Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.1
edited by Edwin Chen
on 2022/05/07 14:12
Change comment: There is no comment for this version
To version 109.1
edited by Kilight Cao
on 2022/06/09 10:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -1,196 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
9 -)))
10 10  
11 -
12 -
13 -
14 -
15 -{{toc/}}
16 -
17 -
18 -==== 1. Introduction ====
19 -
20 -===== 1.1 What is HP0D =====
21 -
22 -(((
23 -(((
24 -(((
25 - The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 - Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 - at low data rates.
38 -)))
39 -)))
40 -)))
41 -
42 -(((
43 -(((
44 -(((
45 45  
46 46  )))
47 -)))
48 -)))
49 49  
50 -(((
51 -(((
52 -(((
53 - HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
54 -)))
55 -)))
11 +**Table of Contents：**
56 56  
57 -(((
58 -(((
59 - ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
60 -)))
61 -)))
13 +{{toc/}}
62 62  
63 -(((
64 -(((
65 - packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
66 -)))
67 -)))
68 68  
69 -(((
70 -(((
71 - HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
72 -)))
73 -)))
74 -)))
16 += **1. Introduction** =
75 75  
76 -(((
77 -(((
78 -(((
79 -**~ and connects max 2 x LoRaWAN servers at the same time**.
80 -)))
81 -)))
82 -)))
18 +== **1.1 What is HP0D** ==
83 83  
84 84  (((
85 -(((
86 -(((
87 -
21 +The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
88 88  )))
89 -)))
90 -)))
91 91  
92 92  (((
93 -(((
94 -(((
95 -**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
96 96  )))
97 -)))
98 98  
99 99  (((
100 -(((
101 - for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
102 102  )))
103 -)))
104 -)))
105 105  
106 106  (((
107 -(((
108 -(((
109 -
33 +HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
110 110  )))
111 -)))
112 -)))
113 113  
114 -(((
115 -(((
116 -(((
117 - HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
118 -)))
119 -)))
36 +== **1.2 Specifications** ==
120 120  
121 -(((
122 -(((
123 - customize the frequency bands to use in their own LoRaWAN network.
124 -)))
125 -)))
126 -)))
127 -
128 -
129 -===== 1.2 Specifications =====
130 -
131 -(((
132 -(((
133 133  **~ Hardware System:**
134 -)))
135 -)))
136 -
137 -(((
138 -(((
139 139   Linux Part:
140 -)))
141 -)))
142 142  
143 -* (((
144 -(((
145 -Raspberry Pi 4
146 -)))
147 -)))
41 +* Raspberry Pi 4
148 148  
149 -(((
150 -(((
151 151  **~ Interface:**
152 -)))
153 -)))
154 154  
155 -* (((
156 -(((
157 -10M/100M RJ45 Ports x 1
158 -)))
159 -)))
160 -* (((
161 -(((
162 -LoRaWAN Wireless
163 -)))
164 -)))
165 -* (((
166 -(((
167 -Power Input: 12V 2A, DC
168 -)))
169 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
170 170  
171 -(((
172 -(((
173 173  **~ Operating Condition:**
174 -)))
175 -)))
176 176  
177 -* (((
178 -(((
179 -Work Temperature: -20 ~~ 65°C
180 -)))
181 -)))
182 -* (((
183 -(((
184 -Storage Temperature: -20 ~~ 65°C
185 -)))
186 -)))
187 -* (((
188 -(((
189 -Power Input: 12V 2A, DC
190 -)))
191 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
192 192  
193 -===== 1.3 Features =====
55 +== **1.3 Features** ==
194 194  
195 195  * Open-Source Linux system
196 196  * RPi4 with 2G /4G or 8G RAM
... ... @@ -207,610 +207,635 @@
207 207  * Include prepaid $40 onboarding cost and $10 location cost.
