623.png]]
163
164
165
166 == **2.2 Generate QR Code** ==
167
168
169 (((
170 //Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
171 )))
172
173 (((
174 (% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
175
176
177 )))
178
179 [[image:image-20220506140312-1.png||height="435" width="438"]]
180
181
182
183 == **2.3 Onboarding Hotspot** ==
184
185
186 (((
187 //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
188 )))
189
190 (((
191 (% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
192
193
194 )))
195
196 (((
197 //**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
198
199
200 )))
201
202 [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
203
204
205
206 //**3. **Scan the QR Code you generated in the previous step.//
207
208 [[image:1651828211026-220.png||height="405" width="191"]]
209
210
211
212 (((
213 //**4. **Onboarding your device//
214 )))
215
216 (((
217 Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
218
219
220 )))
221
222 [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
223
224 [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
225
226
227 **5. **//Check onboarding status where you can check from mobile~://
228
229 [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
230
231
232 //You can also see the hotspot status in the below link~://
233
234 //https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
235
236 //Example~://
237
238
239 **//Green Synced means hotspot works normally.//**
240
241 [[image:1651828427715-679.png||height="374" width="635"]]
242
243
244
245 == **2.4 Set the Port Forwarding** ==
246
247
248 (((
249 //Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
250 )))
251
252 [[image:1651828514449-658.png]]
253
254 (((
255
256 )))
257
258 (((
259 (((
260 (% style="color:red" %)**Note: Please refer to more detailed Settings**
261 )))
262 )))
263
264 (((
265 (((
266 [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
267 )))
268 )))
269
270 (((
271 (((
272 [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
273 )))
274
275
276
277 )))
278
279 = **3. Check the configuration of HP0D** =
280
281 == **3.1 LoRa frequency configuration** ==
282
283
284 [[image:1651828687205-178.png||height="323" width="657"]]
285
286
287
288 == **3.2 Check the LoRaWAN Server Address** ==
289
290
291 [[image:image-20220607160428-1.png||height="472" width="654"]]
292
293
294
295 == **3.2.1 Configure the Secondary LoRaWAN Server** ==
296
297
298 [[image:image-20220607161130-2.png||height="501" width="1112"]]
299
300
301 [[image:image-20220607161603-3.png||height="557" width="1113"]]
302
303
304 [[image:image-20220607161812-4.png||height="699" width="1115"]]
305
306
307
308 == **3.3 Check Miner configuration** ==
309
310
311 [[image:image-20220506181408-1.png||height="451" width="513"]]
312
313
314 (((
315 (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
316
317
318
319 == **//3.4 Check the Miner state//** ==
320
321
322 [[image:image-20220531171836-9.png||height="776" width="1155"]]
323
324
325 (((
326 (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
327 )))
328
329
330
331 )))
332
333 = **4. Installation of Antenna** =
334
335
336 (((
337 //HP0D uses Fiber Glass Antenna.//
338 )))
339
340 [[image:1651832158606-882.png]]
341
342 (((
343
344 )))
345
346 (((
347 //The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
348 )))
349
350 (((
351 [[image:1651832205608-998.png||height="349" width="198"]]
352
353
354
355 )))
356
357 = **5. SSH Access for Linux console** =
358
359
360 (((
361 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
362 )))
363
364 (((
365 //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
366 )))
367
368 (((
369 //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
370 )))
371
372 (((
373 //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
374 )))
375
376
377 Below are screenshots:
378
379 [[image:image-20220608202027-1.png]]
380
381 (((
382 **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
383 )))
384
385 (((
386 //Port:  22//
387 )))
388
389 (((
390 //User Name:      (% style="color:green" %)**root**//
391 )))
392
393 (((
394 //Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
395
396
397 )))
398
399 (((
400 //After logging in, you will be in the Linux console and can enter commands as shown below.//
401
402
403 )))
404
405 [[image:image-20220608202118-2.png]]
406
407
408
409 = **6. How to change the Wireless function of HP0D** =
410
411
