Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 198.2
edited by Xiaoling
on 2023/05/27 15:15
Change comment: There is no comment for this version
To version 167.1
edited by Xiaoye
on 2022/06/27 15:39
Change comment: Uploaded new attachment "image-20220627153958-4.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D Full Hotspot for Helium User Manual
1 +HP0D Full Hotspot for Helium
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -3,7 +3,7 @@
3 3  
4 4  
5 5  (((
6 -
6 +**HP0D Full Hotspot for Helium User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -13,21 +13,20 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= 1. Introduction =
16 += **1. Introduction** =
17 17  
18 -== 1.1 What is HP0D ==
18 +== **1.1 What is HP0D** ==
19 19  
20 -
21 21  (((
22 22  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:blue" %)** miner feature from Helium** (%%) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:blue" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
25 +HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 27  )))
28 28  
29 29  (((
30 -(% style="color:blue" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (%%)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
29 +(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 31  )))
32 32  
33 33  (((
... ... @@ -34,10 +34,8 @@
34 34  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35 35  )))
36 36  
36 +== **1.2 Specifications** ==
37 37  
38 -== 1.2 Specifications ==
39 -
40 -
41 41  **~ Hardware System:**
42 42   Linux Part:
43 43  
... ... @@ -57,7 +57,6 @@
57 57  
58 58  == **1.3 Features** ==
59 59  
60 -
61 61  * Open-Source Linux system
62 62  * RPi4 with 2G /4G or 8G RAM
63 63  * Managed by Web GUI, SSH via Internet
... ... @@ -75,37 +75,30 @@
75 75  
76 76  == **1.4 Label info and login name** ==
77 77  
78 -
79 79  [[image:1651803959860-394.png||height="500" width="375"]]
80 80  
81 81  
82 -=== **1.4.1 Label information:** ===
83 83  
78 +=== 1.4.1 Label information: ===
84 84  
85 -(((
86 -**Device hostname:**  (% style="background-color:yellow" %)dragino-xxxxxx(%%)
87 -**Band**:  (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)
88 -**Miner animal name**:  (% style="background-color:yellow" %)xxx-xxx-xxx (%%)
89 -**Miner address**:  (% style="background-color:yellow" %)12xxxxxx (%%)
90 -**Eth MAC address**:  (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)
91 -**Login**:  (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)
92 -**SN**:  (% style="background-color:yellow" %) device serial number.
93 -)))
80 +**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 +**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 +**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 +**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 +**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 +**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 +**SN**:  (% class="mark" %)device serial number.
94 94  
95 95  
96 96  = **2. Quick Start & Onboarding** =
97 97  
98 -
99 -(((
100 100  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
101 -)))
102 102  
103 103  
104 104  == **2.1  Connect HP0D Web UI** ==
105 105  
106 -=== **2.1.1 via HP0D's Access Point** ===
96 +=== **2.1.1 via HP0D’s Access Point** ===
107 107  
108 -
109 109  At the first boot of HP0D, it will auto-generate a Wi-Fi network
110 110  
111 111  
... ... @@ -114,12 +114,12 @@
114 114  
115 115  (% class="box infomessage" %)
116 116  (((
117 - called  : (% style="color:red" %)**//HPD-dragino-xxxxxx//**
106 + called  : **//HPD-dragino-xxxxxx//**
118 118  )))
119 119  
120 120  (% class="box infomessage" %)
121 121  (((
122 - with password:  (% style="color:red" %)**//dragino+dragino//**(%%)
111 + with password:  **//dragino+dragino//**
123 123  You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
124 124  )))
125 125  
... ... @@ -129,28 +129,19 @@
129 129  
130 130  === **2.1.2 Connect via HP0D hostname** ===
131 131  
121 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
132 132  
133 -(((
134 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.
