Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.3
edited by Xiaoling
on 2022/05/07 14:30
Change comment: There is no comment for this version
To version 127.1
edited by Xiaoye
on 2022/06/09 15:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,130 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
7 +
8 +
9 9  )))
10 10  
11 +**Table of Contents：**
11 11  
12 -
13 -
14 -
15 15  {{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
16 += **1. Introduction** =
19 19  
20 -===== 1.1 What is HP0D =====
18 +== **1.1 What is HP0D** ==
21 21  
22 22  (((
23 -(((
24 -(((
25 25  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 26  )))
27 -)))
28 -)))
29 29  
30 30  (((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
34 34  )))
35 -)))
36 -)))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
42 42  )))
43 -)))
44 -)))
45 45  
46 46  (((
47 -(((
48 -(((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 -)))
51 -)))
52 -)))
53 -
54 -(((
55 -(((
56 -(((
57 57  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
36 +== **1.2 Specifications** ==
62 62  
63 -===== 1.2 Specifications =====
64 -
65 -(((
66 -(((
67 67  **~ Hardware System:**
68 -)))
69 -)))
70 -
71 -(((
72 -(((
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
41 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 85  **~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
104 104  
105 -(((
106 -(((
107 107  **~ Operating Condition:**
108 -)))
109 -)))
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
126 126  
127 -===== 1.3 Features =====
55 +== **1.3 Features** ==
128 128  
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
... ... @@ -141,579 +141,686 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
145 145  
146 -
147 147  [[image:1651803959860-394.png||height="500" width="375"]]
148 148  
149 -(((
150 -(((
151 -**Label information:**
152 -)))
153 -)))
154 154  
77 +
78 +=== 1.4.1 Label information: ===
79 +
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
87 +
88 +
89 += **2. Quick Start & Onboarding** =
90 +
91 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
92 +
93 +
94 +== **2.1  Connect HP0D Web UI** ==
95 +
96 +=== **2.1.1 via HP0D’s Access Point** ===
97 +
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 +
100 +
101 +[[image:1651804327535-321.png||height="325" width="199"]]
102 +
103 +
104 +(% class="box infomessage" %)
155 155  (((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
106 + called  : **//HPD-dragino-xxxxxx//**
158 158  )))
159 -)))
160 160  
109 +(% class="box infomessage" %)
161 161  (((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
164 164  )))
165 -)))
166 166  
115 +
116 +[[image:1651804397792-591.png||height="386" width="733"]]
117 +
118 +
119 +=== **2.1.2 Connect via HP0D hostname** ===
120 +
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 +
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 +
125 +
126 +[[image:1651804629009-699.png]]
127 +
128 +=== **2.1.3 Connect via Ethernet Port** ===
129 +
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 +
132 +
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 +
135 +
136 +[[image:1651804782523-623.png]]
137 +
138 +
139 +== **2.2 Generate QR Code** ==
140 +
141 +
167 167  (((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
170 170  )))
171 -)))
172 172  
173 173  (((
174 -(((
175 -**Miner address**:          112xxxxxx
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
149 +
176 176  )))
177 -)))
178 178  
152 +[[image:image-20220506140312-1.png||height="435" width="438"]]
153 +
154 +
155 +== **2.3 Onboarding Hotspot** ==
156 +
157 +
179 179  (((
180 -(((
181 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
182 182  )))
183 -)))
184 184  
185 185  (((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
163 +**//Note: the APP version needs to be greater than 3.11.//**
164 +
165 +
188 188  )))
189 -)))
190 190  
191 191  (((
192 -(((
193 -**SN**:  device serial number.
