Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.2
edited by Xiaoling
on 2022/05/07 14:26
Change comment: There is no comment for this version
To version 128.1
edited by Xiaoye
on 2022/06/09 15:08
Change comment: Uploaded new attachment "image-20220609150849-1.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,130 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
7 +
8 +
9 9  )))
10 10  
11 +**Table of Contents：**
11 11  
12 -
13 -
14 -
15 15  {{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
16 += **1. Introduction** =
19 19  
20 -===== 1.1 What is HP0D =====
18 +== **1.1 What is HP0D** ==
21 21  
22 22  (((
23 -(((
24 -(((
25 25  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 26  )))
27 -)))
28 -)))
29 29  
30 30  (((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
34 34  )))
35 -)))
36 -)))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
42 42  )))
43 -)))
44 -)))
45 45  
46 46  (((
47 -(((
48 -(((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 -)))
51 -)))
52 -)))
53 -
54 -(((
55 -(((
56 -(((
57 57  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
36 +== **1.2 Specifications** ==
62 62  
63 -===== 1.2 Specifications =====
64 -
65 -(((
66 -(((
67 67  **~ Hardware System:**
68 -)))
69 -)))
70 -
71 -(((
72 -(((
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
41 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 85  **~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
104 104  
105 -(((
106 -(((
107 107  **~ Operating Condition:**
108 -)))
109 -)))
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
126 126  
127 -===== 1.3 Features =====
55 +== **1.3 Features** ==
128 128  
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
... ... @@ -141,610 +141,686 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
145 145  
146 -
147 147  [[image:1651803959860-394.png||height="500" width="375"]]
148 148  
149 149  
150 150  
151 -(((
152 -(((
153 -**~ Label information:**
154 -)))
155 -)))
78 +=== 1.4.1 Label information: ===
156 156  
157 -(((
158 -(((
159 -
160 -)))
161 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
162 162  
88 +
89 += **2. Quick Start & Onboarding** =
90 +
91 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
92 +
93 +
94 +== **2.1  Connect HP0D Web UI** ==
95 +
96 +=== **2.1.1 via HP0D’s Access Point** ===
97 +
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 +
100 +
101 +[[image:1651804327535-321.png||height="325" width="199"]]
102 +
103 +
104 +(% class="box infomessage" %)
163 163  (((
164 -(((
165 -**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
106 + called  : **//HPD-dragino-xxxxxx//**
166 166  )))
167 -)))
168 168  
109 +(% class="box infomessage" %)
169 169  (((
170 -(((
171 -**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
172 172  )))
173 -)))
174 174  
115 +
116 +[[image:1651804397792-591.png||height="386" width="733"]]
117 +
118 +
119 +=== **2.1.2 Connect via HP0D hostname** ===
120 +
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 +
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 +
125 +
126 +[[image:1651804629009-699.png]]
127 +
128 +=== **2.1.3 Connect via Ethernet Port** ===
129 +
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 +
132 +
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 +
135 +
136 +[[image:1651804782523-623.png]]
137 +
138 +
139 +== **2.2 Generate QR Code** ==
140 +
141 +
175 175  (((
176 -(((
177 -**~ Miner animal name**: xxx-xxx-xxx
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
178 178  )))
179 -)))
180 180  
181 181  (((
182 -(((
183 -**~ Miner address**:          112xxxxxx
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
149 +
184 184  )))
185 -)))
186 186  
152 +[[image:image-20220506140312-1.png||height="435" width="438"]]
153 +
154 +
155 +== **2.3 Onboarding Hotspot** ==
156 +
157 +
187 187  (((
188 -(((
189 -**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
190 190  )))
191 -)))
192 192  
193 193  (((
194 -(((
195 -**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
163 +**//Note: the APP version needs to be greater than 3.11.//**
164 +
165 +
196 196  )))
197 -)))
198 198  
199 199  (((
200 -(((
201 -**~ SN**:  device serial number.