412 //The wireless function is configured as AP by default and the web page does not support configuration,//
413
414 //if you want to configure it as STA(client)connection mode,//
415
416 //you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
417
418
419 (% style="color:red" %)**//Note: the wireless state is as AP//**
420
421 [[image:image-20220531170243-5.png||height="469" width="967"]]
422
423
424
425 == **6.1 Access WiFi configuration page** ==
426
427
428 [[image:image-20220531165803-2.png]]
429
430
431
432 == **6.2 Enter your WiFi information and save** ==
433
434
435 [[image:image-20220531165958-3.png]]
436
437
438
439 == **6.3 Change the WiFi mode.** ==
440
441
442 [[image:image-20220531170131-4.png]]
443
444
445
446 == **6.4 Wait system to restart** ==
447
448
449 [[image:image-20220531170501-7.png]]
450
451
452 (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
453
454
455
456 == **6.5 Check the STA state** ==
457
458
459 [[image:image-20220531170705-8.png||height="484" width="990"]]
460
461
462
463 = **7. Trouble Shootings** =
464
465 == **7.1 How to get a wallet address?** ==
466
467
468 **//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
469
470
471
472 == **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
473
474
475 (((
476 //Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
477 )))
478
479 (((
480 //If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
481
482
483
484 )))
485
486 == **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
487
488
489 [[image:image-20220506182042-2.png||height="250" width="516"]]
490
491 [[image:1651832455372-647.png||height="224" width="520"]]
492
493
494 **//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
495
496 **//It might relate to the network which might be up to 10mins.//**
497
498
499
500 == **7.4 Onboarding – Bad Gateway** ==
501
502
503 [[image:1651832583790-633.png]]
504
505
506 //**This is caused by the process leading too long which just needs to refresh the page.**//
507
508
509
510 == **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
511
512
513 [[image:image-20220506182424-3.png]]
514
515
516 (((
517 //**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
518
519
520
521 )))
522
523 == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
524
525
526 [[image:1651832742262-209.png||height="297" width="365"]]
527
528
529 (((
530 //**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
531
532
533
534 )))
535
536 == **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
537
538
539 [[image:1651832811038-780.png||height="462" width="216"]]
540
541
542 (((
543 //**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
544
545
546
547 )))
548
549 == **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
550
551
552 (((
553 //**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
554
555
556 )))
557
558 (((
559 //**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
560 )))
561
562 [[image:1651832880009-473.png]]
563
564
565
566 == **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
567
568
569 **//This is caused by the server connection delay, which does not affect the regular use.//**
570
571 [[image:1651832959907-357.png]]
572
573
574
575 == **7.10 Mobile APP crash after scanning the QR Code?** ==
576
577
578 * //**Make sure you have input the correct Wallet address to generate QR Code.**//
579 * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
580 * //**Make sure your mobile app's relevant permission is enabled.**//
581 * //**Known: The Android 11 version may cause this kind of issue.**//
582
583
584
585
586
587 == **7.11 Why the frequency/region is not the same as what I purchased?** ==
588
589
590 (((
591 //**Each HP0D is inspected and configured prior to shipping.**//
592 )))
593
594 (((
595 //**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
596
597
598
599 )))
600
601 == **7.12 Can use the frequency to a region where is no support?** ==
602
603
604 (((
605 //**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
606 )))
607
608 (((
609 [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
610
611
612
613 )))
614
615 == **7.13 Can change the frequency of the HP0D Miner?** ==
616
617
618 //We do not recommend doing this, it may damage your device//
619
620
621
622 == **7.14 Low Reward and not transmit issue** ==
623
624
625 //We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
626
627 //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
628
629 [[image:image-20220527114519-1.png||height="579" width="851"]]
