Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 29.1
edited by Xiaoling
on 2022/05/06 17:13
Change comment: Uploaded new attachment "1651828391664-884.png", version {1}
To version 79.1
edited by Xiaoye
on 2022/05/27 09:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,120 +3,58 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1651802206983-860.png||height="645" width="602"]]
2 +[[image:1651802206983-860.png||height="427" width="398"]]
5 5  
6 6  
7 7  (((
8 8  **HP0D Full Hotspot for Helium User Manual**
9 -)))
10 10  
11 -
12 -
13 -
14 -
15 -{{toc/}}
16 -
17 -
18 -==== 1. Introduction ====
19 -
20 -===== 1.1 What is HP0D =====
21 -
22 -(((
23 - The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, optional 3G or 4G.
24 -)))
25 -
26 -(((
27 - The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
28 -)))
29 -
30 -(((
31 31  
32 32  )))
33 33  
34 -(((
35 - HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip.
36 -)))
11 +**Table of Contents：**
37 37  
38 -(((
39 - It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is
40 -)))
13 +{{toc/}}
41 41  
42 -(((
43 - fully compatible with LoRaWAN protocol. HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
44 -)))
45 45  
46 -(((
47 -**~ and connects max 2 x LoRaWAN servers at the same time**.
48 -)))
16 += **1. Introduction** =
49 49  
50 -(((
51 -
52 -)))
18 +== **1.1 What is HP0D** ==
53 53  
54 54  (((
55 -**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to
21 +The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
56 56  )))
57 57  
58 58  (((
59 - input HNT wallet address and use QR  Code to onboarding HP0D when it arrives.
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
60 60  )))
61 61  
62 62  (((
63 -
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
64 64  )))
65 65  
66 66  (((
67 - HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to
33 +HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
68 68  )))
69 69  
70 -(((
71 - use in their own LoRaWAN network.
72 -)))
36 +== **1.2 Specifications** ==
73 73  
74 -
75 -===== 1.2 Specifications =====
76 -
77 -(((
78 78  **~ Hardware System:**
79 -)))
80 -
81 -(((
82 82   Linux Part:
83 -)))
84 84  
85 -* (((
86 -Raspberry Pi 4
87 -)))
41 +* Raspberry Pi 4
88 88  
89 -(((
90 90  **~ Interface:**
91 -)))
92 92  
93 -* (((
94 -10M/100M RJ45 Ports x 1
95 -)))
96 -* (((
97 -LoRaWAN Wireless
98 -)))
99 -* (((
100 -Power Input: 12V 2A, DC
101 -)))
45 +* 10M/100M RJ45 Ports x 1
46 +* LoRaWAN Wireless
47 +* Power Input: 12V 2A, DC
102 102  
103 -(((
104 104  **~ Operating Condition:**
105 -)))
106 106  
107 -* (((
108 -Work Temperature: -20 ~~ 65°C
109 -)))
110 -* (((
111 -Storage Temperature: -20 ~~ 65°C
112 -)))
113 -* (((
114 -Power Input: 12V 2A, DC
115 -)))
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
53 +* Power Input: 12V 2A, DC
116 116  
117 -===== 1.3 Features =====
55 +== **1.3 Features** ==
118 118  
119 119  * Open-Source Linux system
120 120  * RPi4 with 2G /4G or 8G RAM
... ... @@ -131,406 +131,546 @@
131 131  * Include prepaid $40 onboarding cost and $10 location cost.