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 +
171 +
202 202  )))
203 -)))
204 204  
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
205 205  
206 -==== 2. Quick Start & Onboarding ====
207 207  
177 +//**3. **Scan the QR Code you generated in the previous step.//
178 +
179 +[[image:1651828211026-220.png||height="405" width="191"]]
180 +
181 +
208 208  (((
209 -(((
210 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
183 +//**4. **Onboarding your device//
211 211  )))
212 -)))
213 213  
214 -(% class="wikigeneratedid" id="H-2" %)
215 215  (((
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
188 +
216 216  
217 217  )))
218 218  
219 -===== 2.1  Connect HP0D Web UI =====
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
220 220  
221 -====== 2.1.1 via HP0D’s Access Point. ======
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
222 222  
223 -(((
224 -(((
225 - At the first boot of HP0D, it will auto generate a Wi-Fi network
226 226  
227 -[[image:1651804327535-321.png||height="325" width="199"]]
228 -)))
229 -)))
197 +**5. **//Check onboarding status where you can check from mobile~://
230 230  
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
200 +
201 +
202 +//You can also see the hotspot status in the below link~://
203 +
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
205 +
206 +//Example~://
207 +
208 +
209 +**//Green Synced means hotspot works normally.//**
210 +
211 +[[image:1651828427715-679.png||height="374" width="635"]]
212 +
213 +
214 +== **2.4 Set the Port Forwarding** ==
215 +
216 +
231 231  (((
232 -(((
233 -
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
234 234  )))
235 -)))
236 236  
221 +[[image:1651828514449-658.png]]
222 +
237 237  (((
238 -(((
239 -(% class="box infomessage" %)
240 -(((
241 - called           : **//HPD-dragino-xxxxxx//**
224 +
242 242  )))
243 -)))
244 -)))
245 245  
246 246  (((
247 -(((
248 -(% class="box infomessage" %)
249 -(((
250 - with password:  **//dragino+dragino//**
228 +Note: Please refer to more detailed Settings
251 251  )))
252 -)))
253 -)))
254 254  
255 255  (((
256 -(((
257 -
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
258 258  )))
259 -)))
260 260  
261 261  (((
262 -(((
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
263 263  
264 264  )))
265 -)))
266 266  
267 -(((
268 -(((
269 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
270 -)))
271 -)))
241 += **3. Check the configuration of HP0D** =
272 272  
273 -[[image:1651804397792-591.png||height="402" width="763"]]
243 +== **3.1 LoRa frequency configuration** ==
274 274  
275 275  
246 +[[image:1651828687205-178.png||height="323" width="657"]]
276 276  
277 -====== 2.1.2 Connect via HP0D hostname ======
278 278  
279 -(((
280 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
281 -)))
249 +== **3.2 Check the LoRaWAN Server Address** ==
282 282  
283 -(((
284 - PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
285 -)))
286 286  
287 -(((
288 - Web-UI via HP0D’s hostname.
289 -)))
252 +[[image:image-20220607160428-1.png||height="472" width="654"]]
290 290  
291 291  
292 - Like: __**//http:~/~/dragino-4ba54a//**__
255 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
293 293  
257 +[[image:image-20220607161130-2.png||height="501" width="1112"]]
294 294  
295 -(% style="text-align:center" %)
296 -[[image:1651804629009-699.png]]
259 +[[image:image-20220607161603-3.png||height="557" width="1113"]]
297 297  
261 +[[image:image-20220607161812-4.png||height="699" width="1115"]]
298 298  
299 -====== 2.1.3 Connect via Ethernet Port ======
300 300  
264 +[[image:image-20220607162635-5.png||height="339" width="1110"]]
265 +
266 +[[image:image-20220607162859-6.png]]
267 +
268 +== **3.3 Check Miner configuration** ==
269 +
270 +
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
272 +
301 301  (((
302 -(((
303 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 +
276 +
277 +== **//3.4 Check the Miner state//** ==
278 +
279 +
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 +
282 +
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
284 +
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
289 +
304 304  )))
305 -)))
306 306  
292 += **4. Installation of Antenna** =
293 +
294 +
307 307  (((
308 -(((
309 - router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
296 +//HP0D uses Fiber Glass Antenna.//
310 310  )))
311 -)))
312 312  
299 +[[image:1651832158606-882.png]]
300 +
313 313  (((
314 314  
315 315  )))
316 316  
317 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
305 +(((
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 +)))
318 318  
319 - or SSH access of HP0D.
309 +(((
310 +[[image:1651832205608-998.png||height="349" width="198"]]
320 320  
321 -(% style="text-align:center" %)
322 -[[image:1651804782523-623.png]]
312 +
313 +)))
323 323  
315 += **5. SSH Access for Linux console** =
324 324  
325 325  
326 -===== 2.2 Generate QR Code =====
318 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
327 327  
328 -(((
329 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
330 -)))
320 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
331 331  
332 -(((
333 - Note: After onboarding, this wallet will become owner of this hotspot.
