Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 199.4
edited by Xiaoling
on 2024/03/12 17:02
Change comment: There is no comment for this version
To version 183.1
edited by Kilight Cao
on 2023/02/08 14:03
Change comment: Uploaded new attachment "image-20230208140312-9.jpeg", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D -- Full Hotspot for Helium User Manual
1 +HP0D Full Hotspot for Helium User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -8,57 +8,60 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents:**
11 +**Table of Contents：**
12 12  
13 13  {{toc/}}
14 14  
15 15  
16 -= 1. Introduction =
16 += **1. Introduction** =
17 17  
18 -== 1.1 What is HP0D ==
19 19  
19 +== **1.1 What is HP0D** ==
20 20  
21 +
21 21  (((
22 22  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:blue" %)** miner feature from Helium** (%%) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:blue" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 27  )))
28 28  
29 29  (((
30 -(% style="color:blue" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (%%)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 31  )))
32 32  
33 33  (((
34 34  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35 -)))
36 36  
37 37  
38 -== 1.2 Specifications ==
38 +
39 +)))
39 39  
41 +== **1.2 Specifications** ==
40 40  
41 -(% style="color:blue" %)** Hardware System:**
42 42  
43 - **Linux Part:**
44 +**~ Hardware System:**
45 + Linux Part:
44 44  
45 45  * Raspberry Pi 4
46 46  
47 -(% style="color:blue" %)** Interface:**
49 +**~ Interface:**
48 48  
49 49  * 10M/100M RJ45 Ports x 1
50 50  * LoRaWAN Wireless
51 51  * Power Input: 12V 2A, DC
52 52  
53 -(% style="color:blue" %)** Operating Condition:**
55 +**~ Operating Condition:**
54 54  
55 55  * Work Temperature: -20 ~~ 65°C
56 56  * Storage Temperature: -20 ~~ 65°C
57 57  * Power Input: 12V 2A, DC
58 58  
59 -== 1.3 Features ==
60 60  
62 +== **1.3 Features** ==
61 61  
64 +
62 62  * Open-Source Linux system
63 63  * RPi4 with 2G /4G or 8G RAM
64 64  * Managed by Web GUI, SSH via Internet
... ... @@ -74,45 +74,44 @@
74 74  * Include prepaid $40 onboarding cost and $10 location cost.
75 75  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
76 76  
77 -== 1.4 Label info and login name ==
78 78  
81 +== **1.4 Label info and login name** ==
79 79  
83 +
80 80  [[image:1651803959860-394.png||height="500" width="375"]]
81 81  
82 82  
83 -=== 1.4.1 Label information: ===
84 84  
88 +=== **1.4.1 Label information:** ===
85 85  
86 -(((
87 -**Device hostname:  (% style="background-color:yellow" %)dragino-xxxxxx (%%)**
88 88  
89 -**Band:  (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)**
90 -
91 -**Miner animal name:  (% style="background-color:yellow" %)xxx-xxx-xxx (%%)**
92 -
93 -**Miner address:  (% style="background-color:yellow" %)12xxxxxx (%%)**
94 -
95 -**Eth MAC address:  (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)**
96 -
97 -**Login:  (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)**
98 -
99 -**SN:  (% style="background-color:yellow" %) device serial number.(%%)**
91 +(((
92 +**Device hostname:**  (% style="background-color:yellow" %)dragino-xxxxxx(%%)
93 +**Band**:  (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)
94 +**Miner animal name**:  (% style="background-color:yellow" %)xxx-xxx-xxx (%%)
95 +**Miner address**:  (% style="background-color:yellow" %)12xxxxxx (%%)
96 +**Eth MAC address**:  (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)
97 +**Login**:  (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)
98 +**SN**:  (% style="background-color:yellow" %) device serial number.
