Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.11
edited by Xiaoling
on 2022/05/07 15:41
Change comment: There is no comment for this version
To version 74.3
edited by Xiaoling
on 2022/05/14 14:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Content
... ... @@ -11,120 +11,49 @@
11 11  
12 12  
13 13  
14 -
15 15  {{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
17 += 1. Introduction =
19 19  
20 -===== 1.1 What is HP0D =====
19 +== 1.1 What is HP0D ==
21 21  
22 22  (((
23 -(((
24 -(((
25 25  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 26  )))
27 -)))
28 -)))
29 29  
30 30  (((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
26 +HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
34 34  )))
35 -)))
36 -)))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
42 -)))
43 -)))
44 -)))
45 -
46 -(((
47 -(((
48 -(((
49 49  **Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 50  )))
51 -)))
52 -)))
53 53  
54 54  (((
55 -(((
56 -(((
57 57  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
37 +== 1.2 Specifications ==
62 62  
63 -===== 1.2 Specifications =====
64 -
65 -(((
66 -(((
67 67  **~ Hardware System:**
68 -)))
69 -)))
70 -
71 -(((
72 -(((
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
42 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 85  **~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
46 +* 10M/100M RJ45 Ports x 1
47 +* LoRaWAN Wireless
48 +* Power Input: 12V 2A, DC
104 104  
105 -(((
106 -(((
107 107  **~ Operating Condition:**
108 -)))
109 -)))
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
52 +* Work Temperature: -20 ~~ 65°C
53 +* Storage Temperature: -20 ~~ 65°C
54 +* Power Input: 12V 2A, DC
126 126  
127 -===== 1.3 Features =====
56 +== 1.3 Features ==
128 128  
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
... ... @@ -141,146 +141,56 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
73 +== 1.4 Label info and login name ==
145 145  
146 -
147 147  [[image:1651803959860-394.png||height="500" width="375"]]
148 -
149 -(((
150 -(((
151 151  **Label information:**
152 -)))
153 -)))
154 -
155 -(((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
158 -)))
159 -)))
160 -
161 -(((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 -)))
165 -)))
166 -
167 -(((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
170 -)))
171 -)))
172 -
173 -(((
174 -(((
175 -**Miner address**:          112xxxxxx
176 -)))
177 -)))
178 -
179 -(((
180 -(((
77 +**Device host name:**    (% class="mark" %)dragino-xxxxxx
78 +**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
79 +**Miner animal name**: xxx-xxx-xxx
80 +**Miner address**:       112xxxxxx
181 181  **Eth MAC address**: A8: 40: 41: EF: FE: CD
182 -)))
183 -)))
82 +**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
83 +**SN**:  device serial number.
184 184  
185 -(((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 -)))
189 -)))
85 += 2. Quick Start & Onboarding =
190 190  
191 -(((
192 -(((
193 -**SN**:  device serial number.
194 -)))
195 -)))
196 -
197 -
198 -==== 2. Quick Start & Onboarding ====
199 -
200 -(((
201 -(((
202 202  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 -)))
204 -)))
205 205  
206 -(% class="wikigeneratedid" id="H-2" %)
207 -(((
208 -
209 -)))
89 +== 2.1  Connect HP0D Web UI ==
210 210  
211 -===== 2.1  Connect HP0D Web UI =====
91 +=== 2.1.1 via HP0D’s Access Point ===
212 212  
213 -====== 2.1.1 via HP0D’s Access Point. ======
214 -
215 -(((
216 -(((
217 217  At the first boot of HP0D, it will auto generate a Wi-Fi network
218 218  
219 219  [[image:1651804327535-321.png||height="325" width="199"]]
220 -)))
221 -)))
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
228 -
229 -(((
230 -(((
231 231  (% class="box infomessage" %)
232 -(((
233 233   called           : **//HPD-dragino-xxxxxx//**
234 -)))
235 -)))
236 -)))
237 237  
238 -(((
239 -(((
240 240  (% class="box infomessage" %)
241 -(((
242 242   with password:  **//dragino+dragino//**
243 -)))
244 -)))
245 -)))
246 -
247 -(((
248 -(((
249 249  You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 -)))
251 -)))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
104 +[[image:1651804397792-591.png||height="386" width="733"]]
254 254  
255 255  
256 -====== 2.1.2 Connect via HP0D hostname ======
107 +=== 2.1.2 Connect via HP0D hostname ===
257 257  
258 -(((
259 259  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
260 260  
261 261  Like: __**//http:~/~/dragino-4ba54a//**__
262 -)))
263 263  
264 264  [[image:1651804629009-699.png]]
265 265  
115 +=== 2.1.3 Connect via Ethernet Port ===
266 266  
267 -====== 2.1.3 Connect via Ethernet Port ======
268 -
269 -(((
270 -(((
271 271  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
272 -)))
273 -)))
274 -
275 -(((
276 276  If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
277 -)))
278 -
279 279  [[image:1651804782523-623.png]]
280 280  
121 +== 2.2 Generate QR Code ==
281 281  
282 -===== 2.2 Generate QR Code =====
283 -
284 284  (((
285 285  Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
286 286  )))
... ... @@ -292,7 +292,7 @@
292 292  [[image:image-20220506140312-1.png||height="435" width="438"]]
293 293  
294 294  
295 -===== 2.3 Onboarding Hotspot =====
134 +== 2.3 Onboarding Hotspot ==
296 296  
297 297  (((
298 298  ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
... ... @@ -300,8 +300,6 @@
300 300  
301 301  (((
302 302  Note: the APP version need to be greater than 3.11.
