Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 72.1
edited by Xiaoye
on 2022/05/07 14:10
Change comment: There is no comment for this version
To version 106.1
edited by Kilight Cao
on 2022/06/08 20:21
Change comment: Uploaded new attachment "image-20220608202118-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -1,196 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
9 -)))
10 10  
11 -
12 -
13 -
14 -
15 -{{toc/}}
16 -
17 -
18 -==== 1. Introduction ====
19 -
20 -===== 1.1 What is HP0D =====
21 -
22 -(((
23 -(((
24 -(((
25 - The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 - Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 - at low data rates.
38 -)))
39 -)))
40 -)))
41 -
42 -(((
43 -(((
44 -(((
45 45  
46 46  )))
47 -)))
48 -)))
49 49  
50 -(((
51 -(((
52 -(((
53 - HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
54 -)))
55 -)))
11 +**Table of Contents：**
56 56  
57 -(((
58 -(((
59 - ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
60 -)))
61 -)))
13 +{{toc/}}
62 62  
63 -(((
64 -(((
65 - packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
66 -)))
67 -)))
68 68  
69 -(((
70 -(((
71 - HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
72 -)))
73 -)))
74 -)))
16 += **1. Introduction** =
75 75  
76 -(((
77 -(((
78 -(((
79 -**~ and connects max 2 x LoRaWAN servers at the same time**.
80 -)))
81 -)))
82 -)))
18 +== **1.1 What is HP0D** ==
83 83  
84 84  (((
85 -(((
86 -(((
87 -
21 +The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
88 88  )))
89 -)))
90 -)))
91 91  
92 92  (((
93 -(((
94 -(((
95 -**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
96 96  )))
97 -)))
98 98  
99 99  (((
100 -(((
101 - for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
102 102  )))
103 -)))
104 -)))
105 105  
106 106  (((
107 -(((
108 -(((
109 -
33 +HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
110 110  )))
111 -)))
112 -)))
113 113  
114 -(((
115 -(((
116 -(((
117 - HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
118 -)))
119 -)))
36 +== **1.2 Specifications** ==
120 120  
121 -(((
122 -(((
123 - customize the frequency bands to use in their own LoRaWAN network.
124 -)))
125 -)))
126 -)))
127 -
128 -
129 -===== 1.2 Specifications =====
130 -
131 -(((
132 -(((
133 133  **~ Hardware System:**
134 -)))
135 -)))
136 -
137 -(((
138 -(((
139 139   Linux Part:
140 -)))
141 -)))
142 142  
143 -* (((
144 -(((
145 -Raspberry Pi 4
146 -)))
147 -)))
41 +* Raspberry Pi 4
148 148  
149 -(((
150 -(((
151 151  **~ Interface:**
152 -)))
153 -)))
154 154  
155 -* (((
156 -(((
157 -10M/100M RJ45 Ports x 1
158 -)))
159 -)))
160 -* (((
161 -(((
162 -LoRaWAN Wireless
163 -)))
164 -)))
165 -* (((
166 -(((
167 -Power Input: 12V 2A, DC
168 -)))
169 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
170 170  
171 -(((
172 -(((
173 173  **~ Operating Condition:**
174 -)))
175 -)))
176 176  
177 -* (((
178 -(((
179 -Work Temperature: -20 ~~ 65°C
180 -)))
181 -)))
182 -* (((
183 -(((
184 -Storage Temperature: -20 ~~ 65°C
185 -)))
186 -)))
187 -* (((
188 -(((
189 -Power Input: 12V 2A, DC
190 -)))
191 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
192 192  
193 -===== 1.3 Features =====
55 +== **1.3 Features** ==
194 194  
195 195  * Open-Source Linux system
196 196  * RPi4 with 2G /4G or 8G RAM
... ... @@ -207,275 +207,155 @@
207 207  * Include prepaid $40 onboarding cost and $10 location cost.
