Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 74.1
edited by Xiaoye
on 2022/05/12 15:16
Change comment: There is no comment for this version
To version 55.1
edited by Xiaoling
on 2022/05/06 18:18
Change comment: Uploaded new attachment "1651832284160-991.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -11,6 +11,7 @@
11 11  
12 12  
13 13  
14 +
14 14  {{toc/}}
15 15  
16 16  
... ... @@ -19,40 +19,123 @@
19 19  ===== 1.1 What is HP0D =====
20 20  
21 21  (((
22 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 +(((
24 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
23 23  )))
24 24  
25 25  (((
26 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
28 + Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
27 27  )))
28 28  
29 29  (((
30 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
32 + at low data rates.
31 31  )))
34 +)))
32 32  
33 33  (((
34 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
37 +(((
38 +
35 35  )))
40 +)))
36 36  
42 +(((
43 +(((
44 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
45 +)))
37 37  
47 +(((
48 + ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
49 +)))
50 +
51 +(((
52 + packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
53 +)))
54 +
55 +(((
56 + HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
57 +)))
58 +)))
59 +
60 +(((
61 +(((
62 +**~ and connects max 2 x LoRaWAN servers at the same time**.
63 +)))
64 +)))
65 +
66 +(((
67 +(((
68 +
69 +)))
70 +)))
71 +
72 +(((
73 +(((
74 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
75 +)))
76 +
77 +(((
78 + for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
79 +)))
80 +)))
81 +
82 +(((
83 +(((
84 +
85 +)))
86 +)))
87 +
88 +(((
89 +(((
90 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
91 +)))
92 +
93 +(((
94 + customize the frequency bands to use in their own LoRaWAN network.
95 +)))
96 +)))
97 +
98 +
38 38  ===== 1.2 Specifications =====
39 39  
101 +(((
40 40  **~ Hardware System:**
103 +)))
104 +
105 +(((
41 41   Linux Part:
107 +)))
42 42  
43 -* Raspberry Pi 4
109 +* (((
110 +Raspberry Pi 4
111 +)))
44 44  
113 +(((
45 45  **~ Interface:**
115 +)))
46 46  
47 -* 10M/100M RJ45 Ports x 1
48 -* LoRaWAN Wireless
49 -* Power Input: 12V 2A, DC
117 +* (((
118 +10M/100M RJ45 Ports x 1
119 +)))
120 +* (((
121 +LoRaWAN Wireless
122 +)))
123 +* (((
124 +Power Input: 12V 2A, DC
125 +)))
50 50  
127 +(((
51 51  **~ Operating Condition:**
129 +)))
52 52  
53 -* Work Temperature: -20 ~~ 65°C
54 -* Storage Temperature: -20 ~~ 65°C
55 -* Power Input: 12V 2A, DC
131 +* (((
132 +Work Temperature: -20 ~~ 65°C
133 +)))
134 +* (((
135 +Storage Temperature: -20 ~~ 65°C
136 +)))
137 +* (((
138 +Power Input: 12V 2A, DC
139 +)))
56 56  
57 57  ===== 1.3 Features =====
58 58  
... ... @@ -73,119 +73,222 @@
73 73  
74 74  ===== 1.4 Label info and login name =====
75 75  
76 -[[image:1651803959860-394.png||height="500" width="375"]]
77 -**Label information:**
78 -**Device host name:**    (% class="mark" %)dragino-xxxxxx
79 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
80 -**Miner animal name**: xxx-xxx-xxx
81 -**Miner address**:       112xxxxxx
82 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
83 -**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
84 -**SN**:  device serial number.
85 85  
161 +(% style="text-align:center" %)
162 +[[image:1651803959860-394.png||height="653" width="490"]]
163 +
164 +
165 +
166 +(((
167 +**~ Label information:**
168 +)))
169 +
170 +(((
171 +
172 +)))
173 +
174 +(((
175 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
176 +)))
177 +
178 +(((
179 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
180 +)))
181 +
182 +(((
183 +**~ Miner animal name**: xxx-xxx-xxx
184 +)))
185 +
186 +(((
187 +**~ Miner address**:          112xxxxxx
188 +)))
189 +
190 +(((
191 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
192 +)))
193 +
194 +(((
195 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
196 +)))
197 +
198 +(((
199 +**~ SN**:  device serial number.