334 -)))
322 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
335 335  
336 -(% style="text-align:center" %)
337 -[[image:image-20220506140312-1.png||height="435" width="438"]]
324 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
338 338  
339 339  
340 -===== 2.3 Onboarding Hotspot =====
327 +Below are screenshots:
341 341  
329 +[[image:image-20220608202027-1.png]]
330 +
342 342  (((
343 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
332 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
344 344  )))
345 345  
346 346  (((
347 - Note: the APP version need to be greater than 3.11.
336 +//Port:  22//
348 348  )))
349 349  
350 350  (((
351 -
340 +//User Name:      (% style="color:green" %)**root**//
352 352  )))
353 353  
354 354  (((
355 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
344 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
345 +
346 +
356 356  )))
357 357  
358 358  (((
359 - the ‘DRAGINO Miner HP0D’
350 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
351 +
352 +
360 360  )))
361 361  
362 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
355 +[[image:image-20220608202118-2.png]]
363 363  
364 - 3. Scan the QR Code you generated in the previous step.
365 365  
366 -(% style="text-align:center" %)
367 -[[image:1651828211026-220.png||height="405" width="191"]]
358 += **6. How to change the Wireless function of HP0D** =
368 368  
369 - 4. Onboarding your device
360 +//The wireless function is configured as AP by default and the web page does not support configuration,//
370 370  
371 - Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
362 +//if you want to configure it as STA(client)connection mode,//
372 372  
373 - mobile to onboarding server might have issue.
364 +//you can configure your WiFi info on the** /Network/WiFi **page.//
374 374  
375 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
376 376  
377 - [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
367 +**//Note: the wireless state is as AP//**
378 378  
369 +[[image:image-20220531170243-5.png||height="469" width="967"]]
379 379  
380 -5. Check onboarding status
381 381  
382 - You can check from mobile:
372 +== **6.1 Access WiFi configuration page** ==
383 383  
384 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
385 385  
386 - You can also see the hotspot status in below link:
375 +[[image:image-20220531165803-2.png]]
387 387  
388 - https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
389 389  
390 - Example:
378 +== **6.2 Enter your WiFi information and save** ==
391 391  
392 - Green Synced means hotspot works normal.
393 393  
394 -(% style="text-align:center" %)
395 -[[image:1651828427715-679.png||height="374" width="635"]]
381 +[[image:image-20220531165958-3.png]]
396 396  
397 397  
398 -===== 2.4 Set the Port Forwarding =====
384 +== **6.3 Change the WiFi mode.** ==
399 399  
400 -(((
401 - Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
402 -)))
403 403  
404 -(((
405 - it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
406 -)))
387 +[[image:image-20220531170131-4.png]]
407 407  
408 -(((
409 - you may have.
410 -)))
389 +== **6.4 Wait system to restart** ==
411 411  
412 -(% style="text-align:center" %)
413 -[[image:1651828514449-658.png]]
414 414  
415 -(((
416 -
417 -)))
392 +[[image:image-20220531170501-7.png]]
418 418  
419 -(((
420 - Note: Please refer to more detailed Settings
421 -)))
422 422  
395 +//**Note: When the time remaining is finished it will turn to the home page.**//
396 +
397 +
398 +== **6.5 Check the STA state** ==
399 +
400 +
401 +[[image:image-20220531170705-8.png||height="484" width="990"]]
402 +
403 +
404 += **7. Trouble Shootings** =
405 +
406 +== **7.1 How to get a wallet address?** ==
407 +
408 +
409 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 +
411 +
412 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 +
414 +
423 423  (((
424 - [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
416 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
425 425  )))
426 426  
427 427  (((
428 - [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
420 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
421 +
422 +
429 429  )))
430 430  
425 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
431 431  
432 -==== 3. Check the configuration of HP0D ====
433 433  
434 -===== 3.1 LoRa frequency configuration =====
428 +[[image:image-20220506182042-2.png||height="250" width="516"]]
435 435  
436 -(% style="text-align:center" %)
437 -[[image:1651828687205-178.png||height="323" width="657"]]
430 +[[image:1651832455372-647.png||height="224" width="520"]]
438 438  
439 439  
433 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
440 440  
441 -===== 3.2 Check the LoRaWAN serveraddress =====
435 +**//It might relate to the network which might be up to 10mins.//**
442 442  
443 443  
444 -(% style="text-align:center" %)
445 -[[image:1651828703680-156.png||height="349" width="672"]]
438 +== **7.4 Onboarding – Bad Gateway** ==
446 446  
447 447  
448 -===== 3.3 Check Miner configuration =====
441 +[[image:1651832583790-633.png]]
449 449  
450 -(% style="text-align:center" %)
451 -[[image:image-20220506181408-1.png||height="451" width="513"]]
452 452  
453 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
444 +//**This is caused by the process leading too long which just needs to refresh the page.**//
454 454  
455 -**~ button of Update, and then wait 10mins to check here,**
456 456  
447 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
457 457  
458 -==== 4. Installation of Antenna ====
459 459  
460 -(((
461 - HP0D use Fiber Glass Antenna.