100 100  )))
101 101  
102 102  
103 -= 2. Quick Start & Onboarding =
104 104  
103 += **2. Quick Start & Onboarding** =
105 105  
105 +
106 106  (((
107 107  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
108 108  )))
109 109  
110 110  
111 -== 2.1  Connect HP0D Web UI ==
112 112  
113 -=== 2.1.1 via HP0D's Access Point ===
112 +== **2.1  Connect HP0D Web UI** ==
114 114  
115 115  
115 +=== **2.1.1 via HP0D's Access Point** ===
116 +
117 +
116 116  At the first boot of HP0D, it will auto-generate a Wi-Fi network
117 117  
118 118  
... ... @@ -134,9 +134,10 @@
134 134  [[image:1651804397792-591.png||height="386" width="733"]]
135 135  
136 136  
137 -=== 2.1.2 Connect via HP0D hostname ===
138 138  
140 +=== **2.1.2 Connect via HP0D hostname** ===
139 139  
142 +
140 140  (((
141 141  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
142 142  )))
... ... @@ -147,16 +147,17 @@
147 147  [[image:1651804629009-699.png]]
148 148  
149 149  
150 -=== 2.1.3 Connect via Ethernet Port ===
151 151  
154 +=== **2.1.3 Connect via Ethernet Port** ===
152 152  
156 +
153 153  (((
154 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
158 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
155 155  )))
156 156  
157 157  
158 158  (((
159 -If you get the IP address from the router, like: (% class="mark" %)**10.130.2.42**(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.
163 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
160 160  )))
161 161  
162 162  
... ... @@ -163,15 +163,16 @@
163 163  [[image:1651804782523-623.png]]
164 164  
165 165  
166 -== 2.2 Generate QR Code ==
167 167  
171 +== **2.2 Generate QR Code** ==
168 168  
173 +
169 169  (((
170 -Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.
175 +//Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
171 171  )))
172 172  
173 173  (((
174 -(% style="color:red" %)**Note: After onboarding, this wallet will become the owner of this hotspot.**
179 +(% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
175 175  
176 176  
177 177  )))
... ... @@ -179,57 +179,84 @@
179 179  [[image:image-20220506140312-1.png||height="435" width="438"]]
180 180  
181 181  
182 -== 2.3 Onboarding Hotspot via Dragino App ==
183 183  
188 +== **2.3 Onboarding Hotspot** ==
184 184  
190 +
185 185  (((
186 -**1.** Download the Dragino App from this link.
192 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
187 187  
188 -Users need to download two apps：**[[Dragino APP>>http://47.75.121.71:8899/Xiao/app-release.apk]]**and** [[Helium Wallet>>https://play.google.com/store/apps/details?id=com.helium.wallet.app]]  **(Android Version Only)
194 +
189 189  )))
190 190  
191 191  (((
192 -
198 +(% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
193 193  
194 -**2. **sign in helium account
195 -
196 -[[image:image-20230208142551-2.png||height="544" width="245"]] [[image:image-20230208142627-3.png||height="543" width="244"]]
197 -
198 198  
199 199  )))
200 200  
201 201  (((
202 -**3. **To add a hotspot, select (% style="color:blue" %)**“+ add Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**
204 +//**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
205 +
206 +
203 203  )))
204 204  
205 -[[image:image-20230208142457-1.png||height="554" width="249"]] [[image:image-20230208142715-4.png||height="552" width="248"]]
209 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
206 206  
207 207  
208 -**4.** Scan the QR Code you generated in the previous step.
209 209  
210 -[[image:image-20230208142758-6.png||height="566" width="255"]]
213 +//**3. **Scan the QR Code you generated in the previous step.//
211 211  
212 212  
216 +[[image:1651828211026-220.png||height="405" width="191"]]
217 +
218 +
219 +
213 213  (((
214 -**5. **Onboarding your device
221 +//**4. **Onboarding your device//
222 +
223 +
215 215  )))
216 216  
217 217  (((
218 218  Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
219 219  
220 -[[image:image-20230208141050-11.png||height="572" width="258"]] [[image:image-20230208141511-12.jpeg||height="571" width="257"]]
229 +
230 +)))
221 221  
232 +[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
222 222  
223 -**6. **//Check onboarding status where you can check from mobile~://
234 + [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
224 224  
225 -
226 -)))
227 227  
228 -== 2.4 Set the Port Forwarding ==
229 229  
238 +**5. **//Check onboarding status where you can check from mobile~://
230 230  
240 +
241 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
242 +
243 +
244 +//You can also see the hotspot status in the below link~://
245 +
246 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
247 +
248 +//Example~://
249 +
250 +
251 +**//Green Synced means hotspot works normally.//**
252 +
253 +[[image:1651828427715-679.png||height="374" width="635"]]
254 +
255 +
256 +
257 +== **2.3 Onboarding Hotspot via Dragino App** ==
258 +
259 +
