Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.10
edited by Xiaoling
on 2022/05/07 15:23
Change comment: There is no comment for this version
To version 74.3
edited by Xiaoling
on 2022/05/14 14:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Content
... ... @@ -11,120 +11,49 @@
11 11  
12 12  
13 13  
14 -
15 15  {{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
17 += 1. Introduction =
19 19  
20 -===== 1.1 What is HP0D =====
19 +== 1.1 What is HP0D ==
21 21  
22 22  (((
23 -(((
24 -(((
25 25  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 26  )))
27 -)))
28 -)))
29 29  
30 30  (((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
26 +HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
34 34  )))
35 -)))
36 -)))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
42 -)))
43 -)))
44 -)))
45 -
46 -(((
47 -(((
48 -(((
49 49  **Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 50  )))
51 -)))
52 -)))
53 53  
54 54  (((
55 -(((
56 -(((
57 57  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
37 +== 1.2 Specifications ==
62 62  
63 -===== 1.2 Specifications =====
64 -
65 -(((
66 -(((
67 67  **~ Hardware System:**
68 -)))
69 -)))
70 -
71 -(((
72 -(((
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
42 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 85  **~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
46 +* 10M/100M RJ45 Ports x 1
47 +* LoRaWAN Wireless
48 +* Power Input: 12V 2A, DC
104 104  
105 -(((
106 -(((
107 107  **~ Operating Condition:**
108 -)))
109 -)))
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
52 +* Work Temperature: -20 ~~ 65°C
53 +* Storage Temperature: -20 ~~ 65°C
54 +* Power Input: 12V 2A, DC
126 126  
127 -===== 1.3 Features =====
56 +== 1.3 Features ==
128 128  
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
... ... @@ -141,146 +141,56 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
73 +== 1.4 Label info and login name ==
145 145  
146 -
147 147  [[image:1651803959860-394.png||height="500" width="375"]]
148 -
149 -(((
150 -(((
151 151  **Label information:**
152 -)))
153 -)))
154 -
155 -(((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
158 -)))
159 -)))
160 -
161 -(((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 -)))
165 -)))
166 -
167 -(((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
170 -)))
171 -)))
172 -
173 -(((
174 -(((
175 -**Miner address**:          112xxxxxx
176 -)))
177 -)))
178 -
179 -(((
180 -(((
77 +**Device host name:**    (% class="mark" %)dragino-xxxxxx
78 +**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
79 +**Miner animal name**: xxx-xxx-xxx
80 +**Miner address**:       112xxxxxx
181 181  **Eth MAC address**: A8: 40: 41: EF: FE: CD
182 -)))
183 -)))
82 +**Login**:  root/d59f2d5b (the root is the Login account for the Web-UI and SSH.(%%))
83 +**SN**:  device serial number.
184 184  
185 -(((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 -)))
189 -)))
85 += 2. Quick Start & Onboarding =
190 190  
191 -(((
192 -(((
193 -**SN**:  device serial number.