208 208  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
209 209  
210 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
211 211  
212 -
213 213  [[image:1651803959860-394.png||height="500" width="375"]]
214 214  
215 215  
216 216  
217 -(((
218 -(((
219 -**~ Label information:**
220 -)))
221 -)))
78 +=== 1.4.1 Label information: ===
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
228 228  
229 -(((
230 -(((
231 -**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
232 -)))
233 -)))
234 234  
235 -(((
236 -(((
237 -**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
238 -)))
239 -)))
89 += **2. Quick Start & Onboarding** =
240 240  
241 -(((
242 -(((
243 -**~ Miner animal name**: xxx-xxx-xxx
244 -)))
245 -)))
91 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
246 246  
247 -(((
248 -(((
249 -**~ Miner address**:          112xxxxxx
250 -)))
251 -)))
252 252  
253 -(((
254 -(((
255 -**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
256 -)))
257 -)))
94 +== **2.1  Connect HP0D Web UI** ==
258 258  
259 -(((
260 -(((
261 -**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
262 -)))
263 -)))
96 +=== **2.1.1 via HP0D’s Access Point** ===
264 264  
265 -(((
266 -(((
267 -**~ SN**:  device serial number.
268 -)))
269 -)))
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
270 270  
271 271  
272 -==== 2. Quick Start & Onboarding ====
101 +[[image:1651804327535-321.png||height="325" width="199"]]
273 273  
103 +
104 +(% class="box infomessage" %)
274 274  (((
275 -(((
276 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
106 + called  : **//HPD-dragino-xxxxxx//**
277 277  )))
278 -)))
279 279  
280 -(% class="wikigeneratedid" id="H-2" %)
109 +(% class="box infomessage" %)
281 281  (((
282 -
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
283 283  )))
284 284  
285 -===== 2.1  Connect HP0D Web UI =====
286 286  
287 -====== 2.1.1 via HP0D’s Access Point. ======
116 +[[image:1651804397792-591.png||height="386" width="733"]]
288 288  
289 -(((
290 -(((
291 - At the first boot of HP0D, it will auto generate a Wi-Fi network
292 292  
293 -[[image:1651804327535-321.png||height="325" width="199"]]
294 -)))
295 -)))
119 +=== **2.1.2 Connect via HP0D hostname** ===
296 296  
297 -(((
298 -(((
299 -
300 -)))
301 -)))
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
302 302  
303 -(((
304 -(((
305 -(% class="box infomessage" %)
306 -(((
307 - called           : **//HPD-dragino-xxxxxx//**
308 -)))
309 -)))
310 -)))
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
311 311  
312 -(((
313 -(((
314 -(% class="box infomessage" %)
315 -(((
316 - with password:  **//dragino+dragino//**
317 -)))
318 -)))
319 -)))
320 320  
126 +[[image:1651804629009-699.png]]
127 +
128 +=== **2.1.3 Connect via Ethernet Port** ===
129 +
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 +
132 +
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 +
135 +
136 +[[image:1651804782523-623.png]]
137 +
138 +
139 +== **2.2 Generate QR Code** ==
140 +
141 +
321 321  (((
322 -(((
323 -
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
324 324  )))
325 -)))
326 326  
327 327  (((
328 -(((
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
329 329  
330 330  )))
331 -)))
332 332  
333 -(((
334 -(((
335 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
336 -)))
337 -)))
152 +[[image:image-20220506140312-1.png||height="435" width="438"]]
338 338  
339 -[[image:1651804397792-591.png||height="402" width="763"]]
340 340  
155 +== **2.3 Onboarding Hotspot** ==
341 341  
342 342  
343 -====== 2.1.2 Connect via HP0D hostname ======
344 -
345 345  (((
346 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
347 347  )))
348 348  
349 349  (((
350 - PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
163 +**//Note: the APP version needs to be greater than 3.11.//**
164 +
165 +
351 351  )))
352 352  
353 353  (((
354 - Web-UI via HP0D’s hostname.
