Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 198.3
edited by Xiaoling
on 2023/05/27 15:31
Change comment: There is no comment for this version
To version 179.1
edited by Kilight Cao
on 2023/02/08 13:54
Change comment: Uploaded new attachment "image-20230208135427-3.jpeg", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,52 +13,55 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= 1. Introduction =
16 += **1. Introduction** =
17 17  
18 -== 1.1 What is HP0D ==
19 19  
19 +== **1.1 What is HP0D** ==
20 20  
21 +
21 21  (((
22 22  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:blue" %)** miner feature from Helium** (%%) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:blue" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 27  )))
28 28  
29 29  (((
30 -(% style="color:blue" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (%%)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 31  )))
32 32  
33 33  (((
34 34  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35 -)))
36 36  
37 37  
38 -== 1.2 Specifications ==
38 +
39 +)))
39 39  
41 +== **1.2 Specifications** ==
40 40  
41 -(% style="color:blue" %)** Hardware System:**
42 42  
43 - **Linux Part:**
44 +**~ Hardware System:**
45 + Linux Part:
44 44  
45 45  * Raspberry Pi 4
46 46  
47 -(% style="color:blue" %)** Interface:**
49 +**~ Interface:**
48 48  
49 49  * 10M/100M RJ45 Ports x 1
50 50  * LoRaWAN Wireless
51 51  * Power Input: 12V 2A, DC
52 52  
53 -(% style="color:blue" %)** Operating Condition:**
55 +**~ Operating Condition:**
54 54  
55 55  * Work Temperature: -20 ~~ 65°C
56 56  * Storage Temperature: -20 ~~ 65°C
57 57  * Power Input: 12V 2A, DC
58 58  
59 -== 1.3 Features ==
60 60  
62 +== **1.3 Features** ==
61 61  
64 +
62 62  * Open-Source Linux system
63 63  * RPi4 with 2G /4G or 8G RAM
64 64  * Managed by Web GUI, SSH via Internet
... ... @@ -74,15 +74,17 @@
74 74  * Include prepaid $40 onboarding cost and $10 location cost.
75 75  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
76 76  
77 -== 1.4 Label info and login name ==
78 78  
81 +== **1.4 Label info and login name** ==
79 79  
83 +
80 80  [[image:1651803959860-394.png||height="500" width="375"]]
81 81  
82 82  
83 -=== 1.4.1 Label information: ===
84 84  
88 +=== **1.4.1 Label information:** ===
85 85  
90 +
86 86  (((
87 87  **Device hostname:**  (% style="background-color:yellow" %)dragino-xxxxxx(%%)
88 88  **Band**:  (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)
... ... @@ -94,19 +94,22 @@
94 94  )))
95 95  
96 96  
97 -= 2. Quick Start & Onboarding =
98 98  
103 += **2. Quick Start & Onboarding** =
99 99  
105 +
100 100  (((
101 101  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
102 102  )))
103 103  
104 104  
105 -== 2.1  Connect HP0D Web UI ==
106 106  
107 -=== 2.1.1 via HP0D's Access Point ===
112 +== **2.1  Connect HP0D Web UI** ==
108 108  
109 109  
115 +=== **2.1.1 via HP0D's Access Point** ===
116 +
117 +
110 110  At the first boot of HP0D, it will auto-generate a Wi-Fi network
111 111  
112 112  
... ... @@ -128,9 +128,10 @@
128 128  [[image:1651804397792-591.png||height="386" width="733"]]
129 129  
130 130  
131 -=== 2.1.2 Connect via HP0D hostname ===
132 132  
140 +=== **2.1.2 Connect via HP0D hostname** ===
133 133  
142 +
134 134  (((
135 135  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
136 136  )))
... ... @@ -141,16 +141,17 @@
141 141  [[image:1651804629009-699.png]]
142 142  
143 143  
144 -=== 2.1.3 Connect via Ethernet Port ===
145 145  
154 +=== **2.1.3 Connect via Ethernet Port** ===
146 146  
156 +
147 147  (((
148 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
158 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
149 149  )))
150 150  
151 151  
152 152  (((
153 -If you get the IP address from the router, like: (% class="mark" %)**10.130.2.42**(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.