260 +== **2.4 Set the Port Forwarding** ==
261 +
262 +
231 231  (((
232 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
264 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
233 233  )))
234 234  
235 235  [[image:1651828514449-658.png]]
... ... @@ -255,26 +255,30 @@
255 255  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
256 256  )))
257 257  
290 +
258 258  
259 259  )))
260 260  
261 -= 3. Check the configuration of HP0D =
294 += **3. Check the configuration of HP0D** =
262 262  
263 -== 3.1 LoRa frequency configuration ==
264 264  
297 +== **3.1 LoRa frequency configuration** ==
265 265  
299 +
266 266  [[image:1651828687205-178.png||height="323" width="657"]]
267 267  
268 268  
269 -== 3.2 Check the LoRaWAN Server Address ==
270 270  
304 +== **3.2 Check the LoRaWAN Server Address** ==
271 271  
306 +
272 272  [[image:image-20220607160428-1.png||height="472" width="654"]]
273 273  
274 274  
275 -== 3.2.1 Configure the Secondary LoRaWAN Server ==
276 276  
311 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
277 277  
313 +
278 278  [[image:image-20220607161130-2.png||height="501" width="1112"]]
279 279  
280 280  
... ... @@ -284,34 +284,37 @@
284 284  [[image:image-20220607161812-4.png||height="699" width="1115"]]
285 285  
286 286  
287 -== 3.3 Check Miner configuration ==
288 288  
324 +== **3.3 Check Miner configuration** ==
289 289  
290 -[[image:image-20230509103835-1.png||height="481" width="659"]]
291 291  
327 +[[image:image-20220506181408-1.png||height="451" width="513"]]
292 292  
329 +
293 293  (((
294 294  (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
295 295  
296 296  
297 -== 3.4 Check the Miner state ==
298 298  
335 +== **//3.4 Check the Miner state//** ==
299 299  
300 -[[image:image-20230509103931-2.png||height="636" width="1224"]]
301 301  
338 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
302 302  
340 +
303 303  (((
304 304  (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
305 305  )))
306 306  
345 +
307 307  
308 308  )))
309 309  
310 -= 4. Installation of Antenna =
349 += **4. Installation of Antenna** =
311 311  
312 312  
313 313  (((
314 -HP0D uses Fiber Glass Antenna.
353 +//HP0D uses Fiber Glass Antenna.//
315 315  )))
316 316  
317 317  [[image:1651832158606-882.png]]
... ... @@ -321,32 +321,33 @@
321 321  )))
322 322  
323 323  (((
324 -The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below:
363 +//The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
325 325  )))
326 326  
327 327  (((
328 328  [[image:1651832205608-998.png||height="349" width="198"]]
329 329  
369 +
330 330  
331 331  )))
332 332  
333 -= 5. SSH Access for Linux console =
373 += **5. SSH Access for Linux console** =
334 334  
335 335  
336 336  (((
337 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.
377 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
338 338  )))
339 339  
340 340  (((
341 -In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
381 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
342 342  )))
343 343  
344 344  (((
345 -You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.
385 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
346 346  )))
347 347  
348 348  (((
349 -Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.
389 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
350 350  )))
351 351  
352 352  
... ... @@ -356,25 +356,25 @@
356 356  
357 357  
358 358  (((
359 -**IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))**
399 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
360 360  )))
361 361  
362 362  (((
363 -**Port: ** (% style="color:green" %)**22**
403 +//Port:  (% style="color:green" %)**22**//
364 364  )))
365 365  
366 366  (((
367 -**User Name:  ** (% style="color:green" %)**root**
407 +//User Name:      (% style="color:green" %)**root**//
368 368  )))
369 369  
370 370  (((
371 -**Password:**         (% style="color:green" %)**Randomly generated （found on device's label）**
411 +//Password:         (% style="color:green" %)**Randomly generated （found on device's label）**//
372 372  
373 373  
374 374  )))
375 375  
376 376  (((
377 -After logging in, you will be in the Linux console and can enter commands as shown below.
417 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
378 378  
379 379  
380 380  )))
... ... @@ -382,16 +382,17 @@
382 382  [[image:image-20220608202118-2.png]]
383 383  
384 384  
385 -= 6. How to change the Wireless function of HP0D =
386 386  
426 += **6. How to change the Wireless function of HP0D** =
387 387  
388 -The wireless function is configured as AP by default and the web page does not support configuration,
389 389  
390 -if you want to configure it as STA(client)connection mode,
429 +//The wireless function is configured as AP by default and the web page does not support configuration,//
391 391  
392 -you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.
