Changes for page HP0D -- Full Hotspot for Helium User Manual

Last modified by Xiaoling on 2024/10/21 15:44

From 197.1 to 198.1 From 198.4 to 198.5

From version 198.1

edited by Kilight Cao
on 2023/05/09 10:41

Change comment: There is no comment for this version

To version 198.4

edited by Xiaoling
on 2023/05/27 15:42

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Kilight
++XWiki.Xiaoling

Content

@@ -13,9 +13,9 @@
  {{toc/}}
--= **1. Introduction** =
++= 1. Introduction =
--== **1.1 What is HP0D** ==
++== 1.1 What is HP0D ==
  (((
@@ -23,34 +23,34 @@
  )))
  (((
--HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
++HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:blue" %)** miner feature from Helium** (%%) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:blue" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
  )))
  (((
--(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
++(% style="color:blue" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (%%)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
  )))
  (((
  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
--
--
  )))
--== **1.2 Specifications** ==
++== 1.2 Specifications ==
--**~   Hardware System:**
--         Linux Part:
++(% style="color:blue" %)**   Hardware System:**
++
++      **Linux Part:**
++
  * Raspberry Pi 4
--**~   Interface:**
++(% style="color:blue" %)**   Interface:**
  * 10M/100M RJ45 Ports x 1
  * LoRaWAN Wireless
  * Power Input: 12V 2A, DC
--**~   Operating Condition:**
++(% style="color:blue" %)**   Operating Condition:**
  * Work Temperature: -20 ~~ 65°C
  * Storage Temperature: -20 ~~ 65°C
@@ -57,9 +57,10 @@
  * Power Input: 12V 2A, DC
--== **1.3 Features** ==
++== 1.3 Features ==
++
  * Open-Source Linux system
  * RPi4 with 2G /4G or 8G RAM
  * Managed by Web GUI, SSH via Internet
@@ -76,27 +76,34 @@
  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
--== **1.4 Label info and login name** ==
++== 1.4 Label info and login name ==
++
  [[image:1651803959860-394.png||height="500" width="375"]]
--=== **1.4.1 Label information:** ===
++=== 1.4.1 Label information: ===
  (((
--**Device hostname:**        (% style="background-color:yellow" %)dragino-xxxxxx(%%)
--**Band**:                             (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)
--**Miner animal name**:     (% style="background-color:yellow" %)xxx-xxx-xxx (%%)
--**Miner address**:             (% style="background-color:yellow" %)12xxxxxx (%%)
--**Eth MAC address**:         (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)
--**Login**:                           (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)
--**SN**:                                (% style="background-color:yellow" %) device serial number.
++**Device hostname:        (% style="background-color:yellow" %)dragino-xxxxxx (%%)**
++
++**Band:                             (% style="background-color:yellow" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 (%%)**
++
++**Miner animal name:     (% style="background-color:yellow" %)xxx-xxx-xxx (%%)**
++
++**Miner address:             (% style="background-color:yellow" %)12xxxxxx (%%)**
++
++**Eth MAC address:         (% style="background-color:yellow" %)A8: 40: 41: EF: FE: CD (%%)**
++
++**Login:                           (% style="background-color:yellow" %) root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) (%%)**
++
++**SN:                                (% style="background-color:yellow" %) device serial number.(%%)**
  )))
--= **2. Quick Start & Onboarding** =
++= 2. Quick Start & Onboarding =
  (((
@@ -104,9 +104,9 @@
  )))
--== **2.1  Connect HP0D Web UI** ==
++== 2.1  Connect HP0D Web UI ==
--=== **2.1.1 via HP0D's Access Point** ===
++=== 2.1.1 via HP0D's Access Point ===
  At the first boot of HP0D, it will auto-generate a Wi-Fi network
@@ -130,7 +130,7 @@
  [[image:1651804397792-591.png||height="386" width="733"]]
--=== **2.1.2 Connect via HP0D hostname** ===
++=== 2.1.2 Connect via HP0D hostname ===
  (((
@@ -143,16 +143,16 @@
  [[image:1651804629009-699.png]]
--=== **2.1.3 Connect via Ethernet Port** ===
++=== 2.1.3 Connect via Ethernet Port ===
  (((
--//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
++Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
  )))
  (((
--//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
++If you get the IP address from the router, like: (% class="mark" %)**10.130.2.42**(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.
  )))
@@ -159,15 +159,15 @@
  [[image:1651804782523-623.png]]
--== **2.2 Generate QR Code** ==
++== 2.2 Generate QR Code ==
  (((
--//Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
++Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.
  )))
  (((
--(% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
++(% style="color:red" %)**Note: After onboarding, this wallet will become the owner of this hotspot.**
  )))
@@ -175,23 +175,23 @@
  [[image:image-20220506140312-1.png||height="435" width="438"]]