208 208  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
209 209  
210 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
211 211  
212 -
213 213  [[image:1651803959860-394.png||height="500" width="375"]]
214 214  
215 215  
216 216  
217 -(((
218 -(((
219 -**~ Label information:**
220 -)))
221 -)))
78 +=== 1.4.1 Label information: ===
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
228 228  
229 -(((
230 -(((
231 -**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
232 -)))
233 -)))
234 234  
235 -(((
236 -(((
237 -**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
238 -)))
239 -)))
89 += **2. Quick Start & Onboarding** =
240 240  
241 -(((
242 -(((
243 -**~ Miner animal name**: xxx-xxx-xxx
244 -)))
245 -)))
246 -
247 -(((
248 -(((
249 -**~ Miner address**:          112xxxxxx
250 -)))
251 -)))
252 -
253 -(((
254 -(((
255 -**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
256 -)))
257 -)))
258 -
259 -(((
260 -(((
261 -**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
262 -)))
263 -)))
264 -
265 -(((
266 -(((
267 -**~ SN**:  device serial number.
268 -)))
269 -)))
270 -
271 -
272 -==== 2. Quick Start & Onboarding ====
273 -
274 -(((
275 -(((
276 276  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
277 -)))
278 -)))
279 279  
280 -(% class="wikigeneratedid" id="H-2" %)
281 -(((
282 -
283 -)))
284 284  
285 -===== 2.1  Connect HP0D Web UI =====
94 +== **2.1  Connect HP0D Web UI** ==
286 286  
287 -====== 2.1.1 via HP0D’s Access Point. ======
96 +=== **2.1.1 via HP0D’s Access Point** ===
288 288  
289 -(((
290 -(((
291 - At the first boot of HP0D, it will auto generate a Wi-Fi network
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
292 292  
100 +
293 293  [[image:1651804327535-321.png||height="325" width="199"]]
294 -)))
295 -)))
296 296  
297 -(((
298 -(((
299 -
300 -)))
301 -)))
302 302  
303 -(((
304 -(((
305 305  (% class="box infomessage" %)
306 306  (((
307 - called           : **//HPD-dragino-xxxxxx//**
106 + called  : **//HPD-dragino-xxxxxx//**
308 308  )))
309 -)))
310 -)))
311 311  
312 -(((
313 -(((
314 314  (% class="box infomessage" %)
315 315  (((
316 - with password:  **//dragino+dragino//**
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
317 317  )))
318 -)))
319 -)))
320 320  
321 -(((
322 -(((
323 -
324 -)))
325 -)))
326 326  
327 -(((
328 -(((
329 -
330 -)))
331 -)))
116 +[[image:1651804397792-591.png||height="386" width="733"]]
332 332  
333 -(((
334 -(((
335 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
336 -)))
337 -)))
338 338  
339 -[[image:1651804397792-591.png||height="402" width="763"]]
119 +=== **2.1.2 Connect via HP0D hostname** ===
340 340  
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
341 341  
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
342 342  
343 -====== 2.1.2 Connect via HP0D hostname ======
344 344  
345 -(((
346 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
347 -)))
348 -
349 -(((
350 - PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
351 -)))
352 -
353 -(((
354 - Web-UI via HP0D’s hostname.
355 -)))
356 -
357 -
358 - Like: __**//http:~/~/dragino-4ba54a//**__
359 -
360 -
361 -(% style="text-align:center" %)
362 362  [[image:1651804629009-699.png]]
363 363  
128 +=== **2.1.3 Connect via Ethernet Port** ===
364 364  
365 -====== 2.1.3 Connect via Ethernet Port ======
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
366 366  
367 -(((
368 -(((
369 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
370 -)))
371 -)))
372 372  
373 -(((
374 -(((
375 - router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
376 -)))
377 -)))
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
378 378  
379 -(((
380 -
381 -)))
382 382  
383 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
384 -
385 - or SSH access of HP0D.
386 -
387 -(% style="text-align:center" %)
388 388  [[image:1651804782523-623.png]]
389 389  
390 390  
139 +== **2.2 Generate QR Code** ==
391 391  
392 -===== 2.2 Generate QR Code =====
393 393  
394 394  (((
395 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
396 396  )))
397 397  
398 398  (((
399 - Note: After onboarding, this wallet will become owner of this hotspot.
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
149 +
400 400  )))
401 401  
402 -(% style="text-align:center" %)
403 403  [[image:image-20220506140312-1.png||height="435" width="438"]]
404 404  
405 405  
406 -===== 2.3 Onboarding Hotspot =====
155 +== **2.3 Onboarding Hotspot** ==
407 407  
408 -(((
409 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
410 -)))
411 411  
412 412  (((
413 - Note: the APP version need to be greater than 3.11.
