Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.17
edited by Xiaoling
on 2022/05/07 17:36
Change comment: There is no comment for this version
To version 49.1
edited by Xiaoling
on 2022/05/06 18:07
Change comment: Rollback to version 47.1

Summary

Details

Page properties
Content
... ... @@ -11,6 +11,7 @@
11 11  
12 12  
13 13  
14 +
14 14  {{toc/}}
15 15  
16 16  
... ... @@ -19,52 +19,123 @@
19 19  ===== 1.1 What is HP0D =====
20 20  
21 21  (((
22 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 +(((
24 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
23 23  )))
24 24  
25 25  (((
28 + Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
29 +)))
30 +
31 +(((
32 + at low data rates.
33 +)))
34 +)))
35 +
36 +(((
37 +(((
26 26  
27 27  )))
40 +)))
28 28  
29 29  (((
30 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
43 +(((
44 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
31 31  )))
32 32  
33 33  (((
48 + ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
49 +)))
50 +
51 +(((
52 + packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
53 +)))
54 +
55 +(((
56 + HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
57 +)))
58 +)))
59 +
60 +(((
61 +(((
62 +**~ and connects max 2 x LoRaWAN servers at the same time**.
63 +)))
64 +)))
65 +
66 +(((
67 +(((
34 34  
35 35  )))
70 +)))
36 36  
37 37  (((
38 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
73 +(((
74 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
39 39  )))
40 40  
41 41  (((
78 + for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
79 +)))
80 +)))
81 +
82 +(((
83 +(((
42 42  
43 43  )))
86 +)))
44 44  
45 45  (((
46 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
89 +(((
90 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
47 47  )))
48 48  
93 +(((
94 + customize the frequency bands to use in their own LoRaWAN network.
95 +)))
96 +)))
49 49  
98 +
50 50  ===== 1.2 Specifications =====
51 51  
101 +(((
52 52  **~ Hardware System:**
103 +)))
104 +
105 +(((
53 53   Linux Part:
107 +)))
54 54  
55 -* Raspberry Pi 4
109 +* (((
110 +Raspberry Pi 4
111 +)))
56 56  
113 +(((
57 57  **~ Interface:**
115 +)))
58 58  
59 -* 10M/100M RJ45 Ports x 1
60 -* LoRaWAN Wireless
61 -* Power Input: 12V 2A, DC
117 +* (((
118 +10M/100M RJ45 Ports x 1
119 +)))
120 +* (((
121 +LoRaWAN Wireless
122 +)))
123 +* (((
124 +Power Input: 12V 2A, DC
125 +)))
62 62  
127 +(((
63 63  **~ Operating Condition:**
129 +)))
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
67 -* Power Input: 12V 2A, DC
131 +* (((
132 +Work Temperature: -20 ~~ 65°C
133 +)))
134 +* (((
135 +Storage Temperature: -20 ~~ 65°C
136 +)))
137 +* (((
138 +Power Input: 12V 2A, DC
139 +)))
68 68  
69 69  ===== 1.3 Features =====
70 70  
... ... @@ -85,75 +85,129 @@
85 85  
86 86  ===== 1.4 Label info and login name =====
87 87  
88 -[[image:1651803959860-394.png||height="500" width="375"]]
89 89  
90 -**Label information:**
91 -**Device host name:**    (% class="mark" %)dragino-xxxxxx
92 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
93 -**Miner animal name**: xxx-xxx-xxx
94 -**Miner address**:       112xxxxxx
95 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
96 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
97 -**SN**:  device serial number.