431 +//if you want to configure it as STA(client)connection mode,//
393 393  
433 +//you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
394 394  
435 +
395 395  (% style="color:red" %)**//Note: the wireless state is as AP//**
396 396  
397 397  
... ... @@ -398,27 +398,31 @@
398 398  [[image:image-20220531170243-5.png||height="469" width="967"]]
399 399  
400 400  
401 -== 6.1 Access WiFi configuration page ==
402 402  
443 +== **6.1 Access WiFi configuration page** ==
403 403  
445 +
404 404  [[image:image-20220531165803-2.png]]
405 405  
406 406  
407 -== 6.2 Enter your WiFi information and save ==
408 408  
450 +== **6.2 Enter your WiFi information and save** ==
409 409  
452 +
410 410  [[image:image-20220531165958-3.png]]
411 411  
412 412  
413 -== 6.3 Change the WiFi mode ==
414 414  
457 +== **6.3 Change the WiFi mode.** ==
415 415  
459 +
416 416  [[image:image-20220531170131-4.png]]
417 417  
418 418  
419 -== 6.4 Wait system to restart ==
420 420  
464 +== **6.4 Wait system to restart** ==
421 421  
466 +
422 422  [[image:image-20220531170501-7.png]]
423 423  
424 424  
... ... @@ -425,34 +425,39 @@
425 425  (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
426 426  
427 427  
428 -== 6.5 Check the STA state ==
429 429  
474 +== **6.5 Check the STA state** ==
430 430  
476 +
431 431  [[image:image-20220531170705-8.png||height="484" width="990"]]
432 432  
433 433  
434 -= 7. Trouble Shootings =
435 435  
436 -== 7.1 How to get a wallet address? ==
481 += **7. Trouble Shootings** =
437 437  
438 438  
439 -Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.
484 +== **7.1 How to get a wallet address?** ==
440 440  
441 441  
442 -== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner ==
487 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
443 443  
444 444  
490 +
491 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
492 +
493 +
445 445  (((
446 -Users can log in to the HP0D, able to access other Web Pages except for the miner page.
495 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
447 447  )))
448 448  
449 449  (((
450 -If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.
499 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
451 451  
501 +
452 452  
453 453  )))
454 454  
455 -== 7.3 Onboarding ~-~- Some parameters on the miner page show timeout ==
505 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
456 456  
457 457  
458 458  [[image:image-20220506182042-2.png||height="250" width="516"]]
... ... @@ -461,33 +461,36 @@
461 461  [[image:1651832455372-647.png||height="224" width="520"]]
462 462  
463 463  
464 -**HP0D is establishing a connection to the Helium server and is not finished. And you might see above.**
514 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
465 465  
466 -**It might relate to the network which might be up to 10mins.**
516 +**//It might relate to the network which might be up to 10mins.//**
467 467  
468 468  
469 -== 7.4 Onboarding – Bad Gateway ==
470 470  
520 +== **7.4 Onboarding – Bad Gateway** ==
471 471  
522 +
472 472  [[image:1651832583790-633.png]]
473 473  
474 474  
475 -**This is caused by the process leading too long which just needs to refresh the page.**
526 +//**This is caused by the process leading too long which just needs to refresh the page.**//
476 476  
477 477  
478 -== 7.5 Onboarding ~-~- Why did QR Code generate aways fail? ==
479 479  
530 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
480 480  
532 +
481 481  [[image:image-20220506182424-3.png]]
482 482  
483 483  
484 484  (((
485 -**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**
537 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
486 486  
539 +
487 487  
488 488  )))
489 489  
490 -== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? ==
543 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
491 491  
492 492  
493 493  [[image:1651832742262-209.png||height="297" width="365"]]
... ... @@ -494,12 +494,13 @@
494 494  
495 495  
496 496  (((
497 -**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**
550 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
498 498  
552 +
499 499  
500 500  )))
501 501  
502 -== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code ==
556 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
503 503  
504 504  
505 505  [[image:1651832811038-780.png||height="462" width="216"]]
... ... @@ -506,123 +506,135 @@
506 506  
507 507  
508 508  (((
509 -**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**
563 +//**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
510 510  
565 +
511 511  
512 512  )))
513 513  
514 -== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
569 +== **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
515 515  
516 516  
517 517  (((
518 -After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.
573 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
574 +
575 +
519 519  )))
520 520  
521 521  (((
522 -If you don't see the MAC address, make sure your mobile has a good internet connection.
579 +//**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
523 523  )))
524 524  
525 525  [[image:1651832880009-473.png]]
526 526  
527 527  
528 -== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ ==
529 529  
586 +== **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
530 530  
531 -This is caused by the server connection delay, which does not affect the regular use.