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 +
171 +
194 194  )))
195 -)))
196 196  
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
197 197  
198 -==== 2. Quick Start & Onboarding ====
199 199  
177 +//**3. **Scan the QR Code you generated in the previous step.//
178 +
179 +[[image:1651828211026-220.png||height="405" width="191"]]
180 +
181 +
200 200  (((
201 -(((
202 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
183 +//**4. **Onboarding your device//
203 203  )))
204 -)))
205 205  
206 -(% class="wikigeneratedid" id="H-2" %)
207 207  (((
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
188 +
208 208  
209 209  )))
210 210  
211 -===== 2.1  Connect HP0D Web UI =====
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
212 212  
213 -====== 2.1.1 via HP0D’s Access Point. ======
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
214 214  
215 -(((
216 -(((
217 - At the first boot of HP0D, it will auto generate a Wi-Fi network
218 218  
219 -[[image:1651804327535-321.png||height="325" width="199"]]
197 +**5. **//Check onboarding status where you can check from mobile~://
198 +
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
200 +
201 +
202 +//You can also see the hotspot status in the below link~://
203 +
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
205 +
206 +//Example~://
207 +
208 +
209 +**//Green Synced means hotspot works normally.//**
210 +
211 +[[image:1651828427715-679.png||height="374" width="635"]]
212 +
213 +
214 +== **2.4 Set the Port Forwarding** ==
215 +
216 +
217 +(((
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
220 220  )))
221 -)))
222 222  
221 +[[image:1651828514449-658.png]]
222 +
223 223  (((
224 -(((
225 225  
226 226  )))
227 -)))
228 228  
229 229  (((
230 -(((
231 -(% class="box infomessage" %)
232 -(((
233 - called           : **//HPD-dragino-xxxxxx//**
228 +Note: Please refer to more detailed Settings
234 234  )))
235 -)))
236 -)))
237 237  
238 238  (((
239 -(((
240 -(% class="box infomessage" %)
241 -(((
242 - with password:  **//dragino+dragino//**
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
243 243  )))
244 -)))
245 -)))
246 246  
247 247  (((
248 -(((
249 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
238 +
250 250  )))
251 -)))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
241 += **3. Check the configuration of HP0D** =
254 254  
243 +== **3.1 LoRa frequency configuration** ==
255 255  
256 256  
257 -====== 2.1.2 Connect via HP0D hostname ======
246 +[[image:1651828687205-178.png||height="323" width="657"]]
258 258  
259 -(((
260 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
261 -)))
262 262  
263 -Like: __**//http:~/~/dragino-4ba54a//**__
249 +== **3.2 Check the LoRaWAN Server Address** ==
264 264  
265 -[[image:1651804629009-699.png]]
266 266  
252 +[[image:image-20220607160428-1.png||height="472" width="654"]]
267 267  
268 -====== 2.1.3 Connect via Ethernet Port ======
269 269  
255 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
256 +
257 +[[image:image-20220607161130-2.png||height="501" width="1112"]]
258 +
259 +[[image:image-20220607161603-3.png||height="557" width="1113"]]
260 +
261 +[[image:image-20220607161812-4.png||height="699" width="1115"]]
262 +
263 +
264 +[[image:image-20220607162635-5.png||height="339" width="1110"]]
265 +
266 +[[image:image-20220607162859-6.png]]
267 +
268 +== **3.3 Check Miner configuration** ==
269 +
270 +
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
272 +
270 270  (((
271 -(((
272 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 +
276 +
277 +== **//3.4 Check the Miner state//** ==
278 +
279 +
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 +
282 +
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
284 +
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
289 +
273 273  )))
274 -)))
275 275  
292 += **4. Installation of Antenna** =
293 +
294 +
276 276  (((
277 -(((
278 - router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
296 +//HP0D uses Fiber Glass Antenna.//
279 279  )))
280 -)))
281 281  
299 +[[image:1651832158606-882.png]]
300 +
282 282  (((
283 283  
284 284  )))
285 285  
286 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
305 +(((
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 +)))
287 287  
288 - or SSH access of HP0D.
309 +(((
310 +[[image:1651832205608-998.png||height="349" width="198"]]
289 289  
290 -(% style="text-align:center" %)
291 -[[image:1651804782523-623.png]]
312 +
313 +)))
292 292  
315 += **5. SSH Access for Linux console** =
293 293  
294 294  
295 -===== 2.2 Generate QR Code =====
318 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
296 296  
297 -(((
298 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
299 -)))
320 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
300 300  
301 -(((
302 - Note: After onboarding, this wallet will become owner of this hotspot.
303 -)))
322 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
304 304  
305 -(% style="text-align:center" %)
306 -[[image:image-20220506140312-1.png||height="435" width="438"]]
324 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
307 307  
308 308  
309 -===== 2.3 Onboarding Hotspot =====
327 +Below are screenshots:
310 310  
329 +[[image:image-20220608202027-1.png]]
330 +
311 311  (((
312 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
332 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
313 313  )))
314 314  
315 315  (((
316 - Note: the APP version need to be greater than 3.11.
