Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 65.2
edited by Edwin Chen
on 2022/05/07 10:23
Change comment: There is no comment for this version
To version 109.1
edited by Kilight Cao
on 2022/06/09 10:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -1,196 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
9 -)))
10 10  
11 -
12 -
13 -
14 -
15 -{{toc/}}
16 -
17 -
18 -==== 1. Introduction ====
19 -
20 -===== 1.1 What is HP0D =====
21 -
22 -(((
23 -(((
24 -(((
25 - The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
26 -)))
27 -)))
28 -
29 -(((
30 -(((
31 - Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
32 -)))
33 -)))
34 -
35 -(((
36 -(((
37 - at low data rates.
38 -)))
39 -)))
40 -)))
41 -
42 -(((
43 -(((
44 -(((
45 45  
46 46  )))
47 -)))
48 -)))
49 49  
50 -(((
51 -(((
52 -(((
53 - HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
54 -)))
55 -)))
11 +**Table of Contents：**
56 56  
57 -(((
58 -(((
59 - ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
60 -)))
61 -)))
13 +{{toc/}}
62 62  
63 -(((
64 -(((
65 - packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
66 -)))
67 -)))
68 68  
69 -(((
70 -(((
71 - HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
72 -)))
73 -)))
74 -)))
16 += **1. Introduction** =
75 75  
76 -(((
77 -(((
78 -(((
79 -**~ and connects max 2 x LoRaWAN servers at the same time**.
80 -)))
81 -)))
82 -)))
18 +== **1.1 What is HP0D** ==
83 83  
84 84  (((
85 -(((
86 -(((
87 -
21 +The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
88 88  )))
89 -)))
90 -)))
91 91  
92 92  (((
93 -(((
94 -(((
95 -**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
96 96  )))
97 -)))
98 98  
99 99  (((
100 -(((
101 - for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
102 102  )))
103 -)))
104 -)))
105 105  
106 106  (((
107 -(((
108 -(((
109 -
33 +HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
110 110  )))
111 -)))
112 -)))
113 113  
114 -(((
115 -(((
116 -(((
117 - HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
118 -)))
119 -)))
36 +== **1.2 Specifications** ==
120 120  
121 -(((
122 -(((
123 - customize the frequency bands to use in their own LoRaWAN network.
124 -)))
125 -)))
126 -)))
127 -
128 -
129 -===== 1.2 Specifications =====
130 -
131 -(((
132 -(((
133 133  **~ Hardware System:**
134 -)))
135 -)))
136 -
137 -(((
138 -(((
139 139   Linux Part:
140 -)))
141 -)))
142 142  
143 -* (((
144 -(((
145 -Raspberry Pi 4
146 -)))
147 -)))
41 +* Raspberry Pi 4
148 148  
149 -(((
150 -(((
151 151  **~ Interface:**
152 -)))
153 -)))
154 154  
155 -* (((
156 -(((
157 -10M/100M RJ45 Ports x 1
158 -)))
159 -)))
160 -* (((
161 -(((
162 -LoRaWAN Wireless
163 -)))
164 -)))
165 -* (((
166 -(((
167 -Power Input: 12V 2A, DC
168 -)))
169 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
170 170  
171 -(((
172 -(((
173 173  **~ Operating Condition:**
174 -)))
175 -)))
176 176  
177 -* (((
178 -(((
179 -Work Temperature: -20 ~~ 65°C
180 -)))
181 -)))
182 -* (((
183 -(((
184 -Storage Temperature: -20 ~~ 65°C
185 -)))
186 -)))
187 -* (((
188 -(((
189 -Power Input: 12V 2A, DC
190 -)))
191 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
192 192  
193 -===== 1.3 Features =====
55 +== **1.3 Features** ==
194 194  
195 195  * Open-Source Linux system
196 196  * RPi4 with 2G /4G or 8G RAM
... ... @@ -207,571 +207,635 @@
207 207  * Include prepaid $40 onboarding cost and $10 location cost.