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 +
171 +
355 355  )))
356 356  
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
357 357  
358 - Like: __**//http:~/~/dragino-4ba54a//**__
359 359  
177 +//**3. **Scan the QR Code you generated in the previous step.//
360 360  
361 -(% style="text-align:center" %)
362 -[[image:1651804629009-699.png]]
179 +[[image:1651828211026-220.png||height="405" width="191"]]
363 363  
364 364  
365 -====== 2.1.3 Connect via Ethernet Port ======
366 -
367 367  (((
368 -(((
369 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
183 +//**4. **Onboarding your device//
370 370  )))
371 -)))
372 372  
373 373  (((
374 -(((
375 - router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
376 -)))
377 -)))
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
378 378  
379 -(((
380 380  
381 381  )))
382 382  
383 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
384 384  
385 - or SSH access of HP0D.
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
386 386  
387 -(% style="text-align:center" %)
388 -[[image:1651804782523-623.png]]
389 389  
197 +**5. **//Check onboarding status where you can check from mobile~://
390 390  
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
391 391  
392 -===== 2.2 Generate QR Code =====
393 393  
394 -(((
395 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
396 -)))
202 +//You can also see the hotspot status in the below link~://
397 397  
398 -(((
399 - Note: After onboarding, this wallet will become owner of this hotspot.
400 -)))
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
401 401  
402 -(% style="text-align:center" %)
403 -[[image:image-20220506140312-1.png||height="435" width="438"]]
206 +//Example~://
404 404  
405 405  
406 -===== 2.3 Onboarding Hotspot =====
209 +**//Green Synced means hotspot works normally.//**
407 407  
211 +[[image:1651828427715-679.png||height="374" width="635"]]
212 +
213 +
214 +== **2.4 Set the Port Forwarding** ==
215 +
216 +
408 408  (((
409 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
410 410  )))
411 411  
221 +[[image:1651828514449-658.png]]
222 +
412 412  (((
413 - Note: the APP version need to be greater than 3.11.
224 +
414 414  )))
415 415  
416 416  (((
417 -
228 +Note: Please refer to more detailed Settings
418 418  )))
419 419  
420 420  (((
421 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
422 422  )))
423 423  
424 424  (((
425 - the ‘DRAGINO Miner HP0D’
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
238 +
426 426  )))
427 427  
428 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
241 += **3. Check the configuration of HP0D** =
429 429  
430 - 3. Scan the QR Code you generated in the previous step.
243 +== **3.1 LoRa frequency configuration** ==
431 431  
432 -(% style="text-align:center" %)
433 -[[image:1651828211026-220.png||height="405" width="191"]]
434 434  
435 - 4. Onboarding your device
246 +[[image:1651828687205-178.png||height="323" width="657"]]
436 436  
437 - Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
438 438  
439 - mobile to onboarding server might have issue.
249 +== **3.2 Check the LoRaWAN Server Address** ==
440 440  
441 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
442 442  
443 - [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
252 +[[image:image-20220607160428-1.png||height="472" width="654"]]
444 444  
445 445  
446 -5. Check onboarding status
255 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
447 447  
448 - You can check from mobile:
257 +[[image:image-20220607161130-2.png||height="501" width="1112"]]
449 449  
450 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
259 +[[image:image-20220607161603-3.png||height="557" width="1113"]]
451 451  
452 - You can also see the hotspot status in below link:
261 +[[image:image-20220607161812-4.png||height="699" width="1115"]]
453 453  
454 - https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
455 455  
456 - Example:
264 +[[image:image-20220607162635-5.png||height="339" width="1110"]]
457 457  
458 - Green Synced means hotspot works normal.
