Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 78.1
edited by Xiaoye
on 2022/05/24 14:34
Change comment: There is no comment for this version
To version 60.1
edited by Xiaoling
on 2022/05/06 18:24
Change comment: Uploaded new attachment "image-20220506182424-3.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D Full Hotspot for Helium
1 +HP0D
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,58 +1,196 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1651802206983-860.png||height="427" width="398"]]
4 +[[image:1651802206983-860.png||height="645" width="602"]]
3 3  
4 4  
5 5  (((
6 6  **HP0D Full Hotspot for Helium User Manual**
9 +)))
7 7  
11 +
12 +
13 +
14 +
15 +{{toc/}}
16 +
17 +
18 +==== 1. Introduction ====
19 +
20 +===== 1.1 What is HP0D =====
21 +
22 +(((
23 +(((
24 +(((
25 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
26 +)))
27 +)))
28 +
29 +(((
30 +(((
31 + Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
32 +)))
33 +)))
34 +
35 +(((
36 +(((
37 + at low data rates.
38 +)))
39 +)))
40 +)))
41 +
42 +(((
43 +(((
44 +(((
8 8  
9 9  )))
47 +)))
48 +)))
10 10  
11 -**Table of Contents：**
50 +(((
51 +(((
52 +(((
53 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
54 +)))
55 +)))
12 12  
13 -{{toc/}}
57 +(((
58 +(((
59 + ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
60 +)))
61 +)))
14 14  
63 +(((
64 +(((
65 + packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
66 +)))
67 +)))
15 15  
16 -= **1. Introduction** =
69 +(((
70 +(((
71 + HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
72 +)))
73 +)))
74 +)))
17 17  
18 -== **1.1 What is HP0D** ==
76 +(((
77 +(((
78 +(((
79 +**~ and connects max 2 x LoRaWAN servers at the same time**.
80 +)))
81 +)))
82 +)))
19 19  
20 20  (((
21 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
85 +(((
86 +(((
87 +
22 22  )))
89 +)))
90 +)))
23 23  
24 24  (((
25 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
93 +(((
94 +(((
95 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
26 26  )))
97 +)))
27 27  
28 28  (((
29 -(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
100 +(((
101 + for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
30 30  )))
103 +)))
104 +)))
31 31  
32 32  (((
33 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
107 +(((
108 +(((
109 +
34 34  )))
111 +)))
112 +)))
35 35  
36 -== **1.2 Specifications** ==
114 +(((
115 +(((
116 +(((
117 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
118 +)))
119 +)))
37 37  
121 +(((
122 +(((
123 + customize the frequency bands to use in their own LoRaWAN network.
124 +)))
125 +)))
126 +)))
127 +
128 +
129 +===== 1.2 Specifications =====
130 +
131 +(((
132 +(((
38 38  **~ Hardware System:**
134 +)))
135 +)))
136 +
137 +(((
138 +(((
39 39   Linux Part:
140 +)))
141 +)))
40 40  
41 -* Raspberry Pi 4
143 +* (((
144 +(((
145 +Raspberry Pi 4
146 +)))
147 +)))
42 42  
149 +(((
150 +(((
43 43  **~ Interface:**
152 +)))
153 +)))
44 44  
45 -* 10M/100M RJ45 Ports x 1
46 -* LoRaWAN Wireless
47 -* Power Input: 12V 2A, DC
155 +* (((
156 +(((
157 +10M/100M RJ45 Ports x 1
158 +)))
159 +)))
160 +* (((
161 +(((
162 +LoRaWAN Wireless
163 +)))
164 +)))
165 +* (((
166 +(((
167 +Power Input: 12V 2A, DC
168 +)))
169 +)))
48 48  
171 +(((
172 +(((
49 49  **~ Operating Condition:**
174 +)))
175 +)))
50 50  
51 -* Work Temperature: -20 ~~ 65°C
52 -* Storage Temperature: -20 ~~ 65°C
53 -* Power Input: 12V 2A, DC
177 +* (((
178 +(((
179 +Work Temperature: -20 ~~ 65°C
180 +)))
181 +)))
182 +* (((
183 +(((
184 +Storage Temperature: -20 ~~ 65°C
185 +)))
186 +)))
187 +* (((
188 +(((
189 +Power Input: 12V 2A, DC
190 +)))
191 +)))
54 54  
55 -== **1.3 Features** ==
193 +===== 1.3 Features =====
56 56  
57 57  * Open-Source Linux system
58 58  * RPi4 with 2G /4G or 8G RAM
... ... @@ -69,156 +69,287 @@
69 69  * Include prepaid $40 onboarding cost and $10 location cost.