132 132  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
133 133  
134 -===== 1.4 Label info and login name =====
72 +== **1.4 Label info and login name** ==
135 135  
74 +[[image:1651803959860-394.png||height="500" width="375"]]
136 136  
137 -(% style="text-align:center" %)
138 -[[image:1651803959860-394.png||height="653" width="490"]]
139 139  
140 140  
78 +=== 1.4.1 Label information: ===
141 141  
142 -(((
143 -**~ Label information:**
144 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
145 145  
146 -(((
147 -
148 -)))
149 149  
150 -(((
151 -**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
152 -)))
89 += **2. Quick Start & Onboarding** =
153 153  
154 -(((
155 -**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
156 -)))
91 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
157 157  
158 -(((
159 -**~ Miner animal name**: xxx-xxx-xxx
160 -)))
161 161  
94 +== **2.1  Connect HP0D Web UI** ==
95 +
96 +=== **2.1.1 via HP0D’s Access Point** ===
97 +
98 +At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 +
100 +
101 +[[image:1651804327535-321.png||height="325" width="199"]]
102 +
103 +
104 +(% class="box infomessage" %)
162 162  (((
163 -**~ Miner address**:          112xxxxxx
106 + called  : **//HPD-dragino-xxxxxx//**
164 164  )))
165 165  
109 +(% class="box infomessage" %)
166 166  (((
167 -**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
111 + with password:  **//dragino+dragino//**
112 +You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
168 168  )))
169 169  
115 +
116 +[[image:1651804397792-591.png||height="386" width="733"]]
117 +
118 +
119 +=== **2.1.2 Connect via HP0D hostname** ===
120 +
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 +
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 +
125 +
126 +[[image:1651804629009-699.png]]
127 +
128 +=== **2.1.3 Connect via Ethernet Port** ===
129 +
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 +
132 +
133 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 +
135 +
136 +[[image:1651804782523-623.png]]
137 +
138 +
139 +== **2.2 Generate QR Code** ==
140 +
141 +
170 170  (((
171 -**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
172 172  )))
173 173  
174 174  (((
175 -**~ SN**:  device serial number.
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 +
149 +
176 176  )))
177 177  
152 +[[image:image-20220506140312-1.png||height="435" width="438"]]
178 178  
179 -==== 2. Quick Start & Onboarding ====
180 180  
155 +== **2.3 Onboarding Hotspot** ==
156 +
157 +
181 181  (((
182 - The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
159 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
183 183  )))
184 184  
185 -(% class="wikigeneratedid" id="H-2" %)
186 186  (((
163 +**//Note: the APP version needs to be greater than 3.11.//**
164 +
187 187  
188 188  )))
189 189  
190 -===== 2.1  Connect HP0D Web UI =====
168 +(((
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
191 191  
192 -====== 2.1.1 via HP0D’s Access Point. ======
171 +
172 +)))
193 193  
194 - At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
174 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
195 195  
196 196  
197 - called           : **//HPD-dragino-xxxxxx//**
177 +//**3. **Scan the QR Code you generated in the previous step.//
198 198  
199 - with password:  **//dragino+dragino//**
179 +[[image:1651828211026-220.png||height="405" width="191"]]
200 200  
201 201  
182 +(((
183 +//**4. **Onboarding your device//
184 +)))
202 202  
203 - You can use a PC to connect to this Wi-Fi network. The PC will
186 +(((
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
204 204  
205 - get an IP address 10.130.1.xxx and the HP0D has the default
189 +
190 +)))
206 206  
207 - IP 10.130.1.1
192 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
208 208  
194 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
209 209  
210 210  
211 -(% style="text-align:center" %)
212 -[[image:1651804397792-591.png]]
197 +**5. **//Check onboarding status where you can check from mobile~://
213 213  
199 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
214 214  
215 215  
216 -====== 2.1.2 Connect via HP0D hostname ======
202 +//You can also see the hotspot status in the below link~://
217 217  
218 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
204 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
219 219  
220 - PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
206 +//Example~://
221 221  
222 - Web-UI via HP0D’s hostname.
223 223  
209 +**//Green Synced means hotspot works normally.//**
224 224  
225 - Like: __**//http:~/~/dragino-4ba54a//**__
211 +[[image:1651828427715-679.png||height="374" width="635"]]
226 226  
227 227  
228 -(% style="text-align:center" %)
229 -[[image:1651804629009-699.png]]
214 +== **2.4 Set the Port Forwarding** ==
230 230  
231 231  
232 -====== 2.1.3 Connect via Ethernet Port ======
217 +(((
218 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
219 +)))
233 233  
234 - Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP  address the router has assigned to the HP0D.
221 +[[image:1651828514449-658.png]]
235 235  
223 +(((
224 +
225 +)))
236 236  
237 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
227 +(((
228 +Note: Please refer to more detailed Settings
229 +)))
238 238  
239 -(% style="text-align:center" %)
240 -[[image:1651804782523-623.png]]
231 +(((
232 +[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
233 +)))
241 241  
235 +(((
236 +[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
242 242  
238 +
239 +)))
243 243  
244 -===== 2.2 Generate QR Code =====
241 += **3. Check the configuration of HP0D** =
245 245  
246 - Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
243 +== **3.1 LoRa frequency configuration** ==
247 247  
248 - Note: After onboarding, this wallet will become owner of this hotspot.