208 208  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
209 209  
210 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
211 211  
212 -
213 213  [[image:1651803959860-394.png||height="500" width="375"]]
214 214  
215 215  
216 216  
217 -(((
218 -(((
219 -**~ Label information:**
220 -)))
221 -)))
78 +=== 1.4.1 Label information: ===
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
228 228  
229 -(((
230 -(((
231 -**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
232 -)))
233 -)))
234 234  
235 -(((
236 -(((
237 -**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
238 -)))
239 -)))
89 += **2. Quick Start & Onboarding** =
240 240  
241 -(((
242 -(((
243 -**~ Miner animal name**: xxx-xxx-xxx
244 -)))
245 -)))
91 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
246 246  
247 -(((
248 -(((
249 -**~ Miner address**:          112xxxxxx
250 -)))
251 -)))
252 252  
253 -(((
254 -(((
255 -**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
256 -)))
257 -)))
94 +== **2.1  Connect HP0D Web UI** ==
258 258  
96 +=== **2.1.1 via HP0D’s Access Point** ===
97 +
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 +
100 +
101 +[[image:1651804327535-321.png||height="325" width="199"]]
102 +
103 +
104 +(% class="box infomessage" %)
259 259  (((
260 -(((
261 -**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
106 + called  : **//HPD-dragino-xxxxxx//**
262 262  )))
263 -)))
264 264  
109 +(% class="box infomessage" %)
265 265  (((
266 -(((
267 -**~ SN**:  device serial number.
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
268 268  )))
269 -)))
270 270  
271 271  
272 -==== 2. Quick Start & Onboarding ====
116 +[[image:1651804397792-591.png||height="386" width="733"]]
273 273  
274 -(((
275 -(((
276 - The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after
277 -)))
278 278  
119 +=== **2.1.2 Connect via HP0D hostname** ===
120 +
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 +
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 +
125 +
126 +[[image:1651804629009-699.png]]
127 +
128 +=== **2.1.3 Connect via Ethernet Port** ===
129 +
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 +
132 +
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 +
135 +
136 +[[image:1651804782523-623.png]]
137 +
138 +
139 +== **2.2 Generate QR Code** ==
140 +
141 +
279 279  (((
280 - connecting to its Wi-Fi network, or via its WAN Ethernet port.
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
281 281  )))
282 -)))
283 283  
284 -(% class="wikigeneratedid" id="H-2" %)
285 285  (((
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
286 286  
287 287  )))
288 288  
289 -===== 2.1  Connect HP0D Web UI =====
152 +[[image:image-20220506140312-1.png||height="435" width="438"]]
290 290  
291 -====== 2.1.1 via HP0D’s Access Point. ======
292 292  
155 +== **2.3 Onboarding Hotspot** ==
156 +
157 +
293 293  (((
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
160 +)))
161 +
294 294  (((
295 - At the first boot of HP0D, it will auto generate a Wi-Fi network
163 +**//Note: the APP version needs to be greater than 3.11.//**
296 296  
297 -[[image:1651804327535-321.png||height="325" width="199"]]
165 +
298 298  )))
299 -)))
300 300  
301 301  (((
302 -(((
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 +
303 303  
304 304  )))
305 -)))
306 306  
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
175 +
176 +
177 +//**3. **Scan the QR Code you generated in the previous step.//
178 +
179 +[[image:1651828211026-220.png||height="405" width="191"]]
180 +
181 +
307 307  (((
308 -(((
309 -(% class="box infomessage" %)
310 -(((
311 - called           : **//HPD-dragino-xxxxxx//**
183 +//**4. **Onboarding your device//
312 312  )))
313 -)))
314 -)))
315 315  
316 316  (((
317 -(((
318 -(% class="box infomessage" %)
319 -(((
320 - with password:  **//dragino+dragino//**
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
188 +
189 +
321 321  )))
322 -)))
323 -)))
324 324  
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
193 +
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
195 +
196 +
197 +**5. **//Check onboarding status where you can check from mobile~://
198 +
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
200 +
201 +
202 +//You can also see the hotspot status in the below link~://
203 +
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
205 +
206 +//Example~://
207 +
208 +
209 +**//Green Synced means hotspot works normally.//**
210 +
211 +[[image:1651828427715-679.png||height="374" width="635"]]
212 +
213 +
214 +== **2.4 Set the Port Forwarding** ==
215 +
216 +
325 325  (((
326 -(((
327 -
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
328 328  )))
329 -)))
330 330  
221 +[[image:1651828514449-658.png]]
222 +
331 331  (((
332 -(((
333 333  
334 334  )))
335 -)))
336 336  
337 337  (((
338 -(((
339 - You can use a PC to connect to this Wi-Fi network. The PC will
228 +Note: Please refer to more detailed Settings
340 340  )))
341 -)))
342 342  
343 343  (((
344 -(((
345 - get an IP address 10.130.1.xxx and the HP0D has the default
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
346 346  )))
347 -)))
348 348  
349 349  (((
350 -(((
351 - IP 10.130.1.1
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 +
238 +
352 352  )))
353 -)))
354 354  
241 += **3. Check the configuration of HP0D** =
355 355  
243 +== **3.1 LoRa frequency configuration** ==
356 356  
357 -(% style="text-align:center" %)
358 -[[image:1651804397792-591.png||height="402" width="763"]]
359 359  
246 +[[image:1651828687205-178.png||height="323" width="657"]]
360 360  
361 361  
362 -====== 2.1.2 Connect via HP0D hostname ======
249 +== **3.2 Check the LoRaWAN Server Address** ==
363 363  
364 -(((
365 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
366 -)))
367 367  
368 -(((
369 - PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
370 -)))
252 +[[image:image-20220607160428-1.png||height="472" width="654"]]
371 371  
372 -(((
373 - Web-UI via HP0D’s hostname.
