Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.10
edited by Xiaoling
on 2022/05/07 15:23
Change comment: There is no comment for this version
To version 14.1
edited by Xiaoling
on 2022/05/06 10:39
Change comment: Uploaded new attachment "1651804782523-623.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,131 +1,76 @@
1 1  
2 2  
3 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
4 +
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
6 +[[image:1651802206983-860.png]]
5 5  
6 6  
7 -(((
9 +
10 +
8 8  **HP0D Full Hotspot for Helium User Manual**
9 -)))
10 10  
13 +[[image:1651802187690-980.png]]
11 11  
15 +Document Version: 1.1
12 12  
13 13  
18 +|**Version**|**Description**|**Date**
19 +|1.0|Release|2022-Apr-8
20 +|1.1|Add trouble shootings|2022-Apr-24
21 +| | |
22 +| | |
23 +| | |
24 +| | |
14 14  
15 -{{toc/}}
16 16  
17 17  
18 -==== 1. Introduction ====
19 19  
20 -===== 1.1 What is HP0D =====
21 21  
22 -(((
23 -(((
24 -(((
25 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 -)))
27 -)))
28 -)))
29 29  
30 -(((
31 -(((
32 -(((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
34 -)))
35 -)))
36 -)))
31 +~1. Introduction
37 37  
38 -(((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
42 -)))
43 -)))
44 -)))
33 + 1.1 What is HP0D
45 45  
46 -(((
47 -(((
48 -(((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 -)))
51 -)))
52 -)))
35 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
53 53  
54 -(((
55 -(((
56 -(((
57 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 -)))
59 -)))
60 -)))
37 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol. HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
61 61  
39 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR  Code to onboarding HP0D when it arrives.
62 62  
63 -===== 1.2 Specifications =====
41 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
64 64  
65 -(((
66 -(((
67 -**~ Hardware System:**
68 -)))
69 -)))
70 70  
71 -(((
72 -(((
44 +
45 +
46 +1.
47 +11. Specifications
48 +
49 +**Hardware System:**
50 +
73 73   Linux Part:
74 -)))
75 -)))
76 76  
77 -* (((
78 -(((
79 -Raspberry Pi 4
80 -)))
81 -)))
53 +* Raspberry Pi 4
82 82  
83 -(((
84 -(((
85 -**~ Interface:**
86 -)))
87 -)))
88 88  
89 -* (((
90 -(((
91 -10M/100M RJ45 Ports x 1
92 -)))
93 -)))
94 -* (((
95 -(((
96 -LoRaWAN Wireless
97 -)))
98 -)))
99 -* (((
100 -(((
101 -Power Input: 12V 2A, DC
102 -)))
103 -)))
56 +**Interface:**
104 104  
105 -(((
106 -(((
107 -**~ Operating Condition:**
108 -)))
109 -)))
58 +* 10M/100M RJ45 Ports x 1
59 +* LoRaWAN Wireless
60 +* Power Input: 12V 2A, DC
110 110  
111 -* (((
112 -(((
113 -Work Temperature: -20 ~~ 65°C
114 -)))
115 -)))
116 -* (((
117 -(((
118 -Storage Temperature: -20 ~~ 65°C
119 -)))
120 -)))
121 -* (((
122 -(((
123 -Power Input: 12V 2A, DC
124 -)))
125 -)))
126 126  
127 -===== 1.3 Features =====
63 +**Operating Condition:**
128 128  
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 +* Power Input: 12V 2A, DC
68 +
69 +
70 +
71 +
72 +*
73 +*1. Features
129 129  * Open-Source Linux system
130 130  * RPi4 with 2G /4G or 8G RAM
131 131  * Managed by Web GUI, SSH via Internet
... ... @@ -141,487 +141,371 @@
141 141  * Include prepaid $40 onboarding cost and $10 location cost.
142 142  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
143 143  
144 -===== 1.4 Label info and login name =====
145 145  
146 146  
147 -[[image:1651803959860-394.png||height="500" width="375"]]
148 148  
149 -(((
150 -(((
92 +
93 +
94 +1.
