Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.18
edited by Xiaoling
on 2022/05/07 17:40
Change comment: There is no comment for this version
To version 31.1
edited by Xiaoling
on 2022/05/06 17:13
Change comment: Uploaded new attachment "1651828427715-679.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -11,6 +11,7 @@
11 11  
12 12  
13 13  
14 +
14 14  {{toc/}}
15 15  
16 16  
... ... @@ -19,52 +19,99 @@
19 19  ===== 1.1 What is HP0D =====
20 20  
21 21  (((
22 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, optional 3G or 4G.
23 23  )))
24 24  
25 25  (((
27 + The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
28 +)))
29 +
30 +(((
26 26  
27 27  )))
28 28  
29 29  (((
30 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
35 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip.
31 31  )))
32 32  
33 33  (((
39 + It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is
40 +)))
41 +
42 +(((
43 + fully compatible with LoRaWAN protocol. HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
44 +)))
45 +
46 +(((
47 +**~ and connects max 2 x LoRaWAN servers at the same time**.
48 +)))
49 +
50 +(((
34 34  
35 35  )))
36 36  
37 37  (((
38 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
55 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to
39 39  )))
40 40  
41 41  (((
59 + input HNT wallet address and use QR  Code to onboarding HP0D when it arrives.
60 +)))
61 +
62 +(((
42 42  
43 43  )))
44 44  
45 45  (((
46 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
67 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to
47 47  )))
48 48  
70 +(((
71 + use in their own LoRaWAN network.
72 +)))
49 49  
74 +
50 50  ===== 1.2 Specifications =====
51 51  
77 +(((
52 52  **~ Hardware System:**
79 +)))
80 +
81 +(((
53 53   Linux Part:
83 +)))
54 54  
55 -* Raspberry Pi 4
85 +* (((
86 +Raspberry Pi 4
87 +)))
56 56  
89 +(((
57 57  **~ Interface:**
91 +)))
58 58  
59 -* 10M/100M RJ45 Ports x 1
60 -* LoRaWAN Wireless
61 -* Power Input: 12V 2A, DC
93 +* (((
94 +10M/100M RJ45 Ports x 1
95 +)))
96 +* (((
97 +LoRaWAN Wireless
98 +)))
99 +* (((
100 +Power Input: 12V 2A, DC
101 +)))
62 62  
103 +(((
63 63  **~ Operating Condition:**
105 +)))
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
67 -* Power Input: 12V 2A, DC
107 +* (((
108 +Work Temperature: -20 ~~ 65°C
109 +)))
110 +* (((
111 +Storage Temperature: -20 ~~ 65°C
112 +)))
113 +* (((
114 +Power Input: 12V 2A, DC
115 +)))
68 68  
69 69  ===== 1.3 Features =====
70 70  
... ... @@ -85,394 +85,374 @@
85 85  
86 86  ===== 1.4 Label info and login name =====
87 87  
88 -[[image:1651803959860-394.png||height="500" width="375"]]
89 -**Label information:**
90 -**Device host name:**    (% class="mark" %)dragino-xxxxxx
91 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
92 -**Miner animal name**: xxx-xxx-xxx
93 -**Miner address**:       112xxxxxx
94 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
95 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
96 -**SN**:  device serial number.
97 97  
137 +(% style="text-align:center" %)
138 +[[image:1651803959860-394.png||height="653" width="490"]]
139 +
140 +
141 +
142 +(((
143 +**~ Label information:**
144 +)))
145 +
146 +(((
147 +
148 +)))
149 +
150 +(((
151 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
152 +)))
153 +
154 +(((
155 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
156 +)))
157 +
158 +(((
159 +**~ Miner animal name**: xxx-xxx-xxx
160 +)))
161 +
162 +(((
163 +**~ Miner address**:          112xxxxxx
164 +)))
165 +
166 +(((
167 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
168 +)))
169 +
170 +(((
171 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
172 +)))
173 +
174 +(((
175 +**~ SN**:  device serial number.