163 +//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
154 154  )))
155 155  
156 156  
... ... @@ -157,15 +157,16 @@
157 157  [[image:1651804782523-623.png]]
158 158  
159 159  
160 -== 2.2 Generate QR Code ==
161 161  
171 +== **2.2 Generate QR Code** ==
162 162  
173 +
163 163  (((
164 -Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.
175 +//Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
165 165  )))
166 166  
167 167  (((
168 -(% style="color:red" %)**Note: After onboarding, this wallet will become the owner of this hotspot.**
179 +(% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
169 169  
170 170  
171 171  )))
... ... @@ -173,23 +173,24 @@
173 173  [[image:image-20220506140312-1.png||height="435" width="438"]]
174 174  
175 175  
176 -== 2.3 Onboarding Hotspot ==
177 177  
188 +== **2.3 Onboarding Hotspot** ==
178 178  
190 +
179 179  (((
180 -**1.** Download the Helium Hotspot APP from the Apple or Google Play store.
192 +//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
181 181  
182 182  
183 183  )))
184 184  
185 185  (((
186 -(% style="color:red" %)**Note: the APP version needs to be greater than 3.11.**
198 +(% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
187 187  
188 188  
189 189  )))
190 190  
191 191  (((
192 -**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**
204 +//**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
193 193  
194 194  
195 195  )))
... ... @@ -198,7 +198,7 @@
198 198  
199 199  
200 200  
201 -**3. **Scan the QR Code you generated in the previous step.
213 +//**3. **Scan the QR Code you generated in the previous step.//
202 202  
203 203  
204 204  [[image:1651828211026-220.png||height="405" width="191"]]
... ... @@ -206,7 +206,7 @@
206 206  
207 207  
208 208  (((
209 -**4. **Onboarding your device
221 +//**4. **Onboarding your device//
210 210  
211 211  
212 212  )))
... ... @@ -223,77 +223,35 @@
223 223  
224 224  
225 225  
226 -**5. **Check onboarding status where you can check from mobile:
238 +**5. **//Check onboarding status where you can check from mobile~://
227 227  
228 228  
229 229   [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
230 230  
231 231  
232 -You can also see the hotspot status in the below link:
244 +//You can also see the hotspot status in the below link~://
233 233  
234 -https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**
246 +//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
235 235  
236 -Example:
248 +//Example~://
237 237  
238 238  
239 -**Green Synced means hotspot works normally.**
251 +**//Green Synced means hotspot works normally.//**
240 240  
241 241  [[image:1651828427715-679.png||height="374" width="635"]]
242 242  
243 243  
244 -== 2.3 Onboarding Hotspot via Dragino App ==
245 245  
257 +== **2.3 Onboarding Hotspot via Dragino App** ==
246 246  
247 -(((
248 -**1.** Download the Dragino App from this link.
249 249  
250 -Users need to download two apps：**[[Dragino APP>>http://47.75.121.71:8899/Xiao/app-release.apk]]**and** [[Helium Wallet>>https://play.google.com/store/apps/details?id=com.helium.wallet.app]]  **(Android Version Only)
251 -)))
260 +== **2.4 Set the Port Forwarding** ==
252 252  
253 -(((
254 -
255 255  
256 -**2. **sign in helium account
257 -
258 -[[image:image-20230208142551-2.png||height="544" width="245"]] [[image:image-20230208142627-3.png||height="543" width="244"]]
259 -
260 -
261 -)))
262 -
263 263  (((
264 -**3. **To add a hotspot, select (% style="color:blue" %)**“+ add Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**
264 +//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
265 265  )))
266 266  
267 -[[image:image-20230208142457-1.png||height="554" width="249"]] [[image:image-20230208142715-4.png||height="552" width="248"]]
268 -
269 -
270 -4. Scan the QR Code you generated in the previous step.