95 +11. Label info and login name
96 +
97 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
98 +
99 +
151 151  **Label information:**
152 -)))
153 -)))
154 154  
155 -(((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
158 -)))
159 -)))
160 160  
161 -(((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 -)))
165 -)))
103 +**Device host name//~://**// dragino-xxxxxx//
166 166  
167 -(((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
170 -)))
171 -)))
105 +**Band**//:                             US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864//
172 172  
173 -(((
174 -(((
175 -**Miner address**:          112xxxxxx
176 -)))
177 -)))
107 +**//Miner animal name//**//: xxx-xxx-xxx//
178 178  
179 -(((
180 -(((
181 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
182 -)))
183 -)))
109 +**//Miner address//**//:          112xxxxxx//
184 184  
185 -(((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 -)))
189 -)))
111 +**Eth MAC address**//: A8: 40: 41: EF: FE: CD//
190 190  
191 -(((
192 -(((
193 -**SN**:  device serial number.
194 -)))
195 -)))
113 +**Login**//:                         root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)//
196 196  
115 +**SN**//: device serial number.//
197 197  
198 -==== 2. Quick Start & Onboarding ====
199 199  
200 -(((
201 -(((
202 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 -)))
204 -)))
205 205  
206 -(% class="wikigeneratedid" id="H-2" %)
207 -(((
208 -
209 -)))
210 210  
211 -===== 2.1  Connect HP0D Web UI =====
120 +1. Quick Start & Onboarding
212 212  
213 -====== 2.1.1 via HP0D’s Access Point. ======
122 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
214 214  
215 -(((
216 -(((
124 +
125 +1.
126 +11. Connect HP0D Web UI
127 +111. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]] via HP0D’s Access Point.
128 +
217 217  At the first boot of HP0D, it will auto generate a Wi-Fi network
218 218  
219 -[[image:1651804327535-321.png||height="325" width="199"]]
220 -)))
221 -)))
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
228 228  
229 -(((
230 -(((
231 -(% class="box infomessage" %)
232 -(((
233 - called           : **//HPD-dragino-xxxxxx//**
234 -)))
235 -)))
236 -)))
237 237  
238 -(((
239 -(((
240 -(% class="box infomessage" %)
241 -(((
242 - with password:  **//dragino+dragino//**
243 -)))
244 -)))
245 -)))
246 246  
247 -(((
248 -(((
249 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 -)))
251 -)))
135 + called           : **//HPD-dragino-xxxxxx//**
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
137 +with password:  **//dragino+dragino//**
254 254  
255 255  
256 -====== 2.1.2 Connect via HP0D hostname ======
257 257  
258 -(((
259 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
141 +You can use a PC to connect to this Wi-Fi network. The PC will
260 260  
261 -Like: __**//http:~/~/dragino-4ba54a//**__
262 -)))
143 +get an IP address 10.130.1.xxx and the HP0D has the default
263 263  
264 -[[image:1651804629009-699.png]]
145 +IP 10.130.1.1
265 265  
266 266  
267 -====== 2.1.3 Connect via Ethernet Port ======
148 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
268 268  
269 -(((
270 -(((
150 +
151 +
152 +
153 +1.
154 +11.
155 +111. Connect via HP0D hostname
156 +
157 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
158 +
159 +PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
160 +
161 +Web-UI via HP0D’s hostname.
162 +
163 +
164 +Like: **//http:~/~/dragino-4ba54a//**
165 +
166 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
167 +
168 +
169 +1.
170 +11.
171 +111. Connect via Ethernet Port
172 +
173 +
271 271  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
272 -)))
273 -)))
274 274  
275 -(((
276 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
277 -)))
278 278  
279 -[[image:1651804782523-623.png]]
177 +If you get the IP address form route, like~:// **10.130.2.42**,// you can use this IP address to connect the WEB UI or SSH access of HP0D.
280 280  
179 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
281 281  
282 -===== 2.2 Generate QR Code =====
283 283  
284 -(((
182 +
183 +1.
184 +11. Generate QR Code
185 +
285 285  Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
286 -)))
287 287  
288 -(((
289 289  Note: After onboarding, this wallet will become owner of this hotspot.
290 -)))
291 291  
292 -[[image:image-20220506140312-1.png||height="435" width="438"]]
190 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
293 293  
294 294  
295 -===== 2.3 Onboarding Hotspot =====
296 296  
297 -(((
298 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
299 -)))
300 300  
301 -(((
195 +1.