135 -)))
123 + Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
136 136  
137 - Like:  (% style="background-color:yellow" %)__**//http:~/~/dragino-4ba54a//**__
138 138  
139 -
140 140  [[image:1651804629009-699.png]]
141 141  
142 -
143 143  === **2.1.3 Connect via Ethernet Port** ===
144 144  
130 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
145 145  
146 -(((
147 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
148 -)))
149 149  
150 -
151 -(((
152 152  //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
153 -)))
154 154  
155 155  
156 156  [[image:1651804782523-623.png]]
... ... @@ -160,11 +160,11 @@
160 160  
161 161  
162 162  (((
163 -//Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
143 +//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
164 164  )))
165 165  
166 166  (((
167 -(% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
147 +//Note: After onboarding, this wallet will become the owner of this hotspot.//
168 168  
169 169  
170 170  )))
... ... @@ -177,18 +177,16 @@
177 177  
178 178  (((
179 179  //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
180 -
181 -
182 182  )))
183 183  
184 184  (((
185 -(% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
163 +**//Note: the APP version needs to be greater than 3.11.//**
186 186  
187 187  
188 188  )))
189 189  
190 190  (((
191 -//**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
169 +//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
192 192  
193 193  
194 194  )))
... ... @@ -196,22 +196,17 @@
196 196   [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
197 197  
198 198  
199 -
200 200  //**3. **Scan the QR Code you generated in the previous step.//
201 201  
202 -
203 203  [[image:1651828211026-220.png||height="405" width="191"]]
204 204  
205 205  
206 -
207 207  (((
208 208  //**4. **Onboarding your device//
209 -
210 -
211 211  )))
212 212  
213 213  (((
214 -Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
187 +Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
215 215  
216 216  
217 217  )))
... ... @@ -221,10 +221,8 @@
221 221   [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
222 222  
223 223  
224 -
225 225  **5. **//Check onboarding status where you can check from mobile~://
226 226  
227 -
228 228   [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
229 229  
230 230  
... ... @@ -240,52 +240,6 @@
240 240  [[image:1651828427715-679.png||height="374" width="635"]]
241 241  
242 242  
243 -== **2.3 Onboarding Hotspot via Dragino App** ==
244 -
245 -
246 -(((
247 -//**1.** Download the Dragino App from this link.//
248 -
249 -//Users need to download two apps：//**[[Dragino APP>>http://47.75.121.71:8899/Xiao/app-release.apk]]**and** [[Helium Wallet>>https://play.google.com/store/apps/details?id=com.helium.wallet.app]]  **(Android Version Only)
250 -)))
251 -
252 -(((
253 -
254 -
255 -//**2. **sign in helium account //
256 -
257 -[[image:image-20230208142551-2.png||height="544" width="245"]] [[image:image-20230208142627-3.png||height="543" width="244"]]
258 -)))
259 -
260 -(((
261 -//**3. **To add a hotspot, select (% style="color:blue" %)**“+ add Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
262 -)))
263 -
264 -
265 -[[image:image-20230208142457-1.png||height="554" width="249"]] [[image:image-20230208142715-4.png||height="552" width="248"]]
266 -
267 -
268 -//4. Scan the QR Code you generated in the previous step.//
269 -
270 -[[image:image-20230208142758-6.png||height="566" width="255"]]
271 -
272 -(((
273 -//**5. **Onboarding your device//
274 -
275 -
276 -)))
277 -
278 -(((
279 -Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.  
280 -
281 -[[image:image-20230208141050-11.png||height="572" width="258"]] [[image:image-20230208141511-12.jpeg||height="571" width="257"]]
282 -
283 -
284 -**6. **//Check onboarding status where you can check from mobile~://
285 -
286 -
287 -)))
288 -
289 289  == **2.4 Set the Port Forwarding** ==
290 290  
291 291  
... ... @@ -300,21 +300,15 @@
300 300  )))
301 301  
302 302  (((
303 -(((
304 -(% style="color:red" %)**Note: Please refer to more detailed Settings**
228 +Note: Please refer to more detailed Settings
305 305  )))
306 -)))
307 307  
308 308  (((
309 -(((
310 310  [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
311 311  )))
312 -)))
313 313  
314 314  (((
315 -(((
316 316  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
317 -)))
318 318  
319 319  
320 320  )))
... ... @@ -335,7 +335,6 @@
335 335  
336 336  == **3.2.1 Configure the Secondary LoRaWAN Server** ==
337 337  
338 -
339 339  [[image:image-20220607161130-2.png||height="501" width="1112"]]
340 340  
341 341  
... ... @@ -345,27 +345,29 @@
345 345  [[image:image-20220607161812-4.png||height="699" width="1115"]]