271 -
272 -[[image:image-20230208142758-6.png||height="566" width="255"]]
273 -
274 -
275 -(((
276 -**5. **Onboarding your device
277 -)))
278 -
279 -(((
280 -Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
281 -
282 -[[image:image-20230208141050-11.png||height="572" width="258"]] [[image:image-20230208141511-12.jpeg||height="571" width="257"]]
283 -
284 -
285 -**6. **//Check onboarding status where you can check from mobile~://
286 -
287 -
288 -)))
289 -
290 -== 2.4 Set the Port Forwarding ==
291 -
292 -
293 -(((
294 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
295 -)))
296 -
297 297  [[image:1651828514449-658.png]]
298 298  
299 299  (((
... ... @@ -317,26 +317,30 @@
317 317  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
318 318  )))
319 319  
290 +
320 320  
321 321  )))
322 322  
323 -= 3. Check the configuration of HP0D =
294 += **3. Check the configuration of HP0D** =
324 324  
325 -== 3.1 LoRa frequency configuration ==
326 326  
297 +== **3.1 LoRa frequency configuration** ==
327 327  
299 +
328 328  [[image:1651828687205-178.png||height="323" width="657"]]
329 329  
330 330  
331 -== 3.2 Check the LoRaWAN Server Address ==
332 332  
304 +== **3.2 Check the LoRaWAN Server Address** ==
333 333  
306 +
334 334  [[image:image-20220607160428-1.png||height="472" width="654"]]
335 335  
336 336  
337 -== 3.2.1 Configure the Secondary LoRaWAN Server ==
338 338  
311 +== **3.2.1 Configure the Secondary LoRaWAN Server** ==
339 339  
313 +
340 340  [[image:image-20220607161130-2.png||height="501" width="1112"]]
341 341  
342 342  
... ... @@ -346,34 +346,37 @@
346 346  [[image:image-20220607161812-4.png||height="699" width="1115"]]
347 347  
348 348  
349 -== 3.3 Check Miner configuration ==
350 350  
324 +== **3.3 Check Miner configuration** ==
351 351  
352 -[[image:image-20230509103835-1.png||height="481" width="659"]]
353 353  
327 +[[image:image-20220506181408-1.png||height="451" width="513"]]
354 354  
329 +
355 355  (((
356 356  (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
357 357  
358 358  
359 -== 3.4 Check the Miner state ==
360 360  
335 +== **//3.4 Check the Miner state//** ==
361 361  
362 -[[image:image-20230509103931-2.png||height="636" width="1224"]]
363 363  
338 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
364 364  
340 +
365 365  (((
366 366  (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
367 367  )))
368 368  
345 +
369 369  
370 370  )))
371 371  
372 -= 4. Installation of Antenna =
349 += **4. Installation of Antenna** =
373 373  
374 374  
375 375  (((
376 -HP0D uses Fiber Glass Antenna.
353 +//HP0D uses Fiber Glass Antenna.//
377 377  )))
378 378  
379 379  [[image:1651832158606-882.png]]
... ... @@ -383,32 +383,33 @@
383 383  )))
384 384  
385 385  (((
386 -The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below:
363 +//The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
387 387  )))
388 388  
389 389  (((
390 390  [[image:1651832205608-998.png||height="349" width="198"]]
391 391  
369 +
392 392  
393 393  )))
394 394  
395 -= 5. SSH Access for Linux console =
373 += **5. SSH Access for Linux console** =
396 396  
397 397  
398 398  (((
399 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.
377 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
400 400  )))
401 401  
402 402  (((
403 -In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
381 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
404 404  )))
405 405  
406 406  (((
407 -You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.
385 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
408 408  )))
409 409  
410 410  (((
411 -Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.
389 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
412 412  )))
413 413  
414 414  
... ... @@ -418,25 +418,25 @@
418 418  
419 419  
420 420  (((
421 -**IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))**
399 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
422 422  )))
423 423  
424 424  (((
425 -**Port: ** (% style="color:green" %)**22**
403 +//Port:  (% style="color:green" %)**22**//
426 426  )))
427 427  
428 428  (((
429 -**User Name:  ** (% style="color:green" %)**root**
407 +//User Name:      (% style="color:green" %)**root**//
430 430  )))
431 431  
432 432  (((
433 -**Password:**         (% style="color:green" %)**Randomly generated （found on device's label）**
411 +//Password:         (% style="color:green" %)**Randomly generated （found on device's label）**//
434 434  
435 435  
436 436  )))
437 437  
438 438  (((
439 -After logging in, you will be in the Linux console and can enter commands as shown below.
