Changes for page HP0D -- Full Hotspot for Helium User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -11,6 +11,7 @@
11	11
12	12
13	13
	14	+
14	14	{{toc/}}
15	15
16	16
...	...	@@ -19,40 +19,109 @@
19	19	===== 1.1 What is HP0D =====
20	20
21	21	(((
	23	+(((
	24	+(((
22	22	The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23	23	)))
	27	+)))
	28	+)))
24	24
25	25	(((
26		-HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
	31	+(((
	32	+(((
	33	+HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
27	27	)))
	35	+)))
	36	+)))
28	28
29	29	(((
	39	+(((
	40	+(((
	41	+HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
	42	+)))
	43	+)))
	44	+)))
	45	+
	46	+(((
	47	+(((
	48	+(((
30	30	**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31	31	)))
	51	+)))
	52	+)))
32	32
33	33	(((
	55	+(((
	56	+(((
34	34	HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35	35	)))
	59	+)))
	60	+)))
36	36
37	37
38	38	===== 1.2 Specifications =====
39	39
	65	+(((
	66	+(((
40	40	**~ Hardware System:**
	68	+)))
	69	+)))
	70	+
	71	+(((
	72	+(((
41	41	Linux Part:
	74	+)))
	75	+)))
42	42
43		-* Raspberry Pi 4
	77	+* (((
	78	+(((
	79	+Raspberry Pi 4
	80	+)))
	81	+)))
44	44
	83	+(((
	84	+(((
45	45	**~ Interface:**
	86	+)))
	87	+)))
46	46
47		-* 10M/100M RJ45 Ports x 1
48		-* LoRaWAN Wireless
49		-* Power Input: 12V 2A, DC
	89	+* (((
	90	+(((
	91	+10M/100M RJ45 Ports x 1
	92	+)))
	93	+)))
	94	+* (((
	95	+(((
	96	+LoRaWAN Wireless
	97	+)))
	98	+)))
	99	+* (((
	100	+(((
	101	+Power Input: 12V 2A, DC
	102	+)))
	103	+)))
50	50
	105	+(((
	106	+(((
51	51	**~ Operating Condition:**
	108	+)))
	109	+)))
52	52
53		-* Work Temperature: -20 ~~ 65°C
54		-* Storage Temperature: -20 ~~ 65°C
55		-* Power Input: 12V 2A, DC
	111	+* (((
	112	+(((
	113	+Work Temperature: -20 ~~ 65°C
	114	+)))
	115	+)))
	116	+* (((
	117	+(((
	118	+Storage Temperature: -20 ~~ 65°C
	119	+)))
	120	+)))
	121	+* (((
	122	+(((
	123	+Power Input: 12V 2A, DC
	124	+)))
	125	+)))
56	56
57	57	===== 1.3 Features =====
58	58
...	...	@@ -73,42 +73,122 @@
73	73
74	74	===== 1.4 Label info and login name =====
75	75
	146	+
76	76	[[image:1651803959860-394.png||height="500" width="375"]]
	148	+
	149	+(((
	150	+(((
77	77	**Label information:**
78		-**Device host name:**    (% class="mark" %)dragino-xxxxxx
79		-**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
80		-**Miner animal name**: xxx-xxx-xxx
81		-**Miner address**:       112xxxxxx
	152	+)))
	153	+)))
	154	+
	155	+(((
	156	+(((
	157	+**Device host name:**      (% class="mark" %)dragino-xxxxxx
	158	+)))
	159	+)))
	160	+
	161	+(((
	162	+(((
	163	+**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
	164	+)))
	165	+)))
	166	+
	167	+(((
	168	+(((
	169	+**Miner animal name**: xxx-xxx-xxx
	170	+)))
	171	+)))
	172	+
	173	+(((
	174	+(((
	175	+**Miner address**:          112xxxxxx
	176	+)))
	177	+)))
	178	+
	179	+(((
	180	+(((
82	82	**Eth MAC address**: A8: 40: 41: EF: FE: CD
83		-**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
84		-**SN**:  device serial number.
	182	+)))
	183	+)))
85	85
	185	+(((
	186	+(((
	187	+**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
	188	+)))
	189	+)))
	190	+
	191	+(((
	192	+(((
	193	+**SN**:  device serial number.