161 +(% style="text-align:center" %)
162 +[[image:1651803959860-394.png||height="653" width="490"]]
98 98  
99 -==== 2. Quick Start & Onboarding ====
100 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
101 101  
102 -(% class="wikigeneratedid" id="H-2" %)
103 103  
104 -===== 2.1  Connect HP0D Web UI =====
166 +(((
167 +**~ Label information:**
168 +)))
105 105  
106 -====== 2.1.1 via HP0D’s Access Point. ======
170 +(((
171 +
172 +)))
107 107  
108 108  (((
175 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
176 +)))
177 +
109 109  (((
110 -At the first boot of HP0D, it will auto generate a Wi-Fi network
179 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
180 +)))
111 111  
112 -[[image:1651804327535-321.png||height="325" width="199"]]
182 +(((
183 +**~ Miner animal name**: xxx-xxx-xxx
113 113  )))
185 +
186 +(((
187 +**~ Miner address**:          112xxxxxx
114 114  )))
115 115  
116 116  (((
191 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
192 +)))
193 +
117 117  (((
118 -
195 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
119 119  )))
197 +
198 +(((
199 +**~ SN**:  device serial number.
120 120  )))
121 121  
202 +
203 +==== 2. Quick Start & Onboarding ====
204 +
122 122  (((
123 123  (((
124 -(% class="box infomessage" %)
207 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after
208 +)))
209 +
125 125  (((
126 - called           : **//HPD-dragino-xxxxxx//**
211 + connecting to its Wi-Fi network, or via its WAN Ethernet port.
127 127  )))
128 128  )))
214 +
215 +(% class="wikigeneratedid" id="H-2" %)
216 +(((
217 +
129 129  )))
130 130  
220 +===== 2.1  Connect HP0D Web UI =====
221 +
222 +====== 2.1.1 via HP0D’s Access Point. ======
223 +
131 131  (((
225 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
226 +)))
227 +
132 132  (((
133 -(% class="box infomessage" %)
229 +
230 +)))
231 +
134 134  (((
135 - with password:  **//dragino+dragino//**
233 + called           : **//HPD-dragino-xxxxxx//**
136 136  )))
235 +
236 +(((
237 + with password:  **//dragino+dragino//**
137 137  )))
239 +
240 +(((
241 +
138 138  )))
139 139  
140 140  (((
245 +
246 +)))
247 +
141 141  (((
142 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
249 + You can use a PC to connect to this Wi-Fi network. The PC will
143 143  )))
251 +
252 +(((
253 + get an IP address 10.130.1.xxx and the HP0D has the default
144 144  )))
145 145  
146 -[[image:1651804397792-591.png||height="402" width="763"]]
256 +(((
257 + IP 10.130.1.1
258 +)))
147 147  
148 148  
261 +
262 +
263 +
264 +
265 +(% style="text-align:center" %)
266 +[[image:1651804397792-591.png]]
267 +
268 +
269 +
149 149  ====== 2.1.2 Connect via HP0D hostname ======
150 150  
151 -(((
152 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
272 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
153 153  
154 -Like: __**//http:~/~/dragino-4ba54a//**__
155 -)))
274 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
156 156  
276 + Web-UI via HP0D’s hostname.
277 +
278 +
279 + Like: __**//http:~/~/dragino-4ba54a//**__
280 +
281 +
282 +(% style="text-align:center" %)
157 157  [[image:1651804629009-699.png]]
158 158  
159 159  
... ... @@ -160,82 +160,93 @@
160 160  ====== 2.1.3 Connect via Ethernet Port ======
161 161  
162 162  (((
289 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
290 +)))
291 +
163 163  (((
164 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
293 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
165 165  )))
166 -)))
167 167  
168 168  (((
169 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
297 +
170 170  )))
171 171  
300 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
301 +
302 +(% style="text-align:center" %)
172 172  [[image:1651804782523-623.png]]
173 173  
174 174  
306 +
175 175  ===== 2.2 Generate QR Code =====
176 176  
177 177  (((
178 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
310 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
179 179  )))
180 180  
181 181  (((
182 -Note: After onboarding, this wallet will become owner of this hotspot.
314 + Note: After onboarding, this wallet will become owner of this hotspot.
183 183  )))
184 184  
185 -[[image:image-20220506140312-1.png||height="435" width="438"]]
317 +(% style="text-align:center" %)
318 +[[image:image-20220506140312-1.png]]
186 186  
187 187  
188 188  ===== 2.3 Onboarding Hotspot =====
189 189  
190 190  (((
191 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
324 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
192 192  )))
193 193  
194 194  (((
195 -Note: the APP version need to be greater than 3.11.