303 -
304 -
305 305  )))
306 306  
307 307  (((
... ... @@ -310,18 +310,16 @@
310 310  
311 311   [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
312 312  
313 -
314 314  3. Scan the QR Code you generated in the previous step.
315 315  
316 316  [[image:1651828211026-220.png||height="405" width="191"]]
317 317  
318 -
319 319  (((
320 320  4. Onboarding your device
321 321  )))
322 322  
323 323  (((
324 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue. 
159 +Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  
325 325  )))
326 326  
327 327  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
... ... @@ -328,7 +328,6 @@
328 328  
329 329   [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
330 330  
331 -
332 332  5. Check onboarding status
333 333  
334 334  You can check from mobile:
... ... @@ -346,7 +346,7 @@
346 346  [[image:1651828427715-679.png||height="374" width="635"]]
347 347  
348 348  
349 -===== 2.4 Set the Port Forwarding =====
183 +== 2.4 Set the Port Forwarding ==
350 350  
351 351  (((
352 352  Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
... ... @@ -370,21 +370,18 @@
370 370  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
371 371  )))
372 372  
207 += 3. Check the configuration of HP0D =
373 373  
374 -==== 3. Check the configuration of HP0D ====
209 +== 3.1 LoRa frequency configuration ==
375 375  
376 -===== 3.1 LoRa frequency configuration =====
377 -
378 378  [[image:1651828687205-178.png||height="323" width="657"]]
379 379  
213 +== 3.2 Check the LoRaWAN serveraddress ==
380 380  
381 -===== 3.2 Check the LoRaWAN serveraddress =====
382 -
383 383  [[image:1651828703680-156.png||height="349" width="672"]]
384 384  
217 +== 3.3 Check Miner configuration ==
385 385  
386 -===== 3.3 Check Miner configuration =====
387 -
388 388  [[image:image-20220506181408-1.png||height="451" width="513"]]
389 389  
390 390  (((
... ... @@ -391,9 +391,8 @@
391 391  **Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
392 392  )))
393 393  
225 += 4. Installation of Antenna =
394 394  
395 -==== 4. Installation of Antenna ====
396 -
397 397  (((
398 398  HP0D use Fiber Glass Antenna.
399 399  )))
... ... @@ -412,7 +412,7 @@
412 412  [[image:1651832205608-998.png||height="349" width="198"]]
413 413  )))
414 414  
415 -==== 5. SSH Access for Linux console ====
245 += 5. SSH Access for Linux console =
416 416  
417 417  (((
418 418  IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
... ... @@ -434,20 +434,18 @@
434 434  After logging in, you will be in the Linux console and can enter commands as shown below.
435 435  )))
436 436  
437 -[[image:1651832284160-991.png]]
267 +[[image:1651832284160-991.png||height="171" width="729"]]
438 438  
269 += **6. How to change the Wireless function of HP0D** =
439 439  
440 -==== **6. How to change the Wireless function of HP0D** ====
441 -
442 442  The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
443 443  
444 -===== **6.1 Access the Linux console.** =====
273 +== **6.1 Access the Linux console.** ==
445 445  
446 446  Follow the previous step of Step 5.
447 447  
277 +== 6.2 Install the package of network-manager ==
448 448  
449 -===== 6.2 Install the package of network-manager. =====
450 -
451 451  Run commands:
452 452  
453 453  (% class="box infomessage" %)
... ... @@ -456,11 +456,10 @@
456 456   apt install network-manager
457 457  )))
458 458  
459 -[[image:image-20220507140730-1.png]]
287 +[[image:image-20220507140730-1.png||height="402" width="728"]]
460 460  
289 +== 6.3 Reboot the device ==
461 461  
462 -===== 6.3 Reboot the device. =====
463 -
464 464  Run command:
465 465  
466 466  (% class="box infomessage" %)
... ... @@ -470,7 +470,7 @@
470 470  
471 471  [[image:image-20220507140814-2.png]]
472 472  
473 -===== 6.4 Check the wireless type =====
300 +== 6.4 Check the wireless type ==
474 474  
475 475  Run command:
476 476  
... ... @@ -481,7 +481,7 @@
481 481  
482 482  [[image:image-20220507140941-3.png]]
483 483  
484 -===== 6.5 Connect the WiFi. =====
311 +== 6.5 Connect the WiFi ==
485 485  
486 486  Run command:
487 487  
... ... @@ -492,16 +492,14 @@
492 492  
493 493  [[image:image-20220507140953-4.png]]
494 494  
322 += 7. Trouble Shootings =
495 495  
496 -==== 7. Trouble Shootings ====
324 +== 7.1 How to get a wallet address? ==
497 497  
498 -===== 7.1 How to get a wallet address? =====
499 -
500 500  Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
501 501  
328 +== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner ==
502 502  
503 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
504 -
505 505  (((
506 506  User can login the HP0D, able to access other Web Pages except miner page.