200 +)))
201 +
202 +
86 86  ==== 2. Quick Start & Onboarding ====
87 87  
88 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
205 +(((
206 +(((
207 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after
208 +)))
89 89  
210 +(((
211 + connecting to its Wi-Fi network, or via its WAN Ethernet port.
212 +)))
213 +)))
90 90  
215 +(% class="wikigeneratedid" id="H-2" %)
216 +(((
217 +
218 +)))
219 +
91 91  ===== 2.1  Connect HP0D Web UI =====
92 92  
93 93  ====== 2.1.1 via HP0D’s Access Point. ======
94 94  
95 -At the first boot of HP0D, it will auto generate a Wi-Fi network
224 +(((
225 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
226 +)))
96 96  
97 -[[image:1651804327535-321.png||height="325" width="199"]]
228 +(((
229 +
230 +)))
98 98  
99 -(% class="box infomessage" %)
100 - called           : **//HPD-dragino-xxxxxx//**
232 +(((
233 + called           : **//HPD-dragino-xxxxxx//**
234 +)))
101 101  
102 -(% class="box infomessage" %)
103 - with password:  **//dragino+dragino//**
104 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
236 +(((
237 + with password:  **//dragino+dragino//**
238 +)))
105 105  
106 -[[image:1651804397792-591.png||height="402" width="763"]]
240 +(((
241 +
242 +)))
107 107  
244 +(((
245 +
246 +)))
108 108  
248 +(((
249 + You can use a PC to connect to this Wi-Fi network. The PC will
250 +)))
251 +
252 +(((
253 + get an IP address 10.130.1.xxx and the HP0D has the default
254 +)))
255 +
256 +(((
257 + IP 10.130.1.1
258 +)))
259 +
260 +
261 +
262 +
263 +
264 +
265 +(% style="text-align:center" %)
266 +[[image:1651804397792-591.png]]
267 +
268 +
269 +
109 109  ====== 2.1.2 Connect via HP0D hostname ======
110 110  
111 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
272 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
112 112  
113 -Like: __**//http:~/~/dragino-4ba54a//**__
274 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
114 114  
276 + Web-UI via HP0D’s hostname.
277 +
278 +
279 + Like: __**//http:~/~/dragino-4ba54a//**__
280 +
281 +
282 +(% style="text-align:center" %)
115 115  [[image:1651804629009-699.png]]
116 116  
117 117  
118 118  ====== 2.1.3 Connect via Ethernet Port ======
119 119  
120 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
121 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
288 +(((
289 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
290 +)))
291 +
292 +(((
293 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
294 +)))
295 +
296 +(((
297 +
298 +)))
299 +
300 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
301 +
302 +(% style="text-align:center" %)
122 122  [[image:1651804782523-623.png]]
123 123  
124 124  
306 +
125 125  ===== 2.2 Generate QR Code =====
126 126  
127 127  (((
128 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
310 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
129 129  )))
130 130  
131 131  (((
132 -Note: After onboarding, this wallet will become owner of this hotspot.
314 + Note: After onboarding, this wallet will become owner of this hotspot.
133 133  )))
134 134  
135 -[[image:image-20220506140312-1.png||height="435" width="438"]]
317 +(% style="text-align:center" %)
318 +[[image:image-20220506140312-1.png]]
136 136  
137 137  
138 138  ===== 2.3 Onboarding Hotspot =====
139 139  
140 140  (((
141 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
324 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
142 142  )))
143 143  
144 144  (((
145 -Note: the APP version need to be greater than 3.11.
328 + Note: the APP version need to be greater than 3.11.