336 +//Port:  22//
317 317  )))
318 318  
319 319  (((
320 -
340 +//User Name:      (% style="color:green" %)**root**//
321 321  )))
322 322  
323 323  (((
324 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
344 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
345 +
346 +
325 325  )))
326 326  
327 327  (((
328 - the ‘DRAGINO Miner HP0D’
350 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
351 +
352 +
329 329  )))
330 330  
331 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
355 +[[image:image-20220608202118-2.png]]
332 332  
333 - 3. Scan the QR Code you generated in the previous step.
334 334  
335 -(% style="text-align:center" %)
336 -[[image:1651828211026-220.png||height="405" width="191"]]
358 += **6. How to change the Wireless function of HP0D** =
337 337  
338 - 4. Onboarding your device
360 +//The wireless function is configured as AP by default and the web page does not support configuration,//
339 339  
340 - Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
362 +//if you want to configure it as STA(client)connection mode,//
341 341  
342 - mobile to onboarding server might have issue.
364 +//you can configure your WiFi info on the** /Network/WiFi **page.//
343 343  
344 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
345 345  
346 - [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
367 +**//Note: the wireless state is as AP//**
347 347  
369 +[[image:image-20220531170243-5.png||height="469" width="967"]]
348 348  
349 -5. Check onboarding status
350 350  
351 - You can check from mobile:
372 +== **6.1 Access WiFi configuration page** ==
352 352  
353 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
354 354  
355 - You can also see the hotspot status in below link:
375 +[[image:image-20220531165803-2.png]]
356 356  
357 - https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
358 358  
359 - Example:
378 +== **6.2 Enter your WiFi information and save** ==
360 360  
361 - Green Synced means hotspot works normal.
362 362  
363 -(% style="text-align:center" %)
364 -[[image:1651828427715-679.png||height="374" width="635"]]
381 +[[image:image-20220531165958-3.png]]
365 365  
366 366  
367 -===== 2.4 Set the Port Forwarding =====
384 +== **6.3 Change the WiFi mode.** ==
368 368  
369 -(((
370 - Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
371 -)))
372 372  
373 -(((
374 - it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
375 -)))
387 +[[image:image-20220531170131-4.png]]
376 376  
377 -(((
378 - you may have.
379 -)))
389 +== **6.4 Wait system to restart** ==
380 380  
381 -(% style="text-align:center" %)
382 -[[image:1651828514449-658.png]]
383 383  
384 -(((
385 -
386 -)))
392 +[[image:image-20220531170501-7.png]]
387 387  
388 -(((
389 - Note: Please refer to more detailed Settings
390 -)))
391 391  
395 +//**Note: When the time remaining is finished it will turn to the home page.**//
396 +
397 +
398 +== **6.5 Check the STA state** ==
399 +
400 +
401 +[[image:image-20220531170705-8.png||height="484" width="990"]]
402 +
403 +
404 += **7. Trouble Shootings** =
405 +
406 +== **7.1 How to get a wallet address?** ==
407 +
408 +
409 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 +
411 +
412 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 +
414 +
392 392  (((
393 - [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
416 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
394 394  )))
395 395  
396 396  (((
397 - [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
420 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
421 +
422 +
398 398  )))
399 399  
425 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
400 400  
401 -==== 3. Check the configuration of HP0D ====
402 402  
403 -===== 3.1 LoRa frequency configuration =====
428 +[[image:image-20220506182042-2.png||height="250" width="516"]]
404 404  
405 -(% style="text-align:center" %)
406 -[[image:1651828687205-178.png||height="323" width="657"]]
430 +[[image:1651832455372-647.png||height="224" width="520"]]
407 407  
408 408  
433 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
409 409  
410 -===== 3.2 Check the LoRaWAN serveraddress =====
435 +**//It might relate to the network which might be up to 10mins.//**
411 411  
412 412  
413 -(% style="text-align:center" %)
414 -[[image:1651828703680-156.png||height="349" width="672"]]
438 +== **7.4 Onboarding – Bad Gateway** ==
415 415  
416 416  
417 -===== 3.3 Check Miner configuration =====
441 +[[image:1651832583790-633.png]]
418 418  
419 -(% style="text-align:center" %)
420 -[[image:image-20220506181408-1.png||height="451" width="513"]]
421 421  
422 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
444 +//**This is caused by the process leading too long which just needs to refresh the page.**//
423 423  
424 -**~ button of Update, and then wait 10mins to check here,**
425 425  
447 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
426 426  
427 -==== 4. Installation of Antenna ====
428 428  
429 -(((
430 - HP0D use Fiber Glass Antenna.