266 +[[image:image-20220607162859-6.png]]
459 459  
460 -(% style="text-align:center" %)
461 -[[image:1651828427715-679.png||height="374" width="635"]]
268 +== **3.3 Check Miner configuration** ==
462 462  
463 463  
464 -===== 2.4 Set the Port Forwarding =====
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
465 465  
466 466  (((
467 - Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 +
276 +
277 +== **//3.4 Check the Miner state//** ==
278 +
279 +
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 +
282 +
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
284 +
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
289 +
468 468  )))
469 469  
292 += **4. Installation of Antenna** =
293 +
294 +
470 470  (((
471 - it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
296 +//HP0D uses Fiber Glass Antenna.//
472 472  )))
473 473  
299 +[[image:1651832158606-882.png]]
300 +
474 474  (((
475 - you may have.
302 +
476 476  )))
477 477  
478 -(% style="text-align:center" %)
479 -[[image:1651828514449-658.png]]
305 +(((
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 +)))
480 480  
481 481  (((
310 +[[image:1651832205608-998.png||height="349" width="198"]]
311 +
482 482  
483 483  )))
484 484  
315 += **5. SSH Access for Linux console** =
316 +
317 +
318 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
319 +
320 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
321 +
322 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
323 +
324 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
325 +
326 +
327 +Below are screenshots:
328 +
329 +[[image:image-20220608202027-1.png]]
330 +
485 485  (((
486 - Note: Please refer to more detailed Settings
332 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
487 487  )))
488 488  
489 489  (((
490 - [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
336 +//Port:  22//
491 491  )))
492 492  
493 493  (((
494 - [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
340 +//User Name:      (% style="color:green" %)**root**//
495 495  )))
496 496  
343 +(((
344 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
497 497  
498 -==== 3. Check the configuration of HP0D ====
346 +
347 +)))
499 499  
500 -===== 3.1 LoRa frequency configuration =====
349 +(((
350 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
501 501  
502 -(% style="text-align:center" %)
503 -[[image:1651828687205-178.png||height="323" width="657"]]
352 +
353 +)))
504 504  
355 +[[image:image-20220608202118-2.png]]
505 505  
506 506  
507 -===== 3.2 Check the LoRaWAN serveraddress =====
358 += **6. How to change the Wireless function of HP0D** =
508 508  
360 +//The wireless function is configured as AP by default and the web page does not support configuration,//
509 509  
510 -(% style="text-align:center" %)
511 -[[image:1651828703680-156.png||height="349" width="672"]]
362 +//if you want to configure it as STA(client)connection mode,//
512 512  
364 +//you can configure your WiFi info on the** /Network/WiFi **page.//
513 513  
514 -===== 3.3 Check Miner configuration =====
515 515  
516 -(% style="text-align:center" %)
517 -[[image:image-20220506181408-1.png||height="451" width="513"]]
367 +**//Note: the wireless state is as AP//**
518 518  
519 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
369 +[[image:image-20220531170243-5.png||height="469" width="967"]]
520 520  
521 -**~ button of Update, and then wait 10mins to check here,**
522 522  
372 +== **6.1 Access WiFi configuration page** ==
523 523  
524 -==== 4. Installation of Antenna ====
525 525  
526 -(((
527 - HP0D use Fiber Glass Antenna.
