Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.6
edited by Xiaoling
on 2022/05/07 15:07
Change comment: There is no comment for this version
To version 89.1
edited by Xiaoye
on 2022/05/31 17:05
Change comment: Uploaded new attachment "image-20220531170501-7.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,130 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
7 +
8 +
9 9  )))
10 10  
11 +**Table of Contents：**
11 11  
12 -
13 -
14 -
15 15  {{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
16 += **1. Introduction** =
19 19  
20 -===== 1.1 What is HP0D =====
18 +== **1.1 What is HP0D** ==
21 21  
22 22  (((
23 -(((
24 -(((
25 25  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 26  )))
27 -)))
28 -)))
29 29  
30 30  (((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
34 34  )))
35 -)))
36 -)))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
42 42  )))
43 -)))
44 -)))
45 45  
46 46  (((
47 -(((
48 -(((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 -)))
51 -)))
52 -)))
53 -
54 -(((
55 -(((
56 -(((
57 57  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
36 +== **1.2 Specifications** ==
62 62  
63 -===== 1.2 Specifications =====
64 -
65 -(((
66 -(((
67 67  **~ Hardware System:**
68 -)))
69 -)))
70 -
71 -(((
72 -(((
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
41 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 85  **~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
104 104  
105 -(((
106 -(((
107 107  **~ Operating Condition:**
108 -)))
109 -)))
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
126 126  
127 -===== 1.3 Features =====
55 +== **1.3 Features** ==
128 128  
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
... ... @@ -141,209 +141,153 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
145 145  
146 -
147 147  [[image:1651803959860-394.png||height="500" width="375"]]
148 148  
149 -(((
150 -(((
151 -**Label information:**
152 -)))
153 -)))
154 154  
155 -(((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
158 -)))
159 -)))
160 160  
161 -(((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 -)))
165 -)))
78 +=== 1.4.1 Label information: ===
166 166  
167 -(((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
170 -)))
171 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
172 172  
173 -(((
174 -(((
175 -**Miner address**:          112xxxxxx
176 -)))
177 -)))
178 178  
179 -(((
180 -(((
181 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
182 -)))
183 -)))
89 += **2. Quick Start & Onboarding** =
184 184  
185 -(((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 -)))
189 -)))
190 -
191 -(((
192 -(((
193 -**SN**:  device serial number.
194 -)))
195 -)))
196 -
197 -
198 -==== 2. Quick Start & Onboarding ====
199 -
200 -(((
201 -(((
202 202  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 -)))
204 -)))
205 205  
206 -(% class="wikigeneratedid" id="H-2" %)
207 -(((
208 -
209 -)))
210 210  
211 -===== 2.1  Connect HP0D Web UI =====
94 +== **2.1  Connect HP0D Web UI** ==
212 212  
213 -====== 2.1.1 via HP0D’s Access Point. ======
96 +=== **2.1.1 via HP0D’s Access Point** ===
214 214  
215 -(((
216 -(((
217 -At the first boot of HP0D, it will auto generate a Wi-Fi network
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
218 218  
100 +
219 219  [[image:1651804327535-321.png||height="325" width="199"]]
220 -)))
221 -)))
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
228 228  
229 -(((
230 -(((
231 231  (% class="box infomessage" %)
232 232  (((
233 - called           : **//HPD-dragino-xxxxxx//**
106 + called  : **//HPD-dragino-xxxxxx//**
234 234  )))
235 -)))
236 -)))
237 237  
238 -(((
239 -(((
240 240  (% class="box infomessage" %)
241 241  (((
242 242   with password:  **//dragino+dragino//**
243 -)))
244 -)))
245 -)))
246 -
247 -(((
248 -(((
249 249  You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 250  )))
251 -)))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
254 254  
116 +[[image:1651804397792-591.png||height="386" width="733"]]
255 255  
256 -====== 2.1.2 Connect via HP0D hostname ======
257 257  
258 -(((
259 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
119 +=== **2.1.2 Connect via HP0D hostname** ===
260 260  
261 -Like: __**//http:~/~/dragino-4ba54a//**__
262 -)))
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
263 263  
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 +
125 +
264 264  [[image:1651804629009-699.png]]
265 265  
128 +=== **2.1.3 Connect via Ethernet Port** ===
266 266  
267 -====== 2.1.3 Connect via Ethernet Port ======
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
268 268  
269 -(((
270 -(((
271 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
272 -)))
273 -)))
274 274  
275 -(((
276 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
277 -)))
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
278 278  
135 +
279 279  [[image:1651804782523-623.png]]
280 280  
281 281  
282 -===== 2.2 Generate QR Code =====
139 +== **2.2 Generate QR Code** ==
283 283  
141 +
284 284  (((
285 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
286 286  )))
287 287  
288 288  (((
289 -Note: After onboarding, this wallet will become owner of this hotspot.
