Changes for page HP0D -- Full Hotspot for Helium User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -11,6 +11,7 @@
11	11
12	12
13	13
	14	+
14	14	{{toc/}}
15	15
16	16
...	...	@@ -19,39 +19,109 @@
19	19	===== 1.1 What is HP0D =====
20	20
21	21	(((
	23	+(((
	24	+(((
22	22	The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23	23	)))
	27	+)))
	28	+)))
24	24
25	25	(((
26		-HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
	31	+(((
	32	+(((
	33	+HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
27	27	)))
	35	+)))
	36	+)))
28	28
29	29	(((
	39	+(((
	40	+(((
	41	+HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
	42	+)))
	43	+)))
	44	+)))
	45	+
	46	+(((
	47	+(((
	48	+(((
30	30	**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31	31	)))
	51	+)))
	52	+)))
32	32
33	33	(((
	55	+(((
	56	+(((
34	34	HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35	35	)))
	59	+)))
	60	+)))
36	36
37	37
38	38	===== 1.2 Specifications =====
	64	+
	65	+(((
	66	+(((
39	39	**~ Hardware System:**
	68	+)))
	69	+)))
	70	+
	71	+(((
	72	+(((
40	40	Linux Part:
	74	+)))
	75	+)))
41	41
42		-* Raspberry Pi 4
	77	+* (((
	78	+(((
	79	+Raspberry Pi 4
	80	+)))
	81	+)))
43	43
	83	+(((
	84	+(((
44	44	**~ Interface:**
	86	+)))
	87	+)))
45	45
46		-* 10M/100M RJ45 Ports x 1
47		-* LoRaWAN Wireless
48		-* Power Input: 12V 2A, DC
	89	+* (((
	90	+(((
	91	+10M/100M RJ45 Ports x 1
	92	+)))
	93	+)))
	94	+* (((
	95	+(((
	96	+LoRaWAN Wireless
	97	+)))
	98	+)))
	99	+* (((
	100	+(((
	101	+Power Input: 12V 2A, DC
	102	+)))
	103	+)))
49	49
	105	+(((
	106	+(((
50	50	**~ Operating Condition:**
	108	+)))
	109	+)))
51	51
52		-* Work Temperature: -20 ~~ 65°C
53		-* Storage Temperature: -20 ~~ 65°C
54		-* Power Input: 12V 2A, DC
	111	+* (((
	112	+(((
	113	+Work Temperature: -20 ~~ 65°C
	114	+)))
	115	+)))
	116	+* (((
	117	+(((
	118	+Storage Temperature: -20 ~~ 65°C
	119	+)))
	120	+)))
	121	+* (((
	122	+(((
	123	+Power Input: 12V 2A, DC
	124	+)))
	125	+)))
55	55
56	56	===== 1.3 Features =====
57	57
...	...	@@ -72,42 +72,122 @@
72	72
73	73	===== 1.4 Label info and login name =====
74	74
	146	+
75	75	[[image:1651803959860-394.png||height="500" width="375"]]
	148	+
	149	+(((
	150	+(((
76	76	**Label information:**
77		-**Device host name:**    (% class="mark" %)dragino-xxxxxx
78		-**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
79		-**Miner animal name**: xxx-xxx-xxx
80		-**Miner address**:       112xxxxxx
	152	+)))
	153	+)))
	154	+
	155	+(((
	156	+(((
	157	+**Device host name:**      (% class="mark" %)dragino-xxxxxx
	158	+)))
	159	+)))
	160	+
	161	+(((
	162	+(((
	163	+**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
	164	+)))
	165	+)))
	166	+
	167	+(((
	168	+(((
	169	+**Miner animal name**: xxx-xxx-xxx
	170	+)))
	171	+)))
	172	+
	173	+(((
	174	+(((
	175	+**Miner address**:          112xxxxxx
	176	+)))
	177	+)))
	178	+
	179	+(((
	180	+(((
81	81	**Eth MAC address**: A8: 40: 41: EF: FE: CD
82		-**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
83		-**SN**:  device serial number.
	182	+)))
	183	+)))
84	84
	185	+(((
	186	+(((
	187	+**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
	188	+)))
	189	+)))
	190	+
	191	+(((
	192	+(((
	193	+**SN**:  device serial number.