374 -)))
375 375  
255 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
376 376  
377 - Like: __**//http:~/~/dragino-4ba54a//**__
257 +[[image:image-20220607161130-2.png||height="501" width="1112"]]
378 378  
259 +[[image:image-20220607161603-3.png||height="557" width="1113"]]
379 379  
380 -(% style="text-align:center" %)
381 -[[image:1651804629009-699.png]]
261 +[[image:image-20220607161812-4.png||height="699" width="1115"]]
382 382  
383 383  
384 -====== 2.1.3 Connect via Ethernet Port ======
264 +[[image:image-20220607162635-5.png||height="339" width="1110"]]
385 385  
266 +[[image:image-20220607162859-6.png]]
267 +
268 +== **3.3 Check Miner configuration** ==
269 +
270 +
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
272 +
386 386  (((
387 -(((
388 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 +
276 +
277 +== **//3.4 Check the Miner state//** ==
278 +
279 +
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 +
282 +
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
284 +
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
289 +
389 389  )))
390 -)))
391 391  
292 += **4. Installation of Antenna** =
293 +
294 +
392 392  (((
393 -(((
394 - router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
296 +//HP0D uses Fiber Glass Antenna.//
395 395  )))
396 -)))
397 397  
299 +[[image:1651832158606-882.png]]
300 +
398 398  (((
399 399  
400 400  )))
401 401  
402 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
305 +(((
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 +)))
403 403  
404 - or SSH access of HP0D.
309 +(((
310 +[[image:1651832205608-998.png||height="349" width="198"]]
405 405  
406 -(% style="text-align:center" %)
407 -[[image:1651804782523-623.png]]
312 +
313 +)))
408 408  
315 += **5. SSH Access for Linux console** =
409 409  
410 410  
411 -===== 2.2 Generate QR Code =====
318 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
412 412  
413 -(((
414 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
415 -)))
320 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
416 416  
417 -(((
418 - Note: After onboarding, this wallet will become owner of this hotspot.
419 -)))
322 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
420 420  
421 -(% style="text-align:center" %)
422 -[[image:image-20220506140312-1.png||height="435" width="438"]]
324 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
423 423  
424 424  
425 -===== 2.3 Onboarding Hotspot =====
327 +Below are screenshots:
426 426  
329 +[[image:image-20220608202027-1.png]]
330 +
427 427  (((
428 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
332 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
429 429  )))
430 430  
431 431  (((
432 - Note: the APP version need to be greater than 3.11.
336 +//Port:  22//
433 433  )))
434 434  
435 435  (((
436 -
340 +//User Name:      (% style="color:green" %)**root**//
437 437  )))
438 438  
439 439  (((
440 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
344 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
345 +
346 +
441 441  )))
442 442  
443 443  (((
444 - the ‘DRAGINO Miner HP0D’
350 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
351 +
352 +
445 445  )))
446 446  
447 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
355 +[[image:image-20220608202118-2.png]]
448 448  
449 - 3. Scan the QR Code you generated in the previous step.
450 450  
451 -(% style="text-align:center" %)
452 -[[image:1651828211026-220.png||height="405" width="191"]]
358 += **6. How to change the Wireless function of HP0D** =
453 453  
454 - 4. Onboarding your device
360 +//The wireless function is configured as AP by default and the web page does not support configuration,//
455 455  
456 - Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
362 +//if you want to configure it as STA(client)connection mode,//
457 457  
458 - mobile to onboarding server might have issue.