346 346  
347 347  
348 -== **3.3 Check Miner configuration** ==
349 349  
350 350  
268 +== **3.3 Check Miner configuration** ==
351 351  
352 -[[image:image-20230509103835-1.png||height="481" width="659"]]
353 353  
271 +[[image:image-20220506181408-1.png||height="451" width="513"]]
354 354  
355 355  (((
356 -(% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
274 +//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
357 357  
358 358  
359 -== **3.4 Check the Miner state** ==
277 +== **//3.4 Check the Miner state//** ==
360 360  
361 361  
362 -[[image:image-20230509103931-2.png||height="636" width="1224"]]
280 +[[image:image-20220531171836-9.png||height="776" width="1155"]]
363 363  
364 364  
365 -(((
366 -(% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly The p2p network can see how your hotspot is interacting with the surrounding hotspots usually, the nat_type should be '**//(% style="color:blue" %)**//none'//**
367 -)))
283 +//**Note: Absorption status can show whether the hotspot is working properly**//
368 368  
285 +//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 +
287 + //usually, the nat_type should be '**none'**//
288 +
369 369  
370 370  )))
371 371  
... ... @@ -383,7 +383,7 @@
383 383  )))
384 384  
385 385  (((
386 -//The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
306 +//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
387 387  )))
388 388  
389 389  (((
... ... @@ -395,21 +395,13 @@
395 395  = **5. SSH Access for Linux console** =
396 396  
397 397  
398 -(((
399 399  //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
400 -)))
401 401  
402 -(((
403 403  //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
404 -)))
405 405  
406 -(((
407 407  //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
408 -)))
409 409  
410 -(((
411 411  //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
412 -)))
413 413  
414 414  
415 415  Below are screenshots:
... ... @@ -416,13 +416,12 @@
416 416  
417 417  [[image:image-20220608202027-1.png]]
418 418  
419 -
420 420  (((
421 421  **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
422 422  )))
423 423  
424 424  (((
425 -//Port:  (% style="color:green" %)**22**//
336 +//Port:  22//
426 426  )))
427 427  
428 428  (((
... ... @@ -430,7 +430,7 @@
430 430  )))
431 431  
432 432  (((
433 -//Password:         (% style="color:green" %)**Randomly generated （found on device's label）**//
344 +//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
434 434  
435 435  
436 436  )))
... ... @@ -446,17 +446,15 @@
446 446  
447 447  = **6. How to change the Wireless function of HP0D** =
448 448  
449 -
450 450  //The wireless function is configured as AP by default and the web page does not support configuration,//
451 451  
452 452  //if you want to configure it as STA(client)connection mode,//
453 453  
454 -//you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
364 +//you can configure your WiFi info on the** /Network/WiFi **page.//
455 455  
456 456  
457 -(% style="color:red" %)**//Note: the wireless state is as AP//**
367 +**//Note: the wireless state is as AP//**
458 458  
459 -
460 460  [[image:image-20220531170243-5.png||height="469" width="967"]]
461 461  
462 462  
... ... @@ -477,7 +477,6 @@
477 477  
478 478  [[image:image-20220531170131-4.png]]
479 479  
480 -
481 481  == **6.4 Wait system to restart** ==
482 482  
483 483  
... ... @@ -484,7 +484,7 @@
484 484  [[image:image-20220531170501-7.png]]
485 485  
486 486  
487 -(% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
395 +//**Note: When the time remaining is finished it will turn to the home page.**//
488 488  
489 489  
490 490  == **6.5 Check the STA state** ==
... ... @@ -519,7 +519,6 @@
519 519  
520 520  [[image:image-20220506182042-2.png||height="250" width="516"]]
521 521  
522 -
523 523  [[image:1651832455372-647.png||height="224" width="520"]]
524 524  
525 525  
... ... @@ -551,12 +551,11 @@
551 551  
552 552  == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
553 553  
554 -
555 555  [[image:1651832742262-209.png||height="297" width="365"]]
556 556  
557 557  
558 558  (((
559 -//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
465 +//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
560 560  
561 561  
562 562  )))
... ... @@ -568,12 +568,12 @@
568 568  
569 569  
570 570  (((
571 -//**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
477 +//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
572 572  
573 573  
574 574  )))
575 575  
576 -== **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
482 +== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
577 577  
578 578  
579 579  (((
... ... @@ -583,13 +583,13 @@