--== **2.3 Onboarding Hotspot** ==
++== 2.3 Onboarding Hotspot ==
  (((
--//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
++**1.** Download the Helium Hotspot APP from the Apple or Google Play store.
  )))
  (((
--(% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
++(% style="color:red" %)**Note: the APP version needs to be greater than 3.11.**
  )))
  (((
--//**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
++**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**
  )))
@@ -200,7 +200,7 @@
--//**3. **Scan the QR Code you generated in the previous step.//
++**3. **Scan the QR Code you generated in the previous step.
  [[image:1651828211026-220.png||height="405" width="191"]]
@@ -208,7 +208,7 @@
  (((
--//**4. **Onboarding your device//
++**4. **Onboarding your device
  )))
@@ -225,57 +225,57 @@
--**5. **//Check onboarding status where you can check from mobile~://
++**5. **Check onboarding status where you can check from mobile:
   [[image:1651828391664-884.png||height="413" width="197"]]    [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
--//You can also see the hotspot status in the below link~://
++You can also see the hotspot status in the below link:
--//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
++https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**
--//Example~://
++Example:
--**//Green Synced means hotspot works normally.//**
++**Green Synced means hotspot works normally.**
  [[image:1651828427715-679.png||height="374" width="635"]]
--== **2.3 Onboarding Hotspot via Dragino App** ==
++== 2.3 Onboarding Hotspot via Dragino App ==
  (((
--//**1.** Download the Dragino App from this link.//
++**1.** Download the Dragino App from this link.
--//Users need to download two apps：//**[[Dragino APP>>http://47.75.121.71:8899/Xiao/app-release.apk]]**and** [[Helium Wallet>>https://play.google.com/store/apps/details?id=com.helium.wallet.app]]  **(Android Version Only)
++Users need to download two apps：**[[Dragino APP>>http://47.75.121.71:8899/Xiao/app-release.apk]]**and** [[Helium Wallet>>https://play.google.com/store/apps/details?id=com.helium.wallet.app]]  **(Android Version Only)
  )))
  (((
--//**2. **sign in helium account //
++**2. **sign in helium account
  [[image:image-20230208142551-2.png||height="544" width="245"]]    [[image:image-20230208142627-3.png||height="543" width="244"]]
++
++
  )))
  (((
--//**3. **To add a hotspot, select (% style="color:blue" %)**“+ add Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
++**3. **To add a hotspot, select (% style="color:blue" %)**“+ add Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**
  )))
--
  [[image:image-20230208142457-1.png||height="554" width="249"]]   [[image:image-20230208142715-4.png||height="552" width="248"]]
--//4. Scan the QR Code you generated in the previous step.//
++**4.** Scan the QR Code you generated in the previous step.
  [[image:image-20230208142758-6.png||height="566" width="255"]]
--(((
--//**5. **Onboarding your device//
--
++(((
++**5. **Onboarding your device
  )))
  (((
@@ -289,11 +289,11 @@
  )))
--== **2.4 Set the Port Forwarding** ==
++== 2.4 Set the Port Forwarding ==
  (((
--//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
++Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
  )))
  [[image:1651828514449-658.png]]
@@ -322,21 +322,21 @@
  )))
--= **3. Check the configuration of HP0D** =
++= 3. Check the configuration of HP0D =
--== **3.1 LoRa frequency configuration** ==
++== 3.1 LoRa frequency configuration ==
  [[image:1651828687205-178.png||height="323" width="657"]]
--== **3.2 Check the LoRaWAN Server Address** ==
++== 3.2 Check the LoRaWAN Server Address ==
  [[image:image-20220607160428-1.png||height="472" width="654"]]
--== **3.2.1 Configure the Secondary LoRaWAN Server** ==
++== 3.2.1 Configure the Secondary LoRaWAN Server ==
  [[image:image-20220607161130-2.png||height="501" width="1112"]]
@@ -348,10 +348,9 @@
  [[image:image-20220607161812-4.png||height="699" width="1115"]]
--== **3.3 Check Miner configuration** ==
++== 3.3 Check Miner configuration ==
--
  [[image:image-20230509103835-1.png||height="481" width="659"]]
@@ -359,7 +359,7 @@
  (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
--== **3.4 Check the Miner state** ==
++== 3.4 Check the Miner state ==
  [[image:image-20230509103931-2.png||height="636" width="1224"]]
@@ -372,11 +372,11 @@
  )))
--= **4. Installation of Antenna** =
++= 4. Installation of Antenna =
  (((
--//HP0D uses Fiber Glass Antenna.//
++HP0D uses Fiber Glass Antenna.
  )))
  [[image:1651832158606-882.png]]
@@ -386,7 +386,7 @@
  )))
  (((
--//The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
++The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below:
  )))
  (((
@@ -395,23 +395,23 @@
  )))
--= **5. SSH Access for Linux console** =
++= 5. SSH Access for Linux console =
  (((
--//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
++Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.
  )))
  (((
--//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
++In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.
  )))
  (((
--//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
++You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.
  )))
  (((
--//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
++Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.
  )))
@@ -421,25 +421,25 @@
  (((
--**//IP address:     IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
++**IP address:     IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))**
  )))
  (((
--//Port:                  (% style="color:green" %)**22**//
++**Port: **                 (% style="color:green" %)**22**
  )))
  (((
--//User Name:      (% style="color:green" %)**root**//
++**User Name:  **    (% style="color:green" %)**root**
  )))
  (((
--//Password:         (% style="color:green" %)**Randomly generated （found on device's label）**//
++**Password:**         (% style="color:green" %)**Randomly generated （found on device's label）**
  )))
  (((
--//After logging in, you will be in the Linux console and can enter commands as shown below.//
++After logging in, you will be in the Linux console and can enter commands as shown below.
  )))
@@ -447,14 +447,14 @@
  [[image:image-20220608202118-2.png]]
--= **6. How to change the Wireless function of HP0D** =
++= 6. How to change the Wireless function of HP0D =
--//The wireless function is configured as AP by default and the web page does not support configuration,//
++The wireless function is configured as AP by default and the web page does not support configuration,
--//if you want to configure it as STA(client)connection mode,//
++if you want to configure it as STA(client)connection mode,
--//you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.//
++you can configure your WiFi info on the** (% style="color:blue" %)/Network/WiFi (%%)**page.
  (% style="color:red" %)**//Note: the wireless state is as AP//**
@@ -463,25 +463,25 @@
  [[image:image-20220531170243-5.png||height="469" width="967"]]
--== **6.1 Access WiFi configuration page** ==
++== 6.1 Access WiFi configuration page ==
  [[image:image-20220531165803-2.png]]
--== **6.2 Enter your WiFi information and save** ==
++== 6.2 Enter your WiFi information and save ==
  [[image:image-20220531165958-3.png]]
--== **6.3 Change the WiFi mode.** ==
++== 6.3 Change the WiFi mode ==
  [[image:image-20220531170131-4.png]]
--== **6.4 Wait system to restart** ==
++== 6.4 Wait system to restart ==
  [[image:image-20220531170501-7.png]]
@@ -490,34 +490,34 @@
  (% style="color:red" %)//**Note: When the time remaining is finished it will turn to the home page.**//
--== **6.5 Check the STA state** ==
++== 6.5 Check the STA state ==
  [[image:image-20220531170705-8.png||height="484" width="990"]]
--= **7. Trouble Shootings** =
++= 7. Trouble Shootings =
--== **7.1 How to get a wallet address?** ==
++== 7.1 How to get a wallet address? ==
--**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
++Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.
--== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
++== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner ==
  (((
--//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
++Users can log in to the HP0D, able to access other Web Pages except for the miner page.
  )))
  (((
--//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
++If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.
  )))
--== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
++== 7.3 Onboarding ~-~- Some parameters on the miner page show timeout ==
  [[image:image-20220506182042-2.png||height="250" width="516"]]
@@ -526,21 +526,21 @@
  [[image:1651832455372-647.png||height="224" width="520"]]
--**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
++**HP0D is establishing a connection to the Helium server and is not finished. And you might see above.**
--**//It might relate to the network which might be up to 10mins.//**
++**It might relate to the network which might be up to 10mins.**
--== **7.4 Onboarding – Bad Gateway** ==
++== 7.4 Onboarding – Bad Gateway ==
  [[image:1651832583790-633.png]]
--//**This is caused by the process leading too long which just needs to refresh the page.**//
++**This is caused by the process leading too long which just needs to refresh the page.**
--== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
++== 7.5 Onboarding ~-~- Why did QR Code generate aways fail? ==
  [[image:image-20220506182424-3.png]]
@@ -547,12 +547,12 @@
  (((
--//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
++**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**
  )))
--== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
++== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? ==
  [[image:1651832742262-209.png||height="297" width="365"]]
@@ -559,12 +559,12 @@
  (((
--//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**//