	194	+)))
	195	+)))
	196	+
	197	+
85	85	==== 2. Quick Start & Onboarding ====
86	86
	200	+(((
	201	+(((
87	87	The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
	203	+)))
	204	+)))
88	88
	206	+(% class="wikigeneratedid" id="H-2" %)
	207	+(((
	208	+
	209	+)))
89	89
90	90	===== 2.1  Connect HP0D Web UI =====
91	91
92	92	====== 2.1.1 via HP0D’s Access Point. ======
93	93
94		-At the first boot of HP0D, it will auto generate a Wi-Fi network
	215	+(((
	216	+(((
	217	+ At the first boot of HP0D, it will auto generate a Wi-Fi network
95	95
96	96	[[image:1651804327535-321.png||height="325" width="199"]]
	220	+)))
	221	+)))
97	97
	223	+(((
	224	+(((
	225	+
	226	+)))
	227	+)))
	228	+
	229	+(((
	230	+(((
98	98	(% class="box infomessage" %)
99		- called           : **//HPD-dragino-xxxxxx//**
	232	+(((
	233	+ called           : **//HPD-dragino-xxxxxx//**
	234	+)))
	235	+)))
	236	+)))
100	100
	238	+(((
	239	+(((
101	101	(% class="box infomessage" %)
102		- with password:  **//dragino+dragino//**
103		-You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
	241	+(((
	242	+ with password:  **//dragino+dragino//**
	243	+)))
	244	+)))
	245	+)))
104	104
	247	+(((
	248	+(((
	249	+ You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
	250	+)))
	251	+)))
	252	+
105	105	[[image:1651804397792-591.png||height="402" width="763"]]
106	106
107	107
	256	+
108	108	====== 2.1.2 Connect via HP0D hostname ======
109	109
	259	+(((
110	110	Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
	261	+)))
111	111
112	112	Like: __**//http:~/~/dragino-4ba54a//**__
113	113
...	...	@@ -116,8 +116,16 @@
116	116
117	117	====== 2.1.3 Connect via Ethernet Port ======
118	118
	270	+(((
	271	+(((
119	119	Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
	273	+)))
	274	+)))
	275	+
	276	+(((
120	120	If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
	278	+)))
	279	+
121	121	[[image:1651804782523-623.png]]
122	122
123	123
...	...	@@ -150,7 +150,7 @@
150	150	2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
151	151	)))
152	152
153		- [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
	312	+ [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
154	154
155	155
156	156	3. Scan the QR Code you generated in the previous step.
...	...	@@ -158,24 +158,16 @@
158	158	[[image:1651828211026-220.png||height="405" width="191"]]
159	159
160	160
161		-(((
162	162	4. Onboarding your device
163		-)))
164	164
165		-(((
166		-Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
167		-)))
	322	+Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]] [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
168	168
169		-[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
170	170
171		- [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
172		-
173		-
174	174	5. Check onboarding status
175	175
176	176	You can check from mobile:
177	177
178		- [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
	329	+ [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
179	179
180	180	You can also see the hotspot status in below link:
181	181
...	...	@@ -229,9 +229,7 @@
229	229
230	230	[[image:image-20220506181408-1.png||height="451" width="513"]]
231	231
232		-(((
233		-**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
234		-)))
	383	+**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
235	235
236	236
237	237	==== 4. Installation of Antenna ====
...	...	@@ -294,8 +294,8 @@
294	294
295	295	(% class="box infomessage" %)
296	296	(((
297		- apt update
298		- apt install network-manager
	446	+ apt update
	447	+ apt install network-manager
299	299	)))
300	300
301	301	[[image:image-20220507140730-1.png]]
...	...	@@ -307,7 +307,7 @@
307	307
308	308	(% class="box infomessage" %)
309	309	(((
310		- reboot
	459	+ reboot
311	311	)))
312	312
313	313	[[image:image-20220507140814-2.png]]
...	...	@@ -318,7 +318,7 @@
318	318
319	319	(% class="box infomessage" %)
320	320	(((
321		- iw dev
	470	+ iw dev
322	322	)))
323	323
324	324	[[image:image-20220507140941-3.png]]
...	...	@@ -329,7 +329,7 @@
329	329
330	330	(% class="box infomessage" %)
331	331	(((
332		- nmtui
	481	+ nmtui
333	333	)))
334	334
335	335	[[image:image-20220507140953-4.png]]
...	...	@@ -359,65 +359,72 @@
359	359
360	360	[[image:1651832455372-647.png||height="224" width="520"]]
361	361
362		-HP0D is establish connection to Helium server and not finished. And you might see above.
	511	+HP0D is establish connection to Helium server and not finished. And you might see above.It might relate to the network where might up to 10mins.
363	363
364		-It might relate to the network where might up to 10mins.
365	365
366		-
367	367	===== 7.4 Onboarding – Bad Gaterway =====
368	368
	516	+(% style="text-align:center" %)
369	369	[[image:1651832583790-633.png]]
370	370
371		-This is caused by the process leads too long which just need to refresh the page.
	519	+ This is caused by the process leads too long which just need to refresh the page.
372	372
373	373
374	374	7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
375	375
	524	+(% style="text-align:center" %)
376	376	[[image:image-20220506182424-3.png]]
377	377
378		-(((
379		-This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
380		-)))
	527	+ This may be related to the current block height, if the device is synchronizing to the latest height or if the
381	381
	529	+ device block height is much lower than the current height as the above picture like '1 1', the QR code
382	382
	531	+ generation may fail.