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
414 414  )))
415 415  
416 416  (((
163 +**//Note: the APP version needs to be greater than 3.11.//**
164 +
417 417  
418 418  )))
419 419  
420 420  (((
421 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
422 -)))
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
423 423  
424 -(((
425 - the ‘DRAGINO Miner HP0D’
171 +
426 426  )))
427 427  
428 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
429 429  
430 - 3. Scan the QR Code you generated in the previous step.
431 431  
432 -(% style="text-align:center" %)
177 +//**3. **Scan the QR Code you generated in the previous step.//
178 +
433 433  [[image:1651828211026-220.png||height="405" width="191"]]
434 434  
435 - 4. Onboarding your device
436 436  
437 - Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
182 +(((
183 +//**4. **Onboarding your device//
184 +)))
438 438  
439 - mobile to onboarding server might have issue.
186 +(((
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
440 440  
441 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
189 +
190 +)))
442 442  
443 - [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
444 444  
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
445 445  
446 -5. Check onboarding status
447 447  
448 - You can check from mobile:
197 +**5. **//Check onboarding status where you can check from mobile~://
449 449  
450 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
451 451  
452 - You can also see the hotspot status in below link:
453 453  
454 - https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
202 +//You can also see the hotspot status in the below link~://
455 455  
456 - Example:
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
457 457  
458 - Green Synced means hotspot works normal.
206 +//Example~://
459 459  
460 -(% style="text-align:center" %)
208 +
209 +**//Green Synced means hotspot works normally.//**
210 +
461 461  [[image:1651828427715-679.png||height="374" width="635"]]
462 462  
463 463  
464 -===== 2.4 Set the Port Forwarding =====
214 +== **2.4 Set the Port Forwarding** ==
465 465  
466 -(((
467 - Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
468 -)))
469 469  
470 470  (((
471 - it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
472 472  )))
473 473  
474 -(((
475 - you may have.
476 -)))
477 -
478 -(% style="text-align:center" %)
479 479  [[image:1651828514449-658.png]]
480 480  
481 481  (((
... ... @@ -483,338 +483,424 @@
483 483  )))
484 484  
485 485  (((
486 - Note: Please refer to more detailed Settings
228 +Note: Please refer to more detailed Settings
487 487  )))
488 488  
489 489  (((
490 - [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
491 491  )))
492 492  
493 493  (((
494 - [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
238 +
495 495  )))
496 496  
241 += **3. Check the configuration of HP0D** =
497 497  
498 -==== 3. Check the configuration of HP0D ====
243 +== **3.1 LoRa frequency configuration** ==
499 499  
500 -===== 3.1 LoRa frequency configuration =====
501 501  
502 -(% style="text-align:center" %)
503 503  [[image:1651828687205-178.png||height="323" width="657"]]
504 504  
505 505  
249 +== **3.2 Check the LoRaWAN Server Address** ==
506 506  
507 -===== 3.2 Check the LoRaWAN serveraddress =====
508 508  
252 +[[image:image-20220607160428-1.png||height="472" width="654"]]
509 509  
510 -(% style="text-align:center" %)
511 -[[image:1651828703680-156.png||height="349" width="672"]]
512 512  
255 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
513 513  
514 -===== 3.3 Check Miner configuration =====
257 +[[image:image-20220607161130-2.png||height="501" width="1112"]]
515 515  
516 -(% style="text-align:center" %)
517 -[[image:image-20220506181408-1.png||height="451" width="513"]]
259 +[[image:image-20220607161603-3.png||height="557" width="1113"]]
518 518  
519 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
261 +[[image:image-20220607161812-4.png||height="699" width="1115"]]
520 520  
521 -**~ button of Update, and then wait 10mins to check here,**
522 522  
264 +[[image:image-20220607162635-5.png||height="339" width="1110"]]
523 523  
524 -==== 4. Installation of Antenna ====
266 +[[image:image-20220607162859-6.png]]
525 525  
526 -(((
527 - HP0D use Fiber Glass Antenna.