	194	+)))
	195	+)))
	196	+
	197	+
86	86	==== 2. Quick Start & Onboarding ====
87	87
	200	+(((
	201	+(((
88	88	The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
	203	+)))
	204	+)))
89	89
	206	+(% class="wikigeneratedid" id="H-2" %)
	207	+(((
	208	+
	209	+)))
90	90
91	91	===== 2.1  Connect HP0D Web UI =====
92	92
93	93	====== 2.1.1 via HP0D’s Access Point. ======
94	94
95		-At the first boot of HP0D, it will auto generate a Wi-Fi network
	215	+(((
	216	+(((
	217	+ At the first boot of HP0D, it will auto generate a Wi-Fi network
96	96
97	97	[[image:1651804327535-321.png||height="325" width="199"]]
	220	+)))
	221	+)))
98	98
	223	+(((
	224	+(((
	225	+
	226	+)))
	227	+)))
	228	+
	229	+(((
	230	+(((
99	99	(% class="box infomessage" %)
100		- called           : **//HPD-dragino-xxxxxx//**
	232	+(((
	233	+ called           : **//HPD-dragino-xxxxxx//**
	234	+)))
	235	+)))
	236	+)))
101	101
	238	+(((
	239	+(((
102	102	(% class="box infomessage" %)
103		- with password:  **//dragino+dragino//**
104		-You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
	241	+(((
	242	+ with password:  **//dragino+dragino//**
	243	+)))
	244	+)))
	245	+)))
105	105
	247	+(((
	248	+(((
	249	+ You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
	250	+)))
	251	+)))
	252	+
106	106	[[image:1651804397792-591.png||height="402" width="763"]]
107	107
108	108
	256	+
109	109	====== 2.1.2 Connect via HP0D hostname ======
110	110
	259	+(((
111	111	Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
	261	+)))
112	112
113	113	Like: __**//http:~/~/dragino-4ba54a//**__
114	114
...	...	@@ -117,8 +117,16 @@
117	117
118	118	====== 2.1.3 Connect via Ethernet Port ======
119	119
	270	+(((
	271	+(((
120	120	Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
	273	+)))
	274	+)))
	275	+
	276	+(((
121	121	If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
	278	+)))
	279	+
122	122	[[image:1651804782523-623.png]]
123	123
124	124
...	...	@@ -151,7 +151,7 @@
151	151	2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
152	152	)))
153	153
154		- [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
	312	+ [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
155	155
156	156
157	157	3. Scan the QR Code you generated in the previous step.
...	...	@@ -159,24 +159,16 @@
159	159	[[image:1651828211026-220.png||height="405" width="191"]]
160	160
161	161
162		-(((
163	163	4. Onboarding your device
164		-)))
165	165
166		-(((
167		-Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
168		-)))
	322	+Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]] [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
169	169
170		-[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
171	171
172		- [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
173		-
174		-
175	175	5. Check onboarding status
176	176
177	177	You can check from mobile:
178	178
179		- [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
	329	+ [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
180	180
181	181	You can also see the hotspot status in below link:
182	182
...	...	@@ -230,9 +230,7 @@
230	230
231	231	[[image:image-20220506181408-1.png||height="451" width="513"]]
232	232
233		-(((
234		-**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
235		-)))
	383	+**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
236	236
237	237
238	238	==== 4. Installation of Antenna ====
...	...	@@ -295,8 +295,8 @@
295	295
296	296	(% class="box infomessage" %)
297	297	(((
298		- apt update
299		- apt install network-manager
	446	+ apt update
	447	+ apt install network-manager
300	300	)))
301	301
302	302	[[image:image-20220507140730-1.png]]
...	...	@@ -308,7 +308,7 @@
308	308
309	309	(% class="box infomessage" %)
310	310	(((
311		- reboot
	459	+ reboot
312	312	)))
313	313
314	314	[[image:image-20220507140814-2.png]]
...	...	@@ -319,7 +319,7 @@
319	319
320	320	(% class="box infomessage" %)
321	321	(((
322		- iw dev
	470	+ iw dev
323	323	)))
324	324
325	325	[[image:image-20220507140941-3.png]]
...	...	@@ -330,7 +330,7 @@
330	330
331	331	(% class="box infomessage" %)
332	332	(((
333		- nmtui
	481	+ nmtui
334	334	)))
335	335
336	336	[[image:image-20220507140953-4.png]]
...	...	@@ -360,65 +360,72 @@
360	360
361	361	[[image:1651832455372-647.png||height="224" width="520"]]
362	362
363		-HP0D is establish connection to Helium server and not finished. And you might see above.
	511	+HP0D is establish connection to Helium server and not finished. And you might see above.It might relate to the network where might up to 10mins.
364	364
365		-It might relate to the network where might up to 10mins.
366	366
367		-
368	368	===== 7.4 Onboarding – Bad Gaterway =====
369	369
	516	+(% style="text-align:center" %)
370	370	[[image:1651832583790-633.png]]
371	371
372		-This is caused by the process leads too long which just need to refresh the page.
	519	+ This is caused by the process leads too long which just need to refresh the page.
373	373
374	374
375	375	7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
376	376
	524	+(% style="text-align:center" %)
377	377	[[image:image-20220506182424-3.png]]
378	378
379		-(((
380		-This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
381		-)))
	527	+ This may be related to the current block height, if the device is synchronizing to the latest height or if the
382	382
	529	+ device block height is much lower than the current height as the above picture like '1 1', the QR code
383	383
	531	+ generation may fail.