++**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of (% style="color:red" %)‘Clean’(%%) to re-generate the QR Code.**
  )))
--== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
++== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code ==
  [[image:1651832811038-780.png||height="462" width="216"]]
@@ -571,62 +571,61 @@
  (((
--//**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**//
++**If you see the MAC Address shows the (% style="color:red" %)‘Unknown’(%%) where is due to the provisioning error, please contact us to help you solve it.**
  )))
--== **7.8 Onboarding – MAC address is being refreshed after scanning the QR Code** ==
++== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
  (((
--//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
--
--
++After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.
  )))
  (((
--//**If you don't see the MAC address, make sure your mobile has a good internet connection.**//
++If you don't see the MAC address, make sure your mobile has a good internet connection.
  )))
  [[image:1651832880009-473.png]]
--== **7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’** ==
++== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ ==
--**//This is caused by the server connection delay, which does not affect the regular use.//**
++This is caused by the server connection delay, which does not affect the regular use.
  [[image:1651832959907-357.png]]
--== **7.10 Mobile APP crash after scanning the QR Code?** ==
++== 7.10 Mobile APP crash after scanning the QR Code? ==
--* //**Make sure you have input the correct Wallet address to generate QR Code.**//
--* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
--* //**Make sure your mobile app's relevant permission is enabled.**//
--* //**Known: The Android 11 version may cause this kind of issue.**//
++* Make sure you have input the correct Wallet address to generate QR Code.
++* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
++* Make sure your mobile app's relevant permission is enabled.
++* Known: The Android 11 version may cause this kind of issue.
--== **7.11 Why the frequency/region is not the same as what I purchased?** ==
++== 7.11 Why the frequency/region is not the same as what I purchased? ==
++
  (((
--//**Each HP0D is inspected and configured prior to shipping.**//
++Each HP0D is inspected and configured prior to shipping.
  )))
  (((
--//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
++If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.
  )))
--== **7.12 Can use the frequency to a region where is no support?** ==
++== 7.12 Can use the frequency to a region where is no support? ==
  (((
--//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
++Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:
  )))
  (((
@@ -635,50 +635,50 @@
  )))
--== **7.13 Can change the frequency of the HP0D Miner?** ==
++== 7.13 Can change the frequency of the HP0D Miner? ==
--//We do not recommend doing this, it may damage your device//
++We do not recommend doing this, it may damage your device
--== **7.14 Low Reward and not transmit issue** ==
++== 7.14 Low Reward and not transmit issue ==
--//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
++We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.
--//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
++If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.
  [[image:image-20220527114519-1.png||height="579" width="851"]]
--== **7.15 Why is my miner version not the latest** ==
++== 7.15 Why is my miner version not the latest ==
--//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
++By default, as soon as a new version of helium is released, we will push the upgrade the same day.
--//However, the download and upgrade may fail due to the network.//
++However, the download and upgrade may fail due to the network.
  You can reboot your hotspot where the hotspot will try to upgrade when per booting.
--//and **We offer manual check methods:**//
++and **We offer manual check methods:**
--         **// Use the "(% style="color:blue" %)draginoups" (%%)command to check//**
++*
++** Use the "(% style="color:blue" %)draginoups" (%%)command to check
++(% style="color:red" %)**Note: How to access the hotspot CLI refer to ( Such as **[[(% style="color: red; color: red" %)**Step 5**.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]](%%)** )**
--(% style="color:red" %)**//Note: How to access the hotspot CLI refer to ( Such as //**//[[(% style="color: red; color: red" %)**Step 5**//.//>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]//(%%)//** )**//
--
  [[image:image-20220601101358-1.png]]
--== **7.16 Why is my miner running down?** ==
++== 7.16 Why is my miner running down? ==
--//the default, the Miner is managed by docker.//
++the default, the Miner is managed by docker.
--//If you find the miner is offline where the miner is running down.//
++If you find the miner is offline where the miner is running down.