528 -)))
268 +== **3.3 Check Miner configuration** ==
529 529  
530 -(% style="text-align:center" %)
531 -[[image:1651832158606-882.png]]
532 532  
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
272 +
533 533  (((
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 +
276 +
277 +== **//3.4 Check the Miner state//** ==
278 +
279 +
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 +
282 +
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
284 +
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
534 534  
535 535  )))
536 536  
292 += **4. Installation of Antenna** =
293 +
294 +
537 537  (((
538 -
296 +//HP0D uses Fiber Glass Antenna.//
539 539  )))
540 540  
299 +[[image:1651832158606-882.png]]
300 +
541 541  (((
542 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
302 +
543 543  )))
544 544  
545 545  (((
546 - to antenna and install as below:
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
547 547  )))
548 548  
549 549  (((
550 -(% style="text-align:center" %)
551 551  [[image:1651832205608-998.png||height="349" width="198"]]
311 +
312 +
552 552  )))
553 553  
554 -==== 5. SSH Access for Linux console ====
315 += **5. SSH Access for Linux console** =
555 555  
556 -(((
557 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
558 -)))
559 559  
560 560  (((
561 - Port:         22
319 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-63920a(%%))//**
562 562  )))
563 563  
564 564  (((
565 - User Name:      **root**
323 +//Port:  22//
566 566  )))
567 567  
568 568  (((
569 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
327 +//User Name:      (% style="color:green" %)**root**//
570 570  )))
571 571  
572 572  (((
331 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
332 +
573 573  
574 574  )))
575 575  
576 576  (((
577 - After logging in, you will be in the Linux console and can enter commands as shown below.
337 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
338 +
339 +
578 578  )))
579 579  
580 -(% style="text-align:center" %)
581 -[[image:1651832284160-991.png]]
342 +[[image:1651832284160-991.png||height="171" width="729"]]
582 582  
583 583  
584 -==== **6. How to change the Wireless function of HP0D** ====
345 += **6. How to change the Wireless function of HP0D** =
585 585  
586 - // The wireless function is configured as AP by default and the web page does not support configuration, //
347 +//The wireless function is configured as AP by default and the web page does not support configuration,//
587 587  
588 -// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
349 +//if you want to configure it as STA(client)connection mode,//
589 589  
590 -===== **6.1 Access the Linux console.** =====
351 +//you can configure your WiFi info on the** /Network/WiFi **page.//
591 591  
592 - Follow the previous step of Step 5.
593 593  
354 +**//Note: the wireless state is as AP//**
594 594  
595 -===== 6.2 Install the package of network-manager. =====
356 +[[image:image-20220531170243-5.png||height="469" width="967"]]
596 596  
597 - Run commands:
598 598  
599 -(% class="box infomessage" %)
600 -(((
601 - apt update
602 -)))
359 +== **6.1 Access WiFi configuration page** ==
603 603  
604 -(% class="box infomessage" %)
605 -(((
606 - apt install network-manager
607 -)))
608 608  
609 -[[image:image-20220507140730-1.png]]
362 +[[image:image-20220531165803-2.png]]
610 610  
611 611  
365 +== **6.2 Enter your WiFi information and save** ==
612 612  
613 -===== 6.3 Reboot the device. =====
614 614  
615 - Run command:
368 +[[image:image-20220531165958-3.png]]
616 616  
617 -(% class="box infomessage" %)
618 -(((
619 - reboot
620 -)))
621 621  
622 -[[image:image-20220507140814-2.png]]
371 +== **6.3 Change the WiFi mode.** ==
623 623  
624 -===== 6.4 Check the wireless type =====
625 625  
626 - Run command:
374 +[[image:image-20220531170131-4.png]]
627 627  
628 -(% class="box infomessage" %)
629 -(((
630 - iw dev
631 -)))
376 +== **6.4 Wait system to restart** ==
632 632  
633 -[[image:image-20220507140941-3.png]]
634 634  
635 -===== 6.5 Connect the WiFi. =====
379 +[[image:image-20220531170501-7.png]]
636 636  
637 - Run command:
638 638  
639 -(% class="box infomessage" %)
640 -(((
641 - nmtui
642 -)))
382 +//**Note: When the time remaining is finished it will turn to the home page.**//
643 643  
644 -[[image:image-20220507140953-4.png]]
645 645  
385 +== **6.5 Check the STA state** ==
646 646  
647 647  
648 -==== 7. Trouble Shootings ====
388 +[[image:image-20220531170705-8.png||height="484" width="990"]]
649 649  
650 -===== 7.1 How to get a wallet address? =====
651 651  
652 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
391 += **7. Trouble Shootings** =
653 653  
393 +== **7.1 How to get a wallet address?** ==
654 654  
655 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
656 656  
396 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
397 +
398 +
399 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
400 +
401 +
657 657  (((
658 - User can login the HP0D, able to access other Web Pages except miner page
403 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
659 659  )))
660 660  
661 661  (((
662 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
407 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
408 +
409 +
663 663  )))
664 664  
412 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
665 665  
666 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
667 667  
668 -(% style="text-align:center" %)
669 669  [[image:image-20220506182042-2.png||height="250" width="516"]]
670 670  
671 -(% style="text-align:center" %)
672 672  [[image:1651832455372-647.png||height="224" width="520"]]
673 673  
674 674  
675 - HP0D is establish connection to Helium server and not finished. And you might see above.