	532	+
	533	+
383	383	===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
384	384
	536	+(% style="text-align:center" %)
385	385	[[image:1651832742262-209.png||height="297" width="365"]]
386	386
387		-(((
388		-Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
389		-)))
	539	+ Please ensure that you enter the correct wallet address and that your network is up and running, the user can
390	390
	541	+ click the button of ‘Clean’ to re-generate the QR Code.
391	391
	543	+
392	392	===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
393	393
	546	+(% style="text-align:center" %)
394	394	[[image:1651832811038-780.png||height="462" width="216"]]
395	395
396		-(((
397		-If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
398		-)))
	549	+ If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
399	399
	551	+ please contact us to help you solve.
400	400
	553	+
401	401	===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
402	402
403		-(((
404		-After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
405		-)))
	556	+// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
406	406
407		-(((
408		-If you don’t see MAC address, make sure your mobile has good internet connection.
409		-)))
	558	+ public key/ wallet address to onboarding server. Server will return the match MAC address
410	410
	560	+ for this hotspot.
	561	+
	562	+
	563	+ If you don’t see MAC address, make sure your mobile has good internet connection.
	564	+
	565	+(% style="text-align:center" %)
411	411	[[image:1651832880009-473.png]]
412	412
413	413
414	414	===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
415	415
416		-This is caused by the server connection delay, which does not affect the normal use.
	571	+ This is caused by the server connection delay, which does not affect the normal use.
417	417
	573	+
	574	+(% style="text-align:center" %)
418	418	[[image:1651832959907-357.png]]
419	419
420		-
421	421	===== 7.10 Mobile APP crash after scan the QR Code? =====
422	422
423	423	* Make sure you have input the correct Wallet address to generate QR Code.
...	...	@@ -425,46 +425,44 @@
425	425	* Make sure your mobile app’s relevant permission are enabled.
426	426	* Known: The Android 11 version may cause this kind of issue.
427	427
428		-===== 7.11 Why the frequency/region is not the same what I purchased? =====
	584	+1.
	585	+11. Why the frequency/region is not the same what I purchased?
429	429
430		-(((
431		-Each HP0D is inspected and configured prior to shipping.
432		-)))
	587	+//Each HP0D is inspected and configured prior to shipping.//
433	433
434		-(((
435		-If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
436		-)))
	589	+//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
437	437
438	438
439		-===== 7.12 Can use the frequency to a region where is not support? =====
	592	+1.
	593	+11. Can use the frequency to a region where is not support?
440	440
441		-(((
442		-Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
443		-)))
	595	+//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
444	444
445		-(((
446	446	[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
447		-)))
448	448
449	449
450		-===== 7.13 Can change the frequency of the HP0D Miner? =====
	600	+1.
	601	+11. Can change the frequency of the HP0D Miner?
451	451
452		-We do not recommend doing this, it may damage your device
	603	+//We do not recommend doing this, it may damage your device//
453	453
454	454
455		-==== 8. Supports ====
456	456
457		-(((
458		-If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
459		-)))
460	460
461		-(((
462		-With your question as detail as possible. We will reply and help you in the shortest.
463		-)))
464	464
	609	+1. Supports
465	465
466		-==== 9. Order Info ====
	611	+//If you are experiencing issues and can’t solve, you can send mail to//
467	467
	613	+[[//support@dragino.com//>>mailto:support@dragino.com]]
	614	+
	615	+//With your question as detail as possible. We will reply and help you in the shortest.//
	616	+
	617	+
	618	+
	619	+
	620	+1. Order Info
	621	+
468	468	**HP0D-XXX**
469	469
470	470	**XXX**: Frequency Band
...	...	@@ -472,55 +472,29 @@
472	472	* 868: For Bands: EU868,IN865
473	473	* 915: For Bands: US915,AU915,AS923,KR920
474	474
475		-==== 10. Manufacturer Info ====
	629	+1. Manufacturer Info
476	476
477		-(((
478	478	**Shenzhen Dragino Technology Development co. LTD**
479		-)))
480	480
481		-(((
482	482	Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
483		-)))
484	484
485		-(((
486	486	LongCheng Street, LongGang District ; Shenzhen 518116,China
487		-)))
488	488
489	489
490		-==== 11. FCC Warning ====
	638	+1. FCC Warning
491	491
492		-(((
493	493	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
494		-)))
495	495
496		-(((
497	497	~-~- Reorient or relocate the receiving antenna.
498		-)))
499	499
500		-(((
501	501	~-~- Increase the separation between the equipment and receiver.
502		-)))
503	503
504		-(((
505	505	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
506		-)))
507	507
508		-(((
509	509	~-~- Consult the dealer or an experienced radio/TV technician for help.
510		-)))
511	511
512		-(((
513		-
514		-)))
515	515
516		-(((
517	517	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
518		-)))
519	519
520		-(((
521		-
522		-)))
523	523
524		-(((
525	525	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
526		-)))