194 -)))
195 -)))
196 -
197 -
198 -==== 2. Quick Start & Onboarding ====
199 -
200 -(((
201 -(((
202 202  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 -)))
204 -)))
205 205  
206 -(% class="wikigeneratedid" id="H-2" %)
207 -(((
208 -
209 -)))
89 +== 2.1  Connect HP0D Web UI ==
210 210  
211 -===== 2.1  Connect HP0D Web UI =====
91 +=== 2.1.1 via HP0D’s Access Point ===
212 212  
213 -====== 2.1.1 via HP0D’s Access Point. ======
214 -
215 -(((
216 -(((
217 217  At the first boot of HP0D, it will auto generate a Wi-Fi network
218 218  
219 219  [[image:1651804327535-321.png||height="325" width="199"]]
220 -)))
221 -)))
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
228 -
229 -(((
230 -(((
231 231  (% class="box infomessage" %)
232 -(((
233 233   called           : **//HPD-dragino-xxxxxx//**
234 -)))
235 -)))
236 -)))
237 237  
238 -(((
239 -(((
240 240  (% class="box infomessage" %)
241 -(((
242 242   with password:  **//dragino+dragino//**
243 -)))
244 -)))
245 -)))
246 -
247 -(((
248 -(((
249 249  You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 -)))
251 -)))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
104 +[[image:1651804397792-591.png||height="386" width="733"]]
254 254  
255 255  
256 -====== 2.1.2 Connect via HP0D hostname ======
107 +=== 2.1.2 Connect via HP0D hostname ===
257 257  
258 -(((
259 259  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
260 260  
261 261  Like: __**//http:~/~/dragino-4ba54a//**__
262 -)))
263 263  
264 264  [[image:1651804629009-699.png]]
265 265  
115 +=== 2.1.3 Connect via Ethernet Port ===
266 266  
267 -====== 2.1.3 Connect via Ethernet Port ======
268 -
269 -(((
270 -(((
271 271  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
272 -)))
273 -)))
274 -
275 -(((
276 276  If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
277 -)))
278 -
279 279  [[image:1651804782523-623.png]]
280 280  
121 +== 2.2 Generate QR Code ==
281 281  
282 -===== 2.2 Generate QR Code =====
283 -
284 284  (((
285 285  Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
286 286  )))
... ... @@ -292,7 +292,7 @@
292 292  [[image:image-20220506140312-1.png||height="435" width="438"]]
293 293  
294 294  
295 -===== 2.3 Onboarding Hotspot =====
134 +== 2.3 Onboarding Hotspot ==
296 296  
297 297  (((
298 298  ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
... ... @@ -300,8 +300,6 @@
300 300  
301 301  (((
302 302  Note: the APP version need to be greater than 3.11.
303 -
304 -
305 305  )))
306 306  
307 307  (((
... ... @@ -310,16 +310,16 @@
310 310  
311 311   [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
312 312  
313 -
314 314  3. Scan the QR Code you generated in the previous step.
315 315  
316 316  [[image:1651828211026-220.png||height="405" width="191"]]
317 317  
318 -
154 +(((
319 319  4. Onboarding your device
156 +)))
320 320  
321 321  (((
322 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue. 
159 +Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  
323 323  )))
324 324  
325 325  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
... ... @@ -326,7 +326,6 @@
326 326  
327 327   [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
328 328  
329 -
330 330  5. Check onboarding status
331 331  
332 332  You can check from mobile:
... ... @@ -344,7 +344,7 @@
344 344  [[image:1651828427715-679.png||height="374" width="635"]]
345 345  
346 346  
347 -===== 2.4 Set the Port Forwarding =====
183 +== 2.4 Set the Port Forwarding ==
348 348  
349 349  (((
350 350  Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
... ... @@ -368,21 +368,18 @@
368 368  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
369 369  )))
370 370  
207 += 3. Check the configuration of HP0D =
371 371  
372 -==== 3. Check the configuration of HP0D ====
209 +== 3.1 LoRa frequency configuration ==
373 373  
374 -===== 3.1 LoRa frequency configuration =====
375 -
376 376  [[image:1651828687205-178.png||height="323" width="657"]]
377 377  
213 +== 3.2 Check the LoRaWAN serveraddress ==
378 378  
379 -===== 3.2 Check the LoRaWAN serveraddress =====
380 -
381 381  [[image:1651828703680-156.png||height="349" width="672"]]
382 382  
217 +== 3.3 Check Miner configuration ==
383 383  
384 -===== 3.3 Check Miner configuration =====
385 -
386 386  [[image:image-20220506181408-1.png||height="451" width="513"]]
387 387  
388 388  (((
... ... @@ -389,9 +389,8 @@
389 389  **Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
390 390  )))
391 391  
225 += 4. Installation of Antenna =
392 392  
393 -==== 4. Installation of Antenna ====
394 -
395 395  (((
396 396  HP0D use Fiber Glass Antenna.