417 +//After logging in, you will be in the Linux console and can enter commands as shown below.//
440 440  
441 441  
442 442  )))
... ... @@ -444,16 +444,17 @@
444 444  [[image:image-20220608202118-2.png]]
445 445  
446 446  
447 -= 6. How to change the Wireless function of HP0D =
448 448  
426 += **6. How to change the Wireless function of HP0D** =
449 449  
450 -The wireless function is configured as AP by default and the web page does not support configuration,
451 451  
452 -if you want to configure it as STA(client)connection mode,
429 +//The wireless function is configured as AP by default and the web page does not support configuration,//
453 453  
454 -you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.
431 +//if you want to configure it as STA(client)connection mode,//
455 455  
433 +//you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
456 456  
435 +
457 457  (% style="color:red" %)**//Note: the wireless state is as AP//**
458 458  
459 459  
... ... @@ -460,27 +460,31 @@
460 460  [[image:image-20220531170243-5.png||height="469" width="967"]]
461 461  
462 462  
463 -== 6.1 Access WiFi configuration page ==
464 464  
443 +== **6.1 Access WiFi configuration page** ==
465 465  
445 +
466 466  [[image:image-20220531165803-2.png]]
467 467  
468 468  
469 -== 6.2 Enter your WiFi information and save ==
470 470  
450 +== **6.2 Enter your WiFi information and save** ==
471 471  
452 +
472 472  [[image:image-20220531165958-3.png]]
473 473  
474 474  
475 -== 6.3 Change the WiFi mode ==
476 476  
457 +== **6.3 Change the WiFi mode.** ==
477 477  
459 +
478 478  [[image:image-20220531170131-4.png]]
479 479  
480 480  
481 -== 6.4 Wait system to restart ==
482 482  
464 +== **6.4 Wait system to restart** ==
483 483  
466 +
484 484  [[image:image-20220531170501-7.png]]
485 485  
486 486  
... ... @@ -487,34 +487,39 @@
487 487  (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
488 488  
489 489  
490 -== 6.5 Check the STA state ==
491 491  
474 +== **6.5 Check the STA state** ==
492 492  
476 +
493 493  [[image:image-20220531170705-8.png||height="484" width="990"]]
494 494  
495 495  
496 -= 7. Trouble Shootings =
497 497  
498 -== 7.1 How to get a wallet address? ==
481 += **7. Trouble Shootings** =
499 499  
500 500  
501 -**Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.**
484 +== **7.1 How to get a wallet address?** ==
502 502  
503 503  
504 -== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner ==
487 +**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
505 505  
506 506  
490 +
491 +== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
492 +
493 +
507 507  (((
508 -Users can log in to the HP0D, able to access other Web Pages except for the miner page.
495 +//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
509 509  )))
510 510  
511 511  (((
512 -If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.
499 +//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
513 513  
501 +
514 514  
515 515  )))
516 516  
517 -== 7.3 Onboarding ~-~- Some parameters on the miner page show timeout ==
505 +== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
518 518  
519 519  
520 520  [[image:image-20220506182042-2.png||height="250" width="516"]]
... ... @@ -523,33 +523,36 @@
523 523  [[image:1651832455372-647.png||height="224" width="520"]]
524 524  
525 525  
526 -**HP0D is establishing a connection to the Helium server and is not finished. And you might see above.**
514 +**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
527 527  
528 -**It might relate to the network which might be up to 10mins.**
516 +**//It might relate to the network which might be up to 10mins.//**
529 529  
530 530  
531 -== 7.4 Onboarding – Bad Gateway ==
532 532  
520 +== **7.4 Onboarding – Bad Gateway** ==
533 533  
522 +
534 534  [[image:1651832583790-633.png]]
535 535  
536 536  
537 -**This is caused by the process leading too long which just needs to refresh the page.**
526 +//**This is caused by the process leading too long which just needs to refresh the page.**//
538 538  
539 539  
540 -== 7.5 Onboarding ~-~- Why did QR Code generate aways fail? ==
541 541  
530 +== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
542 542  
532 +
543 543  [[image:image-20220506182424-3.png]]
544 544  
545 545  
546 546  (((
547 -**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**
537 +//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
548 548  
539 +
549 549  
550 550  )))
551 551  
552 -== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? ==
543 +== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
553 553  
554 554  
555 555  [[image:1651832742262-209.png||height="297" width="365"]]
... ... @@ -556,12 +556,13 @@
556 556  
557 557  
558 558  (((