70 70  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
71 71  
72 -== **1.4 Label info and login name** ==
210 +===== 1.4 Label info and login name =====
73 73  
74 74  
213 +(% style="text-align:center" %)
75 75  [[image:1651803959860-394.png||height="500" width="375"]]
76 76  
77 -===
78 -**1.4.1 Label information:** ===
79 79  
80 80  
81 -**Device hostname:**  (% class="mark" %)dragino-xxxxxx
82 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
83 -**Miner animal name**: xxx-xxx-xxx
84 -**Miner address**:  12xxxxxx
85 -**Eth MAC address**:  A8: 40: 41: EF: FE: CD
86 -**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
87 -**SN**:  device serial number.
218 +(((
219 +(((
220 +**~ Label information:**
221 +)))
222 +)))
88 88  
224 +(((
225 +(((
226 +
227 +)))
228 +)))
89 89  
90 -= **2. Quick Start & Onboarding** =
230 +(((
231 +(((
232 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
233 +)))
234 +)))
91 91  
92 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
236 +(((
237 +(((
238 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
239 +)))
240 +)))
93 93  
242 +(((
243 +(((
244 +**~ Miner animal name**: xxx-xxx-xxx
245 +)))
246 +)))
94 94  
95 -== **2.1  Connect HP0D Web UI** ==
248 +(((
249 +(((
250 +**~ Miner address**:          112xxxxxx
251 +)))
252 +)))
96 96  
97 -=== **2.1.1 via HP0D’s Access Point** ===
254 +(((
255 +(((
256 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
257 +)))
258 +)))
98 98  
99 -At the first boot of HP0D, it will auto-generate a Wi-Fi network
260 +(((
261 +(((
262 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
263 +)))
264 +)))
100 100  
266 +(((
267 +(((
268 +**~ SN**:  device serial number.
269 +)))
270 +)))
101 101  
102 -[[image:1651804327535-321.png||height="325" width="199"]]
103 103  
273 +==== 2. Quick Start & Onboarding ====
104 104  
105 -(% class="box infomessage" %)
106 106  (((
107 - called  : **//HPD-dragino-xxxxxx//**
276 +(((
277 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after
108 108  )))
109 109  
110 -(% class="box infomessage" %)
111 111  (((
112 - with password:  **//dragino+dragino//**
113 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
281 + connecting to its Wi-Fi network, or via its WAN Ethernet port.
114 114  )))
283 +)))
115 115  
285 +(% class="wikigeneratedid" id="H-2" %)
286 +(((
287 +
288 +)))
116 116  
117 -[[image:1651804397792-591.png||height="386" width="733"]]
290 +===== 2.1  Connect HP0D Web UI =====
118 118  
292 +====== 2.1.1 via HP0D’s Access Point. ======
119 119  
120 -=== **2.1.2 Connect via HP0D hostname** ===
294 +(((
295 +(((
296 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
297 +)))
298 +)))
121 121  
122 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
300 +(((
301 +(((
302 +
303 +)))
304 +)))
123 123  
124 - Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
306 +(((
307 +(((
308 + called           : **//HPD-dragino-xxxxxx//**
309 +)))
310 +)))
125 125  
312 +(((
313 +(((
314 + with password:  **//dragino+dragino//**
315 +)))
316 +)))
126 126  
127 -[[image:1651804629009-699.png]]
318 +(((
319 +(((
320 +
321 +)))
322 +)))
128 128  
129 -=== **2.1.3 Connect via Ethernet Port** ===
324 +(((
325 +(((
326 +
327 +)))
328 +)))
130 130  
131 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
330 +(((
331 +(((
332 + You can use a PC to connect to this Wi-Fi network. The PC will
333 +)))
334 +)))
132 132  
336 +(((
337 +(((
338 + get an IP address 10.130.1.xxx and the HP0D has the default
339 +)))
340 +)))
133 133  
134 -//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
342 +(((
343 +(((
344 + IP 10.130.1.1
345 +)))
346 +)))
135 135  
136 136  
137 -[[image:1651804782523-623.png]]
138 138  
350 +(% style="text-align:center" %)
351 +[[image:1651804397792-591.png||height="402" width="763"]]
139 139  
140 -== **2.2 Generate QR Code** ==
141 141  
142 142  
355 +====== 2.1.2 Connect via HP0D hostname ======
356 +
143 143  (((
144 -//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
358 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
145 145  )))
146 146  
147 147  (((
148 -//Note: After onboarding, this wallet will become the owner of this hotspot.//
362 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
363 +)))
149 149  
150 -
365 +(((
366 + Web-UI via HP0D’s hostname.