528 -)))
375 +[[image:image-20220531165803-2.png]]
529 529  
530 -(% style="text-align:center" %)
531 -[[image:1651832158606-882.png]]
532 532  
533 -(((
534 -
535 -)))
378 +== **6.2 Enter your WiFi information and save** ==
536 536  
537 -(((
538 -
539 -)))
540 540  
541 -(((
542 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
543 -)))
381 +[[image:image-20220531165958-3.png]]
544 544  
545 -(((
546 - to antenna and install as below:
547 -)))
548 548  
549 -(((
550 -(% style="text-align:center" %)
551 -[[image:1651832205608-998.png||height="349" width="198"]]
552 -)))
384 +== **6.3 Change the WiFi mode.** ==
553 553  
554 -==== 5. SSH Access for Linux console ====
555 555  
556 -(((
557 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
558 -)))
387 +[[image:image-20220531170131-4.png]]
559 559  
560 -(((
561 - Port:         22
562 -)))
389 +== **6.4 Wait system to restart** ==
563 563  
564 -(((
565 - User Name:      **root**
566 -)))
567 567  
392 +[[image:image-20220531170501-7.png]]
393 +
394 +
395 +//**Note: When the time remaining is finished it will turn to the home page.**//
396 +
397 +
398 +== **6.5 Check the STA state** ==
399 +
400 +
401 +[[image:image-20220531170705-8.png||height="484" width="990"]]
402 +
403 +
404 += **7. Trouble Shootings** =
405 +
406 +== **7.1 How to get a wallet address?** ==
407 +
408 +
409 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 +
411 +
412 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 +
414 +
568 568  (((
569 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
416 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
570 570  )))
571 571  
572 572  (((
420 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
421 +
573 573  
574 574  )))
575 575  
576 -(((
577 - After logging in, you will be in the Linux console and can enter commands as shown below.
578 -)))
425 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
579 579  
580 -(% style="text-align:center" %)
581 -[[image:1651832284160-991.png]]
582 582  
428 +[[image:image-20220506182042-2.png||height="250" width="516"]]
583 583  
584 -==== **6. How to change the Wireless function of HP0D** ====
430 +[[image:1651832455372-647.png||height="224" width="520"]]
585 585  
586 - // The wireless function is configured as AP by default and the web page does not support configuration, //
587 587  
588 -// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
433 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
589 589  
590 -===== **6.1 Access the Linux console.** =====
435 +**//It might relate to the network which might be up to 10mins.//**
591 591  
592 - Follow the previous step of Step 5.
593 593  
438 +== **7.4 Onboarding – Bad Gateway** ==
594 594  
595 -===== 6.2 Install the package of network-manager. =====
596 596  
597 - Run commands:
441 +[[image:1651832583790-633.png]]
598 598  
599 -(% class="box infomessage" %)
600 -(((
601 - apt update
602 - apt install network-manager
603 -)))
604 604  
605 -[[image:image-20220507140730-1.png]]
444 +//**This is caused by the process leading too long which just needs to refresh the page.**//
606 606  
607 607  
447 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
608 608  
609 -===== 6.3 Reboot the device. =====
610 610  
611 - Run command:
450 +[[image:image-20220506182424-3.png]]
612 612  
613 -(% class="box infomessage" %)
452 +
614 614  (((
615 - reboot
454 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 +
456 +
616 616  )))
617 617  
618 -[[image:image-20220507140814-2.png]]
459 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
619 619  
620 -===== 6.4 Check the wireless type =====
461 +[[image:1651832742262-209.png||height="297" width="365"]]
621 621  
622 - Run command:
623 623  
624 -(% class="box infomessage" %)
625 625  (((
626 - iw dev
465 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 +
467 +
627 627  )))
628 628  
629 -[[image:image-20220507140941-3.png]]
470 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
630 630  
631 -===== 6.5 Connect the WiFi. =====
632 632  
633 - Run command:
473 +[[image:1651832811038-780.png||height="462" width="216"]]
634 634  
635 -(% class="box infomessage" %)
475 +
636 636  (((
637 - nmtui
477 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
478 +
479 +
638 638  )))
639 639  
640 -[[image:image-20220507140953-4.png]]
482 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
641 641  
642 642  
485 +(((
486 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
643 643  
644 -==== 7. Trouble Shootings ====
488 +
489 +)))
645 645  
646 -===== 7.1 How to get a wallet address? =====
491 +(((
492 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
493 +)))
647 647  
648 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
495 +[[image:1651832880009-473.png]]
649 649  
650 650  
651 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
498 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
652 652  
500 +
501 +**//This is caused by the server connection delay, which does not affect the regular use.//**
502 +
503 +[[image:1651832959907-357.png]]
504 +
505 +
506 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
507 +
508 +
509 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 +* //**Make sure your mobile app’s relevant permission is enabled.**//
512 +* //**Known: The Android 11 version may cause this kind of issue.**//
513 +
514 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 +
516 +
653 653  (((
654 - User can login the HP0D, able to access other Web Pages except miner page
518 +//**Each HP0D is inspected and configured prior to shipping.**//
655 655  )))
656 656  
657 657  (((
658 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
522 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
523 +
524 +
659 659  )))
660 660  
527 +== **7.12 Can use the frequency to a region where is no support?** ==
661 661  
662 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
663 663  
664 -(% style="text-align:center" %)
665 -[[image:image-20220506182042-2.png||height="250" width="516"]]
530 +(((
531 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 +)))
666 666  
667 -(% style="text-align:center" %)
668 -[[image:1651832455372-647.png||height="224" width="520"]]
534 +(((
535 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
669 669  
537 +
538 +)))
670 670  
671 - HP0D is establish connection to Helium server and not finished. And you might see above.