364 +//you can configure your WiFi info on the** /Network/WiFi **page.//
459 459  
460 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
461 461  
462 - [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
367 +**//Note: the wireless state is as AP//**
463 463  
369 +[[image:image-20220531170243-5.png||height="469" width="967"]]
464 464  
465 -5. Check onboarding status
466 466  
467 - You can check from mobile:
372 +== **6.1 Access WiFi configuration page** ==
468 468  
469 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
470 470  
471 - You can also see the hotspot status in below link:
375 +[[image:image-20220531165803-2.png]]
472 472  
473 - https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
474 474  
475 - Example:
378 +== **6.2 Enter your WiFi information and save** ==
476 476  
477 - Green Synced means hotspot works normal.
478 478  
479 -(% style="text-align:center" %)
480 -[[image:1651828427715-679.png||height="374" width="635"]]
381 +[[image:image-20220531165958-3.png]]
481 481  
482 482  
483 -===== 2.4 Set the Port Forwarding =====
384 +== **6.3 Change the WiFi mode.** ==
484 484  
485 -(((
486 - Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
487 -)))
488 488  
489 -(((
490 - it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
491 -)))
387 +[[image:image-20220531170131-4.png]]
492 492  
493 -(((
494 - you may have.
495 -)))
389 +== **6.4 Wait system to restart** ==
496 496  
497 -(% style="text-align:center" %)
498 -[[image:1651828514449-658.png]]
499 499  
500 -(((
501 -
502 -)))
392 +[[image:image-20220531170501-7.png]]
503 503  
504 -(((
505 - Note: Please refer to more detailed Settings
506 -)))
507 507  
395 +//**Note: When the time remaining is finished it will turn to the home page.**//
396 +
397 +
398 +== **6.5 Check the STA state** ==
399 +
400 +
401 +[[image:image-20220531170705-8.png||height="484" width="990"]]
402 +
403 +
404 += **7. Trouble Shootings** =
405 +
406 +== **7.1 How to get a wallet address?** ==
407 +
408 +
409 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 +
411 +
412 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 +
414 +
508 508  (((
509 - [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
416 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
510 510  )))
511 511  
512 512  (((
513 - [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
420 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
421 +
422 +
514 514  )))
515 515  
425 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
516 516  
517 -==== 3. Check the configuration of HP0D ====
518 518  
519 -===== 3.1 LoRa frequency configuration =====
428 +[[image:image-20220506182042-2.png||height="250" width="516"]]
520 520  
521 -(% style="text-align:center" %)
522 -[[image:1651828687205-178.png||height="323" width="657"]]
430 +[[image:1651832455372-647.png||height="224" width="520"]]
523 523  
524 524  
433 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
525 525  
526 -===== 3.2 Check the LoRaWAN serveraddress =====
435 +**//It might relate to the network which might be up to 10mins.//**
527 527  
528 528  
529 -(% style="text-align:center" %)
530 -[[image:1651828703680-156.png||height="349" width="672"]]
438 +== **7.4 Onboarding – Bad Gateway** ==
531 531  
532 532  
533 -===== 3.3 Check Miner configuration =====
441 +[[image:1651832583790-633.png]]
534 534  
535 -(% style="text-align:center" %)
536 -[[image:image-20220506181408-1.png||height="451" width="513"]]
537 537  
538 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
444 +//**This is caused by the process leading too long which just needs to refresh the page.**//
539 539  
540 -**~ button of Update, and then wait 10mins to check here,**
541 541  
447 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
542 542  
543 -==== 4. Installation of Antenna ====
544 544  
545 -(((
546 - HP0D use Fiber Glass Antenna.
547 -)))
450 +[[image:image-20220506182424-3.png]]
548 548  
549 -(% style="text-align:center" %)
550 -[[image:1651832158606-882.png]]
551 551  
552 552  (((
454 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 +
553 553  
554 554  )))
555 555  
459 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
460 +
461 +[[image:1651832742262-209.png||height="297" width="365"]]
462 +
463 +
556 556  (((
465 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 +
557 557  
558 558  )))
559 559  
560 -(((
561 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
562 -)))
470 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
563 563  
564 -(((
565 - to antenna and install as below:
566 -)))
567 567  
568 -(((
569 -(% style="text-align:center" %)
570 -[[image:1651832205608-998.png||height="349" width="198"]]
571 -)))
473 +[[image:1651832811038-780.png||height="462" width="216"]]
572 572  
573 -==== 5. SSH Access for Linux console ====
574 574  
575 575  (((
576 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
577 -)))
477 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
578 578  
579 -(((
580 - Port:         22
479 +
581 581  )))
582 582  
583 -(((
584 - User Name:      **root**
585 -)))
482 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
586 586  
587 -(((
588 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
589 -)))
590 590  
591 591  (((
486 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
487 +
592 592  
593 593  )))
594 594  
595 595  (((
596 - After logging in, you will be in the Linux console and can enter commands as shown below.