	532	+
	533	+
384	384	===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
385	385
	536	+(% style="text-align:center" %)
386	386	[[image:1651832742262-209.png||height="297" width="365"]]
387	387
388		-(((
389		-Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
390		-)))
	539	+ Please ensure that you enter the correct wallet address and that your network is up and running, the user can
391	391
	541	+ click the button of ‘Clean’ to re-generate the QR Code.
392	392
	543	+
393	393	===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
394	394
	546	+(% style="text-align:center" %)
395	395	[[image:1651832811038-780.png||height="462" width="216"]]
396	396
397		-(((
398		-If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
399		-)))
	549	+ If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
400	400
	551	+ please contact us to help you solve.
401	401
	553	+
402	402	===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
403	403
404		-(((
405		-After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
406		-)))
	556	+// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
407	407
408		-(((
409		-If you don’t see MAC address, make sure your mobile has good internet connection.
410		-)))
	558	+ public key/ wallet address to onboarding server. Server will return the match MAC address
411	411
	560	+ for this hotspot.
	561	+
	562	+
	563	+ If you don’t see MAC address, make sure your mobile has good internet connection.
	564	+
	565	+(% style="text-align:center" %)
412	412	[[image:1651832880009-473.png]]
413	413
414	414
415	415	===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
416	416
417		-This is caused by the server connection delay, which does not affect the normal use.
	571	+ This is caused by the server connection delay, which does not affect the normal use.
418	418
	573	+
	574	+(% style="text-align:center" %)
419	419	[[image:1651832959907-357.png]]
420	420
421		-
422	422	===== 7.10 Mobile APP crash after scan the QR Code? =====
423	423
424	424	* Make sure you have input the correct Wallet address to generate QR Code.
...	...	@@ -426,46 +426,44 @@
426	426	* Make sure your mobile app’s relevant permission are enabled.
427	427	* Known: The Android 11 version may cause this kind of issue.
428	428
429		-===== 7.11 Why the frequency/region is not the same what I purchased? =====
	584	+1.
	585	+11. Why the frequency/region is not the same what I purchased?
430	430
431		-(((
432		-Each HP0D is inspected and configured prior to shipping.
433		-)))
	587	+//Each HP0D is inspected and configured prior to shipping.//
434	434
435		-(((
436		-If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
437		-)))
	589	+//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
438	438
439	439
440		-===== 7.12 Can use the frequency to a region where is not support? =====
	592	+1.
	593	+11. Can use the frequency to a region where is not support?
441	441
442		-(((
443		-Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
444		-)))
	595	+//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
445	445
446		-(((
447	447	[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
448		-)))
449	449
450	450
451		-===== 7.13 Can change the frequency of the HP0D Miner? =====
	600	+1.
	601	+11. Can change the frequency of the HP0D Miner?
452	452
453		-We do not recommend doing this, it may damage your device
	603	+//We do not recommend doing this, it may damage your device//
454	454
455	455
456		-==== 8. Supports ====
457	457
458		-(((
459		-If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
460		-)))
461	461
462		-(((
463		-With your question as detail as possible. We will reply and help you in the shortest.
464		-)))
465	465
	609	+1. Supports
466	466
467		-==== 9. Order Info ====
	611	+//If you are experiencing issues and can’t solve, you can send mail to//
468	468
	613	+[[//support@dragino.com//>>mailto:support@dragino.com]]
	614	+
	615	+//With your question as detail as possible. We will reply and help you in the shortest.//
	616	+
	617	+
	618	+
	619	+
	620	+1. Order Info
	621	+
469	469	**HP0D-XXX**
470	470
471	471	**XXX**: Frequency Band
...	...	@@ -473,55 +473,29 @@
473	473	* 868: For Bands: EU868,IN865
474	474	* 915: For Bands: US915,AU915,AS923,KR920
475	475
476		-==== 10. Manufacturer Info ====
	629	+1. Manufacturer Info
477	477
478		-(((
479	479	**Shenzhen Dragino Technology Development co. LTD**
480		-)))
481	481
482		-(((
483	483	Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
484		-)))
485	485
486		-(((
487	487	LongCheng Street, LongGang District ; Shenzhen 518116,China
488		-)))
489	489
490	490
491		-==== 11. FCC Warning ====
	638	+1. FCC Warning
492	492
493		-(((
494	494	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
495		-)))
496	496
497		-(((
498	498	~-~- Reorient or relocate the receiving antenna.
499		-)))
500	500
501		-(((
502	502	~-~- Increase the separation between the equipment and receiver.
503		-)))
504	504
505		-(((
506	506	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
507		-)))
508	508
509		-(((
510	510	~-~- Consult the dealer or an experienced radio/TV technician for help.
511		-)))
512	512
513		-(((
514		-
515		-)))
516	516
517		-(((
518	518	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
519		-)))
520	520
521		-(((
522		-
523		-)))
524	524
525		-(((
526	526	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
527		-)))