151 151  )))
152 152  
153 -[[image:image-20220506140312-1.png||height="435" width="438"]]
154 154  
370 + Like: __**//http:~/~/dragino-4ba54a//**__
155 155  
156 -== **2.3 Onboarding Hotspot** ==
157 157  
373 +(% style="text-align:center" %)
374 +[[image:1651804629009-699.png]]
158 158  
376 +
377 +====== 2.1.3 Connect via Ethernet Port ======
378 +
159 159  (((
160 -//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
380 +(((
381 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
161 161  )))
383 +)))
162 162  
163 163  (((
164 -**//Note: the APP version needs to be greater than 3.11.//**
386 +(((
387 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
388 +)))
389 +)))
165 165  
391 +(((
166 166  
167 167  )))
168 168  
395 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
396 +
397 + or SSH access of HP0D.
398 +
399 +(% style="text-align:center" %)
400 +[[image:1651804782523-623.png]]
401 +
402 +
403 +
404 +===== 2.2 Generate QR Code =====
405 +
169 169  (((
170 -//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
407 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
408 +)))
171 171  
172 -
410 +(((
411 + Note: After onboarding, this wallet will become owner of this hotspot.
173 173  )))
174 174  
175 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
414 +(% style="text-align:center" %)
415 +[[image:image-20220506140312-1.png||height="435" width="438"]]
176 176  
177 177  
178 -//**3. **Scan the QR Code you generated in the previous step.//
418 +===== 2.3 Onboarding Hotspot =====
179 179  
180 -[[image:1651828211026-220.png||height="405" width="191"]]
420 +(((
421 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
422 +)))
181 181  
424 +(((
425 + Note: the APP version need to be greater than 3.11.
426 +)))
182 182  
183 183  (((
184 -//**4. **Onboarding your device//
429 +
185 185  )))
186 186  
187 187  (((
188 -Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
433 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
434 +)))
189 189  
190 -
436 +(((
437 + the ‘DRAGINO Miner HP0D’
191 191  )))
192 192  
193 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
440 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
194 194  
195 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
442 + 3. Scan the QR Code you generated in the previous step.
196 196  
444 +(% style="text-align:center" %)
445 +[[image:1651828211026-220.png||height="405" width="191"]]
197 197  
198 -**5. **//Check onboarding status where you can check from mobile~://
447 + 4. Onboarding your device
199 199  
200 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
449 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
201 201  
451 + mobile to onboarding server might have issue.
202 202  
203 -//You can also see the hotspot status in the below link~://
453 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
204 204  
205 -//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
455 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
206 206  
207 -//Example~://
208 208  
458 +5. Check onboarding status
209 209  
210 -**//Green Synced means hotspot works normally.//**
460 + You can check from mobile:
211 211  
462 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
463 +
464 + You can also see the hotspot status in below link:
465 +
466 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
467 +
468 + Example:
469 +
470 + Green Synced means hotspot works normal.
471 +
472 +(% style="text-align:center" %)
212 212  [[image:1651828427715-679.png||height="374" width="635"]]
213 213  
214 214  
215 -== **2.4 Set the Port Forwarding** ==
476 +===== 2.4 Set the Port Forwarding =====
216 216  
478 +(((
479 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
480 +)))
217 217  
218 218  (((
219 -//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
483 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
220 220  )))
221 221  
486 +(((
487 + you may have.