420 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
676 676  
677 - It might relate to the network where might up to 10mins
422 +**//It might relate to the network which might be up to 10mins.//**
678 678  
679 679  
680 -===== 7.4 Onboarding – Bad Gaterway =====
425 +== **7.4 Onboarding – Bad Gateway** ==
681 681  
682 -(% style="text-align:center" %)
427 +
683 683  [[image:1651832583790-633.png]]
684 684  
685 - This is caused by the process leads too long which just need to refresh the page.
686 686  
431 +//**This is caused by the process leading too long which just needs to refresh the page.**//
687 687  
688 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
689 689  
690 -(% style="text-align:center" %)
691 -[[image:image-20220506182424-3.png]]
434 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
692 692  
693 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
694 694  
695 - device block height is much lower than the current height as the above picture like '1 1', the QR code
437 +[[image:image-20220506182424-3.png]]
696 696  
697 - generation may fail.
698 698  
440 +(((
441 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
699 699  
700 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
443 +
444 +)))
701 701  
702 -(% style="text-align:center" %)
446 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
447 +
703 703  [[image:1651832742262-209.png||height="297" width="365"]]
704 704  
705 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
706 706  
707 - click the button of ‘Clean’ to re-generate the QR Code.
451 +(((
452 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
708 708  
454 +
455 +)))
709 709  
710 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
457 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
711 711  
712 -(% style="text-align:center" %)
459 +
713 713  [[image:1651832811038-780.png||height="462" width="216"]]
714 714  
715 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
716 716  
717 - please contact us to help you solve.
463 +(((
464 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
718 718  
466 +
467 +)))
719 719  
720 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
469 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
721 721  
722 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
723 723  
724 - public key/ wallet address to onboarding server. Server will return the match MAC address
472 +(((
473 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
725 725  
726 - for this hotspot.
475 +
476 +)))
727 727  
478 +(((
479 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
480 +)))
728 728  
729 - If you don’t see MAC address, make sure your mobile has good internet connection.
730 -
731 -(% style="text-align:center" %)
732 732  [[image:1651832880009-473.png]]
733 733  
734 734  
735 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
485 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
736 736  
737 - This is caused by the server connection delay, which does not affect the normal use.
738 738  
488 +**//This is caused by the server connection delay, which does not affect the regular use.//**
739 739  
740 -(% style="text-align:center" %)
741 741  [[image:1651832959907-357.png]]
742 742  
743 -===== 7.10 Mobile APP crash after scan the QR Code? =====
744 744  
745 -* Make sure you have input the correct Wallet address to generate QR Code.
746 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
747 -* Make sure your mobile app’s relevant permission are enabled.
748 -* Known: The Android 11 version may cause this kind of issue.
493 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
749 749  
750 -1.
751 -11. Why the frequency/region is not the same what I purchased?
752 752  
753 -//Each HP0D is inspected and configured prior to shipping.//
496 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
497 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
498 +* //**Make sure your mobile app’s relevant permission is enabled.**//
499 +* //**Known: The Android 11 version may cause this kind of issue.**//
754 754  
755 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
501 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
756 756  
757 757  
758 -1.