559 -**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**
550 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
560 560  
552 +
561 561  
562 562  )))
563 563  
564 -== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code ==
556 +== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
565 565  
566 566  
567 567  [[image:1651832811038-780.png||height="462" width="216"]]
... ... @@ -568,125 +568,135 @@
568 568  
569 569  
570 570  (((
571 -**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**
563 +//**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
572 572  
565 +
573 573  
574 574  )))
575 575  
576 -== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
569 +== **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
577 577  
578 578  
579 579  (((
580 -**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**
573 +//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
581 581  
582 582  
583 583  )))
584 584  
585 585  (((
586 -**If you don't see the MAC address, make sure your mobile has a good internet connection.**
579 +//**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
587 587  )))
588 588  
589 589  [[image:1651832880009-473.png]]
590 590  
591 591  
592 -== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ ==
593 593  
586 +== **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
594 594  
595 -**This is caused by the server connection delay, which does not affect the regular use.**
596 596  
589 +**//This is caused by the server connection delay, which does not affect the regular use.//**
590 +
597 597  [[image:1651832959907-357.png]]
598 598  
599 599  
600 -== 7.10 Mobile APP crash after scanning the QR Code? ==
601 601  
595 +== **7.10 Mobile APP crash after scanning the QR Code?** ==
602 602  
603 -* **Make sure you have input the correct Wallet address to generate QR Code.**
604 -* **Make sure your mobile app uses the same wallet address as the one to generate QR Code.**
605 -* **Make sure your mobile app's relevant permission is enabled.**
606 -* **Known: The Android 11 version may cause this kind of issue.**
607 607  
608 -== 7.11 Why the frequency/region is not the same as what I purchased? ==
598 +* //**Make sure you have input the correct Wallet address to generate QR Code.**//
599 +* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
600 +* //**Make sure your mobile app's relevant permission is enabled.**//
601 +* //**Known: The Android 11 version may cause this kind of issue.**//
609 609  
610 610  
604 +
605 +== **7.11 Why the frequency/region is not the same as what I purchased?** ==
606 +
607 +
611 611  (((
612 -**Each HP0D is inspected and configured prior to shipping.**
609 +//**Each HP0D is inspected and configured prior to shipping.**//
613 613  )))
614 614  
615 615  (((
616 -**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**
613 +//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
617 617  
615 +
618 618  
619 619  )))
620 620  
621 -== 7.12 Can use the frequency to a region where is no support? ==
619 +== **7.12 Can use the frequency to a region where is no support?** ==
622 622  
623 623  
624 624  (((
625 -**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**
623 +//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
626 626  )))
627 627  
628 628  (((
629 629  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
630 630  
629 +
631 631  
632 632  )))
633 633  
634 -== 7.13 Can change the frequency of the HP0D Miner? ==
633 +== **7.13 Can change the frequency of the HP0D Miner?** ==
635 635  
636 636  
637 -We do not recommend doing this, it may damage your device
636 +//We do not recommend doing this, it may damage your device//
638 638  
639 639  
640 -== 7.14 Low Reward and not transmit issue ==
641 641  
640 +== **7.14 Low Reward and not transmit issue** ==
642 642  
643 -We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.
644 644  
645 -If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.
643 +//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
646 646  
645 +//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
647 647  
647 +
648 648  [[image:image-20220527114519-1.png||height="579" width="851"]]
649 649  
650 650  
651 -== 7.15 Why is my miner version not the latest ==
652 652  
652 +== **7.15 Why is my miner version not the latest** ==
653 653  
654 -By default, as soon as a new version of helium is released, we will push the upgrade the same day.
655 655  
656 -However, the download and upgrade may fail due to the network.
655 +//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
657 657  
657 +//However, the download and upgrade may fail due to the network.//
658 +
658 658  You can reboot your hotspot where the hotspot will try to upgrade when per booting.