462 -)))
450 +[[image:image-20220506182424-3.png]]
463 463  
464 -(% style="text-align:center" %)
465 -[[image:1651832158606-882.png]]
466 466  
467 467  (((
454 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 +
468 468  
469 469  )))
470 470  
459 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
460 +
461 +[[image:1651832742262-209.png||height="297" width="365"]]
462 +
463 +
471 471  (((
465 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 +
472 472  
473 473  )))
474 474  
475 -(((
476 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
477 -)))
470 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
478 478  
479 -(((
480 - to antenna and install as below:
481 -)))
482 482  
483 -(((
484 -(% style="text-align:center" %)
485 -[[image:1651832205608-998.png||height="349" width="198"]]
486 -)))
473 +[[image:1651832811038-780.png||height="462" width="216"]]
487 487  
488 -==== 5. SSH Access for Linux console ====
489 489  
490 490  (((
491 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
492 -)))
477 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
493 493  
494 -(((
495 - Port:         22
479 +
496 496  )))
497 497  
498 -(((
499 - User Name:      **root**
500 -)))
482 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
501 501  
502 -(((
503 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
504 -)))
505 505  
506 506  (((
486 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
487 +
507 507  
508 508  )))
509 509  
510 510  (((
511 - After logging in, you will be in the Linux console and can enter commands as shown below.
492 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
512 512  )))
513 513  
514 -(% style="text-align:center" %)
515 -[[image:1651832284160-991.png]]
495 +[[image:1651832880009-473.png]]
516 516  
517 517  
518 -==== **6. How to change the Wireless function of HP0D** ====
498 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
519 519  
520 - // The wireless function is configured as AP by default and the web page does not support configuration, //
521 521  
522 -// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
501 +**//This is caused by the server connection delay, which does not affect the regular use.//**
523 523  
524 -===== **6.1 Access the Linux console.** =====
503 +[[image:1651832959907-357.png]]
525 525  
526 - Follow the previous step of Step 5.
527 527  
506 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
528 528  
529 -===== 6.2 Install the package of network-manager. =====
530 530  
531 - Run commands:
509 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 +* //**Make sure your mobile app’s relevant permission is enabled.**//
512 +* //**Known: The Android 11 version may cause this kind of issue.**//
532 532  
533 -(% class="box infomessage" %)
514 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 +
516 +
534 534  (((
535 - apt update
536 - apt install network-manager
518 +//**Each HP0D is inspected and configured prior to shipping.**//
537 537  )))
538 538  
539 -[[image:image-20220507140730-1.png]]
521 +(((
522 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
540 540  
524 +
525 +)))
541 541  
527 +== **7.12 Can use the frequency to a region where is no support?** ==
542 542  
543 -===== 6.3 Reboot the device. =====
544 544  
545 - Run command:
530 +(((
531 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 +)))
546 546  
547 -(% class="box infomessage" %)
548 548  (((
549 - reboot
535 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
536 +
537 +
550 550  )))
551 551  
552 -[[image:image-20220507140814-2.png]]
540 +== **7.13 Can change the frequency of the HP0D Miner?** ==
553 553  
554 -===== 6.4 Check the wireless type =====
555 555  
556 - Run command:
543 +//We do not recommend doing this, it may damage your device//
557 557  
558 -(% class="box infomessage" %)
559 -(((
560 - iw dev
561 -)))
562 562  
563 -[[image:image-20220507140941-3.png]]
546 +== **7.14 Low Reward and not transmit issue** ==
564 564  
565 -===== 6.5 Connect the WiFi. =====
566 566  
567 - Run command:
549 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
568 568  
569 -(% class="box infomessage" %)
570 -(((
571 - nmtui
572 -)))
551 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
573 573  
574 -[[image:image-20220507140953-4.png]]
553 +[[image:image-20220527114519-1.png||height="579" width="851"]]
575 575  
576 576  
556 +== **7.15 Why is my miner version not the latest** ==
577 577  
578 -==== 7. Trouble Shootings ====
579 579  
580 -===== 7.1 How to get a wallet address? =====
559 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