249 249  
250 -(% style="text-align:center" %)
251 -[[image:image-20220506140312-1.png]]
246 +[[image:1651828687205-178.png||height="323" width="657"]]
252 252  
253 253  
249 +== **3.2 Check the LoRaWAN Server Address** ==
254 254  
255 -===== 2.3 Onboarding Hotspot =====
256 256  
257 - ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
252 +[[image:1651828703680-156.png||height="349" width="672"]]
258 258  
259 - Note: the APP version need to be greater than 3.11.
260 260  
261 - 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
255 +== **3.3 Check Miner configuration** ==
262 262  
263 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
264 264  
265 - 3. Scan the QR Code you generated in the previous step.
258 +[[image:image-20220506181408-1.png||height="451" width="513"]]
266 266  
260 +(((
261 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
267 267  
268 - 4. Onboarding your device
263 +
264 +)))
269 269  
270 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
266 += **4. Installation of Antenna** =
271 271  
272 - [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
273 273  
269 +(((
270 +//HP0D uses Fiber Glass Antenna.//
271 +)))
274 274  
273 +[[image:1651832158606-882.png]]
275 275  
275 +(((
276 +
277 +)))
276 276  
279 +(((
280 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
281 +)))
277 277  
283 +(((
284 +[[image:1651832205608-998.png||height="349" width="198"]]
278 278  
279 -1. Check onboarding status
286 +
287 +)))
280 280  
281 -You can check from mobile:
289 += **5. SSH Access for Linux console** =
282 282  
283 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
284 284  
285 -You can also see the hotspot status in below link:
292 +(((
293 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-63920a(%%))//**
294 +)))
286 286  
287 -https:~/~/explorer.helium.com/hotspots/**//<YOUR_HOTSPORT_KEY>//**
296 +(((
297 +//Port:  22//
298 +)))
288 288  
289 -Example:
300 +(((
301 +//User Name:      (% style="color:green" %)**root**//
302 +)))
290 290  
291 -Green Synced means hotspot works normal.
304 +(((
305 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
292 292  
293 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
307 +
308 +)))
294 294  
310 +(((
311 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
295 295  
313 +
314 +)))
296 296  
316 +[[image:1651832284160-991.png||height="171" width="729"]]
297 297  
298 298  
299 -1.
300 -11. Set the Port Forwarding
319 += **6. How to change the Wireless function of HP0D** =
301 301  
302 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
321 +//The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
303 303  
304 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
305 305  
324 +== **6.1 Access the Linux console.** ==
306 306  
307 -Note: Please refer to more detailed Settings
326 +//Follow the previous step of Step 5.//
308 308  
309 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
310 310  
311 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
329 +== **6.2 Install the package of network-manager** ==
312 312  
313 313  
332 +//Run commands~://
314 314  
334 +(% class="box infomessage" %)
335 +(((
336 + apt update
337 + apt install network-manager
338 +)))
315 315  
340 +[[image:image-20220507140730-1.png||height="402" width="728"]]
316 316  
317 -1. Check the configuration of HP0D
318 -11. LoRa frequency configuration
319 319  
320 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
343 +== **6.3 Reboot the device** ==
321 321  
322 -1.
323 -11. Check the LoRaWAN serveraddress.
324 324  
325 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
346 +//Run command~://
326 326  
348 +(% class="box infomessage" %)
349 +(((
350 + reboot
351 +)))
327 327  
353 +[[image:image-20220507140814-2.png]]
328 328  
329 329  
356 +== **6.4 Check the wireless type** ==
330 330  
331 331  
359 +//Run command~://
332 332  
361 +(% class="box infomessage" %)
362 +(((
363 + iw dev
364 +)))
333 333  
366 +[[image:image-20220507140941-3.png]]
334 334  
335 -1.