492 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
597 597  )))
598 598  
599 -(% style="text-align:center" %)
600 -[[image:1651832284160-991.png]]
495 +[[image:1651832880009-473.png]]
601 601  
602 602  
498 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
603 603  
604 604  
605 -==== 6. Trouble Shootings ====
501 +**//This is caused by the server connection delay, which does not affect the regular use.//**
606 606  
607 -===== 6.1 How to get a wallet address? =====
503 +[[image:1651832959907-357.png]]
608 608  
609 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
610 610  
506 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
611 611  
612 -===== 6.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
613 613  
509 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 +* //**Make sure your mobile app’s relevant permission is enabled.**//
512 +* //**Known: The Android 11 version may cause this kind of issue.**//
513 +
514 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 +
516 +
614 614  (((
615 - User can login the HP0D, able to access other Web Pages except miner page
518 +//**Each HP0D is inspected and configured prior to shipping.**//
616 616  )))
617 617  
618 618  (((
619 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
522 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
523 +
524 +
620 620  )))
621 621  
527 +== **7.12 Can use the frequency to a region where is no support?** ==
622 622  
623 -===== 6.3 Onboarding ~-~- Some parameters in miner page show timeout =====
624 624  
625 -(% style="text-align:center" %)
626 -[[image:image-20220506182042-2.png||height="250" width="516"]]
530 +(((
531 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 +)))
627 627  
628 -(% style="text-align:center" %)
629 -[[image:1651832455372-647.png||height="224" width="520"]]
534 +(((
535 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
630 630  
537 +
538 +)))
631 631  
632 - HP0D is establish connection to Helium server and not finished. And you might see above.
540 +== **7.13 Can change the frequency of the HP0D Miner?** ==
633 633  
634 - It might relate to the network where might up to 10mins
635 635  
543 +//We do not recommend doing this, it may damage your device//
636 636  
637 -===== 6.4 Onboarding – Bad Gaterway =====
638 638  
639 -(% style="text-align:center" %)
640 -[[image:1651832583790-633.png]]
546 +== **7.14 Low Reward and not transmit issue** ==
641 641  
642 - This is caused by the process leads too long which just need to refresh the page.
643 643  
549 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
644 644  
645 -6.5 Onboarding ~-~- Why did QR Code generate is aways fail?
551 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
646 646  
647 -(% style="text-align:center" %)
648 -[[image:image-20220506182424-3.png]]
553 +[[image:image-20220527114519-1.png||height="579" width="851"]]
649 649  
650 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
651 651  
652 - device block height is much lower than the current height as the above picture like '1 1', the QR code
556 +== **7.15 Why is my miner version not the latest** ==
653 653  
654 - generation may fail.
655 655  
559 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
656 656  
657 -===== 6.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
561 +//However, the download and upgrade may fail due to the network.//
658 658  
659 -(% style="text-align:center" %)
660 -[[image:1651832742262-209.png||height="297" width="365"]]
563 +//So **We offer a manual check method:**//
661 661  
662 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
565 + **// Use the "draginoups" command to check//**
663 663  
664 - click the button of ‘Clean’ to re-generate the QR Code.
567 +[[image:image-20220601101358-1.png]]
665 665  
666 666  
667 -===== 6.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
668 668  
669 -(% style="text-align:center" %)
670 -[[image:1651832811038-780.png||height="462" width="216"]]
571 += **8.How to flash OS to SD card** =
671 671  
672 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
673 673  
674 - please contact us to help you solve.
574 +//**Preparations:**//
675 675  
576 +1. //An SD card with 16GB or more//
676 676  
677 -===== 6.8 Onboarding – MAC address is being refreshed after scan QR Code =====
578 +2. //Download the OS image//
678 678  
679 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
580 +3. //A card reader device//
680 680  
681 - public key/ wallet address to onboarding server. Server will return the match MAC address
582 +4. //A Flash software tool ( Such as balenaEtcher )//
682 682  
683 - for this hotspot.
684 684  
585 +=== **Step 1. Select the OS image that requires flash** ===
685 685  
686 - If you don’t see MAC address, make sure your mobile has good internet connection.