431 -)))
450 +[[image:image-20220506182424-3.png]]
432 432  
433 -(% style="text-align:center" %)
434 -[[image:1651832158606-882.png]]
435 435  
436 436  (((
454 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 +
437 437  
438 438  )))
439 439  
459 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
460 +
461 +[[image:1651832742262-209.png||height="297" width="365"]]
462 +
463 +
440 440  (((
465 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 +
441 441  
442 442  )))
443 443  
444 -(((
445 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
446 -)))
470 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
447 447  
448 -(((
449 - to antenna and install as below:
450 -)))
451 451  
452 -(((
453 -(% style="text-align:center" %)
454 -[[image:1651832205608-998.png||height="349" width="198"]]
455 -)))
473 +[[image:1651832811038-780.png||height="462" width="216"]]
456 456  
457 -==== 5. SSH Access for Linux console ====
458 458  
459 459  (((
460 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
461 -)))
477 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
462 462  
463 -(((
464 - Port:         22
479 +
465 465  )))
466 466  
467 -(((
468 - User Name:      **root**
469 -)))
482 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
470 470  
471 -(((
472 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
473 -)))
474 474  
475 475  (((
486 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
487 +
476 476  
477 477  )))
478 478  
479 479  (((
480 - After logging in, you will be in the Linux console and can enter commands as shown below.
492 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
481 481  )))
482 482  
483 -(% style="text-align:center" %)
484 -[[image:1651832284160-991.png]]
495 +[[image:1651832880009-473.png]]
485 485  
486 486  
487 -==== **6. How to change the Wireless function of HP0D** ====
498 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
488 488  
489 - // The wireless function is configured as AP by default and the web page does not support configuration, //
490 490  
491 -// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
501 +**//This is caused by the server connection delay, which does not affect the regular use.//**
492 492  
493 -===== **6.1 Access the Linux console.** =====
503 +[[image:1651832959907-357.png]]
494 494  
495 - Follow the previous step of Step 5.
496 496  
506 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
497 497  
498 -===== 6.2 Install the package of network-manager. =====
499 499  
500 - Run commands:
509 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 +* //**Make sure your mobile app’s relevant permission is enabled.**//
512 +* //**Known: The Android 11 version may cause this kind of issue.**//
501 501  
502 -(% class="box infomessage" %)
514 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 +
516 +
503 503  (((
504 - apt update
505 - apt install network-manager
518 +//**Each HP0D is inspected and configured prior to shipping.**//
506 506  )))
507 507  
508 -[[image:image-20220507140730-1.png]]
521 +(((
522 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
509 509  
524 +
525 +)))
510 510  
527 +== **7.12 Can use the frequency to a region where is no support?** ==
511 511  
512 -===== 6.3 Reboot the device. =====
513 513  
514 - Run command:
530 +(((
531 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 +)))
515 515  
516 -(% class="box infomessage" %)
517 517  (((
518 - reboot
535 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
536 +
537 +
519 519  )))
520 520  
521 -[[image:image-20220507140814-2.png]]
540 +== **7.13 Can change the frequency of the HP0D Miner?** ==
522 522  
523 -===== 6.4 Check the wireless type =====
524 524  
525 - Run command:
543 +//We do not recommend doing this, it may damage your device//
526 526  
527 -(% class="box infomessage" %)
528 -(((
529 - iw dev
530 -)))
531 531  
532 -[[image:image-20220507140941-3.png]]
546 +== **7.14 Low Reward and not transmit issue** ==
533 533  
534 -===== 6.5 Connect the WiFi. =====
535 535  
536 - Run command:
549 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
537 537  
538 -(% class="box infomessage" %)
539 -(((
540 - nmtui
541 -)))
551 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
542 542  
543 -[[image:image-20220507140953-4.png]]
553 +[[image:image-20220527114519-1.png||height="579" width="851"]]
544 544  
545 545  
556 +== **7.15 Why is my miner version not the latest** ==
546 546  
547 -==== 7. Trouble Shootings ====
548 548  
549 -===== 7.1 How to get a wallet address? =====
559 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
550 550  
551 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
561 +//However, the download and upgrade may fail due to the network.//
552 552  
563 +//So **We offer a manual check method:**//
553 553  
554 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
565 + **// Use the "draginoups" command to check//**
555 555  
556 -(((
557 - User can login the HP0D, able to access other Web Pages except miner page
558 -)))
567 +[[image:image-20220601101358-1.png]]
559 559  
560 -(((
561 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
562 -)))
563 563  
564 564  
565 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
571 += **8. How to reset the hotspot OS to the factory settings** =
566 566  
567 -(% style="text-align:center" %)
568 -[[image:image-20220506182042-2.png||height="250" width="516"]]
573 +The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
569 569  
570 -(% style="text-align:center" %)
571 -[[image:1651832455372-647.png||height="224" width="520"]]
575 +So you have to re-flash the image into the SD card.