540 +== **7.13 Can change the frequency of the HP0D Miner?** ==
672 672  
673 - It might relate to the network where might up to 10mins
674 674  
543 +//We do not recommend doing this, it may damage your device//
675 675  
676 -===== 7.4 Onboarding – Bad Gaterway =====
677 677  
678 -(% style="text-align:center" %)
679 -[[image:1651832583790-633.png]]
546 +== **7.14 Low Reward and not transmit issue** ==
680 680  
681 - This is caused by the process leads too long which just need to refresh the page.
682 682  
549 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
683 683  
684 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
551 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
685 685  
686 -(% style="text-align:center" %)
687 -[[image:image-20220506182424-3.png]]
553 +[[image:image-20220527114519-1.png||height="579" width="851"]]
688 688  
689 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
690 690  
691 - device block height is much lower than the current height as the above picture like '1 1', the QR code
556 +== **7.15 Why is my miner version not the latest** ==
692 692  
693 - generation may fail.
694 694  
559 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
695 695  
696 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
561 +//However, the download and upgrade may fail due to the network.//
697 697  
698 -(% style="text-align:center" %)
699 -[[image:1651832742262-209.png||height="297" width="365"]]
563 +//So **We offer a manual check method:**//
700 700  
701 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
565 + **// Use the "draginoups" command to check//**
702 702  
703 - click the button of ‘Clean’ to re-generate the QR Code.
567 +[[image:image-20220601101358-1.png]]
704 704  
705 705  
706 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
707 707  
708 -(% style="text-align:center" %)
709 -[[image:1651832811038-780.png||height="462" width="216"]]
571 += **8.How to flash OS to SD card** =
710 710  
711 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
712 712  
713 - please contact us to help you solve.
574 +//**Preparations:**//
714 714  
576 +1. //An SD card with 16GB or more//
715 715  
716 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
578 +2. //Download the OS image//
717 717  
718 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
580 +3. //A card reader device//
719 719  
720 - public key/ wallet address to onboarding server. Server will return the match MAC address
582 +4. //A Flash software tool ( Such as balenaEtcher )//
721 721  
722 - for this hotspot.
723 723  
585 +=== **Step 1. Select the OS image that requires flash** ===
724 724  
725 - If you don’t see MAC address, make sure your mobile has good internet connection.
726 726  
727 -(% style="text-align:center" %)
728 -[[image:1651832880009-473.png]]
588 +[[image:image-20220609101843-5.png]]
729 729  
730 730  
731 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
591 +=== **Step 2. Select the target that requires Flash** ===
732 732  
733 - This is caused by the server connection delay, which does not affect the normal use.