583 583  )))
584 584  
585 585  (((
586 -//**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
492 +//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
587 587  )))
588 588  
589 589  [[image:1651832880009-473.png]]
590 590  
591 591  
592 -== **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
498 +== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
593 593  
594 594  
595 595  **//This is caused by the server connection delay, which does not affect the regular use.//**
... ... @@ -602,7 +602,7 @@
602 602  
603 603  * //**Make sure you have input the correct Wallet address to generate QR Code.**//
604 604  * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
605 -* //**Make sure your mobile app's relevant permission is enabled.**//
511 +* //**Make sure your mobile app’s relevant permission is enabled.**//
606 606  * //**Known: The Android 11 version may cause this kind of issue.**//
607 607  
608 608  == **7.11 Why the frequency/region is not the same as what I purchased?** ==
... ... @@ -644,7 +644,6 @@
644 644  
645 645  //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
646 646  
647 -
648 648  [[image:image-20220527114519-1.png||height="579" width="851"]]
649 649  
650 650  
... ... @@ -660,18 +660,17 @@
660 660  
661 661  //and **We offer manual check methods:**//
662 662  
663 - **// Use the "(% style="color:blue" %)draginoups" (%%)command to check//**
568 + **// Use the "draginoups" command to check//**
664 664  
665 665  
666 -(% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[(% style="color: red; color: red" %)**Step 5**//.//>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]//(%%)//** )**//
571 +**//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
667 667  
668 -
669 669  [[image:image-20220601101358-1.png]]
670 670  
671 671  
576 +
672 672  == **7.16 Why is my miner running down?** ==
673 673  
674 -
675 675  //the default, the Miner is managed by docker.//
676 676  
677 677  //If you find the miner is offline where the miner is running down.//
... ... @@ -679,29 +679,24 @@
679 679  
680 680  **What You can do?**
681 681  
682 -(% style="color:blue" %)**1. Reboot the hotspot and check again.**
586 +**~1. Reboot the hotspot and check again.**
683 683  
684 684  //Usually, if the miner is just down, then a reboot is the quickest way//
685 685  
686 686  
687 -(% style="color:blue" %)**2. Reinstall the Miner manually.**
591 +**2. Reinstall the Miner manually.**
688 688  
689 689  //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
690 690  
691 -(((
692 692   **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
693 -)))
694 694  
695 695  
696 -(((
697 - **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
698 -)))
598 + **2). Run the "//minerup updat//e" command to reinstall the miner**
699 699  
700 700  
701 701  
702 702  [[image:image-20220610094825-2.png||height="457" width="835"]]
703 703  
704 -
705 705  [[image:image-20220610094755-1.png||height="706" width="834"]]
706 706  
707 707  
... ... @@ -720,64 +720,50 @@
720 720  //3). Is the height gap between local height and remote height kept within 100//
721 721  
722 722  
723 -(((
724 -(% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
725 -)))
622 +**//Note: You can find the above three points on the Miner page, and //**
726 726  
624 +**//If you are familiar with the Linux command line you can use the following command//**
727 727  
626 +
728 728  (% class="box infomessage" %)
729 729  (((
730 -(((
731 731  minerup update  #~-~-> reinstall miner but not clearing memory
732 732  minerup flush  #~-~->  reinstall miner and clear memory
733 733  minerup snap  #~-~->  load a snap_short to sync the block height
734 734  minerup gap  #~-~->  check the height between local and remote.
735 735  draginoup  #~-~->  check the miner version gap between local and remote.
736 -)))
737 737  
738 -(((
739 -
740 -)))
741 741  
742 -(((
743 743  doker ps  #~-~-> show the miner running state
744 744  miner versions  #~-~-> show the miner  version
745 745  )))
746 -)))
747 747  
748 748  
749 749  == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
750 750  
751 751  
752 -(((
753 753  //**This is the result of the OTA not being updated in time**//
754 -)))
755 755  
756 -(((
757 757  //**You can reboot your hotspot or upgrade these packages manually.**//
758 -)))
759 759  
760 760  
761 761  (% class="box infomessage" %)
762 762  (((
763 -(((
764 764  **apt update**
765 765  **apt install dragino***
766 766  )))
767 -)))
768 768  
769 769  
770 770  = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
771 771  
772 -
773 773  The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
774 774  
775 775  So you have to re-flash the image into the SD card.