328 + Note: the APP version need to be greater than 3.11.
329 +)))
196 196  
331 +(((
197 197  
198 198  )))
199 199  
200 200  (((
201 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
336 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
202 202  )))
203 203  
204 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
339 +(((
340 + the ‘DRAGINO Miner HP0D’
341 +)))
205 205  
343 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
206 206  
207 -3. Scan the QR Code you generated in the previous step.
345 + 3. Scan the QR Code you generated in the previous step.
208 208  
347 +(% style="text-align:center" %)
209 209  [[image:1651828211026-220.png||height="405" width="191"]]
210 210  
350 + 4. Onboarding your device
211 211  
212 -(((
213 -4. Onboarding your device
214 -)))
352 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
215 215  
216 -(((
217 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  
218 -)))
354 + mobile to onboarding server might have issue.
219 219  
220 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
356 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
221 221  
222 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
358 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
223 223  
224 224  
225 225  5. Check onboarding status
226 226  
227 -You can check from mobile:
363 + You can check from mobile:
228 228  
229 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
365 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
230 230  
231 -You can also see the hotspot status in below link:
367 + You can also see the hotspot status in below link:
232 232  
233 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
369 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
234 234  
235 -Example:
371 + Example:
236 236  
237 -Green Synced means hotspot works normal.
373 + Green Synced means hotspot works normal.
238 238  
375 +(% style="text-align:center" %)
239 239  [[image:1651828427715-679.png||height="374" width="635"]]
240 240  
241 241  
... ... @@ -242,9 +242,18 @@
242 242  ===== 2.4 Set the Port Forwarding =====
243 243  
244 244  (((
245 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
382 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
246 246  )))
247 247  
385 +(((
386 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
387 +)))
388 +
389 +(((
390 + you may have.
391 +)))
392 +
393 +(% style="text-align:center" %)
248 248  [[image:1651828514449-658.png]]
249 249  
250 250  (((
... ... @@ -252,15 +252,15 @@
252 252  )))
253 253  
254 254  (((
255 -Note: Please refer to more detailed Settings
401 + Note: Please refer to more detailed Settings
256 256  )))
257 257  
258 258  (((
259 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
405 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
260 260  )))
261 261  
262 262  (((
263 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
409 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
264 264  )))
265 265  
266 266  
... ... @@ -268,254 +268,193 @@
268 268  
269 269  ===== 3.1 LoRa frequency configuration =====
270 270  
417 +(% style="text-align:center" %)
271 271  [[image:1651828687205-178.png||height="323" width="657"]]
272 272  
273 273  
421 +
274 274  ===== 3.2 Check the LoRaWAN serveraddress =====
275 275  
424 +
425 +(% style="text-align:center" %)
276 276  [[image:1651828703680-156.png||height="349" width="672"]]
277 277  
278 278  
279 -===== 3.3 Check Miner configuration =====
280 280  
281 -[[image:image-20220506181408-1.png||height="451" width="513"]]
282 282  
283 -(((
284 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
285 -)))
286 286  
287 287  
288 -==== 4. Installation of Antenna ====
289 289  
290 -(((
291 -HP0D use Fiber Glass Antenna.
292 -)))
293 293  
294 -[[image:1651832158606-882.png]]
435 +1.
436 +11. Check Miner configuration
295 295  
296 -(((
297 -
298 -)))
438 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
299 299  
300 -(((
301 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
302 -)))
440 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
303 303  
304 -(((
305 -[[image:1651832205608-998.png||height="349" width="198"]]
306 -)))
307 307  
308 -==== 5. SSH Access for Linux console ====
309 309  
310 -(((
311 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
312 -)))
313 313  
314 -(((
315 -Port:         22
316 -)))
317 317  
318 -(((
319 -User Name:      **root**
320 -)))
446 +1. Installation of Antenna
321 321  
322 -(((
323 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
324 -)))
448 +HP0D use Fiber Glass Antenna.