329 +)))
146 146  
331 +(((
147 147  
148 148  )))
149 149  
150 150  (((
151 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
336 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
152 152  )))
153 153  
154 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
339 +(((
340 + the ‘DRAGINO Miner HP0D’
341 +)))
155 155  
343 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
156 156  
157 -3. Scan the QR Code you generated in the previous step.
345 + 3. Scan the QR Code you generated in the previous step.
158 158  
347 +(% style="text-align:center" %)
159 159  [[image:1651828211026-220.png||height="405" width="191"]]
160 160  
350 + 4. Onboarding your device
161 161  
162 -(((
163 -4. Onboarding your device
164 -)))
352 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
165 165  
166 -(((
167 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  
168 -)))
354 + mobile to onboarding server might have issue.
169 169  
170 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
356 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
171 171  
172 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
358 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
173 173  
174 174  
175 175  5. Check onboarding status
176 176  
177 -You can check from mobile:
363 + You can check from mobile:
178 178  
179 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
365 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
180 180  
181 -You can also see the hotspot status in below link:
367 + You can also see the hotspot status in below link:
182 182  
183 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
369 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
184 184  
185 -Example:
371 + Example:
186 186  
187 -Green Synced means hotspot works normal.
373 + Green Synced means hotspot works normal.
188 188  
375 +(% style="text-align:center" %)
189 189  [[image:1651828427715-679.png||height="374" width="635"]]
190 190  
191 191  
... ... @@ -192,9 +192,18 @@
192 192  ===== 2.4 Set the Port Forwarding =====
193 193  
194 194  (((
195 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
382 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
196 196  )))
197 197  
385 +(((
386 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
387 +)))
388 +
389 +(((
390 + you may have.
391 +)))
392 +
393 +(% style="text-align:center" %)
198 198  [[image:1651828514449-658.png]]
199 199  
200 200  (((
... ... @@ -202,15 +202,15 @@
202 202  )))
203 203  
204 204  (((
205 -Note: Please refer to more detailed Settings
401 + Note: Please refer to more detailed Settings
206 206  )))
207 207  
208 208  (((
209 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
405 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
210 210  )))
211 211  
212 212  (((
213 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
409 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
214 214  )))
215 215  
216 216  
... ... @@ -218,254 +218,192 @@
218 218  
219 219  ===== 3.1 LoRa frequency configuration =====
220 220  
417 +(% style="text-align:center" %)
221 221  [[image:1651828687205-178.png||height="323" width="657"]]
222 222  
223 223  
421 +
224 224  ===== 3.2 Check the LoRaWAN serveraddress =====
225 225  
424 +
425 +(% style="text-align:center" %)
226 226  [[image:1651828703680-156.png||height="349" width="672"]]
227 227  
228 228  
229 -===== 3.3 Check Miner configuration =====
230 230  
231 -[[image:image-20220506181408-1.png||height="451" width="513"]]
232 232  
233 -(((
234 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
235 -)))
236 236  
237 237  
238 -==== 4. Installation of Antenna ====
239 239  
240 -(((
241 -HP0D use Fiber Glass Antenna.
242 -)))
243 243  
244 -[[image:1651832158606-882.png]]
435 +1.
436 +11. Check Miner configuration
245 245  
246 -(((
247 -
248 -)))
438 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
249 249  
250 -(((
251 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
252 -)))
440 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
253 253  
254 -(((
255 -[[image:1651832205608-998.png||height="349" width="198"]]
256 -)))
257 257  
258 -==== 5. SSH Access for Linux console ====
259 259  
260 -(((
261 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
262 -)))
263 263  
264 -(((
265 -Port:         22
266 -)))
267 267  
268 -(((
269 -User Name:      **root**
270 -)))
446 +1. Installation of Antenna
271 271  
272 -(((
273 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
274 -)))
448 +HP0D use Fiber Glass Antenna.
275 275  
276 -(((
277 -After logging in, you will be in the Linux console and can enter commands as shown below.