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
149 +
290 290  )))
291 291  
292 292  [[image:image-20220506140312-1.png||height="435" width="438"]]
293 293  
294 294  
295 -===== 2.3 Onboarding Hotspot =====
155 +== **2.3 Onboarding Hotspot** ==
296 296  
157 +
297 297  (((
298 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
299 299  )))
300 300  
301 301  (((
302 -Note: the APP version need to be greater than 3.11.
163 +**//Note: the APP version needs to be greater than 3.11.//**
303 303  
304 304  
305 305  )))
306 306  
307 307  (((
308 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 +
171 +
309 309  )))
310 310  
311 311   [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
312 312  
313 313  
314 -3. Scan the QR Code you generated in the previous step.
177 +//**3. **Scan the QR Code you generated in the previous step.//
315 315  
316 316  [[image:1651828211026-220.png||height="405" width="191"]]
317 317  
318 318  
319 -4. Onboarding your device
182 +(((
183 +//**4. **Onboarding your device//
184 +)))
320 320  
321 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
186 +(((
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
322 322  
323 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
189 +
190 +)))
324 324  
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
325 325  
326 -5. Check onboarding status
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
327 327  
328 -You can check from mobile:
329 329  
197 +**5. **//Check onboarding status where you can check from mobile~://
198 +
330 330   [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
331 331  
332 -You can also see the hotspot status in below link:
333 333  
334 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
202 +//You can also see the hotspot status in the below link~://
335 335  
336 -Example:
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
337 337  
338 -Green Synced means hotspot works normal.
206 +//Example~://
339 339  
208 +
209 +**//Green Synced means hotspot works normally.//**
210 +
340 340  [[image:1651828427715-679.png||height="374" width="635"]]
341 341  
342 342  
343 -===== 2.4 Set the Port Forwarding =====
214 +== **2.4 Set the Port Forwarding** ==
344 344  
216 +
345 345  (((
346 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
347 347  )))
348 348  
349 349  [[image:1651828514449-658.png]]
... ... @@ -362,32 +362,40 @@
362 362  
363 363  (((
364 364  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
238 +
365 365  )))
366 366  
241 += **3. Check the configuration of HP0D** =
367 367  
368 -==== 3. Check the configuration of HP0D ====
243 +== **3.1 LoRa frequency configuration** ==
369 369  
370 -===== 3.1 LoRa frequency configuration =====
371 371  
372 372  [[image:1651828687205-178.png||height="323" width="657"]]
373 373  
374 374  
375 -===== 3.2 Check the LoRaWAN serveraddress =====
249 +== **3.2 Check the LoRaWAN Server Address** ==
376 376  
251 +
377 377  [[image:1651828703680-156.png||height="349" width="672"]]
378 378  
379 379  
380 -===== 3.3 Check Miner configuration =====
255 +== **3.3 Check Miner configuration** ==
381 381  
257 +
382 382  [[image:image-20220506181408-1.png||height="451" width="513"]]
383 383  
384 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
260 +(((
261 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
385 385  
263 +
264 +)))
386 386  
387 -==== 4. Installation of Antenna ====
266 += **4. Installation of Antenna** =
388 388  
268 +
389 389  (((
390 -HP0D use Fiber Glass Antenna.
270 +//HP0D uses Fiber Glass Antenna.//
391 391  )))
392 392  
393 393  [[image:1651832158606-882.png]]
... ... @@ -397,238 +397,348 @@
397 397  )))
398 398  
399 399  (((
400 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
280 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
401 401  )))
402 402  
403 403  (((
404 404  [[image:1651832205608-998.png||height="349" width="198"]]
285 +
286 +
405 405  )))
406 406  
407 -==== 5. SSH Access for Linux console ====
289 += **5. SSH Access for Linux console** =
408 408  
291 +
409 409  (((
410 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
293 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-63920a(%%))//**
411 411  )))
412 412  
413 413  (((
414 -Port:         22
297 +//Port:  22//
415 415  )))
416 416  
417 417  (((
418 -User Name:      **root**
301 +//User Name:      (% style="color:green" %)**root**//
419 419  )))
420 420  
421 421  (((
422 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
305 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
306 +
307 +
423 423  )))
424 424  
425 425  (((
426 -After logging in, you will be in the Linux console and can enter commands as shown below.