196 +11. Onboarding Hotspot
197 +1. Download the Helium Hotspot APP from the Apple or Google Play store.
198 +
302 302  Note: the APP version need to be greater than 3.11.
303 303  
304 -
305 -)))
306 306  
307 -(((
308 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
309 -)))
202 +1. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.jpg]]
203 +To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
310 310  
311 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
312 312  
206 +1. Scan the QR Code you generated in the previous step.
313 313  
314 -3. Scan the QR Code you generated in the previous step.
208 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
315 315  
316 -[[image:1651828211026-220.png||height="405" width="191"]]
317 317  
211 +1. Onboarding your device
318 318  
319 -4. Onboarding your device
213 +Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
320 320  
321 -(((
322 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue. 
323 -)))
215 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
324 324  
325 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
326 326  
327 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
218 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
328 328  
329 329  
330 -5. Check onboarding status
331 331  
222 +
223 +1. Check onboarding status
224 +
332 332  You can check from mobile:
333 333  
334 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
227 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
335 335  
336 336  You can also see the hotspot status in below link:
337 337  
338 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
231 +https:~/~/explorer.helium.com/hotspots/**//<YOUR_HOTSPORT_KEY>//**
339 339  
340 340  Example:
341 341  
342 342  Green Synced means hotspot works normal.
343 343  
344 -[[image:1651828427715-679.png||height="374" width="635"]]
237 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
345 345  
346 346  
347 -===== 2.4 Set the Port Forwarding =====
348 348  
349 -(((
350 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
351 -)))
352 352  
353 -[[image:1651828514449-658.png]]
354 354  
355 -(((
356 -
357 -)))
243 +1.
244 +11. Set the Port Forwarding
358 358  
359 -(((
246 +
247 +Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
248 +
249 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
250 +
251 +
360 360  Note: Please refer to more detailed Settings
361 -)))
362 362  
363 -(((
364 364  [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
365 -)))
366 366  
367 -(((
368 368  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
369 -)))
370 370  
371 371  
372 -==== 3. Check the configuration of HP0D ====
373 373  
374 -===== 3.1 LoRa frequency configuration =====
375 375  
376 -[[image:1651828687205-178.png||height="323" width="657"]]
377 377  
262 +1. Check the configuration of HP0D
263 +11. LoRa frequency configuration
378 378  
379 -===== 3.2 Check the LoRaWAN serveraddress =====
380 380  
381 -[[image:1651828703680-156.png||height="349" width="672"]]
266 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
382 382  
268 +1.
269 +11. Check the LoRaWAN serveraddress.
383 383  
384 -===== 3.3 Check Miner configuration =====
271 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
385 385  
386 -[[image:image-20220506181408-1.png||height="451" width="513"]]
387 387  
388 -(((
389 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**
390 -)))
391 391  
392 392  
393 -==== 4. Installation of Antenna ====
394 394  
395 -(((
396 -HP0D use Fiber Glass Antenna.
397 -)))
398 398  
399 -[[image:1651832158606-882.png]]
400 400  
401 -(((
402 -
403 -)))
404 404  
405 -(((
406 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
407 -)))
408 408  
409 -(((
410 -[[image:1651832205608-998.png||height="349" width="198"]]
411 -)))
281 +1.
282 +11. Check Miner configuration
412 412  
413 -==== 5. SSH Access for Linux console ====
284 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
414 414  
415 -(((
416 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
417 -)))
286 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
418 418  
419 -(((
420 -Port:         22
421 -)))
422 422  
423 -(((
424 -User Name:      **root**
425 -)))
426 426  
427 -(((
428 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
429 -)))
430 430  
431 -(((
432 -After logging in, you will be in the Linux console and can enter commands as shown below.
433 -)))
434 434  
435 -[[image:1651832284160-991.png]]
292 +1. Installation of Antenna
436 436  
294 +HP0D use Fiber Glass Antenna.
437 437  
438 -==== **6. How to change the Wireless function of HP0D** ====
296 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
439 439  
440 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
298 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
441 441  
442 -===== **6.1 Access the Linux console.** =====
443 443  
444 -Follow the previous step of Step 5.