532 532  
589 +**//This is caused by the server connection delay, which does not affect the regular use.//**
590 +
533 533  [[image:1651832959907-357.png]]
534 534  
535 535  
536 -== 7.10 Mobile APP crash after scanning the QR Code? ==
537 537  
595 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
538 538  
539 -* Make sure you have input the correct Wallet address to generate QR Code.
540 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
541 -* Make sure your mobile app's relevant permission is enabled.
542 -* Known: The Android 11 version may cause this kind of issue.
543 543  
544 -== 7.11 Why the frequency/region is not the same as what I purchased? ==
598 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
599 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
600 +* //**Make sure your mobile app's relevant permission is enabled.**//
601 +* //**Known: The Android 11 version may cause this kind of issue.**//
545 545  
546 546  
604 +
605 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
606 +
607 +
547 547  (((
548 -Each HP0D is inspected and configured prior to shipping.
609 +//**Each HP0D is inspected and configured prior to shipping.**//
549 549  )))
550 550  
551 551  (((
552 -If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.
613 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
553 553  
615 +
554 554  
555 555  )))
556 556  
557 -== 7.12 Can use the frequency to a region where is no support? ==
619 +== **7.12 Can use the frequency to a region where is no support?** ==
558 558  
559 559  
560 560  (((
561 -Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
623 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
562 562  )))
563 563  
564 564  (((
565 565  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
566 566  
629 +
567 567  
568 568  )))
569 569  
570 -== 7.13 Can change the frequency of the HP0D Miner? ==
633 +== **7.13 Can change the frequency of the HP0D Miner?** ==
571 571  
572 572  
573 -We do not recommend doing this, it may damage your device
636 +//We do not recommend doing this, it may damage your device//
574 574  
575 575  
576 -== 7.14 Low Reward and not transmit issue ==
577 577  
640 +== **7.14 Low Reward and not transmit issue** ==
578 578  
579 -We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.
580 580  
581 -If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.
643 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
582 582  
645 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
583 583  
647 +
584 584  [[image:image-20220527114519-1.png||height="579" width="851"]]
585 585  
586 586  
587 -== 7.15 Why is my miner version not the latest ==
588 588  
652 +== **7.15 Why is my miner version not the latest** ==
589 589  
590 -By default, as soon as a new version of helium is released, we will push the upgrade the same day.
591 591  
592 -However, the download and upgrade may fail due to the network.
655 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
593 593  
657 +//However, the download and upgrade may fail due to the network.//
658 +
594 594  You can reboot your hotspot where the hotspot will try to upgrade when per booting.
595 595  
596 596  
597 -and **We offer manual check methods:**
662 +//and **We offer manual check methods:**//
598 598  
599 -*
600 -** Use the "(% style="color:blue" %)draginoups" (%%)command to check
664 + **// Use the "(% style="color:blue" %)draginoups" (%%)command to check//**
601 601  
602 -(% style="color:red" %)**Note: How to access the hotspot CLI refer to ( Such as **[[(% style="color: red; color: red" %)**Step 5**.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]](%%)** )**
603 603  
667 +(% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[(% style="color: red; color: red" %)**Step 5**//.//>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]//(%%)//** )**//
604 604  
669 +
605 605  [[image:image-20220601101358-1.png]]
606 606  
607 607  
608 -== 7.16 Why is my miner running down? ==
609 609  
674 +== **7.16 Why is my miner running down?** ==
610 610  
611 -the default, the Miner is managed by docker.
612 612  
613 -If you find the miner is offline where the miner is running down.
677 +//the default, the Miner is managed by docker.//
614 614  
679 +//If you find the miner is offline where the miner is running down.//
615 615  
681 +
616 616  **What You can do?**
617 617  
618 618  (% style="color:blue" %)**1. Reboot the hotspot and check again.**
619 619  
620 -Usually, if the miner is just down, then a reboot is the quickest way
686 +//Usually, if the miner is just down, then a reboot is the quickest way//
621 621  
622 622  
623 623  (% style="color:blue" %)**2. Reinstall the Miner manually.**
624 624  
625 -If rebooting does not solve the problem you can reinstall MINER by one of the following methods
691 +//If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
626 626  
627 627  (((
628 628   **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
... ... @@ -630,10 +630,11 @@
630 630  
631 631  
632 632  (((
633 - **2). Run the (% style="color:red" %)"minerup update"(%%) command to reinstall the miner**
699 + **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
634 634  )))
635 635  
636 636  
703 +
637 637  [[image:image-20220610094825-2.png||height="457" width="835"]]
638 638  
639 639  
... ... @@ -640,23 +640,24 @@
640 640  [[image:image-20220610094755-1.png||height="706" width="834"]]
641 641  
642 642  
643 -== 7.17 More commands for debugging. ==
644 644  
711 +== **7.17 More commands for debugging.** ==
645 645  
713 +
646 646  **I'm trapped somewhere, what can I do first?**
647 647  
648 648  
649 -dragino provides a method of self-testing
717 +//dragino provides a method of self-testing//
650 650  
651 -1). Is Hotspot's Miner running?