176 +)))
177 +
178 +
98 98  ==== 2. Quick Start & Onboarding ====
99 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
100 100  
181 +(((
182 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
183 +)))
184 +
101 101  (% class="wikigeneratedid" id="H-2" %)
186 +(((
187 +
188 +)))
102 102  
103 103  ===== 2.1  Connect HP0D Web UI =====
104 104  
105 105  ====== 2.1.1 via HP0D’s Access Point. ======
106 -At the first boot of HP0D, it will auto generate a Wi-Fi network
107 107  
108 -[[image:1651804327535-321.png||height="325" width="199"]]
109 -(% class="box infomessage" %)
110 - called           : **//HPD-dragino-xxxxxx//**
111 -(% class="box infomessage" %)
112 - with password:  **//dragino+dragino//**
113 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
194 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
114 114  
115 -[[image:1651804397792-591.png||height="402" width="763"]]
116 116  
197 + called           : **//HPD-dragino-xxxxxx//**
117 117  
199 + with password:  **//dragino+dragino//**
200 +
201 +
202 +
203 + You can use a PC to connect to this Wi-Fi network. The PC will
204 +
205 + get an IP address 10.130.1.xxx and the HP0D has the default
206 +
207 + IP 10.130.1.1
208 +
209 +
210 +
211 +(% style="text-align:center" %)
212 +[[image:1651804397792-591.png]]
213 +
214 +
215 +
118 118  ====== 2.1.2 Connect via HP0D hostname ======
119 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
120 120  
121 -Like: __**//http:~/~/dragino-4ba54a//**__
218 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
122 122  
220 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
221 +
222 + Web-UI via HP0D’s hostname.
223 +
224 +
225 + Like: __**//http:~/~/dragino-4ba54a//**__
226 +
227 +
228 +(% style="text-align:center" %)
123 123  [[image:1651804629009-699.png]]
124 124  
125 125  
126 126  ====== 2.1.3 Connect via Ethernet Port ======
127 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
128 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
233 +
234 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP  address the router has assigned to the HP0D.
235 +
236 +
237 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
238 +
239 +(% style="text-align:center" %)
129 129  [[image:1651804782523-623.png]]
130 130  
131 131  
243 +
132 132  ===== 2.2 Generate QR Code =====
133 133  
134 -(((
135 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
136 -)))
246 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
137 137  
138 -(((
139 -Note: After onboarding, this wallet will become owner of this hotspot.
140 -)))
248 + Note: After onboarding, this wallet will become owner of this hotspot.
141 141  
142 -[[image:image-20220506140312-1.png||height="435" width="438"]]
250 +(% style="text-align:center" %)
251 +[[image:image-20220506140312-1.png]]
143 143  
144 144  
254 +
145 145  ===== 2.3 Onboarding Hotspot =====
146 146  
147 -(((
148 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
149 -)))
257 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
150 150  
151 -(((
152 -Note: the APP version need to be greater than 3.11.
259 + Note: the APP version need to be greater than 3.11.
153 153  
154 -
155 -)))
261 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
156 156  
157 -(((
158 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
159 -)))
263 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
160 160  
161 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
265 + 3. Scan the QR Code you generated in the previous step.
162 162  
163 163  
164 -3. Scan the QR Code you generated in the previous step.
268 + 4. Onboarding your device
165 165  
166 -[[image:1651828211026-220.png||height="405" width="191"]]
270 +Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
167 167  
272 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
168 168  
169 -(((
170 -4. Onboarding your device
171 -)))
172 172  
173 -(((
174 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  
175 -)))
176 176  
177 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
178 178  
179 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
180 180  
181 181  
182 -5. Check onboarding status
279 +1. Check onboarding status
183 183  
184 184  You can check from mobile:
185 185  
186 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
283 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
187 187  
188 188  You can also see the hotspot status in below link:
189 189  
190 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
287 +https:~/~/explorer.helium.com/hotspots/**//<YOUR_HOTSPORT_KEY>//**
191 191  
192 192  Example:
193 193  
194 194  Green Synced means hotspot works normal.
195 195  
196 -[[image:1651828427715-679.png||height="374" width="635"]]
293 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
197 197  
198 198  
199 -===== 2.4 Set the Port Forwarding =====
200 200  
201 -(((
202 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
203 -)))
204 204  
205 -[[image:1651828514449-658.png]]
206 206  
207 -(((
208 -
209 -)))
299 +1.
300 +11. Set the Port Forwarding
210 210  
211 -(((
302 +Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
303 +
304 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
305 +
306 +
212 212  Note: Please refer to more detailed Settings
213 -)))
214 214  
215 -(((
216 216  [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
217 -)))
218 218  
219 -(((
220 220  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
221 -)))
222 222  
223 223  
224 -==== 3. Check the configuration of HP0D ====
225 225  
226 -===== 3.1 LoRa frequency configuration =====
227 227  
228 -[[image:1651828687205-178.png||height="323" width="657"]]
229 229  
317 +1. Check the configuration of HP0D
318 +11. LoRa frequency configuration
230 230  
231 -===== 3.2 Check the LoRaWAN serveraddress =====
320 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
232 232  
233 -[[image:1651828703680-156.png||height="349" width="672"]]
322 +1.
323 +11. Check the LoRaWAN serveraddress.