336 -11. Check Miner configuration
337 337  
338 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
369 +== **6.5 Connect the WiFi** ==
339 339  
340 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
341 341  
372 +//Run command~://
342 342  
374 +(% class="box infomessage" %)
375 +(((
376 + nmtui
377 +)))
343 343  
379 +[[image:image-20220507140953-4.png]]
344 344  
345 345  
346 -1. Installation of Antenna
382 += **7. Trouble Shootings** =
347 347  
348 -HP0D use Fiber Glass Antenna.
384 +== **7.1 How to get a wallet address?** ==
349 349  
350 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
351 351  
352 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
387 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
353 353  
354 354  
355 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
390 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
356 356  
357 357  
393 +(((
394 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
395 +)))
358 358  
397 +(((
398 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
359 359  
400 +
401 +)))
360 360  
361 -1. SSH Access for Linux console
403 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
362 362  
363 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
364 364  
365 -Port:         22
406 +[[image:image-20220506182042-2.png||height="250" width="516"]]
366 366  
367 -User Name:      **root**
408 +[[image:1651832455372-647.png||height="224" width="520"]]
368 368  
369 -Password:         **Randomly generated （found on device’s label ）**
370 370  
411 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
371 371  
372 -After logging in, you will be in the Linux console and can enter commands as shown below.
413 +**//It might relate to the network which might be up to 10mins.//**
373 373  
374 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
375 375  
416 +== **7.4 Onboarding – Bad Gateway** ==
376 376  
377 377  
419 +[[image:1651832583790-633.png]]
378 378  
379 -1. Trouble Shootings
380 -11. How to get a wallet address?
381 381  
382 -//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
422 +//**This is caused by the process leading too long which just needs to refresh the page.**//
383 383  
384 384  
385 -1.
386 -11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
425 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
387 387  
388 -//User can login the HP0D, able to access other Web Pages except miner page//
389 389  
428 +[[image:image-20220506182424-3.png]]
390 390  
391 -//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
392 392  
431 +(((
432 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
393 393  
394 -1.
395 -11. Onboarding ~-~- Some parameters in miner page show timeout
434 +
435 +)))
396 396  
397 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
437 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
398 398  
399 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
439 +[[image:1651832742262-209.png||height="297" width="365"]]
400 400  
401 -//HP0D is establish connection to Helium server and not finished. And you might see above.//
402 402  
403 -//It might relate to the network where might up to 10mins//
442 +(((
443 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
404 404  
445 +
446 +)))
405 405  
406 -1.
407 -11. Onboarding – Bad Gaterway
448 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
408 408  
409 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
410 410  
411 -//This is caused by the process leads too long which just need to refresh the page.//
451 +[[image:1651832811038-780.png||height="462" width="216"]]
412 412  
413 413  
414 -1.
415 -11. Onboarding ~-~- Why did QR Code generate is aways fail?
454 +(((
455 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
416 416  
417 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
457 +
458 +)))
418 418  
419 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
460 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
420 420  
421 421  
422 -1.
423 -11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
463 +(((
464 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
424 424  
425 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
466 +
467 +)))
426 426  
427 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
469 +(((
470 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
471 +)))
428 428  
473 +[[image:1651832880009-473.png]]
429 429  
430 -1.
431 -11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
432 432  
433 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
476 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
434 434  
435 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
436 436  
479 +**//This is caused by the server connection delay, which does not affect the regular use.//**
437 437  
438 -1.
439 -11. Onboarding – MAC address is being refreshed after scan QR Code
481 +[[image:1651832959907-357.png]]
440 440  
441 -//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
442 442  
484 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
443 443  
444 -//If you don’t see MAC address, make sure your mobile has good internet connection.//
445 445  
446 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
487 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
488 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
489 +* //**Make sure your mobile app’s relevant permission is enabled.**//
490 +* //**Known: The Android 11 version may cause this kind of issue.**//
447 447  
492 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
448 448  
449 449  
495 +(((
496 +//**Each HP0D is inspected and configured prior to shipping.**//
497 +)))
450 450  
451 -1.
452 -11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
499 +(((
500 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
453 453  
454 -//This is caused by the server connection delay, which does not affect the normal use.//
502 +
503 +)))
455 455  
456 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
505 +== **7.12 Can use the frequency to a region where is no support?** ==
457 457  
458 458  
459 -*
460 -*1. Mobile APP crash after scan the QR Code?