734 734  
594 +[[image:image-20220609103538-11.png]]
735 735  
736 -(% style="text-align:center" %)
737 -[[image:1651832959907-357.png]]
596 +[[image:image-20220609101748-3.png]]
738 738  
739 -===== 7.10 Mobile APP crash after scan the QR Code? =====
740 740  
741 -* Make sure you have input the correct Wallet address to generate QR Code.
742 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
743 -* Make sure your mobile app’s relevant permission are enabled.
744 -* Known: The Android 11 version may cause this kind of issue.
599 +=== **Step 3. Flash start** ===
745 745  
746 -1.
747 -11. Why the frequency/region is not the same what I purchased?
748 748  
749 -//Each HP0D is inspected and configured prior to shipping.//
602 +[[image:image-20220609103619-12.png]]
750 750  
751 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
604 +[[image:image-20220609104104-13.png]]
752 752  
753 753  
754 -1.
755 -11. Can use the frequency to a region where is not support?
607 +=== **Flash Complete** ===
756 756  
757 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
758 758  
759 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
610 +[[image:image-20220609104415-1.png]]
760 760  
761 761  
762 -1.
763 -11. Can change the frequency of the HP0D Miner?
613 += **9. OTA Version Info** =
764 764  
765 -//We do not recommend doing this, it may damage your device//
615 +== **When does the OTA update happen?** ==
766 766  
767 767  
618 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
768 768  
620 +== **# 2022/05/14** ==
769 769  
770 770  
771 -1. Supports
623 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
624 +1. //Add postinst after auto-update//
625 +1. //Add Miner version mark.//
626 +1. //Add fast sync if miner GAP is large//
772 772  
773 -//If you are experiencing issues and can’t solve, you can send mail to//
628 +== **# 2022/05/24** ==
774 774  
775 -[[//support@dragino.com//>>mailto:support@dragino.com]]
630 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
776 776  
777 -//With your question as detail as possible. We will reply and help you in the shortest.//
778 778  
633 += **10. Supports** =
779 779  
635 +(((
636 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
637 +)))
780 780  
639 +(((
640 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
781 781  
782 -1. Order Info
642 +
643 +)))
783 783  
784 -**HP0D-XXX**
645 += **11. Order Info** =
785 785  
786 -**XXX**: Frequency Band
647 +(% style="color:#0000ff" %)**HP0D-XXX**
787 787  
788 -* 868: For Bands: EU868,IN865
789 -* 915: For Bands: US915,AU915,AS923,KR920
649 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
790 790  
791 -1. Manufacturer Info
651 +* **AS923**: LoRaWAN AS923 band
652 +* **AU915**: LoRaWAN AU915 band
653 +* **EU868**: LoRaWAN EU868 band
654 +* **KR920**: LoRaWAN KR920 band
655 +* **US915**: LoRaWAN US915 band
656 +* **IN865**: LoRaWAN IN865 band
792 792  
658 += **12. Manufacturer Info** =
659 +
660 +(((
793 793  **Shenzhen Dragino Technology Development co. LTD**
662 +)))
794 794  
664 +(((
795 795  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
666 +)))
796 796  
797 -LongCheng Street, LongGang District ; Shenzhen 518116,China
668 +(((
669 +Longcheng Street, LongGang District; Shenzhen 518116, China
798 798  
799 799  
800 -1. FCC Warning
672 +
673 +)))
801 801  
675 += **13. FCC Warning** =
676 +
677 +(((
802 802  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
679 +)))
803 803  
681 +(((
804 804  ~-~- Reorient or relocate the receiving antenna.
683 +)))
805 805  
685 +(((
806 806  ~-~- Increase the separation between the equipment and receiver.
687 +)))
807 807  
689 +(((
808 808  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
691 +)))
809 809  
693 +(((
810 810  ~-~- Consult the dealer or an experienced radio/TV technician for help.
695 +)))
811 811  
812 -
697 +(((
813 813  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
699 +)))
814 814  
815 -
701 +(((
816 816  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
703 +)))
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content