234 234  
325 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
235 235  
236 -===== 3.3 Check Miner configuration =====
237 237  
238 -[[image:image-20220506181408-1.png||height="451" width="513"]]
239 239  
240 -(((
241 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
242 -)))
243 243  
244 244  
245 -==== 4. Installation of Antenna ====
246 246  
247 -(((
248 -HP0D use Fiber Glass Antenna.
249 -)))
250 250  
251 -[[image:1651832158606-882.png]]
252 252  
253 -(((
254 -
255 -)))
256 256  
257 -(((
258 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
259 -)))
335 +1.
336 +11. Check Miner configuration
260 260  
261 -(((
262 -[[image:1651832205608-998.png||height="349" width="198"]]
263 -)))
338 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
264 264  
265 -==== 5. SSH Access for Linux console ====
340 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
266 266  
267 -(((
268 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
269 -)))
270 270  
271 -(((
272 -Port:         22
273 -)))
274 274  
275 -(((
276 -User Name:      **root**
277 -)))
278 278  
279 -(((
280 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
281 -)))
282 282  
283 -(((
284 -After logging in, you will be in the Linux console and can enter commands as shown below.
285 -)))
346 +1. Installation of Antenna
286 286  
287 -[[image:1651832284160-991.png]]
348 +HP0D use Fiber Glass Antenna.
288 288  
350 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
289 289  
290 -==== **6. How to change the Wireless function of HP0D** ====
352 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
291 291  
292 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
293 293  
294 -===== **6.1 Access the Linux console.** =====
355 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
295 295  
296 -Follow the previous step of Step 5.
297 297  
298 298  
299 -===== 6.2 Install the package of network-manager. =====
300 300  
301 -Run commands:
302 302  
303 -(% class="box infomessage" %)
304 -(((
305 - apt update
306 - apt install network-manager
307 -)))
361 +1. SSH Access for Linux console
308 308  
309 -[[image:image-20220507140730-1.png]]
363 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
310 310  
365 +Port:         22
311 311  
312 -===== 6.3 Reboot the device. =====
367 +User Name:      **root**
313 313  
314 -Run command:
369 +Password:         **Randomly generated （found on device’s label ）**
315 315  
316 -(% class="box infomessage" %)
317 -(((
318 - reboot
319 -)))
320 320  
321 -[[image:image-20220507140814-2.png]]
372 +After logging in, you will be in the Linux console and can enter commands as shown below.
322 322  
323 -===== 6.4 Check the wireless type =====
374 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
324 324  
325 -Run command:
326 326  
327 -(% class="box infomessage" %)
328 -(((
329 - iw dev
330 -)))
331 331  
332 -[[image:image-20220507140941-3.png]]
333 333  
334 -===== 6.5 Connect the WiFi. =====
379 +1. Trouble Shootings
380 +11. How to get a wallet address?
335 335  
336 -Run command:
382 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
337 337  
338 -(% class="box infomessage" %)
339 -(((
340 - nmtui
341 -)))
342 342  
343 -[[image:image-20220507140953-4.png]]
385 +1.
386 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
344 344  
388 +//User can login the HP0D, able to access other Web Pages except miner page//
345 345  
346 -==== 7. Trouble Shootings ====
347 347  
348 -===== 7.1 How to get a wallet address? =====
391 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
349 349  
350 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
351 351  
394 +1.
395 +11. Onboarding ~-~- Some parameters in miner page show timeout
352 352  
353 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
397 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
354 354  
355 -(((
356 -User can login the HP0D, able to access other Web Pages except miner page.
357 -)))
399 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
358 358  
359 -(((
360 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
361 -)))
401 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
362 362  
403 +//It might relate to the network where might up to 10mins//
363 363  
364 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
365 365  
366 -[[image:image-20220506182042-2.png||height="250" width="516"]]
406 +1.
407 +11. Onboarding – Bad Gaterway
367 367  
368 -[[image:1651832455372-647.png||height="224" width="520"]]
409 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
369 369  
370 -HP0D is establish connection to Helium server and not finished. And you might see above.
411 +//This is caused by the process leads too long which just need to refresh the page.//
371 371  
372 -It might relate to the network where might up to 10mins.
373 373  
414 +1.
415 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
374 374  
375 -===== 7.4 Onboarding – Bad Gaterway =====
417 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
376 376  
377 -[[image:1651832583790-633.png]]
419 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
378 378  
379 -This is caused by the process leads too long which just need to refresh the page.
380 380  
422 +1.
423 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
381 381  
382 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
425 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
383 383  
384 -[[image:image-20220506182424-3.png]]
427 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
385 385  
386 -(((
387 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
388 -)))
389 389  
430 +1.
431 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
390 390  
391 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
433 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
392 392  
393 -[[image:1651832742262-209.png||height="297" width="365"]]
435 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
394 394  
395 -(((
396 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
397 -)))
398 398  
438 +1.