759 -11. Can use the frequency to a region where is not support?
504 +(((
505 +//**Each HP0D is inspected and configured prior to shipping.**//
506 +)))
760 760  
761 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
508 +(((
509 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
762 762  
511 +
512 +)))
513 +
514 +== **7.12 Can use the frequency to a region where is no support?** ==
515 +
516 +
517 +(((
518 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
519 +)))
520 +
521 +(((
763 763  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
764 764  
524 +
525 +)))
765 765  
766 -1.
767 -11. Can change the frequency of the HP0D Miner?
527 +== **7.13 Can change the frequency of the HP0D Miner?** ==
768 768  
529 +
769 769  //We do not recommend doing this, it may damage your device//
770 770  
771 771  
533 +== **7.14 Low Reward and not transmit issue** ==
772 772  
773 773  
536 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
774 774  
775 -1. Supports
538 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
776 776  
777 -//If you are experiencing issues and can’t solve, you can send mail to//
540 +[[image:image-20220527114519-1.png||height="579" width="851"]]
778 778  
779 -[[//support@dragino.com//>>mailto:support@dragino.com]]
780 780  
781 -//With your question as detail as possible. We will reply and help you in the shortest.//
543 +== **7.15 Why is my miner version not the latest** ==
782 782  
783 783  
546 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
784 784  
548 +//However, the download and upgrade may fail due to the network.//
785 785  
786 -1. Order Info
550 +//So **We offer a manual check method:**//
787 787  
788 -**HP0D-XXX**
552 + **// Use the "draginoups" command to check//**
789 789  
790 -**XXX**: Frequency Band
554 +[[image:image-20220601101358-1.png]]
791 791  
792 -* 868: For Bands: EU868,IN865
793 -* 915: For Bands: US915,AU915,AS923,KR920
794 794  
795 -1. Manufacturer Info
796 796  
558 += **8. OTA Version Info** =
559 +
560 +== **When does the OTA update happen?** ==
561 +
562 +
563 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
564 +
565 +== **# 2022/05/14** ==
566 +
567 +
568 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
569 +1. //Add postinst after auto-update//
570 +1. //Add Miner version mark.//
571 +1. //Add fast sync if miner GAP is large//
572 +
573 +== **# 2022/05/24** ==
574 +
575 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
576 +
577 +
578 += **9. Supports** =
579 +
580 +(((
581 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
582 +)))
583 +
584 +(((
585 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
586 +
587 +
588 +)))
589 +
590 += **10. Order Info** =
591 +
592 +(% style="color:#0000ff" %)**HP0D-XXX**
593 +
594 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
595 +
596 +* **AS923**: LoRaWAN AS923 band
597 +* **AU915**: LoRaWAN AU915 band
598 +* **EU868**: LoRaWAN EU868 band
599 +* **KR920**: LoRaWAN KR920 band
600 +* **US915**: LoRaWAN US915 band
601 +* **IN865**: LoRaWAN IN865 band
602 +
603 += **11. Manufacturer Info** =
604 +
605 +(((
797 797  **Shenzhen Dragino Technology Development co. LTD**
607 +)))
798 798  
609 +(((
799 799  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
611 +)))
800 800  
801 -LongCheng Street, LongGang District ; Shenzhen 518116,China
613 +(((
614 +Longcheng Street, LongGang District; Shenzhen 518116, China
802 802  
803 803  
804 -1. FCC Warning
617 +
618 +)))
805 805  
620 += **12. FCC Warning** =
621 +
622 +(((
806 806  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
624 +)))
807 807  
626 +(((
808 808  ~-~- Reorient or relocate the receiving antenna.
628 +)))
809 809  
630 +(((
810 810  ~-~- Increase the separation between the equipment and receiver.
632 +)))
811 811  
634 +(((
812 812  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
636 +)))
813 813  
638 +(((
814 814  ~-~- Consult the dealer or an experienced radio/TV technician for help.
640 +)))
815 815  
816 -
642 +(((
817 817  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
644 +)))
818 818  
819 -
646 +(((
820 820  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
648 +)))
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content