  **What You can do?**
@@ -685,12 +685,12 @@
  (% style="color:blue" %)**1. Reboot the hotspot and check again.**
--//Usually, if the miner is just down, then a reboot is the quickest way//
++Usually, if the miner is just down, then a reboot is the quickest way
  (% style="color:blue" %)**2. Reinstall the Miner manually.**
--//If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
++If rebooting does not solve the problem you can reinstall MINER by one of the following methods
  (((
        **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
@@ -698,11 +698,10 @@
  (((
--      **2). Run the (% style="color:red" %)"//minerup updat//e"(%%) command to reinstall the miner**
++      **2). Run the (% style="color:red" %)"minerup update"(%%) command to reinstall the miner**
  )))
--
  [[image:image-20220610094825-2.png||height="457" width="835"]]
@@ -709,23 +709,23 @@
  [[image:image-20220610094755-1.png||height="706" width="834"]]
--== **7.17 More commands for debugging.** ==
++== 7.17 More commands for debugging. ==
  **I'm trapped somewhere, what can I do first?**
--//dragino provides a method of self-testing//
++dragino provides a method of self-testing
--//1.) Is Hotspot's Miner running?//
++1.) Is Hotspot's Miner running?
--//2). Is the miner version up to date?//
++2). Is the miner version up to date?
--//3). Is the height gap between local height and remote height kept within 100//
++3). Is the height gap between local height and remote height kept within 100
  (((
--(% style="color:red" %)**//Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command//**
++(% style="color:red" %)**Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command**
  )))
@@ -732,11 +732,11 @@
  (% class="box infomessage" %)
  (((
  (((
--minerup update  #~-~-> reinstall miner but not clearing memory
++**minerup update  #~-~-> reinstall miner but not clearing memory
  minerup flush     #~-~->  reinstall miner and clear memory
  minerup snap     #~-~->  load a snap_short to sync the block height
  minerup gap      #~-~->  check the height between local and remote.
--draginoup          #~-~->  check the miner version gap between local and remote.
++draginoup          #~-~->  check the miner version gap between local and remote.**
  )))
  (((
@@ -744,21 +744,21 @@
  )))
  (((
--doker ps            #~-~-> show the miner running state
--miner versions   #~-~-> show the miner  version
++**doker ps            #~-~-> show the miner running state
++miner versions   #~-~-> show the miner  version**
  )))
  )))
--== **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
++== 7.18 Why does my hotspot not have some of the features described in this WiKi ==
  (((
--//**This is the result of the OTA not being updated in time**//
++This is the result of the OTA not being updated in time
  )))
  (((
--//**You can reboot your hotspot or upgrade these packages manually.**//
++You can reboot your hotspot or upgrade these packages manually.
  )))
@@ -771,7 +771,7 @@
  )))
--= **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
++= 8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings =
  The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
@@ -781,17 +781,17 @@
   (% style="background-color:yellow" %)**Warning:  Do not reset unless necessary**
-- (% style="color:blue" %)//**Preparations:**//
++ (% style="color:blue" %)**Preparations:**
--1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
++1. Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )
--2. //Download the OS image~:  ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
++2. Download the OS image~:  ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )
--3. //A card reader device//
++3. A card reader device
--4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
++4. A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )
--5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
++5. SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**
  (% style="color:blue" %)**HP0D's enclosure**
@@ -842,33 +842,33 @@
  [[image:image-20220609104415-1.png]]
--== **Step 4. Re-install the SD card into the hotspot and boot it** ==
++== (% style="color:blue" %)**Step 5. Re-install the SD card into the hotspot and boot it**(%%) ==
--== **Step 5. Configure the correct region for the miner** ==
++== (% style="color:blue" %)**Step 6. Configure the correct region for the miner**(%%) ==
--**by the default, the factory settings apply to the US915.**
++by the default, the factory settings apply to the US915.
--**if your region is not the US915, you have to configure the correct region for the miner.**
++if your region is not the US915, you have to configure the correct region for the miner.
--**Access the hotspot CLI, and run these Linux commands**
++(% style="color:blue" %)**Access the hotspot CLI, and run these Linux commands:**
  (% class="box infomessage" %)
  (((
  (((
--~#~##update the software of dragino