439 +11. Onboarding – MAC address is being refreshed after scan QR Code
399 399  
400 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
441 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
401 401  
402 -[[image:1651832811038-780.png||height="462" width="216"]]
403 403  
404 -(((
405 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
406 -)))
444 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
407 407  
446 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
408 408  
409 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
410 410  
411 -(((
412 -After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
413 -)))
414 414  
415 -(((
416 -If you don’t see MAC address, make sure your mobile has good internet connection.
417 -)))
418 418  
419 -[[image:1651832880009-473.png]]
451 +1.
452 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
420 420  
454 +//This is caused by the server connection delay, which does not affect the normal use.//
421 421  
422 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
456 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
423 423  
424 -This is caused by the server connection delay, which does not affect the normal use.
425 425  
426 -[[image:1651832959907-357.png]]
459 +*
460 +*1. Mobile APP crash after scan the QR Code?
461 +* //Make sure you have input the correct Wallet address to generate QR Code.//
462 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
463 +* //Make sure your mobile app’s relevant permission are enabled.//
464 +* //Known: The Android 11 version may cause this kind of issue.//
427 427  
466 +1.
467 +11. Why the frequency/region is not the same what I purchased?
428 428  
429 -===== 7.10 Mobile APP crash after scan the QR Code? =====
469 +//Each HP0D is inspected and configured prior to shipping.//
430 430  
431 -* Make sure you have input the correct Wallet address to generate QR Code.
432 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
433 -* Make sure your mobile app’s relevant permission are enabled.
434 -* Known: The Android 11 version may cause this kind of issue.
471 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
435 435  
436 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
437 437  
438 -(((
439 -Each HP0D is inspected and configured prior to shipping.
440 -)))
474 +1.
475 +11. Can use the frequency to a region where is not support?
441 441  
442 -(((
443 -If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
444 -)))
477 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
445 445  
479 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
446 446  
447 -===== 7.12 Can use the frequency to a region where is not support? =====
448 448  
449 -(((
450 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
451 -)))
482 +1.
483 +11. Can change the frequency of the HP0D Miner?
452 452  
453 -(((
454 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
455 -)))
485 +//We do not recommend doing this, it may damage your device//
456 456  
457 457  
458 -===== 7.13 Can change the frequency of the HP0D Miner? =====
459 459  
460 -We do not recommend doing this, it may damage your device
461 461  
462 462  
463 -==== 8. Supports ====
491 +1. Supports
464 464  
465 -(((
466 -If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
467 -)))
493 +//If you are experiencing issues and can’t solve, you can send mail to//
468 468  
469 -(((
470 -With your question as detail as possible. We will reply and help you in the shortest.
471 -)))
495 +[[//support@dragino.com//>>mailto:support@dragino.com]]
472 472  
497 +//With your question as detail as possible. We will reply and help you in the shortest.//
473 473  
474 -==== 9. Order Info ====
475 475  
500 +
501 +
502 +1. Order Info
503 +
476 476  **HP0D-XXX**
477 477  
478 478  **XXX**: Frequency Band
... ... @@ -480,55 +480,29 @@
480 480  * 868: For Bands: EU868,IN865
481 481  * 915: For Bands: US915,AU915,AS923,KR920
482 482  
483 -==== 10. Manufacturer Info ====
511 +1. Manufacturer Info
484 484  
485 -(((
486 486  **Shenzhen Dragino Technology Development co. LTD**
487 -)))
488 488  
489 -(((
490 490  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
491 -)))
492 492  
493 -(((
494 494  LongCheng Street, LongGang District ; Shenzhen 518116,China
495 -)))
496 496  
497 497  
498 -==== 11. FCC Warning ====
520 +1. FCC Warning
499 499  
500 -(((
501 501  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
502 -)))
503 503  
504 -(((
505 505  ~-~- Reorient or relocate the receiving antenna.
506 -)))
507 507  
508 -(((
509 509  ~-~- Increase the separation between the equipment and receiver.
510 -)))
511 511  
512 -(((
513 513  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
514 -)))
515 515  
516 -(((
517 517  ~-~- Consult the dealer or an experienced radio/TV technician for help.
518 -)))
519 519  
520 -(((
521 -
522 -)))
523 523  
524 -(((
525 525  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
526 -)))
527 527  
528 -(((
529 -
530 -)))
531 531  
532 -(((
533 533  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
534 -)))
1651828514449-658.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.1 KB
Content
1651828687205-178.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.6 KB
Content
1651828703680-156.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -113.7 KB
Content
1651829241318-427.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651829292719-315.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651829385186-114.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651829783380-920.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651829907019-256.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651830026619-866.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506172609-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.1 KB
Content
image-20220506173610-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20220506173921-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content