630
631
632
633 == **7.15 Why is my miner version not the latest** ==
634
635
636 //By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
637
638 //However, the download and upgrade may fail due to the network.//
639
640 You can reboot your hotspot where the hotspot will try to upgrade when per booting.
641
642
643 //and **We offer manual check methods:**//
644
645 **// Use the "draginoups" command to check//**
646
647
648 (% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
649
650
651 [[image:image-20220601101358-1.png]]
652
653
654
655 == **7.16 Why is my miner running down?** ==
656
657
658 //the default, the Miner is managed by docker.//
659
660 //If you find the miner is offline where the miner is running down.//
661
662
663 **What You can do?**
664
665 (% style="color:blue" %)**1. Reboot the hotspot and check again.**
666
667 //Usually, if the miner is just down, then a reboot is the quickest way//
668
669
670 (% style="color:blue" %)**2. Reinstall the Miner manually.**
671
672 //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
673
674 (((
675 **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
676 )))
677
678
679 (((
680 **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
681 )))
682
683
684
685 [[image:image-20220610094825-2.png||height="457" width="835"]]
686
687
688 [[image:image-20220610094755-1.png||height="706" width="834"]]
689
690
691
692 == **7.17 More commands for debugging.** ==
693
694
695 **I'm trapped somewhere, what can I do first?**
696
697
698 //dragino provides a method of self-testing//
699
700 //1.) Is Hotspot's Miner running?//
701
702 //2). Is the miner version up to date?//
703
704 //3). Is the height gap between local height and remote height kept within 100//
705
706
707 (((
708 (% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
709 )))
710
711
712 (% class="box infomessage" %)
713 (((
714 (((
715 minerup update  #~-~-> reinstall miner but not clearing memory
716 minerup flush  #~-~->  reinstall miner and clear memory
717 minerup snap  #~-~->  load a snap_short to sync the block height
718 minerup gap  #~-~->  check the height between local and remote.
719 draginoup  #~-~->  check the miner version gap between local and remote.
720 )))
721
722 (((
723
724 )))
725
726 (((
727 doker ps  #~-~-> show the miner running state
728 miner versions  #~-~-> show the miner  version
729 )))
730 )))
731
732
733
734 == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
735
736
737 (((
738 //**This is the result of the OTA not being updated in time**//
739 )))
740
741 (((
742 //**You can reboot your hotspot or upgrade these packages manually.**//
743 )))
744
745
746 (% class="box infomessage" %)
747 (((
748 (((
749 **apt update**
750 **apt install dragino***
751 )))
752 )))
753
754
755
756 = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
757
758
759 The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
760
761 So you have to re-flash the image into the SD card.
762
763 (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
764
765
766 (% style="color:blue" %)//**Preparations:**//
767
768 1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
769
770 2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
771
772 3. //A card reader device//
773
774 4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
775
776 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
777
778
779 (% style="color:blue" %)**HP0D's enclosure**
780
781
782 [[image:image-20220615204902-1.png||height="633" width="918"]]
783
784
785 [[image:image-20220615204917-2.png||height="1038" width="922"]]
786
787
788
789 === (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
790
791
792 [[image:image-20220609111027-9.png]]
793
794
795
796 === (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
797
798
799 [[image:image-20220609104907-8.png]]
800
801
802
803 === (% style="color:blue" %)**Step 3. Select the target **(%%) ===
804
805
806 [[image:image-20220609104637-2.png]]
807
808 [[image:image-20220609104701-3.png]]
809
810
811
812 === (% style="color:blue" %)**Step 4. Flash start**(%%) ===
813
814
815 [[image:image-20220609104727-4.png]]
816
817 [[image:image-20220609104741-5.png]]
818
819
820
821 === (% style="color:blue" %)**Flash Complete**(%%) ===
822
823
824 [[image:image-20220609104415-1.png]]
825
826
827 == **Step 4. Re-install the SD card into the hotspot and boot it** ==
828
829
830
831 == **Step 5. Configure the correct region for the miner** ==
832
833
834 **by the default, the factory settings apply to the US915.**
835
836 **if your region is not the US915, you have to configure the correct region for the miner.**
837
838
839 **Access the hotspot CLI, and run these Linux commands**
840
841
842 (% class="box infomessage" %)
843 (((
844 (((
845 ~#~##update the software of dragino
846 )))
847
848 (((
849 apt update
850 )))