507 507  )))
... ... @@ -510,9 +510,8 @@
510 510  If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
511 511  )))
512 512  
338 +== 7.3 Onboarding ~-~- Some parameters in miner page show timeout ==
513 513  
514 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
515 -
516 516  [[image:image-20220506182042-2.png||height="250" width="516"]]
517 517  
518 518  [[image:1651832455372-647.png||height="224" width="520"]]
... ... @@ -521,16 +521,14 @@
521 521  
522 522  It might relate to the network where might up to 10mins.
523 523  
348 +== 7.4 Onboarding – Bad Gaterway ==
524 524  
525 -===== 7.4 Onboarding – Bad Gaterway =====
526 -
527 527  [[image:1651832583790-633.png]]
528 528  
529 529  This is caused by the process leads too long which just need to refresh the page.
530 530  
354 +== 7.5 Onboarding ~-~- Why did QR Code generate is aways fail? ==
531 531  
532 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
533 -
534 534  [[image:image-20220506182424-3.png]]
535 535  
536 536  (((
... ... @@ -537,9 +537,8 @@
537 537  This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
538 538  )))
539 539  
362 +== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? ==
540 540  
541 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
542 -
543 543  [[image:1651832742262-209.png||height="297" width="365"]]
544 544  
545 545  (((
... ... @@ -546,9 +546,8 @@
546 546  Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
547 547  )))
548 548  
370 +== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code ==
549 549  
550 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
551 -
552 552  [[image:1651832811038-780.png||height="462" width="216"]]
553 553  
554 554  (((
... ... @@ -555,9 +555,8 @@
555 555  If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
556 556  )))
557 557  
378 +== 7.8 Onboarding – MAC address is being refreshed after scan QR Code ==
558 558  
559 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
560 -
561 561  (((
562 562  After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
563 563  )))
... ... @@ -568,24 +568,21 @@
568 568  
569 569  [[image:1651832880009-473.png]]
570 570  
390 +== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ ==
571 571  
572 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
573 -
574 574  This is caused by the server connection delay, which does not affect the normal use.
575 575  
576 576  [[image:1651832959907-357.png]]
577 577  
396 +== 7.10 Mobile APP crash after scan the QR Code? ==
578 578  
579 -===== 7.10 Mobile APP crash after scan the QR Code? =====
580 -
581 581  * Make sure you have input the correct Wallet address to generate QR Code.
582 582  * Make sure your mobile app uses the same wallet address as the one to generate QR Code.
583 583  * Make sure your mobile app’s relevant permission are enabled.
584 584  * Known: The Android 11 version may cause this kind of issue.
585 585  
403 +== 7.11 Why the frequency/region is not the same what I purchased? ==
586 586  
587 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
588 -
589 589  (((
590 590  Each HP0D is inspected and configured prior to shipping.
591 591  )))
... ... @@ -594,9 +594,8 @@
594 594  If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
595 595  )))
596 596  
413 +== 7.12 Can use the frequency to a region where is not support? ==
597 597  
598 -===== 7.12 Can use the frequency to a region where is not support? =====
599 -
600 600  (((
601 601  Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
602 602  )))
... ... @@ -605,14 +605,12 @@
605 605  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
606 606  )))
607 607  
423 +== 7.13 Can change the frequency of the HP0D Miner? ==
608 608  
609 -===== 7.13 Can change the frequency of the HP0D Miner? =====
610 -
611 611  We do not recommend doing this, it may damage your device
612 612  
427 += 8. Supports =
613 613  
614 -==== 8. Supports ====
615 -
616 616  (((
617 617  If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
618 618  )))
... ... @@ -621,9 +621,8 @@
621 621  With your question as detail as possible. We will reply and help you in the shortest.
622 622  )))
623 623  
437 += 9. Order Info =
624 624  
625 -==== 9. Order Info ====
626 -
627 627  **HP0D-XXX**
628 628  
629 629  **XXX**: Frequency Band
... ... @@ -631,9 +631,8 @@
631 631  * 868: For Bands: EU868,IN865
632 632  * 915: For Bands: US915,AU915,AS923,KR920
633 633  
446 += 10. Manufacturer Info =
634 634  
635 -==== 10. Manufacturer Info ====
636 -
637 637  (((
638 638  **Shenzhen Dragino Technology Development co. LTD**
639 639  )))
... ... @@ -646,9 +646,8 @@
646 646  LongCheng Street, LongGang District ; Shenzhen 518116,China
647 647  )))
648 648  
460 += 11. FCC Warning =
649 649  
650 -==== 11. FCC Warning ====
651 -
652 652  (((
653 653  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
654 654  )))
... ... @@ -670,17 +670,9 @@
670 670  )))
671 671  
672 672  (((
673 -
674 -)))
675 -
676 -(((
677 677  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
678 678  )))
679 679  
680 680  (((
681 -
682 -)))
683 -
684 -(((
685 685  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
686 686  )))