488 +)))
489 +
490 +(% style="text-align:center" %)
222 222  [[image:1651828514449-658.png]]
223 223  
224 224  (((
... ... @@ -226,51 +226,51 @@
226 226  )))
227 227  
228 228  (((
229 -Note: Please refer to more detailed Settings
498 + Note: Please refer to more detailed Settings
230 230  )))
231 231  
232 232  (((
233 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
502 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
234 234  )))
235 235  
236 236  (((
237 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
238 -
239 -
506 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
240 240  )))
241 241  
242 -= **3. Check the configuration of HP0D** =
243 243  
244 -== **3.1 LoRa frequency configuration** ==
510 +==== 3. Check the configuration of HP0D ====
245 245  
512 +===== 3.1 LoRa frequency configuration =====
246 246  
514 +(% style="text-align:center" %)
247 247  [[image:1651828687205-178.png||height="323" width="657"]]
248 248  
249 249  
250 -== **3.2 Check the LoRaWAN Server Address** ==
251 251  
519 +===== 3.2 Check the LoRaWAN serveraddress =====
252 252  
521 +
522 +(% style="text-align:center" %)
253 253  [[image:1651828703680-156.png||height="349" width="672"]]
254 254  
255 255  
256 -== **3.3 Check Miner configuration** ==
526 +===== 3.3 Check Miner configuration =====
257 257  
258 -
528 +(% style="text-align:center" %)
259 259  [[image:image-20220506181408-1.png||height="451" width="513"]]
260 260  
261 -(((
262 -//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
531 +**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
263 263  
264 -
265 -)))
533 +**~ button of Update, and then wait 10mins to check here,**
266 266  
267 -= **4. Installation of Antenna** =
268 268  
536 +==== 4. Installation of Antenna ====
269 269  
270 270  (((
271 -//HP0D uses Fiber Glass Antenna.//
539 + HP0D use Fiber Glass Antenna.
272 272  )))
273 273  
542 +(% style="text-align:center" %)
274 274  [[image:1651832158606-882.png]]
275 275  
276 276  (((
... ... @@ -278,336 +278,214 @@
278 278  )))
279 279  
280 280  (((
281 -//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
282 -)))
283 -
284 -(((
285 -[[image:1651832205608-998.png||height="349" width="198"]]
286 -
287 287  
288 288  )))
289 289  
290 -= **5. SSH Access for Linux console** =
291 -
292 -
293 293  (((
294 -**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-63920a(%%))//**
554 + User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
295 295  )))
296 296  
297 297  (((
298 -//Port:  22//
558 + to antenna and install as below:
299 299  )))
300 300  
301 301  (((
302 -//User Name:      (% style="color:green" %)**root**//
562 +(% style="text-align:center" %)
563 +[[image:1651832205608-998.png||height="349" width="198"]]
303 303  )))
304 304  
305 -(((
306 -//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
566 +==== 5. SSH Access for Linux console ====
307 307  
308 -
568 +(((
569 + IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
309 309  )))
310 310  
311 311  (((
312 -//After logging in, you will be in the Linux console and can enter commands as shown below.//
313 -
314 -
573 + Port:         22
315 315  )))
316 316  
317 -[[image:1651832284160-991.png||height="171" width="729"]]
318 -
319 -
320 -= **6. How to change the Wireless function of HP0D** =
321 -
322 -//The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
323 -
324 -
325 -== **6.1 Access the Linux console.** ==
326 -
327 -//Follow the previous step of Step 5.//
328 -
329 -
330 -== **6.2 Install the package of network-manager** ==
331 -
332 -
333 -//Run commands~://
334 -
335 -(% class="box infomessage" %)
336 336  (((
337 - apt update
338 - apt install network-manager
577 + User Name:      **root**
339 339  )))
340 340  
341 -[[image:image-20220507140730-1.png||height="402" width="728"]]
342 -
343 -
344 -== **6.3 Reboot the device** ==
345 -
346 -
347 -//Run command~://
348 -
349 -(% class="box infomessage" %)
350 350  (((
351 - reboot
581 + Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
352 352  )))
353 353  
354 -[[image:image-20220507140814-2.png]]
355 -
356 -
357 -== **6.4 Check the wireless type** ==
358 -
359 -
360 -//Run command~://
361 -
362 -(% class="box infomessage" %)
363 363  (((
364 - iw dev
585 +
365 365  )))
366 366  
367 -[[image:image-20220507140941-3.png]]
368 -
369 -
370 -== **6.5 Connect the WiFi** ==
371 -
372 -
373 -//Run command~://
374 -
375 -(% class="box infomessage" %)
376 376  (((
377 - nmtui
589 + After logging in, you will be in the Linux console and can enter commands as shown below.