397 397  )))
... ... @@ -410,7 +410,7 @@
410 410  [[image:1651832205608-998.png||height="349" width="198"]]
411 411  )))
412 412  
413 -==== 5. SSH Access for Linux console ====
245 += 5. SSH Access for Linux console =
414 414  
415 415  (((
416 416  IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
... ... @@ -432,20 +432,18 @@
432 432  After logging in, you will be in the Linux console and can enter commands as shown below.
433 433  )))
434 434  
435 -[[image:1651832284160-991.png]]
267 +[[image:1651832284160-991.png||height="171" width="729"]]
436 436  
269 += **6. How to change the Wireless function of HP0D** =
437 437  
438 -==== **6. How to change the Wireless function of HP0D** ====
439 -
440 440  The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
441 441  
442 -===== **6.1 Access the Linux console.** =====
273 +== **6.1 Access the Linux console.** ==
443 443  
444 444  Follow the previous step of Step 5.
445 445  
277 +== 6.2 Install the package of network-manager ==
446 446  
447 -===== 6.2 Install the package of network-manager. =====
448 -
449 449  Run commands:
450 450  
451 451  (% class="box infomessage" %)
... ... @@ -454,11 +454,10 @@
454 454   apt install network-manager
455 455  )))
456 456  
457 -[[image:image-20220507140730-1.png]]
287 +[[image:image-20220507140730-1.png||height="402" width="728"]]
458 458  
289 +== 6.3 Reboot the device ==
459 459  
460 -===== 6.3 Reboot the device. =====
461 -
462 462  Run command:
463 463  
464 464  (% class="box infomessage" %)
... ... @@ -468,7 +468,7 @@
468 468  
469 469  [[image:image-20220507140814-2.png]]
470 470  
471 -===== 6.4 Check the wireless type =====
300 +== 6.4 Check the wireless type ==
472 472  
473 473  Run command:
474 474  
... ... @@ -479,7 +479,7 @@
479 479  
480 480  [[image:image-20220507140941-3.png]]
481 481  
482 -===== 6.5 Connect the WiFi. =====
311 +== 6.5 Connect the WiFi ==
483 483  
484 484  Run command:
485 485  
... ... @@ -490,16 +490,14 @@
490 490  
491 491  [[image:image-20220507140953-4.png]]
492 492  
322 += 7. Trouble Shootings =
493 493  
494 -==== 7. Trouble Shootings ====
324 +== 7.1 How to get a wallet address? ==
495 495  
496 -===== 7.1 How to get a wallet address? =====
497 -
498 498  Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
499 499  
328 +== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner ==
500 500  
501 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
502 -
503 503  (((
504 504  User can login the HP0D, able to access other Web Pages except miner page.
505 505  )))
... ... @@ -508,9 +508,8 @@
508 508  If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
509 509  )))
510 510  
338 +== 7.3 Onboarding ~-~- Some parameters in miner page show timeout ==
511 511  
512 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
513 -
514 514  [[image:image-20220506182042-2.png||height="250" width="516"]]
515 515  
516 516  [[image:1651832455372-647.png||height="224" width="520"]]
... ... @@ -519,16 +519,14 @@
519 519  
520 520  It might relate to the network where might up to 10mins.
521 521  
348 +== 7.4 Onboarding – Bad Gaterway ==
522 522  
523 -===== 7.4 Onboarding – Bad Gaterway =====
524 -
525 525  [[image:1651832583790-633.png]]
526 526  
527 527  This is caused by the process leads too long which just need to refresh the page.