311 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
312 +
313 +
427 427  )))
428 428  
429 -[[image:1651832284160-991.png]]
316 +[[image:1651832284160-991.png||height="171" width="729"]]
430 430  
431 431  
432 -==== **6. How to change the Wireless function of HP0D** ====
319 += **6. How to change the Wireless function of HP0D** =
433 433  
434 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
321 +//The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
435 435  
436 -===== **6.1 Access the Linux console.** =====
437 437  
438 -Follow the previous step of Step 5.
324 +== **6.1 Access the Linux console.** ==
439 439  
326 +//Follow the previous step of Step 5.//
440 440  
441 -===== 6.2 Install the package of network-manager. =====
442 442  
443 -Run commands:
329 +== **6.2 Install the package of network-manager** ==
444 444  
331 +
332 +//Run commands~://
333 +
445 445  (% class="box infomessage" %)
446 446  (((
447 - apt update
448 - apt install network-manager
336 + apt update
337 + apt install network-manager
449 449  )))
450 450  
451 -[[image:image-20220507140730-1.png]]
340 +[[image:image-20220507140730-1.png||height="402" width="728"]]
452 452  
453 453  
454 -===== 6.3 Reboot the device. =====
343 +== **6.3 Reboot the device** ==
455 455  
456 -Run command:
457 457  
346 +//Run command~://
347 +
458 458  (% class="box infomessage" %)
459 459  (((
460 - reboot
350 + reboot
461 461  )))
462 462  
463 463  [[image:image-20220507140814-2.png]]
464 464  
465 -===== 6.4 Check the wireless type =====
466 466  
467 -Run command:
356 +== **6.4 Check the wireless type** ==
468 468  
358 +
359 +//Run command~://
360 +
469 469  (% class="box infomessage" %)
470 470  (((
471 - iw dev
363 + iw dev
472 472  )))
473 473  
474 474  [[image:image-20220507140941-3.png]]
475 475  
476 -===== 6.5 Connect the WiFi. =====
477 477  
478 -Run command:
369 +== **6.5 Connect the WiFi** ==
479 479  
371 +
372 +//Run command~://
373 +
480 480  (% class="box infomessage" %)
481 481  (((
482 - nmtui
376 + nmtui
483 483  )))
484 484  
485 485  [[image:image-20220507140953-4.png]]
486 486  
487 487  
488 -==== 7. Trouble Shootings ====
382 += **7. Trouble Shootings** =
489 489  
490 -===== 7.1 How to get a wallet address? =====
384 +== **7.1 How to get a wallet address?** ==
491 491  
492 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
493 493  
387 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
494 494  
495 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
496 496  
390 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
391 +
392 +
497 497  (((
498 -User can login the HP0D, able to access other Web Pages except miner page.
394 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
499 499  )))
500 500  
501 501  (((
502 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
398 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
399 +
400 +
503 503  )))
504 504  
403 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
505 505  
506 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
507 507  
508 508  [[image:image-20220506182042-2.png||height="250" width="516"]]
509 509  
510 510  [[image:1651832455372-647.png||height="224" width="520"]]
511 511  
512 -HP0D is establish connection to Helium server and not finished. And you might see above.
513 513  
514 -It might relate to the network where might up to 10mins.
411 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
515 515  
413 +**//It might relate to the network which might be up to 10mins.//**
516 516  
517 -===== 7.4 Onboarding – Bad Gaterway =====
518 518  
416 +== **7.4 Onboarding – Bad Gateway** ==
417 +
418 +
519 519  [[image:1651832583790-633.png]]
520 520  
521 -This is caused by the process leads too long which just need to refresh the page.
522 522  
422 +//**This is caused by the process leading too long which just needs to refresh the page.**//
523 523  
524 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
525 525  
425 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
426 +
427 +
526 526  [[image:image-20220506182424-3.png]]
527 527  
430 +
528 528  (((
529 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
432 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
433 +
434 +
530 530  )))
531 531  
437 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
532 532  
533 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
534 -
535 535  [[image:1651832742262-209.png||height="297" width="365"]]
536 536  
537 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
538 538  
442 +(((
443 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
539 539  
540 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
445 +
446 +)))
541 541  
448 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
449 +
450 +
542 542  [[image:1651832811038-780.png||height="462" width="216"]]
543 543  
544 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
545 545  
454 +(((
455 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
546 546  
547 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
457 +
458 +)))
548 548  
549 -After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
460 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
550 550  
551 -If you don’t see MAC address, make sure your mobile has good internet connection.
552 552  
463 +(((
464 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
465 +
466 +
467 +)))
468 +
469 +(((
470 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
471 +)))
472 +
553 553  [[image:1651832880009-473.png]]
554 554  
555 555  
556 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
476 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
557 557  
558 -This is caused by the server connection delay, which does not affect the normal use.