581 581  
582 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
561 +//However, the download and upgrade may fail due to the network.//
583 583  
563 +//So **We offer a manual check method:**//
584 584  
585 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
565 + **// Use the "draginoups" command to check//**
586 586  
587 -(((
588 - User can login the HP0D, able to access other Web Pages except miner page
589 -)))
567 +[[image:image-20220601101358-1.png]]
590 590  
591 -(((
592 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
593 -)))
594 594  
595 595  
596 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
571 += **8. How to reset the hotspot OS to the factory settings** =
597 597  
598 -(% style="text-align:center" %)
599 -[[image:image-20220506182042-2.png||height="250" width="516"]]
573 +The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
600 600  
601 -(% style="text-align:center" %)
602 -[[image:1651832455372-647.png||height="224" width="520"]]
575 +So you have to re-flash the image into the SD card.
603 603  
604 604  
605 - HP0D is establish connection to Helium server and not finished. And you might see above.
578 +//**Preparations:**//
606 606  
607 - It might relate to the network where might up to 10mins
580 +1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
608 608  
582 +2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
609 609  
610 -===== 7.4 Onboarding – Bad Gaterway =====
584 +3. //A card reader device//
611 611  
612 -(% style="text-align:center" %)
613 -[[image:1651832583790-633.png]]
586 +4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
614 614  
615 - This is caused by the process leads too long which just need to refresh the page.
588 +5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
616 616  
590 +=== ===
617 617  
618 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
592 +=== **Step 1.  Formatting the SD Card** ===
619 619  
620 -(% style="text-align:center" %)
621 -[[image:image-20220506182424-3.png]]
622 622  
623 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
595 +[[image:image-20220609111027-9.png]]
624 624  
625 - device block height is much lower than the current height as the above picture like '1 1', the QR code
626 626  
627 - generation may fail.
598 +=== **Step 2. Select the OS image ** ===
628 628  
629 629  
630 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
601 +[[image:image-20220609104907-8.png]]
631 631  
632 -(% style="text-align:center" %)
633 -[[image:1651832742262-209.png||height="297" width="365"]]
634 634  
635 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
604 +=== **Step 3. Select the target ** ===
636 636  
637 - click the button of ‘Clean’ to re-generate the QR Code.
638 638  
607 +[[image:image-20220609104637-2.png]]
639 639  
640 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
609 +[[image:image-20220609104701-3.png]]
641 641  
642 -(% style="text-align:center" %)
643 -[[image:1651832811038-780.png||height="462" width="216"]]
644 644  
645 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
612 +=== **Step 4. Flash start** ===
646 646  
647 - please contact us to help you solve.
648 648  
615 +[[image:image-20220609104727-4.png]]
649 649  
650 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
617 +[[image:image-20220609104741-5.png]]
651 651  
652 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
653 653  
654 - public key/ wallet address to onboarding server. Server will return the match MAC address
620 +=== **Flash Complete** ===
655 655  
656 - for this hotspot.
657 657  
623 +[[image:image-20220609104415-1.png]]
658 658  
659 - If you don’t see MAC address, make sure your mobile has good internet connection.
660 660  
661 -(% style="text-align:center" %)
662 -[[image:1651832880009-473.png]]
626 +== **Step 4. Re-install the SD card into the hotspot and boot it** ==
663 663  
664 664  
665 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
629 +== **Step 5. Configure the correct region for the miner** ==
666 666  
667 - This is caused by the server connection delay, which does not affect the normal use.
631 +**by the default, the factory settings apply to the US915.**
668 668  
633 +**if your region is not the US915, you have to configure the correct region for the miner.**
669 669  
670 -(% style="text-align:center" %)
671 -[[image:1651832959907-357.png]]
672 672  
673 -===== 7.10 Mobile APP crash after scan the QR Code? =====
636 +**Access the hotspot CLI, and run these Linux commands**
674 674  
675 -* Make sure you have input the correct Wallet address to generate QR Code.