572 572  
573 573  
574 - HP0D is establish connection to Helium server and not finished. And you might see above.
578 +//**Preparations:**//
575 575  
576 - It might relate to the network where might up to 10mins
580 +1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
577 577  
582 +2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
578 578  
579 -===== 7.4 Onboarding – Bad Gaterway =====
584 +3. //A card reader device//
580 580  
581 -(% style="text-align:center" %)
582 -[[image:1651832583790-633.png]]
586 +4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
583 583  
584 - This is caused by the process leads too long which just need to refresh the page.
588 +5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
585 585  
590 +=== ===
586 586  
587 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
592 +=== **Step 1.  Formatting the SD Card** ===
588 588  
589 -(% style="text-align:center" %)
590 -[[image:image-20220506182424-3.png]]
591 591  
592 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
595 +[[image:image-20220609111027-9.png]]
593 593  
594 - device block height is much lower than the current height as the above picture like '1 1', the QR code
595 595  
596 - generation may fail.
598 +=== **Step 2. Select the OS image ** ===
597 597  
598 598  
599 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
601 +[[image:image-20220609104907-8.png]]
600 600  
601 -(% style="text-align:center" %)
602 -[[image:1651832742262-209.png||height="297" width="365"]]
603 603  
604 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
604 +=== **Step 3. Select the target ** ===
605 605  
606 - click the button of ‘Clean’ to re-generate the QR Code.
607 607  
607 +[[image:image-20220609104637-2.png]]
608 608  
609 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
609 +[[image:image-20220609104701-3.png]]
610 610  
611 -(% style="text-align:center" %)
612 -[[image:1651832811038-780.png||height="462" width="216"]]
613 613  
614 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
612 +=== **Step 4. Flash start** ===
615 615  
616 - please contact us to help you solve.
617 617  
615 +[[image:image-20220609104727-4.png]]
618 618  
619 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
617 +[[image:image-20220609104741-5.png]]
620 620  
621 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
622 622  
623 - public key/ wallet address to onboarding server. Server will return the match MAC address
620 +=== **Flash Complete** ===
624 624  
625 - for this hotspot.
626 626  
623 +[[image:image-20220609104415-1.png]]
627 627  
628 - If you don’t see MAC address, make sure your mobile has good internet connection.
629 629  
630 -(% style="text-align:center" %)
631 -[[image:1651832880009-473.png]]
626 +== **Step 4. Re-install the SD card into the hotspot and boot it** ==
632 632  
633 633  
634 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
629 +== **Step 5. Configure the correct region for the miner** ==
635 635  
636 - This is caused by the server connection delay, which does not affect the normal use.
631 +**by the default, the factory settings apply to the US915.**
637 637  
633 +**if your region is not the US915, you have to configure the correct region for the miner.**
638 638  
639 -(% style="text-align:center" %)
640 -[[image:1651832959907-357.png]]
641 641  
642 -===== 7.10 Mobile APP crash after scan the QR Code? =====
636 +**Access the hotspot CLI, and run these Linux commands**
643 643  
644 -* Make sure you have input the correct Wallet address to generate QR Code.