461 -* //Make sure you have input the correct Wallet address to generate QR Code.//
462 -* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
463 -* //Make sure your mobile app’s relevant permission are enabled.//
464 -* //Known: The Android 11 version may cause this kind of issue.//
508 +(((
509 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
510 +)))
465 465  
466 -1.
467 -11. Why the frequency/region is not the same what I purchased?
512 +(((
513 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
468 468  
469 -//Each HP0D is inspected and configured prior to shipping.//
515 +
516 +)))
470 470  
471 -//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
518 +== **7.13 Can change the frequency of the HP0D Miner?** ==
472 472  
473 473  
474 -1.
475 -11. Can use the frequency to a region where is not support?
521 +//We do not recommend doing this, it may damage your device//
476 476  
477 -//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
478 478  
479 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
524 += **8. OTA Version Info** =
480 480  
526 +== **When does the OTA update happen?** ==
481 481  
482 -1.
483 -11. Can change the frequency of the HP0D Miner?
484 484  
485 -//We do not recommend doing this, it may damage your device//
529 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
486 486  
531 +== **# 2022/05/14** ==
487 487  
488 488  
534 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
535 +1. //Add postinst after auto-update//
536 +1. //Add Miner version mark.//
537 +1. //Add fast sync if miner GAP is large//
489 489  
539 +== **# 2022/05/24** ==
490 490  
491 -1. Supports
541 + 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
492 492  
493 -//If you are experiencing issues and can’t solve, you can send mail to//
494 494  
495 -[[//support@dragino.com//>>mailto:support@dragino.com]]
544 += **9. Supports** =
496 496  
497 -//With your question as detail as possible. We will reply and help you in the shortest.//
546 +(((
547 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
548 +)))
498 498  
550 +(((
551 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
499 499  
553 +
554 +)))
500 500  
556 += **10. Order Info** =
501 501  
502 -1. Order Info
558 +(% style="color:#0000ff" %)**HP0D-XXX**
503 503  
504 -**HP0D-XXX**
560 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
505 505  
506 -**XXX**: Frequency Band
562 +* **AS923**: LoRaWAN AS923 band
563 +* **AU915**: LoRaWAN AU915 band
564 +* **EU868**: LoRaWAN EU868 band
565 +* **KR920**: LoRaWAN KR920 band
566 +* **US915**: LoRaWAN US915 band
567 +* **IN865**: LoRaWAN IN865 band
507 507  
508 -* 868: For Bands: EU868,IN865
509 -* 915: For Bands: US915,AU915,AS923,KR920
569 += **11. Manufacturer Info** =
510 510  
511 -1. Manufacturer Info
512 -
571 +(((
513 513  **Shenzhen Dragino Technology Development co. LTD**
573 +)))
514 514  
575 +(((
515 515  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
577 +)))
516 516  
517 -LongCheng Street, LongGang District ; Shenzhen 518116,China
579 +(((
580 +Longcheng Street, LongGang District; Shenzhen 518116, China
518 518  
519 519  
520 -1. FCC Warning
583 +
584 +)))
521 521  
586 += **12. FCC Warning** =
587 +
588 +(((
522 522  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
590 +)))
523 523  
592 +(((
524 524  ~-~- Reorient or relocate the receiving antenna.
594 +)))
525 525  
596 +(((
526 526  ~-~- Increase the separation between the equipment and receiver.
598 +)))
527 527  
600 +(((
528 528  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
602 +)))
529 529  
604 +(((
530 530  ~-~- Consult the dealer or an experienced radio/TV technician for help.
606 +)))
531 531  
532 -
608 +(((
533 533  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
610 +)))
534 534  
535 -
612 +(((
536 536  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
614 +)))
1651828401011-970.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.0 KB
Content
1651828427715-679.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +538.6 KB
Content
1651828514449-658.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.1 KB
Content
1651828687205-178.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.6 KB
Content
1651828703680-156.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +113.7 KB
Content
1651829241318-427.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.3 KB
Content
1651829292719-315.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.7 KB
Content
1651829385186-114.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.3 KB
Content
1651829783380-920.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +80.5 KB
Content
1651829907019-256.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
1651830026619-866.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.8 KB
Content
image-20220506172609-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.1 KB
Content
image-20220506173610-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20220506173921-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.2 KB
Content