719 +//1.) Is Hotspot's Miner running?//
652 652  
653 -2). Is the miner version up to date?
721 +//2). Is the miner version up to date?//
654 654  
655 -3). Is the height gap between local height and remote height kept within 100
723 +//3). Is the height gap between local height and remote height kept within 100//
656 656  
657 657  
658 658  (((
659 -(% style="color:red" %)**Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command**
727 +(% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
660 660  )))
661 661  
662 662  
... ... @@ -663,11 +663,11 @@
663 663  (% class="box infomessage" %)
664 664  (((
665 665  (((
666 -**minerup update  #~-~-> reinstall miner but not clearing memory
734 +minerup update  #~-~-> reinstall miner but not clearing memory
667 667  minerup flush  #~-~->  reinstall miner and clear memory
668 668  minerup snap  #~-~->  load a snap_short to sync the block height
669 669  minerup gap  #~-~->  check the height between local and remote.
670 -draginoup  #~-~->  check the miner version gap between local and remote.**
738 +draginoup  #~-~->  check the miner version gap between local and remote.
671 671  )))
672 672  
673 673  (((
... ... @@ -675,21 +675,22 @@
675 675  )))
676 676  
677 677  (((
678 -**doker ps  #~-~-> show the miner running state
679 -miner versions  #~-~-> show the miner  version**
746 +doker ps  #~-~-> show the miner running state
747 +miner versions  #~-~-> show the miner  version
680 680  )))
681 681  )))
682 682  
683 683  
684 -== 7.18 Why does my hotspot not have some of the features described in this WiKi ==
685 685  
753 +== **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
686 686  
755 +
687 687  (((
688 -This is the result of the OTA not being updated in time
757 +//**This is the result of the OTA not being updated in time**//
689 689  )))
690 690  
691 691  (((
692 -You can reboot your hotspot or upgrade these packages manually.
761 +//**You can reboot your hotspot or upgrade these packages manually.**//
693 693  )))
694 694  
695 695  
... ... @@ -702,9 +702,10 @@
702 702  )))
703 703  
704 704  
705 -= 8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings =
706 706  
775 += **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
707 707  
777 +
708 708  The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
709 709  
710 710  So you have to re-flash the image into the SD card.
... ... @@ -712,17 +712,17 @@
712 712   (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
713 713  
714 714  
715 - (% style="color:blue" %)**Preparations:**
785 + (% style="color:blue" %)//**Preparations:**//
716 716  
717 -1. Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )
787 +1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
718 718  
719 -2. Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )
789 +2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
720 720  
721 -3. A card reader device
791 +3. //A card reader device//
722 722  
723 -4. A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )
793 +4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
724 724  
725 -5. SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**
795 +5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
726 726  
727 727  
728 728  (% style="color:blue" %)**HP0D's enclosure**
... ... @@ -734,34 +734,39 @@
734 734  [[image:image-20220615204917-2.png||height="1038" width="922"]]
735 735  
736 736  
737 -== (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ==
738 738  
808 +=== (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
739 739  
810 +
740 740  [[image:image-20220609111027-9.png]]
741 741  
742 742  
743 -== (% style="color:blue" %)**Step 2. Select the OS image **(%%) ==
744 744  
815 +=== (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
745 745  
817 +
746 746  [[image:image-20220609104907-8.png]]
747 747  
748 748  
749 -== (% style="color:blue" %)**Step 3. Select the target **(%%) ==
750 750  
822 +=== (% style="color:blue" %)**Step 3. Select the target **(%%) ===
751 751  
824 +
752 752  [[image:image-20220609104637-2.png]]
753 753  
754 754  [[image:image-20220609104701-3.png]]
755 755  
756 756  
757 -== (% style="color:blue" %)**Step 4. Flash start**(%%) ==
758 758  
831 +=== (% style="color:blue" %)**Step 4. Flash start**(%%) ===
759 759  
833 +
760 760  [[image:image-20220609104727-4.png]]
761 761  
762 762  [[image:image-20220609104741-5.png]]
763 763  
764 764  
839 +
765 765  === (% style="color:blue" %)**Flash Complete**(%%) ===
766 766  
767 767  
... ... @@ -768,33 +768,33 @@
768 768  [[image:image-20220609104415-1.png]]
769 769  
770 770  
771 -== (% style="color:blue" %)**Step 5. Re-install the SD card into the hotspot and boot it**(%%) ==
846 +== **Step 4. Re-install the SD card into the hotspot and boot it** ==
772 772  
773 773  
774 774  
775 -== (% style="color:blue" %)**Step 6. Configure the correct region for the miner**(%%) ==
850 +== **Step 5. Configure the correct region for the miner** ==
776 776  
777 777  
778 -by the default, the factory settings apply to the US915.