278 -)))
450 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
279 279  
280 -[[image:1651832284160-991.png]]
452 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
281 281  
282 282  
283 -==== **6. How to change the Wireless function of HP0D** ====
455 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
284 284  
285 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
286 286  
287 -===== **6.1 Access the Linux console.** =====
288 288  
289 -Follow the previous step of Step 5.
290 290  
291 291  
292 -===== 6.2 Install the package of network-manager. =====
461 +1. SSH Access for Linux console
293 293  
294 -Run commands:
463 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
295 295  
296 -(% class="box infomessage" %)
297 -(((
298 - apt update
299 - apt install network-manager
300 -)))
465 +Port:         22
301 301  
302 -[[image:image-20220507140730-1.png]]
467 +User Name:      **root**
303 303  
469 +Password:         **Randomly generated （found on device’s label ）**
304 304  
305 -===== 6.3 Reboot the device. =====
306 306  
307 -Run command:
472 +After logging in, you will be in the Linux console and can enter commands as shown below.
308 308  
309 -(% class="box infomessage" %)
310 -(((
311 - reboot
312 -)))
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
313 313  
314 -[[image:image-20220507140814-2.png]]
315 315  
316 316  
317 -===== 6.4 Check the wireless type =====
318 318  
319 -Run command:
479 +1. Trouble Shootings
480 +11. How to get a wallet address?
320 320  
321 -(% class="box infomessage" %)
322 -(((
323 - iw dev
324 -)))
482 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
325 325  
326 -[[image:image-20220507140941-3.png]]
327 327  
328 -===== 6.5 Connect the WiFi. =====
485 +1.
486 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
329 329  
330 -Run command:
488 +//User can login the HP0D, able to access other Web Pages except miner page//
331 331  
332 -(% class="box infomessage" %)
333 -(((
334 - nmtui
335 -)))
336 336  
337 -[[image:image-20220507140953-4.png]]
491 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
338 338  
339 339  
340 -==== 7. Trouble Shootings ====
494 +1.
495 +11. Onboarding ~-~- Some parameters in miner page show timeout
341 341  
342 -===== 7.1 How to get a wallet address? =====
497 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
343 343  
344 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
499 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
345 345  
501 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
346 346  
347 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
503 +//It might relate to the network where might up to 10mins//
348 348  
349 -(((
350 -User can login the HP0D, able to access other Web Pages except miner page.
351 -)))
352 352  
353 -(((
354 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
355 -)))
506 +1.
507 +11. Onboarding – Bad Gaterway
356 356  
509 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
357 357  
358 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
511 +//This is caused by the process leads too long which just need to refresh the page.//
359 359  
360 -[[image:image-20220506182042-2.png||height="250" width="516"]]
361 361  
362 -[[image:1651832455372-647.png||height="224" width="520"]]
514 +1.
515 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
363 363  
364 -HP0D is establish connection to Helium server and not finished. And you might see above.
517 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
365 365  
366 -It might relate to the network where might up to 10mins.
519 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
367 367  
368 368  
369 -===== 7.4 Onboarding – Bad Gaterway =====
522 +1.
523 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
370 370  
371 -[[image:1651832583790-633.png]]
525 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
372 372  
373 -This is caused by the process leads too long which just need to refresh the page.
527 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
374 374  
375 375  
376 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
530 +1.
531 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
377 377  
378 -[[image:image-20220506182424-3.png]]
533 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
379 379  
380 -(((
381 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
382 -)))
535 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
383 383  
384 384  
385 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
538 +1.
539 +11. Onboarding – MAC address is being refreshed after scan QR Code
386 386  
387 -[[image:1651832742262-209.png||height="297" width="365"]]
541 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
388 388  
389 -(((
390 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
391 -)))
392 392  
544 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
393 393  
394 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
546 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
395 395  
396 -[[image:1651832811038-780.png||height="462" width="216"]]
397 397  
398 -(((
399 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
400 -)))
401 401  
402 402  
403 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
551 +1.