378 378  )))
379 379  
380 -[[image:image-20220507140953-4.png]]
592 +(% style="text-align:center" %)
593 +[[image:1651832284160-991.png]]
381 381  
382 382  
383 -= **7. Trouble Shootings** =
384 384  
385 -== **7.1 How to get a wallet address?** ==
386 386  
598 +==== 6. Trouble Shootings ====
387 387  
388 -**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
600 +===== 6.1 How to get a wallet address? =====
389 389  
602 +// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
390 390  
391 -== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
392 392  
605 +===== 6.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
393 393  
394 394  (((
395 -//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
608 + User can login the HP0D, able to access other Web Pages except miner page
396 396  )))
397 397  
398 398  (((
399 -//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
400 -
401 -
612 + If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
402 402  )))
403 403  
404 -== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
405 405  
616 +===== 6.3 Onboarding ~-~- Some parameters in miner page show timeout  =====
406 406  
618 +(% style="text-align:center" %)
407 407  [[image:image-20220506182042-2.png||height="250" width="516"]]
408 408  
621 +(% style="text-align:center" %)
409 409  [[image:1651832455372-647.png||height="224" width="520"]]
410 410  
411 411  
412 -**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
625 + HP0D is establish connection to Helium server and not finished. And you might see above.
413 413  
414 -**//It might relate to the network which might be up to 10mins.//**
627 + It might relate to the network where might up to 10mins
415 415  
416 416  
417 -== **7.4 Onboarding – Bad Gateway** ==
630 +===== 6.4 Onboarding – Bad Gaterway =====
418 418  
419 -
632 +(% style="text-align:center" %)
420 420  [[image:1651832583790-633.png]]
421 421  
635 + This is caused by the process leads too long which just need to refresh the page.
422 422  
423 -//**This is caused by the process leading too long which just needs to refresh the page.**//
424 424  
638 +1.
639 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
425 425  
426 -== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
641 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
427 427  
643 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
428 428  
429 -[[image:image-20220506182424-3.png]]
430 430  
646 +1.
647 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
431 431  
432 -(((
433 -//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
649 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
434 434  
435 -
436 -)))
651 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
437 437  
438 -== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
439 439  
440 -[[image:1651832742262-209.png||height="297" width="365"]]
654 +1.
655 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
441 441  
657 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
442 442  
443 -(((
444 -//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
659 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
445 445  
446 -
447 -)))
448 448  
449 -== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
662 +1.
663 +11. Onboarding – MAC address is being refreshed after scan QR Code
450 450  
665 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
451 451  
452 -[[image:1651832811038-780.png||height="462" width="216"]]
453 453  
668 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
454 454  
455 -(((
456 -//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
670 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
457 457  
458 -
459 -)))
460 460  
461 -== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
462 462  
463 463  
464 -(((
465 -//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
675 +1.
676 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
466 466  
467 -
468 -)))
678 +//This is caused by the server connection delay, which does not affect the normal use.//
469 469  
470 -(((
471 -//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
472 -)))
680 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
473 473  
474 -[[image:1651832880009-473.png]]
475 475  
683 +*
684 +*1. Mobile APP crash after scan the QR Code?
685 +* //Make sure you have input the correct Wallet address to generate QR Code.//
686 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
687 +* //Make sure your mobile app’s relevant permission are enabled.//
688 +* //Known: The Android 11 version may cause this kind of issue.//
476 476  
477 -== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
690 +1.
691 +11. Why the frequency/region is not the same what I purchased?