687 687  
688 -(% style="text-align:center" %)
689 -[[image:1651832880009-473.png]]
588 +[[image:image-20220609101843-5.png]]
690 690  
691 691  
692 -===== 6.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
591 +=== **Step 2. Select the target that requires Flash** ===
693 693  
694 - This is caused by the server connection delay, which does not affect the normal use.
695 695  
594 +[[image:image-20220609103538-11.png]]
696 696  
697 -(% style="text-align:center" %)
698 -[[image:1651832959907-357.png]]
596 +[[image:image-20220609101748-3.png]]
699 699  
700 -===== 6.10 Mobile APP crash after scan the QR Code? =====
701 701  
702 -* Make sure you have input the correct Wallet address to generate QR Code.
703 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
704 -* Make sure your mobile app’s relevant permission are enabled.
705 -* Known: The Android 11 version may cause this kind of issue.
599 +=== **Step 3. Flash start** ===
706 706  
707 -1.
708 -11. Why the frequency/region is not the same what I purchased?
709 709  
710 -//Each HP0D is inspected and configured prior to shipping.//
602 +[[image:image-20220609103619-12.png]]
711 711  
712 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
604 +[[image:image-20220609104104-13.png]]
713 713  
714 714  
715 -1.
716 -11. Can use the frequency to a region where is not support?
607 +=== **Flash Complete** ===
717 717  
718 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
719 719  
720 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
610 +[[image:image-20220609104415-1.png]]
721 721  
722 722  
723 -1.
724 -11. Can change the frequency of the HP0D Miner?
613 += **9. OTA Version Info** =
725 725  
726 -//We do not recommend doing this, it may damage your device//
615 +== **When does the OTA update happen?** ==
727 727  
728 728  
618 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
729 729  
620 +== **# 2022/05/14** ==
730 730  
731 731  
732 -1. Supports
623 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
624 +1. //Add postinst after auto-update//
625 +1. //Add Miner version mark.//
626 +1. //Add fast sync if miner GAP is large//
733 733  
734 -//If you are experiencing issues and can’t solve, you can send mail to//
628 +== **# 2022/05/24** ==
735 735  
736 -[[//support@dragino.com//>>mailto:support@dragino.com]]
630 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
737 737  
738 -//With your question as detail as possible. We will reply and help you in the shortest.//
739 739  
633 += **10. Supports** =
740 740  
635 +(((
636 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
637 +)))
741 741  
639 +(((
640 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
742 742  
743 -1. Order Info
642 +
643 +)))
744 744  
745 -**HP0D-XXX**
645 += **11. Order Info** =
746 746  
747 -**XXX**: Frequency Band
647 +(% style="color:#0000ff" %)**HP0D-XXX**
748 748  
749 -* 868: For Bands: EU868,IN865
750 -* 915: For Bands: US915,AU915,AS923,KR920
649 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
751 751  
752 -1. Manufacturer Info
651 +* **AS923**: LoRaWAN AS923 band
652 +* **AU915**: LoRaWAN AU915 band
653 +* **EU868**: LoRaWAN EU868 band
654 +* **KR920**: LoRaWAN KR920 band
655 +* **US915**: LoRaWAN US915 band
656 +* **IN865**: LoRaWAN IN865 band
753 753  
658 += **12. Manufacturer Info** =
659 +
660 +(((
754 754  **Shenzhen Dragino Technology Development co. LTD**
662 +)))
755 755  
664 +(((
756 756  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
666 +)))
757 757  
758 -LongCheng Street, LongGang District ; Shenzhen 518116,China
668 +(((
669 +Longcheng Street, LongGang District; Shenzhen 518116, China
759 759  
760 760  
761 -1. FCC Warning
672 +
673 +)))
762 762  
675 += **13. FCC Warning** =
676 +
677 +(((
763 763  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
679 +)))
764 764  
681 +(((
765 765  ~-~- Reorient or relocate the receiving antenna.
683 +)))
766 766  
685 +(((
767 767  ~-~- Increase the separation between the equipment and receiver.
687 +)))
768 768  
689 +(((
769 769  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
691 +)))
770 770  
693 +(((
771 771  ~-~- Consult the dealer or an experienced radio/TV technician for help.
695 +)))
772 772  
773 -
697 +(((
774 774  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
699 +)))
775 775  
776 -
701 +(((
777 777  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
703 +)))
image-20220507140730-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.2 KB
Content
image-20220527114519-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content