659 659  
660 660  
661 -and **We offer manual check methods:**
662 +//and **We offer manual check methods:**//
662 662  
663 - ** Use the "(% style="color:blue" %)draginoups" (%%)command to check**
664 + **// Use the "(% style="color:blue" %)draginoups" (%%)command to check//**
664 664  
665 665  
666 -(% style="color:red" %)**Note: How to access the hotspot CLI refer to ( Such as **[[(% style="color: red; color: red" %)**Step 5**.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]](%%)** )**
667 +(% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[(% style="color: red; color: red" %)**Step 5**//.//>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]//(%%)//** )**//
667 667  
668 668  
669 669  [[image:image-20220601101358-1.png]]
670 670  
671 671  
672 -== 7.16 Why is my miner running down? ==
673 673  
674 +== **7.16 Why is my miner running down?** ==
674 674  
675 -the default, the Miner is managed by docker.
676 676  
677 -If you find the miner is offline where the miner is running down.
677 +//the default, the Miner is managed by docker.//
678 678  
679 +//If you find the miner is offline where the miner is running down.//
679 679  
681 +
680 680  **What You can do?**
681 681  
682 682  (% style="color:blue" %)**1. Reboot the hotspot and check again.**
683 683  
684 -Usually, if the miner is just down, then a reboot is the quickest way
686 +//Usually, if the miner is just down, then a reboot is the quickest way//
685 685  
686 686  
687 687  (% style="color:blue" %)**2. Reinstall the Miner manually.**
688 688  
689 -If rebooting does not solve the problem you can reinstall MINER by one of the following methods
691 +//If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
690 690  
691 691  (((
692 692   **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
... ... @@ -694,10 +694,11 @@
694 694  
695 695  
696 696  (((
697 - **2). Run the (% style="color:red" %)"minerup update"(%%) command to reinstall the miner**
699 + **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
698 698  )))
699 699  
700 700  
703 +
701 701  [[image:image-20220610094825-2.png||height="457" width="835"]]
702 702  
703 703  
... ... @@ -704,23 +704,24 @@
704 704  [[image:image-20220610094755-1.png||height="706" width="834"]]
705 705  
706 706  
707 -== 7.17 More commands for debugging. ==
708 708  
711 +== **7.17 More commands for debugging.** ==
709 709  
713 +
710 710  **I'm trapped somewhere, what can I do first?**
711 711  
712 712  
713 -dragino provides a method of self-testing
717 +//dragino provides a method of self-testing//
714 714  
715 -1.) Is Hotspot's Miner running?
719 +//1.) Is Hotspot's Miner running?//
716 716  
717 -2). Is the miner version up to date?
721 +//2). Is the miner version up to date?//
718 718  
719 -3). Is the height gap between local height and remote height kept within 100
723 +//3). Is the height gap between local height and remote height kept within 100//
720 720  
721 721  
722 722  (((
723 -(% style="color:red" %)**Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command**
727 +(% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
724 724  )))
725 725  
726 726  
... ... @@ -745,15 +745,16 @@
745 745  )))
746 746  
747 747  
748 -== 7.18 Why does my hotspot not have some of the features described in this WiKi ==
749 749  
753 +== **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
750 750  
755 +
751 751  (((
752 -**This is the result of the OTA not being updated in time**
757 +//**This is the result of the OTA not being updated in time**//
753 753  )))
754 754  
755 755  (((
756 -**You can reboot your hotspot or upgrade these packages manually.**
761 +//**You can reboot your hotspot or upgrade these packages manually.**//
757 757  )))
758 758  
759 759  
... ... @@ -766,9 +766,10 @@
766 766  )))
767 767  
768 768  
769 -= 8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings =
770 770  
775 += **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
771 771  
777 +
772 772  The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
773 773  
774 774  So you have to re-flash the image into the SD card.