645 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
646 -* Make sure your mobile app’s relevant permission are enabled.
647 -* Known: The Android 11 version may cause this kind of issue.
648 648  
649 -1.
650 -11. Why the frequency/region is not the same what I purchased?
639 +~#~##update the software of dragino
651 651  
652 -//Each HP0D is inspected and configured prior to shipping.//
641 +apt update
653 653  
654 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
643 +apt install dragino*
655 655  
645 +[[image:image-20220609150452-2.png||height="348" width="909"]]
656 656  
657 -1.
658 -11. Can use the frequency to a region where is not support?
659 659  
660 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
661 661  
662 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
649 +~#~##configure the correct region for the miner and update it
663 663  
651 +uci set miner.general.region=<Region; Such as AS923-1/AU915/US915/EU868/IN865>
664 664  
665 -1.
666 -11. Can change the frequency of the HP0D Miner?
653 +uci commit miner
667 667  
668 -//We do not recommend doing this, it may damage your device//
655 +minerup update
669 669  
670 670  
671 671  
659 +~#~##check the miner version
672 672  
661 +draginoups
673 673  
674 -1. Supports
675 675  
676 -//If you are experiencing issues and can’t solve, you can send mail to//
664 += **9. OTA Version Info** =
677 677  
678 -[[//support@dragino.com//>>mailto:support@dragino.com]]
666 +== **When does the OTA update happen?** ==
679 679  
680 -//With your question as detail as possible. We will reply and help you in the shortest.//
681 681  
669 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
682 682  
671 +== **# 2022/05/14** ==
683 683  
684 684  
685 -1. Order Info
674 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
675 +1. //Add postinst after auto-update//
676 +1. //Add Miner version mark.//
677 +1. //Add fast sync if miner GAP is large//
686 686  
687 -**HP0D-XXX**
679 +== **# 2022/05/24** ==
688 688  
689 -**XXX**: Frequency Band
681 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
690 690  
691 -* 868: For Bands: EU868,IN865
692 -* 915: For Bands: US915,AU915,AS923,KR920
693 693  
694 -1. Manufacturer Info
684 += **10. Supports** =
695 695  
686 +(((
687 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
688 +)))
689 +
690 +(((
691 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
692 +
693 +
694 +)))
695 +
696 += **11. Order Info** =
697 +
698 +(% style="color:#0000ff" %)**HP0D-XXX**
699 +
700 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
701 +
702 +* **AS923**: LoRaWAN AS923 band
703 +* **AU915**: LoRaWAN AU915 band
704 +* **EU868**: LoRaWAN EU868 band
705 +* **KR920**: LoRaWAN KR920 band
706 +* **US915**: LoRaWAN US915 band
707 +* **IN865**: LoRaWAN IN865 band
708 +
709 += **12. Manufacturer Info** =
710 +
711 +(((
696 696  **Shenzhen Dragino Technology Development co. LTD**
713 +)))
697 697  
715 +(((
698 698  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
717 +)))
699 699  
700 -LongCheng Street, LongGang District ; Shenzhen 518116,China
719 +(((
720 +Longcheng Street, LongGang District; Shenzhen 518116, China
701 701  
702 702  
703 -1. FCC Warning
723 +
724 +)))
704 704  
726 += **13. FCC Warning** =
727 +
728 +(((
705 705  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
730 +)))
706 706  
732 +(((
707 707  ~-~- Reorient or relocate the receiving antenna.
734 +)))
708 708  
736 +(((
709 709  ~-~- Increase the separation between the equipment and receiver.
738 +)))
710 710  
740 +(((
711 711  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
742 +)))
712 712  
744 +(((
713 713  ~-~- Consult the dealer or an experienced radio/TV technician for help.
746 +)))
714 714  
715 -
748 +(((
716 716  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
750 +)))
717 717  
718 -
752 +(((
719 719  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
754 +)))
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
image-20220609104637-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20220609104701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.8 KB
Content
image-20220609104727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +18.2 KB
Content
image-20220609104741-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.7 KB
Content
image-20220609104805-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104813-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104907-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.4 KB
Content
image-20220609111027-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.2 KB
Content
image-20220609141625-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
image-20220609150452-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content