325 325  
326 -(((
327 -After logging in, you will be in the Linux console and can enter commands as shown below.
328 -)))
450 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
329 329  
330 -[[image:1651832284160-991.png]]
452 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
331 331  
332 332  
333 -==== **6. How to change the Wireless function of HP0D** ====
455 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
334 334  
335 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
336 336  
337 -===== **6.1 Access the Linux console.** =====
338 338  
339 -Follow the previous step of Step 5.
340 340  
341 341  
342 -===== 6.2 Install the package of network-manager. =====
461 +1. SSH Access for Linux console
343 343  
344 -Run commands:
463 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
345 345  
346 -(% class="box infomessage" %)
347 -(((
348 - apt update
349 - apt install network-manager
350 -)))
465 +Port:         22
351 351  
352 -[[image:image-20220507140730-1.png]]
467 +User Name:      **root**
353 353  
469 +Password:         **Randomly generated （found on device’s label ）**
354 354  
355 -===== 6.3 Reboot the device. =====
356 356  
357 -Run command:
472 +After logging in, you will be in the Linux console and can enter commands as shown below.
358 358  
359 -(% class="box infomessage" %)
360 -(((
361 - reboot
362 -)))
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
363 363  
364 -[[image:image-20220507140814-2.png]]
365 365  
366 -===== 6.4 Check the wireless type =====
367 367  
368 -Run command:
369 369  
370 -(% class="box infomessage" %)
371 -(((
372 - iw dev
373 -)))
479 +1. Trouble Shootings
480 +11. How to get a wallet address?
374 374  
375 -[[image:image-20220507140941-3.png]]
482 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
376 376  
377 -===== 6.5 Connect the WiFi. =====
378 378  
379 -Run command:
485 +1.
486 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
380 380  
381 -(% class="box infomessage" %)
382 -(((
383 - nmtui
384 -)))
488 +//User can login the HP0D, able to access other Web Pages except miner page//
385 385  
386 -[[image:image-20220507140953-4.png]]
387 387  
491 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
388 388  
389 -==== 7. Trouble Shootings ====
390 390  
391 -===== 7.1 How to get a wallet address? =====
494 +1.
495 +11. Onboarding ~-~- Some parameters in miner page show timeout
392 392  
393 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
497 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
394 394  
499 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
395 395  
396 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
501 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
397 397  
398 -(((
399 -User can login the HP0D, able to access other Web Pages except miner page.
400 -)))
503 +//It might relate to the network where might up to 10mins//
401 401  
402 -(((
403 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
404 -)))
405 405  
506 +1.
507 +11. Onboarding – Bad Gaterway
406 406  
407 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
509 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
408 408  
409 -[[image:image-20220506182042-2.png||height="250" width="516"]]
511 +//This is caused by the process leads too long which just need to refresh the page.//
410 410  
411 -[[image:1651832455372-647.png||height="224" width="520"]]
412 412  
413 -HP0D is establish connection to Helium server and not finished. And you might see above.
514 +1.
515 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
414 414  
415 -It might relate to the network where might up to 10mins.
517 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
416 416  
519 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
417 417  
418 -===== 7.4 Onboarding – Bad Gaterway =====
419 419  
420 -[[image:1651832583790-633.png]]
522 +1.
523 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
421 421  
422 -This is caused by the process leads too long which just need to refresh the page.
525 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
423 423  
527 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
424 424  
425 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
426 426  
427 -[[image:image-20220506182424-3.png]]
530 +1.
531 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
428 428  
429 -(((
430 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
431 -)))
533 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
432 432  
535 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
433 433  
434 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
435 435  
436 -[[image:1651832742262-209.png||height="297" width="365"]]
538 +1.
539 +11. Onboarding – MAC address is being refreshed after scan QR Code
437 437  
438 -(((
439 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
440 -)))
541 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
441 441  
442 442  
443 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
544 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
444 444  
445 -[[image:1651832811038-780.png||height="462" width="216"]]
546 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
446 446  
447 -(((
448 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
449 -)))
450 450  
451 451  
452 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
453 453  
454 -(((
455 -After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
456 -)))
551 +1.