... ... @@ -922,9 +922,10 @@
922 922  [[image:image-20220609161204-1.png]]
923 923  
924 924  
925 -= 9. How does the HP0D access to the network via a USB 4G Dongle =
926 926  
932 += **9. How does the HP0D access to the network via a USB 4G Dongle** =
927 927  
934 +
928 928  We have reserved enough space inside the HP0D to use a USB 4G Dongle,
929 929  
930 930  so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
... ... @@ -939,15 +939,17 @@
939 939  //**3). open the hotspot's shell.**//
940 940  
941 941  
942 -== 9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi. ==
943 943  
950 +== **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
944 944  
952 +
945 945  [[image:image-20220627153334-2.png]]
946 946  
947 947  
948 -== 9.2. Checking the USB 4G Dongle network ==
949 949  
957 +== **9.2. Checking the USB 4G Dongle network** ==
950 950  
959 +
951 951  (((
952 952  We have installed drivers for common USB 4G Dongle,
953 953  )))
... ... @@ -957,26 +957,27 @@
957 957  )))
958 958  
959 959  
960 -(% style="color:blue" %)**HUAWEI-E3327**
969 +(% style="color:blue" %)**//HUAWEI-E3327//**
961 961  
962 962  [[image:image-20220627154526-9.png||height="762" width="725"]]
963 963  
964 964  
965 965  
966 -(% style="color:blue" %)**ZTE**
975 +(% style="color:blue" %)**//ZTE//**
967 967  
968 968  [[image:image-20220627154201-5.png]]
969 969  
970 970  
971 -= 10. PoE introduction =
972 972  
981 += **10. PoE introduction** =
973 973  
983 +
974 974  (((
975 -The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)
985 +//The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
976 976  )))
977 977  
978 978  (((
979 -So you can use the PoE switches or PoE injector to power the device.
989 +//So you can use the PoE //switches// or PoE injector to power the device.//
980 980  )))
981 981  
982 982  
... ... @@ -990,9 +990,11 @@
990 990  [[image:image-20220616143347-1.png]]
991 991  
992 992  
993 -= 11. OTA Version Info =
994 994  
995 995  
1005 += **11. OTA Version Info** =
1006 +
1007 +
996 996  == **When does the OTA update happen?** ==
997 997  
998 998  
... ... @@ -1009,7 +1009,6 @@
1009 1009  1. //Add fast sync if miner GAP is large//
1010 1010  
1011 1011  
1012 -
1013 1013  == **# 2022/05/18** ==
1014 1014  
1015 1015  
... ... @@ -1016,7 +1016,6 @@
1016 1016  1. //Update minerup to speed up synchronized blocks//
1017 1017  
1018 1018  
1019 -
1020 1020  == **# 2022/05/24** ==
1021 1021  
1022 1022  
... ... @@ -1023,7 +1023,6 @@
1023 1023  1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
1024 1024  
1025 1025  
1026 -
1027 1027  == **# 2022/05/31** ==
1028 1028  
1029 1029  
... ... @@ -1035,20 +1035,22 @@
1035 1035  
1036 1036  
1037 1037  
1038 -= 12. Supports =
1039 1039  
1048 += **12. Supports** =
1040 1040  
1050 +
1041 1041  (((
1042 -If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1052 +**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1043 1043  )))
1044 1044  
1045 1045  (((
1046 -With your question as detailed as possible. We will reply and help you in the shortest.
1056 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1047 1047  
1058 +
1048 1048  
1049 1049  )))
1050 1050  
1051 -= 13. Order Info =
1062 += **13. Order Info** =
1052 1052  
1053 1053  
1054 1054  (% style="color:blue" %)**HP0D-XXX**
... ... @@ -1064,7 +1064,7 @@
1064 1064  
1065 1065  
1066 1066  
1067 -= 14. Manufacturer Info =
1078 += **14. Manufacturer Info** =
1068 1068  
1069 1069  
1070 1070  (((
... ... @@ -1078,10 +1078,11 @@
1078 1078  (((
1079 1079  Longcheng Street, LongGang District; Shenzhen 518116, China
1080 1080  
1092 +
1081 1081  
1082 1082  )))
1083 1083  
1084 -= 15. FCC Warning =
1096 += **15. FCC Warning** =
1085 1085  
1086 1086  
1087 1087  (((
image-20230208135618-5.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -276.2 KB
Content
image-20230208135657-7.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20230208135730-8.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -306.7 KB
Content
image-20230208140312-9.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -191.0 KB
Content
image-20230208140653-10.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -281.6 KB
Content
image-20230208141050-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.5 KB
Content
image-20230208141511-12.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -256.7 KB
Content
image-20230208141702-13.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -306.7 KB
Content
image-20230208141743-14.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -287.7 KB
Content
image-20230208142457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.8 KB
Content
image-20230208142551-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
image-20230208142627-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.1 KB
Content
image-20230208142715-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.7 KB
Content
image-20230208142758-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20230509103835-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20230509103931-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -142.8 KB
Content