776 776  
777 - (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
662 +**Warning:  Do not reset unless necessary**
778 778  
779 779  
780 - (% style="color:blue" %)//**Preparations:**//
665 +//**Preparations:**//
781 781  
782 782  1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
783 783  
... ... @@ -790,7 +790,7 @@
790 790  5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
791 791  
792 792  
793 -(% style="color:blue" %)**HP0D's enclosure**
678 +**HP0D's enclosure**
794 794  
795 795  
796 796  [[image:image-20220615204902-1.png||height="633" width="918"]]
... ... @@ -800,41 +800,37 @@
800 800  
801 801  
802 802  
803 -=== (% style="color:blue" %)**Step 1.  Formatting the SD Card**(%%) ===
688 +=== **Step 1.  Formatting the SD Card** ===
804 804  
805 805  
806 806  [[image:image-20220609111027-9.png]]
807 807  
808 808  
694 +=== **Step 2. Select the OS image ** ===
809 809  
810 -=== (% style="color:blue" %)**Step 2. Select the OS image **(%%) ===
811 811  
812 -
813 813  [[image:image-20220609104907-8.png]]
814 814  
815 815  
700 +=== **Step 3. Select the target ** ===
816 816  
817 -=== (% style="color:blue" %)**Step 3. Select the target **(%%) ===
818 818  
819 -
820 820  [[image:image-20220609104637-2.png]]
821 821  
822 822  [[image:image-20220609104701-3.png]]
823 823  
824 824  
708 +=== **Step 4. Flash start** ===
825 825  
826 -=== (% style="color:blue" %)**Step 4. Flash start**(%%) ===
827 827  
828 -
829 829  [[image:image-20220609104727-4.png]]
830 830  
831 831  [[image:image-20220609104741-5.png]]
832 832  
833 833  
716 +=== **Flash Complete** ===
834 834  
835 -=== (% style="color:blue" %)**Flash Complete**(%%) ===
836 836  
837 -
838 838  [[image:image-20220609104415-1.png]]
839 839  
840 840  
... ... @@ -841,10 +841,8 @@
841 841  == **Step 4. Re-install the SD card into the hotspot and boot it** ==
842 842  
843 843  
844 -
845 845  == **Step 5. Configure the correct region for the miner** ==
846 846  
847 -
848 848  **by the default, the factory settings apply to the US915.**
849 849  
850 850  **if your region is not the US915, you have to configure the correct region for the miner.**
... ... @@ -855,18 +855,12 @@
855 855  
856 856  (% class="box infomessage" %)
857 857  (((
858 -(((
859 859  ~#~##update the software of dragino
860 -)))
861 861  
862 -(((
863 863  apt update
864 -)))
865 865  
866 -(((
867 867  apt install dragino*
868 868  )))
869 -)))
870 870  
871 871  [[image:image-20220609150452-2.png||height="348" width="909"]]
872 872  
... ... @@ -874,133 +874,66 @@
874 874  
875 875  (% class="box infomessage" %)
876 876  (((
877 -(((
878 878  ~#~##configure the correct region for the miner and update it
879 -)))
880 880  
881 -(((
882 882  uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
883 -)))
884 884  
885 -(((
886 886  uci commit miner
887 -)))
888 888  
889 -(((
890 890  minerup update
891 891  )))
892 -)))
893 893  
894 894  [[image:image-20220609151513-5.png]]
895 895  
896 896  
897 -
898 898  (% class="box infomessage" %)
899 899  (((
900 -(((
901 901  ~#~##check the miner version
902 -)))
903 903  
904 -(((
905 905  draginoups
906 906  )))
907 -)))
908 908  
909 909  [[image:image-20220609151419-3.png]]
910 910  
911 911  
912 -
913 913  (% class="box infomessage" %)
914 914  (((
915 -(((
916 916  ~#~##unblock the function of wireless
917 917  rfkill unblock wlan
918 918  uci set wireless.general.mode=ap
919 919  uci commit wireless
920 920  )))
921 -)))
922 922  
923 923  [[image:image-20220609161204-1.png]]
924 924  
925 925  
926 -= **9. How does the HP0D access to the network via a USB 4G Dongle** =
783 += **9. PoE introduction** =
927 927  
928 928  
929 -We have reserved enough space inside the HP0D to use a USB 4G Dongle,
786 +//The HP0D is use the **IEEE 802.3 af compliant PoE port** (input 44 ~~ 57 v, output 12V)//
930 930  
931 -so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
932 -
933 -
934 -(% style="color:green" %)//**Preparations:**//
935 -
936 -//**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
937 -
938 -//**2). A Sim card that can access the 4g network.**//
939 -
940 -//**3). open the hotspot's shell.**//
941 -
942 -
943 -== **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
944 -
945 -
946 -[[image:image-20220627153334-2.png]]
947 -
948 -
949 -== **9.2. Checking the USB 4G Dongle network** ==
950 -
951 -
952 -(((
953 -We have installed drivers for common USB 4G Dongle,
954 -)))
955 -
956 -(((
957 -and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
958 -)))
959 -
960 -
961 -(% style="color:blue" %)**//HUAWEI-E3327//**
962 -
963 -[[image:image-20220627154526-9.png||height="762" width="725"]]
964 -
965 -
966 -
967 -(% style="color:blue" %)**//ZTE//**
968 -
969 -[[image:image-20220627154201-5.png]]
970 -
971 -
972 -= **10. PoE introduction** =
973 -
974 -
975 -(((
976 -//The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
977 -)))
978 -
979 -(((
980 980  //So you can use the PoE //switches// or PoE injector to power the device.//
981 -)))
982 982  