552 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
457 457  
458 -(((
459 -If you don’t see MAC address, make sure your mobile has good internet connection.
460 -)))
554 +//This is caused by the server connection delay, which does not affect the normal use.//
461 461  
462 -[[image:1651832880009-473.png]]
556 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
463 463  
464 464  
465 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
559 +*
560 +*1. Mobile APP crash after scan the QR Code?
561 +* //Make sure you have input the correct Wallet address to generate QR Code.//
562 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
563 +* //Make sure your mobile app’s relevant permission are enabled.//
564 +* //Known: The Android 11 version may cause this kind of issue.//
466 466  
467 -This is caused by the server connection delay, which does not affect the normal use.
566 +1.
567 +11. Why the frequency/region is not the same what I purchased?
468 468  
469 -[[image:1651832959907-357.png]]
569 +//Each HP0D is inspected and configured prior to shipping.//
470 470  
571 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
471 471  
472 -===== 7.10 Mobile APP crash after scan the QR Code? =====
473 473  
474 -* Make sure you have input the correct Wallet address to generate QR Code.
475 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
476 -* Make sure your mobile app’s relevant permission are enabled.
477 -* Known: The Android 11 version may cause this kind of issue.
574 +1.
575 +11. Can use the frequency to a region where is not support?
478 478  
479 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
577 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
480 480  
481 -(((
482 -Each HP0D is inspected and configured prior to shipping.
483 -)))
579 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
484 484  
485 -(((
486 -If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
487 -)))
488 488  
582 +1.
583 +11. Can change the frequency of the HP0D Miner?
489 489  
490 -===== 7.12 Can use the frequency to a region where is not support? =====
585 +//We do not recommend doing this, it may damage your device//
491 491  
492 -(((
493 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
494 -)))
495 495  
496 -(((
497 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
498 -)))
499 499  
500 500  
501 -===== 7.13 Can change the frequency of the HP0D Miner? =====
502 502  
503 -We do not recommend doing this, it may damage your device
591 +1. Supports
504 504  
593 +//If you are experiencing issues and can’t solve, you can send mail to//
505 505  
506 -==== 8. Supports ====
595 +[[//support@dragino.com//>>mailto:support@dragino.com]]
507 507  
508 -(((
509 -If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
510 -)))
597 +//With your question as detail as possible. We will reply and help you in the shortest.//
511 511  
512 -(((
513 -With your question as detail as possible. We will reply and help you in the shortest.
514 -)))
515 515  
516 516  
517 -==== 9. Order Info ====
518 518  
602 +1. Order Info
603 +
519 519  **HP0D-XXX**
520 520  
521 521  **XXX**: Frequency Band
... ... @@ -523,55 +523,29 @@
523 523  * 868: For Bands: EU868,IN865
524 524  * 915: For Bands: US915,AU915,AS923,KR920
525 525  
526 -==== 10. Manufacturer Info ====
611 +1. Manufacturer Info
527 527  
528 -(((
529 529  **Shenzhen Dragino Technology Development co. LTD**
530 -)))
531 531  
532 -(((
533 533  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
534 -)))
535 535  
536 -(((
537 537  LongCheng Street, LongGang District ; Shenzhen 518116,China
538 -)))
539 539  
540 540  
541 -==== 11. FCC Warning ====
620 +1. FCC Warning
542 542  
543 -(((
544 544  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
545 -)))
546 546  
547 -(((
548 548  ~-~- Reorient or relocate the receiving antenna.
549 -)))
550 550  
551 -(((
552 552  ~-~- Increase the separation between the equipment and receiver.
553 -)))
554 554  
555 -(((
556 556  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
557 -)))
558 558  
559 -(((
560 560  ~-~- Consult the dealer or an experienced radio/TV technician for help.
561 -)))
562 562  
563 -(((
564 -
565 -)))
566 566  
567 -(((
568 568  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
569 -)))
570 570  
571 -(((
572 -
573 -)))
574 574  
575 -(((
576 576  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
577 -)))
1651832158606-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content