676 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
677 -* Make sure your mobile app’s relevant permission are enabled.
678 -* Known: The Android 11 version may cause this kind of issue.
679 679  
680 -1.
681 -11. Why the frequency/region is not the same what I purchased?
639 +~#~##update the software of dragino
682 682  
683 -//Each HP0D is inspected and configured prior to shipping.//
641 +apt update
684 684  
685 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
643 +apt install dragino*
686 686  
645 +[[image:image-20220609150452-2.png||height="348" width="909"]]
687 687  
688 -1.
689 -11. Can use the frequency to a region where is not support?
690 690  
691 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
692 692  
693 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
649 +~#~##configure the correct region for the miner and update it
694 694  
651 +uci set miner.general.region=<Region; Such as AS923-1/AU915/US915/EU868/IN865>
695 695  
696 -1.
697 -11. Can change the frequency of the HP0D Miner?
653 +uci commit miner
698 698  
699 -//We do not recommend doing this, it may damage your device//
655 +minerup update
700 700  
701 701  
702 702  
659 +~#~##check the miner version
703 703  
661 +draginoups
704 704  
705 -1. Supports
706 706  
707 -//If you are experiencing issues and can’t solve, you can send mail to//
664 += **9. OTA Version Info** =
708 708  
709 -[[//support@dragino.com//>>mailto:support@dragino.com]]
666 +== **When does the OTA update happen?** ==
710 710  
711 -//With your question as detail as possible. We will reply and help you in the shortest.//
712 712  
669 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
713 713  
671 +== **# 2022/05/14** ==
714 714  
715 715  
716 -1. Order Info
674 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
675 +1. //Add postinst after auto-update//
676 +1. //Add Miner version mark.//
677 +1. //Add fast sync if miner GAP is large//
717 717  
718 -**HP0D-XXX**
679 +== **# 2022/05/24** ==
719 719  
720 -**XXX**: Frequency Band
681 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
721 721  
722 -* 868: For Bands: EU868,IN865
723 -* 915: For Bands: US915,AU915,AS923,KR920
724 724  
725 -1. Manufacturer Info
684 += **10. Supports** =
726 726  
686 +(((
687 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
688 +)))
689 +
690 +(((
691 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
692 +
693 +
694 +)))
695 +
696 += **11. Order Info** =
697 +
698 +(% style="color:#0000ff" %)**HP0D-XXX**
699 +
700 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
701 +
702 +* **AS923**: LoRaWAN AS923 band
703 +* **AU915**: LoRaWAN AU915 band
704 +* **EU868**: LoRaWAN EU868 band
705 +* **KR920**: LoRaWAN KR920 band
706 +* **US915**: LoRaWAN US915 band
707 +* **IN865**: LoRaWAN IN865 band
708 +
709 += **12. Manufacturer Info** =
710 +
711 +(((
727 727  **Shenzhen Dragino Technology Development co. LTD**
713 +)))
728 728  
715 +(((
729 729  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
717 +)))
730 730  
731 -LongCheng Street, LongGang District ; Shenzhen 518116,China
719 +(((
720 +Longcheng Street, LongGang District; Shenzhen 518116, China
732 732  
733 733  
734 -1. FCC Warning
723 +
724 +)))
735 735  
726 += **13. FCC Warning** =
727 +
728 +(((
736 736  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
730 +)))
737 737  
732 +(((
738 738  ~-~- Reorient or relocate the receiving antenna.
734 +)))
739 739  
736 +(((
740 740  ~-~- Increase the separation between the equipment and receiver.
738 +)))
741 741  
740 +(((
742 742  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
742 +)))
743 743  
744 +(((
744 744  ~-~- Consult the dealer or an experienced radio/TV technician for help.
746 +)))
745 745  
746 -
748 +(((
747 747  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
750 +)))
748 748  
749 -
752 +(((
750 750  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
754 +)))
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
image-20220609104637-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20220609104701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.8 KB
Content
image-20220609104727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +18.2 KB
Content
image-20220609104741-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.7 KB
Content
image-20220609104805-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104813-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104907-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.4 KB
Content
image-20220609111027-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.2 KB
Content
image-20220609141625-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
image-20220609150452-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220609150849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +4.3 KB
Content