853 +**by the default, the factory settings apply to the US915.**
779 779  
780 -if your region is not the US915, you have to configure the correct region for the miner.
855 +**if your region is not the US915, you have to configure the correct region for the miner.**
781 781  
782 782  
783 -(% style="color:blue" %)**Access the hotspot CLI, and run these Linux commands:**
858 +**Access the hotspot CLI, and run these Linux commands**
784 784  
785 785  
786 786  (% class="box infomessage" %)
787 787  (((
788 788  (((
789 -**~#~##update the software of dragino**
864 +~#~##update the software of dragino
790 790  )))
791 791  
792 792  (((
793 -**apt update**
868 +apt update
794 794  )))
795 795  
796 796  (((
797 -**apt install dragino***
872 +apt install dragino*
798 798  )))
799 799  )))
800 800  
... ... @@ -805,19 +805,19 @@
805 805  (% class="box infomessage" %)
806 806  (((
807 807  (((
808 -**~#~##configure the correct region for the miner and update it**
883 +~#~##configure the correct region for the miner and update it
809 809  )))
810 810  
811 811  (((
812 -**uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>**
887 +uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
813 813  )))
814 814  
815 815  (((
816 -**uci commit miner**
891 +uci commit miner
817 817  )))
818 818  
819 819  (((
820 -**minerup update**
895 +minerup update
821 821  )))
822 822  )))
823 823  
... ... @@ -828,11 +828,11 @@
828 828  (% class="box infomessage" %)
829 829  (((
830 830  (((
831 -**~#~##check the miner version**
906 +~#~##check the miner version
832 832  )))
833 833  
834 834  (((
835 -**draginoups**
910 +draginoups
836 836  )))
837 837  )))
838 838  
... ... @@ -843,10 +843,10 @@
843 843  (% class="box infomessage" %)
844 844  (((
845 845  (((
846 -**~#~##unblock the function of wireless
921 +~#~##unblock the function of wireless
847 847  rfkill unblock wlan
848 848  uci set wireless.general.mode=ap
849 -uci commit wireless**
924 +uci commit wireless
850 850  )))
851 851  )))
852 852  
... ... @@ -853,32 +853,35 @@
853 853  [[image:image-20220609161204-1.png]]
854 854  
855 855  
856 -= 9. How does the HP0D access to the network via a USB 4G Dongle =
857 857  
932 += **9. How does the HP0D access to the network via a USB 4G Dongle** =
858 858  
934 +
859 859  We have reserved enough space inside the HP0D to use a USB 4G Dongle,
860 860  
861 861  so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
862 862  
863 863  
864 -(% style="color:green" %)**Preparations:**
940 +(% style="color:green" %)//**Preparations:**//
865 865  
866 -**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**
942 +//**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
867 867  
868 -**2). A Sim card that can access the 4g network.**
944 +//**2). A Sim card that can access the 4g network.**//
869 869  
870 -**3). open the hotspot's shell.**
946 +//**3). open the hotspot's shell.**//
871 871  
872 872  
873 -== 9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi. ==
874 874  
950 +== **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
875 875  
952 +
876 876  [[image:image-20220627153334-2.png]]
877 877  
878 878  
879 -== 9.2. Checking the USB 4G Dongle network ==
880 880  
957 +== **9.2. Checking the USB 4G Dongle network** ==
881 881  
959 +
882 882  (((
883 883  We have installed drivers for common USB 4G Dongle,
884 884  )))
... ... @@ -888,26 +888,27 @@
888 888  )))
889 889  
890 890  
891 -(% style="color:blue" %)**HUAWEI-E3327**
969 +(% style="color:blue" %)**//HUAWEI-E3327//**
892 892  
893 893  [[image:image-20220627154526-9.png||height="762" width="725"]]
894 894  
895 895  
896 896  
897 -(% style="color:blue" %)**ZTE**
975 +(% style="color:blue" %)**//ZTE//**
898 898  
899 899  [[image:image-20220627154201-5.png]]
900 900  
901 901  
902 -= 10. PoE introduction =
903 903  
981 += **10. PoE introduction** =
904 904  
983 +
905 905  (((
906 -The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)
985 +//The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
907 907  )))
908 908  
909 909  (((
910 -So you can use the PoE switches or PoE injector to power the device.