983 983  
984 -(((
985 -(% style="color:red" %)**Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
986 -)))
791 +**Note: The RJ45 Indicator light only represents the PoE power supply, **
987 987  
793 +**so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
988 988  
989 - (% style="background-color:yellow" %)**Wiring schematic:**
990 990  
796 +**Wiring schematic:**
797 +
991 991  [[image:image-20220616143347-1.png]]
992 992  
993 993  
994 -= **11. OTA Version Info** =
995 995  
996 996  
803 += **10. OTA Version Info** =
804 +
997 997  == **When does the OTA update happen?** ==
998 998  
999 999  
1000 1000  **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
1001 1001  
1002 -
1003 -
1004 1004  == **# 2022/05/14** ==
1005 1005  
1006 1006  
... ... @@ -1021,7 +1021,6 @@
1021 1021  
1022 1022  == **# 2022/05/31** ==
1023 1023  
1024 -
1025 1025  1. //Add WiFi STA icon display//
1026 1026  1. //Optimize AP icon display//
1027 1027  1. //Optimize home icon display//
... ... @@ -1028,9 +1028,8 @@
1028 1028  1. //Fix for Miner icon URL bug//
1029 1029  1. //Add the secondary server configuration//
1030 1030  
1031 -= **12. Supports** =
836 += **11. Supports** =
1032 1032  
1033 -
1034 1034  (((
1035 1035  **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
1036 1036  )))
... ... @@ -1041,23 +1041,21 @@
1041 1041  
1042 1042  )))
1043 1043  
1044 -= **13. Order Info** =
848 += **12. Order Info** =
1045 1045  
850 +(% style="color:#0000ff" %)**HP0D-XXX**
1046 1046  
1047 -(% style="color:blue" %)**HP0D-XXX**
852 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
1048 1048  
1049 -(% style="color:blue" %)**XXX**(%%): Frequency Band
854 +* **AS923**: LoRaWAN AS923 band
855 +* **AU915**: LoRaWAN AU915 band
856 +* **EU868**: LoRaWAN EU868 band
857 +* **KR920**: LoRaWAN KR920 band
858 +* **US915**: LoRaWAN US915 band
859 +* **IN865**: LoRaWAN IN865 band
1050 1050  
1051 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1052 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1053 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1054 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1055 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1056 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
861 += **13. Manufacturer Info** =
1057 1057  
1058 -= **14. Manufacturer Info** =
1059 -
1060 -
1061 1061  (((
1062 1062  **Shenzhen Dragino Technology Development co. LTD**
1063 1063  )))
... ... @@ -1069,12 +1069,12 @@
1069 1069  (((
1070 1070  Longcheng Street, LongGang District; Shenzhen 518116, China
1071 1071  
874 +
1072 1072  
1073 1073  )))
1074 1074  
1075 -= **15. FCC Warning** =
878 += **14. FCC Warning** =
1076 1076  
1077 -
1078 1078  (((
1079 1079  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1080 1080  )))
... ... @@ -1101,7 +1101,4 @@
1101 1101  
1102 1102  (((
1103 1103  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1104 -
1105 -
1106 -
1107 1107  )))
image-20220627154201-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -74.0 KB
Content
image-20220627154412-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -74.0 KB
Content
image-20220627154459-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -74.0 KB
Content
image-20220627154526-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.1 KB
Content
image-20220917101946-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.4 KB
Content
image-20230208133611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -287.7 KB
Content
image-20230208134413-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -151.1 KB
Content
image-20230208135427-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -318.9 KB
Content
image-20230208135618-5.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -276.2 KB
Content
image-20230208135657-7.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20230208135730-8.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -306.7 KB
Content
image-20230208140312-9.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -191.0 KB
Content
image-20230208140653-10.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -281.6 KB
Content
image-20230208141050-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.5 KB
Content
image-20230208141511-12.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -256.7 KB
Content
image-20230208141702-13.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -306.7 KB
Content
image-20230208141743-14.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -287.7 KB
Content
image-20230208142457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.8 KB
Content
image-20230208142551-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
image-20230208142627-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.1 KB
Content
image-20230208142715-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.7 KB
Content
image-20230208142758-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20230509103835-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20230509103931-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -142.8 KB
Content