559 559  
479 +**//This is caused by the server connection delay, which does not affect the regular use.//**
480 +
560 560  [[image:1651832959907-357.png]]
561 561  
562 562  
563 -===== 7.10 Mobile APP crash after scan the QR Code? =====
484 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
564 564  
565 -* Make sure you have input the correct Wallet address to generate QR Code.
566 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
567 -* Make sure your mobile app’s relevant permission are enabled.
568 -* Known: The Android 11 version may cause this kind of issue.
569 569  
487 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
488 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
489 +* //**Make sure your mobile app’s relevant permission is enabled.**//
490 +* //**Known: The Android 11 version may cause this kind of issue.**//
570 570  
571 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
492 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
572 572  
573 -Each HP0D is inspected and configured prior to shipping.
574 574  
575 -If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
495 +(((
496 +//**Each HP0D is inspected and configured prior to shipping.**//
497 +)))
576 576  
499 +(((
500 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
577 577  
578 -===== 7.12 Can use the frequency to a region where is not support? =====
502 +
503 +)))
579 579  
580 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link
505 +== **7.12 Can use the frequency to a region where is no support?** ==
581 581  
507 +
508 +(((
509 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
510 +)))
511 +
512 +(((
582 582  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
583 583  
515 +
516 +)))
584 584  
585 -===== 7.13 Can change the frequency of the HP0D Miner? =====
518 +== **7.13 Can change the frequency of the HP0D Miner?** ==
586 586  
587 -We do not recommend doing this, it may damage your device
588 588  
521 +//We do not recommend doing this, it may damage your device//
589 589  
590 -==== 8. Supports ====
591 591  
592 -If you are experiencing issues and can’t solve, you can send mail to
524 +== **7.14 Low Reward and not transmit issue** ==
593 593  
594 -[[support@dragino.com>>mailto:support@dragino.com]]
595 595  
596 -With your question as detail as possible. We will reply and help you in the shortest.
527 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
597 597  
529 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
598 598  
599 -==== 9. Order Info ====
531 +[[image:image-20220527114519-1.png||height="579" width="851"]]
600 600  
601 -**HP0D-XXX**
602 602  
603 -**XXX**: Frequency Band
534 += **8. OTA Version Info** =
604 604  
605 -* 868: For Bands: EU868,IN865
606 -* 915: For Bands: US915,AU915,AS923,KR920
536 +== **When does the OTA update happen?** ==
607 607  
608 608  
609 -==== 10. Manufacturer Info ====
539 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
610 610  
541 +== **# 2022/05/14** ==
542 +
543 +
544 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
545 +1. //Add postinst after auto-update//
546 +1. //Add Miner version mark.//
547 +1. //Add fast sync if miner GAP is large//
548 +
549 +== **# 2022/05/24** ==
550 +
551 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
552 +
553 +
554 += **9. Supports** =
555 +
556 +(((
557 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
558 +)))
559 +
560 +(((
561 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
562 +
563 +
564 +)))
565 +
566 += **10. Order Info** =
567 +
568 +(% style="color:#0000ff" %)**HP0D-XXX**
569 +
570 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
571 +
572 +* **AS923**: LoRaWAN AS923 band
573 +* **AU915**: LoRaWAN AU915 band
574 +* **EU868**: LoRaWAN EU868 band
575 +* **KR920**: LoRaWAN KR920 band
576 +* **US915**: LoRaWAN US915 band
577 +* **IN865**: LoRaWAN IN865 band
578 +
579 += **11. Manufacturer Info** =
580 +
581 +(((
611 611  **Shenzhen Dragino Technology Development co. LTD**
583 +)))
612 612  
585 +(((
613 613  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
587 +)))
614 614  
615 -LongCheng Street, LongGang District ; Shenzhen 518116,China
589 +(((
590 +Longcheng Street, LongGang District; Shenzhen 518116, China
616 616  
617 617  
618 -==== 11. FCC Warning ====
593 +
594 +)))
619 619  
596 += **12. FCC Warning** =
597 +
598 +(((
620 620  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
600 +)))
621 621  
602 +(((
622 622  ~-~- Reorient or relocate the receiving antenna.
604 +)))
623 623  
606 +(((
624 624  ~-~- Increase the separation between the equipment and receiver.
608 +)))
625 625  
610 +(((
626 626  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
612 +)))
627 627  
614 +(((
628 628  ~-~- Consult the dealer or an experienced radio/TV technician for help.
616 +)))
629 629  
630 -
618 +(((
631 631  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
620 +)))
632 632  
633 -
622 +(((
634 634  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
624 +)))
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content