478 478  
693 +//Each HP0D is inspected and configured prior to shipping.//
479 479  
480 -**//This is caused by the server connection delay, which does not affect the regular use.//**
695 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
481 481  
482 -[[image:1651832959907-357.png]]
483 483  
698 +1.
699 +11. Can use the frequency to a region where is not support?
484 484  
485 -== **7.10 Mobile APP crash after scanning the QR Code?** ==
701 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
486 486  
487 -
488 -* //**Make sure you have input the correct Wallet address to generate QR Code.**//
489 -* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
490 -* //**Make sure your mobile app’s relevant permission is enabled.**//
491 -* //**Known: The Android 11 version may cause this kind of issue.**//
492 -
493 -
494 -== **7.11 Why the frequency/region is not the same as what I purchased?** ==
495 -
496 -
497 -(((
498 -//**Each HP0D is inspected and configured prior to shipping.**//
499 -)))
500 -
501 -(((
502 -//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
503 -
504 -
505 -)))
506 -
507 -== **7.12 Can use the frequency to a region where is no support?** ==
508 -
509 -
510 -(((
511 -//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
512 -)))
513 -
514 -(((
515 515  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
516 516  
517 -
518 -)))
519 519  
520 -== **7.13 Can change the frequency of the HP0D Miner?** ==
706 +1.
707 +11. Can change the frequency of the HP0D Miner?
521 521  
522 -
523 523  //We do not recommend doing this, it may damage your device//
524 524  
525 525  
526 -= **8. OTA Version Info** =
527 527  
528 -== **When does the OTA update happen?** ==
529 529  
530 530  
531 -**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
715 +1. Supports
532 532  
533 -== **# 2022/05/14** ==
717 +//If you are experiencing issues and can’t solve, you can send mail to//
534 534  
719 +[[//support@dragino.com//>>mailto:support@dragino.com]]
535 535  
536 -1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
537 -1. //Add postinst after auto-update//
538 -1. //Add Miner version mark.//
539 -1. //Add fast sync if miner GAP is large//
721 +//With your question as detail as possible. We will reply and help you in the shortest.//
540 540  
541 541  
542 -= **9. Supports** =
543 543  
544 -(((
545 -**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
546 -)))
547 547  
548 -(((
549 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
726 +1. Order Info
550 550  
551 -
552 -)))
728 +**HP0D-XXX**
553 553  
554 -= **10. Order Info** =
730 +**XXX**: Frequency Band
555 555  
556 -(% style="color:#0000ff" %)**HP0D-XXX**
732 +* 868: For Bands: EU868,IN865
733 +* 915: For Bands: US915,AU915,AS923,KR920
557 557  
558 -(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
735 +1. Manufacturer Info
559 559  
560 -* **AS923**: LoRaWAN AS923 band
561 -* **AU915**: LoRaWAN AU915 band
562 -* **EU868**: LoRaWAN EU868 band
563 -* **KR920**: LoRaWAN KR920 band
564 -* **US915**: LoRaWAN US915 band
565 -* **IN865**: LoRaWAN IN865 band
566 -
567 -
568 -= **11. Manufacturer Info** =
569 -
570 -(((
571 571  **Shenzhen Dragino Technology Development co. LTD**
572 -)))
573 573  
574 -(((
575 575  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
576 -)))
577 577  
578 -(((
579 -Longcheng Street, LongGang District; Shenzhen 518116, China
741 +LongCheng Street, LongGang District ; Shenzhen 518116,China
580 580  
581 581  
582 -
583 -)))
744 +1. FCC Warning
584 584  
585 -= 12. FCC Warning =
586 -
587 -(((
588 588  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
589 -)))
590 590  
591 -(((
592 592  ~-~- Reorient or relocate the receiving antenna.
593 -)))
594 594  
595 -(((
596 596  ~-~- Increase the separation between the equipment and receiver.
597 -)))
598 598  
599 -(((
600 600  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
601 -)))
602 602  
603 -(((
604 604  ~-~- Consult the dealer or an experienced radio/TV technician for help.
605 -)))
606 606  
607 -(((
756 +
608 608  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
609 -)))
610 610  
611 -(((
759 +
612 612  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
613 -)))
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content