851
852 (((
853 apt install dragino*
854 )))
855 )))
856
857 [[image:image-20220609150452-2.png||height="348" width="909"]]
858
859
860
861 (% class="box infomessage" %)
862 (((
863 (((
864 ~#~##configure the correct region for the miner and update it
865 )))
866
867 (((
868 uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
869 )))
870
871 (((
872 uci commit miner
873 )))
874
875 (((
876 minerup update
877 )))
878 )))
879
880 [[image:image-20220609151513-5.png]]
881
882
883
884 (% class="box infomessage" %)
885 (((
886 (((
887 ~#~##check the miner version
888 )))
889
890 (((
891 draginoups
892 )))
893 )))
894
895 [[image:image-20220609151419-3.png]]
896
897
898
899 (% class="box infomessage" %)
900 (((
901 (((
902 ~#~##unblock the function of wireless
903 rfkill unblock wlan
904 uci set wireless.general.mode=ap
905 uci commit wireless
906 )))
907 )))
908
909 [[image:image-20220609161204-1.png]]
910
911
912
913 = **9. How does the HP0D access to the network via a USB 4G Dongle** =
914
915
916 We have reserved enough space inside the HP0D to use a USB 4G Dongle,
917
918 so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
919
920
921 (% style="color:green" %)//**Preparations:**//
922
923 //**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
924
925 //**2). A Sim card that can access the 4g network.**//
926
927 //**3). open the hotspot's shell.**//
928
929
930
931 == **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
932
933
934 [[image:image-20220627153334-2.png]]
935
936
937
938 == **9.2. Checking the USB 4G Dongle network** ==
939
940
941 (((
942 We have installed drivers for common USB 4G Dongle,
943 )))
944
945 (((
946 and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
947 )))
948
949
950 **//HUAWEI-E3327//**
951
952 [[image:image-20220627154526-9.png||height="762" width="725"]]
953
954
955
956 **//ZTE//**
957
958 [[image:image-20220627154201-5.png]]
959
960
961
962 = **10. PoE introduction** =
963
964
965 //The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
966
967 //So you can use the PoE //switches// or PoE injector to power the device.//
968
969
970 (((
971 (% style="color:red" %)**Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
972 )))
973
974
975 (% style="background-color:yellow" %)**Wiring schematic:**
976
977 [[image:image-20220616143347-1.png]]
978
979
980
981
982 = **11. OTA Version Info** =
983
984
985 == **When does the OTA update happen?** ==
986
987
988 **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
989
990
991
992 == **# 2022/05/14** ==
993
994
995 1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
996 1. //Add postinst after auto-update//
997 1. //Add Miner version mark.//
998 1. //Add fast sync if miner GAP is large//
999
1000 == **# 2022/05/18** ==
1001
1002
1003 1. //Update minerup to speed up synchronized blocks//
1004
1005 == **# 2022/05/24** ==
1006
1007
1008 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
1009
1010 == **# 2022/05/31** ==
1011
1012
1013 1. //Add WiFi STA icon display//
1014 1. //Optimize AP icon display//
1015 1. //Optimize home icon display//
1016 1. //Fix for Miner icon URL bug//
1017 1. //Add the secondary server configuration//
1018
1019 = **12. Supports** =
1020
1021
1022 (((
1023 **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1024 )))
1025
1026 (((
1027 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
1028
1029
1030
1031 )))
1032
1033 = **13. Order Info** =
1034
1035
1036 (% style="color:blue" %)**HP0D-XXX**
1037
1038 (% style="color:blue" %)**XXX**(%%): Frequency Band
1039
1040 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1041 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1042 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1043 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1044 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1045 * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1046
1047 = **14. Manufacturer Info** =
1048
1049
1050 (((
1051 **Shenzhen Dragino Technology Development co. LTD**
1052 )))
1053
1054 (((
1055 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
1056 )))
1057
1058 (((
1059 Longcheng Street, LongGang District; Shenzhen 518116, China
1060
1061
1062
1063 )))
1064
1065 = **15. FCC Warning** =
1066
1067
1068 (((
1069 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1070 )))
1071
1072 (((
1073 ~-~- Reorient or relocate the receiving antenna.
1074 )))
1075
1076 (((
1077 ~-~- Increase the separation between the equipment and receiver.
1078 )))
1079
1080 (((
1081 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1082 )))
1083
1084 (((
1085 ~-~- Consult the dealer or an experienced radio/TV technician for help.
1086 )))
1087
1088 (((
1089 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1090 )))
1091
1092 (((
1093 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1094 )))