989 +//So you can use the PoE //switches// or PoE injector to power the device.//
911 911  )))
912 912  
913 913  
... ... @@ -921,13 +921,15 @@
921 921  [[image:image-20220616143347-1.png]]
922 922  
923 923  
924 -= 11. OTA Version Info =
925 925  
926 926  
1005 += **11. OTA Version Info** =
1006 +
1007 +
927 927  == **When does the OTA update happen?** ==
928 928  
929 929  
930 -HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info
1011 +**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
931 931  
932 932  
933 933  
... ... @@ -934,44 +934,51 @@
934 934  == **# 2022/05/14** ==
935 935  
936 936  
937 -1. Update to the latest miner version: miner-arm64_2022.05.13.0_GA
938 -1. Add postinst after auto-update
939 -1. Add Miner version mark.
940 -1. Add fast sync if miner GAP is large
1018 +1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
1019 +1. //Add postinst after auto-update//
1020 +1. //Add Miner version mark.//
1021 +1. //Add fast sync if miner GAP is large//
941 941  
1023 +
942 942  == **# 2022/05/18** ==
943 943  
944 944  
945 -1. Update minerup to speed up synchronized blocks
1027 +1. //Update minerup to speed up synchronized blocks//
946 946  
1029 +
947 947  == **# 2022/05/24** ==
948 948  
949 949  
950 -1. Update to the latest miner version: miner-arm64_2022.05.24.0_GA
1033 +1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
951 951  
1035 +
952 952  == **# 2022/05/31** ==
953 953  
954 954  
955 -1. Add WiFi STA icon display
956 -1. Optimize AP icon display
957 -1. Optimize home icon display
958 -1. Fix for Miner icon URL bug
959 -1. Add the secondary server configuration
1039 +1. //Add WiFi STA icon display//
1040 +1. //Optimize AP icon display//
1041 +1. //Optimize home icon display//
1042 +1. //Fix for Miner icon URL bug//
1043 +1. //Add the secondary server configuration//
960 960  
961 -= 12. Supports =
962 962  
963 963  
1047 +
1048 += **12. Supports** =
1049 +
1050 +
964 964  (((
965 -If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1052 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
966 966  )))
967 967  
968 968  (((
969 -With your question as detailed as possible. We will reply and help you in the shortest.
1056 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
970 970  
1058 +
971 971  
972 972  )))
973 973  
974 -= 13. Order Info =
1062 += **13. Order Info** =
975 975  
976 976  
977 977  (% style="color:blue" %)**HP0D-XXX**
... ... @@ -985,9 +985,11 @@
985 985  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
986 986  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
987 987  
988 -= 14. Manufacturer Info =
989 989  
990 990  
1078 += **14. Manufacturer Info** =
1079 +
1080 +
991 991  (((
992 992  **Shenzhen Dragino Technology Development co. LTD**
993 993  )))
... ... @@ -999,10 +999,11 @@
999 999  (((
1000 1000  Longcheng Street, LongGang District; Shenzhen 518116, China
1001 1001  
1092 +
1002 1002  
1003 1003  )))
1004 1004  
1005 -= 15. FCC Warning =
1096 += **15. FCC Warning** =
1006 1006  
1007 1007  
1008 1008  (((
image-20230208140653-10.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -281.6 KB
Content
image-20230208141050-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.5 KB
Content
image-20230208141511-12.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -256.7 KB
Content
image-20230208141702-13.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -306.7 KB
Content
image-20230208141743-14.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -287.7 KB
Content
image-20230208142457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.8 KB
Content
image-20230208142551-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
image-20230208142627-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.1 KB
Content
image-20230208142715-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.7 KB
Content
image-20230208142758-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20230509103835-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20230509103931-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -142.8 KB
Content