301 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
445 445  
446 446  
447 -===== 6.2 Install the package of network-manager. =====
448 448  
449 -Run commands:
450 450  
451 -(% class="box infomessage" %)
452 -(((
453 - apt update
454 - apt install network-manager
455 -)))
456 456  
457 -[[image:image-20220507140730-1.png]]
307 +1. SSH Access for Linux console
458 458  
309 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
459 459  
460 -===== 6.3 Reboot the device. =====
311 +Port:         22
461 461  
462 -Run command:
313 +User Name:      **root**
463 463  
464 -(% class="box infomessage" %)
465 -(((
466 - reboot
467 -)))
315 +Password:         **Randomly generated （found on device’s label ）**
468 468  
469 -[[image:image-20220507140814-2.png]]
470 470  
471 -===== 6.4 Check the wireless type =====
318 +After logging in, you will be in the Linux console and can enter commands as shown below.
472 472  
473 -Run command:
320 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
474 474  
475 -(% class="box infomessage" %)
476 -(((
477 - iw dev
478 -)))
479 479  
480 -[[image:image-20220507140941-3.png]]
481 481  
482 -===== 6.5 Connect the WiFi. =====
483 483  
484 -Run command:
325 +1. Trouble Shootings
326 +11. How to get a wallet address?
485 485  
486 -(% class="box infomessage" %)
487 -(((
488 - nmtui
489 -)))
328 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
490 490  
491 -[[image:image-20220507140953-4.png]]
492 492  
331 +1.
332 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
493 493  
494 -==== 7. Trouble Shootings ====
495 495  
496 -===== 7.1 How to get a wallet address? =====
335 +//User can login the HP0D, able to access other Web Pages except miner page//
497 497  
498 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
499 499  
338 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
500 500  
501 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
502 502  
503 -(((
504 -User can login the HP0D, able to access other Web Pages except miner page.
505 -)))
341 +1.
342 +11. Onboarding ~-~- Some parameters in miner page show timeout
506 506  
507 -(((
508 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
509 -)))
344 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
510 510  
346 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
511 511  
512 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
348 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
513 513  
514 -[[image:image-20220506182042-2.png||height="250" width="516"]]
350 +//It might relate to the network where might up to 10mins//
515 515  
516 -[[image:1651832455372-647.png||height="224" width="520"]]
517 517  
518 -HP0D is establish connection to Helium server and not finished. And you might see above.
353 +1.
354 +11. Onboarding – Bad Gaterway
519 519  
520 -It might relate to the network where might up to 10mins.
356 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
521 521  
358 +//This is caused by the process leads too long which just need to refresh the page.//
522 522  
523 -===== 7.4 Onboarding – Bad Gaterway =====
524 524  
525 -[[image:1651832583790-633.png]]
361 +1.
362 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
526 526  
527 -This is caused by the process leads too long which just need to refresh the page.
364 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
528 528  
366 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
529 529  
530 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
531 531  
532 -[[image:image-20220506182424-3.png]]
369 +1.
370 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
533 533  
534 -(((
535 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.
536 -)))
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
537 537  
374 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
538 538  
539 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
540 540  
541 -[[image:1651832742262-209.png||height="297" width="365"]]
377 +1.
378 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
542 542  
543 -(((
544 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
545 -)))
380 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
546 546  
382 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
547 547  
548 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
549 549  
550 -[[image:1651832811038-780.png||height="462" width="216"]]
385 +1.
386 +11. Onboarding – MAC address is being refreshed after scan QR Code
551 551  
552 -(((
553 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,please contact us to help you solve.
554 -)))
388 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
555 555  
556 556  
557 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
391 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
558 558  
559 -(((
560 -After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.
561 -)))
393 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
562 562  
563 -(((
564 -If you don’t see MAC address, make sure your mobile has good internet connection.
565 -)))
566 566  
567 -[[image:1651832880009-473.png]]
568 568  
569 569  
570 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
398 +1.
399 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
571 571  
572 -This is caused by the server connection delay, which does not affect the normal use.
401 +//This is caused by the server connection delay, which does not affect the normal use.//
573 573  
574 -[[image:1651832959907-357.png]]
403 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
575 575  
576 576  
577 -===== 7.10 Mobile APP crash after scan the QR Code? =====
406 +*
407 +*1. Mobile APP crash after scan the QR Code?