528 528  
354 +== 7.5 Onboarding ~-~- Why did QR Code generate is aways fail? ==
529 529  
530 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
531 -
532 532  [[image:image-20220506182424-3.png]]
533 533  
534 534  (((
... ... @@ -535,9 +535,8 @@
535 535  This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
536 536  )))
537 537  
362 +== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? ==
538 538  
539 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
540 -
541 541  [[image:1651832742262-209.png||height="297" width="365"]]
542 542  
543 543  (((
... ... @@ -544,9 +544,8 @@
544 544  Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
545 545  )))
546 546  
370 +== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code ==
547 547  
548 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
549 -
550 550  [[image:1651832811038-780.png||height="462" width="216"]]
551 551  
552 552  (((
... ... @@ -553,9 +553,8 @@
553 553  If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
554 554  )))
555 555  
378 +== 7.8 Onboarding – MAC address is being refreshed after scan QR Code ==
556 556  
557 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
558 -
559 559  (((
560 560  After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
561 561  )))
... ... @@ -566,24 +566,21 @@
566 566  
567 567  [[image:1651832880009-473.png]]
568 568  
390 +== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ ==
569 569  
570 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
571 -
572 572  This is caused by the server connection delay, which does not affect the normal use.
573 573  
574 574  [[image:1651832959907-357.png]]
575 575  
396 +== 7.10 Mobile APP crash after scan the QR Code? ==
576 576  
577 -===== 7.10 Mobile APP crash after scan the QR Code? =====
578 -
579 579  * Make sure you have input the correct Wallet address to generate QR Code.
580 580  * Make sure your mobile app uses the same wallet address as the one to generate QR Code.
581 581  * Make sure your mobile app’s relevant permission are enabled.
582 582  * Known: The Android 11 version may cause this kind of issue.
583 583  
403 +== 7.11 Why the frequency/region is not the same what I purchased? ==
584 584  
585 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
586 -
587 587  (((
588 588  Each HP0D is inspected and configured prior to shipping.
589 589  )))
... ... @@ -592,9 +592,8 @@
592 592  If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
593 593  )))
594 594  
413 +== 7.12 Can use the frequency to a region where is not support? ==
595 595  
596 -===== 7.12 Can use the frequency to a region where is not support? =====
597 -
598 598  (((
599 599  Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
600 600  )))
... ... @@ -603,14 +603,12 @@
603 603  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
604 604  )))
605 605  
423 +== 7.13 Can change the frequency of the HP0D Miner? ==
606 606  
607 -===== 7.13 Can change the frequency of the HP0D Miner? =====
608 -
609 609  We do not recommend doing this, it may damage your device
610 610  
427 += 8. Supports =
611 611  
612 -==== 8. Supports ====
613 -
614 614  (((
615 615  If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
616 616  )))
... ... @@ -619,9 +619,8 @@
619 619  With your question as detail as possible. We will reply and help you in the shortest.
620 620  )))
621 621  
437 += 9. Order Info =
622 622  
623 -==== 9. Order Info ====
624 -
625 625  **HP0D-XXX**
626 626  
627 627  **XXX**: Frequency Band
... ... @@ -629,9 +629,8 @@
629 629  * 868: For Bands: EU868,IN865
630 630  * 915: For Bands: US915,AU915,AS923,KR920
631 631  
446 += 10. Manufacturer Info =
632 632  
633 -==== 10. Manufacturer Info ====
634 -
635 635  (((
636 636  **Shenzhen Dragino Technology Development co. LTD**
637 637  )))
... ... @@ -644,9 +644,8 @@
644 644  LongCheng Street, LongGang District ; Shenzhen 518116,China
645 645  )))
646 646  
460 += 11. FCC Warning =
647 647  
648 -==== 11. FCC Warning ====
649 -
650 650  (((
651 651  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
652 652  )))
... ... @@ -668,17 +668,9 @@
668 668  )))
669 669  
670 670  (((
671 -
672 -)))
673 -
674 -(((
675 675  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
676 676  )))
677 677  
678 678  (((
679 -
680 -)))
681 -
682 -(((
683 683  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
684 684  )))