++**~#~##update the software of dragino**
  )))
  (((
--apt update
++**apt update**
  )))
  (((
--apt install dragino*
++**apt install dragino***
  )))
  )))
@@ -879,19 +879,19 @@
  (% class="box infomessage" %)
  (((
  (((
--~#~##configure the correct region for the miner and update it
++**~#~##configure the correct region for the miner and update it**
  )))
  (((
--uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
++**uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>**
  )))
  (((
--uci commit miner
++**uci commit miner**
  )))
  (((
--minerup update
++**minerup update**
  )))
  )))
@@ -902,11 +902,11 @@
  (% class="box infomessage" %)
  (((
  (((
--~#~##check the miner version
++**~#~##check the miner version**
  )))
  (((
--draginoups
++**draginoups**
  )))
  )))
@@ -917,10 +917,10 @@
  (% class="box infomessage" %)
  (((
  (((
--~#~##unblock the function of wireless
++**~#~##unblock the function of wireless
  rfkill unblock wlan
  uci set wireless.general.mode=ap
--uci commit wireless
++uci commit wireless**
  )))
  )))
@@ -927,7 +927,7 @@
  [[image:image-20220609161204-1.png]]
--= **9. How does the HP0D access to the network via a USB 4G Dongle** =
++= 9. How does the HP0D access to the network via a USB 4G Dongle =
  We have reserved enough space inside the HP0D to use a USB 4G Dongle,
@@ -935,22 +935,22 @@
  so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
--(% style="color:green" %)//**Preparations:**//
++(% style="color:green" %)**Preparations:**
--//**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
++**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**
--//**2). A Sim card that can access the 4g network.**//
++**2). A Sim card that can access the 4g network.**
--//**3). open the hotspot's shell.**//
++**3). open the hotspot's shell.**
--== **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
++== 9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi. ==
  [[image:image-20220627153334-2.png]]
--== **9.2. Checking the USB 4G Dongle network** ==
++== 9.2. Checking the USB 4G Dongle network ==
  (((
@@ -962,26 +962,26 @@
  )))
--(% style="color:blue" %)**//HUAWEI-E3327//**
++(% style="color:blue" %)**HUAWEI-E3327**
  [[image:image-20220627154526-9.png||height="762" width="725"]]
--(% style="color:blue" %)**//ZTE//**
++(% style="color:blue" %)**ZTE**
  [[image:image-20220627154201-5.png]]
--= **10. PoE introduction** =
++= 10. PoE introduction =
  (((
--//The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)//
++The HP0D is use the (% style="color:blue" %)**IEEE 802.3 af compliant PoE port**(%%) (input 44 ~~ 57 v, output 12V)
  )))
  (((
--//So you can use the PoE //switches// or PoE injector to power the device.//
++So you can use the PoE switches or PoE injector to power the device.
  )))
@@ -995,13 +995,13 @@
  [[image:image-20220616143347-1.png]]
--= **11. OTA Version Info** =
++= 11. OTA Version Info =
  == **When does the OTA update happen?** ==
--**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
++HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info
@@ -1008,48 +1008,52 @@
  == **# 2022/05/14** ==
--1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
--1. //Add postinst after auto-update//
--1. //Add Miner version mark.//
--1. //Add fast sync if miner GAP is large//
++1. Update to the latest miner version: miner-arm64_2022.05.13.0_GA
++1. Add postinst after auto-update
++1. Add Miner version mark.
++1. Add fast sync if miner GAP is large
++
  == **# 2022/05/18** ==
--1. //Update minerup to speed up synchronized blocks//
++1. Update minerup to speed up synchronized blocks
++
  == **# 2022/05/24** ==
--1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
++1. Update to the latest miner version: miner-arm64_2022.05.24.0_GA
++
  == **# 2022/05/31** ==
--1. //Add WiFi STA icon display//
--1. //Optimize AP icon display//
--1. //Optimize home icon display//
--1. //Fix for Miner icon URL bug//
--1. //Add the secondary server configuration//
++1. Add WiFi STA icon display
++1. Optimize AP icon display
++1. Optimize home icon display
++1. Fix for Miner icon URL bug
++1. Add the secondary server configuration
--= **12. Supports** =
++= 12. Supports =
++
  (((
--**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
++If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
  )))
  (((
--**//With your question as detailed as possible. We will reply and help you in the shortest.//**
++With your question as detailed as possible. We will reply and help you in the shortest.
  )))
--= **13. Order Info** =
++= 13. Order Info =
  (% style="color:blue" %)**HP0D-XXX**
@@ -1064,9 +1064,10 @@
  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
--= **14. Manufacturer Info** =
++= 14. Manufacturer Info =
++
  (((
  **Shenzhen Dragino Technology Development co. LTD**
  )))
@@ -1081,7 +1081,7 @@
  )))
--= **15. FCC Warning** =
++= 15. FCC Warning =
  (((

Changes for page HP0D -- Full Hotspot for Helium User Manual

Summary

Details

Applications

Navigation