408 +* //Make sure you have input the correct Wallet address to generate QR Code.//
409 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
410 +* //Make sure your mobile app’s relevant permission are enabled.//
411 +* //Known: The Android 11 version may cause this kind of issue.//
578 578  
579 -* Make sure you have input the correct Wallet address to generate QR Code.
580 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
581 -* Make sure your mobile app’s relevant permission are enabled.
582 -* Known: The Android 11 version may cause this kind of issue.
583 583  
414 +1.
415 +11. Why the frequency/region is not the same what I purchased?
584 584  
585 -===== 7.11 Why the frequency/region is not the same what I purchased? =====
417 +//Each HP0D is inspected and configured prior to shipping.//
586 586  
587 -(((
588 -Each HP0D is inspected and configured prior to shipping.
589 -)))
419 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
590 590  
591 -(((
592 -If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.
593 -)))
594 594  
422 +1.
423 +11. Can use the frequency to a region where is not support?
595 595  
596 -===== 7.12 Can use the frequency to a region where is not support? =====
425 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
597 597  
598 -(((
599 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
600 -)))
601 -
602 -(((
603 603  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
604 -)))
605 605  
606 606  
607 -===== 7.13 Can change the frequency of the HP0D Miner? =====
430 +1.
431 +11. Can change the frequency of the HP0D Miner?
608 608  
609 -We do not recommend doing this, it may damage your device
433 +//We do not recommend doing this, it may damage your device//
610 610  
611 611  
612 -==== 8. Supports ====
613 613  
614 -(((
615 -If you are experiencing issues and can’t solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
616 -)))
617 617  
618 -(((
619 -With your question as detail as possible. We will reply and help you in the shortest.
620 -)))
621 621  
439 +1. Supports
622 622  
623 -==== 9. Order Info ====
624 624  
442 +//If you are experiencing issues and can’t solve, you can send mail to//
443 +
444 +[[//support@dragino.com//>>mailto:support@dragino.com]]
445 +
446 +//With your question as detail as possible. We will reply and help you in the shortest.//
447 +
448 +
449 +
450 +
451 +1. Order Info
452 +
453 +
625 625  **HP0D-XXX**
626 626  
627 627  **XXX**: Frequency Band
... ... @@ -630,55 +630,32 @@
630 630  * 915: For Bands: US915,AU915,AS923,KR920
631 631  
632 632  
633 -==== 10. Manufacturer Info ====
634 634  
635 -(((
463 +1. Manufacturer Info
464 +
636 636  **Shenzhen Dragino Technology Development co. LTD**
637 -)))
638 638  
639 -(((
640 640  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
641 -)))
642 642  
643 -(((
644 644  LongCheng Street, LongGang District ; Shenzhen 518116,China
645 -)))
646 646  
647 647  
648 -==== 11. FCC Warning ====
472 +1. FCC Warning
649 649  
650 -(((
651 651  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
652 -)))
653 653  
654 -(((
655 655  ~-~- Reorient or relocate the receiving antenna.
656 -)))
657 657  
658 -(((
659 659  ~-~- Increase the separation between the equipment and receiver.
660 -)))
661 661  
662 -(((
663 663  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
664 -)))
665 665  
666 -(((
667 667  ~-~- Consult the dealer or an experienced radio/TV technician for help.
668 -)))
669 669  
670 -(((
671 -
672 -)))
673 673  
674 -(((
675 675  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
676 -)))
677 677  
678 -(((
679 -
680 -)))
681 681  
682 -(((
683 683  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
684 -)))
489 +
490 +
1651816940275-371.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -169.8 KB
Content
1651817186037-899.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -109.2 KB
Content
1651817194458-938.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.0 KB
Content
1651817207344-111.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.4 KB
Content
1651817529289-461.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
1651828211026-220.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.4 KB
Content
1651828250802-391.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
1651828262668-768.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
1651828391664-884.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.4 KB
Content
1651828401011-970.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.0 KB
Content
1651828427715-679.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -538.6 KB
Content
1651828514449-658.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.1 KB
Content
1651828687205-178.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.6 KB
Content
1651828703680-156.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -113.7 KB
Content
1651829241318-427.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651829292719-315.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651829385186-114.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651829783380-920.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651829907019-256.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651830026619-866.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506140312-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.3 KB
Content
image-20220506141159-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
image-20220506172609-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.1 KB
Content
image-20220506173610-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20220506173921-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content