552 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
404 404  
405 -(((
406 -After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
407 -)))
554 +//This is caused by the server connection delay, which does not affect the normal use.//
408 408  
409 -(((
410 -If you don’t see MAC address, make sure your mobile has good internet connection.
411 -)))
556 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
412 412  
413 -[[image:1651832880009-473.png]]
414 414  
559 +*
560 +*1. Mobile APP crash after scan the QR Code?
561 +* //Make sure you have input the correct Wallet address to generate QR Code.//
562 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
563 +* //Make sure your mobile app’s relevant permission are enabled.//
564 +* //Known: The Android 11 version may cause this kind of issue.//
415 415  
416 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
566 +1.
567 +11. Why the frequency/region is not the same what I purchased?
417 417  
418 -This is caused by the server connection delay, which does not affect the normal use.
569 +//Each HP0D is inspected and configured prior to shipping.//
419 419  
420 -[[image:1651832959907-357.png]]
571 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
421 421  
422 422  
423 -===== 7.10 Mobile APP crash after scan the QR Code? =====
574 +1.
575 +11. Can use the frequency to a region where is not support?
424 424  
425 -* Make sure you have input the correct Wallet address to generate QR Code.
426 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
427 -* Make sure your mobile app’s relevant permission are enabled.
428 -* Known: The Android 11 version may cause this kind of issue.
577 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
429 429  
430 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
579 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
431 431  
432 -(((
433 -Each HP0D is inspected and configured prior to shipping.
434 -)))
435 435  
436 -(((
437 -If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
438 -)))
582 +1.
583 +11. Can change the frequency of the HP0D Miner?
439 439  
585 +//We do not recommend doing this, it may damage your device//
440 440  
441 -===== 7.12 Can use the frequency to a region where is not support? =====
442 442  
443 -(((
444 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
445 -)))
446 446  
447 -(((
448 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
449 -)))
450 450  
451 451  
452 -===== 7.13 Can change the frequency of the HP0D Miner? =====
591 +1. Supports
453 453  
454 -We do not recommend doing this, it may damage your device
593 +//If you are experiencing issues and can’t solve, you can send mail to//
455 455  
595 +[[//support@dragino.com//>>mailto:support@dragino.com]]
456 456  
457 -==== 8. Supports ====
597 +//With your question as detail as possible. We will reply and help you in the shortest.//
458 458  
459 -(((
460 -If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
461 -)))
462 462  
463 -(((
464 -With your question as detail as possible. We will reply and help you in the shortest.
465 -)))
466 466  
467 467  
468 -==== 9. Order Info ====
602 +1. Order Info
469 469  
470 470  **HP0D-XXX**
471 471  
... ... @@ -474,55 +474,29 @@
474 474  * 868: For Bands: EU868,IN865
475 475  * 915: For Bands: US915,AU915,AS923,KR920
476 476  
477 -==== 10. Manufacturer Info ====
611 +1. Manufacturer Info
478 478  
479 -(((
480 480  **Shenzhen Dragino Technology Development co. LTD**
481 -)))
482 482  
483 -(((
484 484  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
485 -)))
486 486  
487 -(((
488 488  LongCheng Street, LongGang District ; Shenzhen 518116,China
489 -)))
490 490  
491 491  
492 -==== 11. FCC Warning ====
620 +1. FCC Warning
493 493  
494 -(((
495 495  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
496 -)))
497 497  
498 -(((
499 499  ~-~- Reorient or relocate the receiving antenna.
500 -)))
501 501  
502 -(((
503 503  ~-~- Increase the separation between the equipment and receiver.
504 -)))
505 505  
506 -(((
507 507  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
508 -)))
509 509  
510 -(((
511 511  ~-~- Consult the dealer or an experienced radio/TV technician for help.
512 -)))
513 513  
514 -(((
515 -
516 -)))
517 517  
518 -(((
519 519  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
520 -)))
521 521  
522 -(((
523 -
524 -)))
525 525  
526 -(((
527 527  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
528 -)))
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content