Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 14.1
edited by Xiaoling
on 2022/05/06 10:39
Change comment: Uploaded new attachment "1651804782523-623.png", version {1}
To version 73.3
edited by Xiaoling
on 2022/05/07 14:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,76 +1,131 @@
1 1  
2 2  
3 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
4 -
5 5  (% style="text-align:center" %)
6 -[[image:1651802206983-860.png]]
4 +[[image:1651802206983-860.png||height="645" width="602"]]
7 7  
8 8  
9 -
10 -
7 +(((
11 11  **HP0D Full Hotspot for Helium User Manual**
9 +)))
12 12  
13 -[[image:1651802187690-980.png]]
14 14  
15 -Document Version: 1.1
16 16  
17 17  
18 -|**Version**|**Description**|**Date**
19 -|1.0|Release|2022-Apr-8
20 -|1.1|Add trouble shootings|2022-Apr-24
21 -| | |
22 -| | |
23 -| | |
24 -| | |
25 25  
15 +{{toc/}}
26 26  
27 27  
18 +==== 1. Introduction ====
28 28  
20 +===== 1.1 What is HP0D =====
29 29  
22 +(((
23 +(((
24 +(((
25 +The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
26 +)))
27 +)))
28 +)))
30 30  
31 -~1. Introduction
30 +(((
31 +(((
32 +(((
33 +HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
34 +)))
35 +)))
36 +)))
32 32  
33 - 1.1 What is HP0D
38 +(((
39 +(((
40 +(((
41 +HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
42 +)))
43 +)))
44 +)))
34 34  
35 - The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
46 +(((
47 +(((
48 +(((
49 +**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 +)))
51 +)))
52 +)))
36 36  
37 - HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol. HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
54 +(((
55 +(((
56 +(((
57 +HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
58 +)))
59 +)))
60 +)))
38 38  
39 -**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR  Code to onboarding HP0D when it arrives.
40 40  
41 - HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
63 +===== 1.2 Specifications =====
42 42  
65 +(((
66 +(((
67 +**~ Hardware System:**
68 +)))
69 +)))
43 43  
44 -
45 -
46 -1.
47 -11. Specifications
48 -
49 -**Hardware System:**
50 -
71 +(((
72 +(((
51 51   Linux Part:
74 +)))
75 +)))
52 52  
53 -* Raspberry Pi 4
77 +* (((
78 +(((
79 +Raspberry Pi 4
80 +)))
81 +)))
54 54  
83 +(((
84 +(((
85 +**~ Interface:**
86 +)))
87 +)))
55 55  
56 -**Interface:**
89 +* (((
90 +(((
91 +10M/100M RJ45 Ports x 1
92 +)))
93 +)))
94 +* (((
95 +(((
96 +LoRaWAN Wireless
97 +)))
98 +)))
99 +* (((
100 +(((
101 +Power Input: 12V 2A, DC
102 +)))
103 +)))
57 57  
58 -* 10M/100M RJ45 Ports x 1
59 -* LoRaWAN Wireless
60 -* Power Input: 12V 2A, DC
105 +(((
106 +(((
107 +**~ Operating Condition:**
108 +)))
109 +)))
61 61  
111 +* (((
112 +(((
113 +Work Temperature: -20 ~~ 65°C
114 +)))
115 +)))
116 +* (((
117 +(((
118 +Storage Temperature: -20 ~~ 65°C
119 +)))
120 +)))
121 +* (((
122 +(((
123 +Power Input: 12V 2A, DC
124 +)))
125 +)))
62 62  
63 -**Operating Condition:**
127 +===== 1.3 Features =====
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
67 -* Power Input: 12V 2A, DC
68 -
69 -
70 -
71 -
72 -*
73 -*1. Features
74 74  * Open-Source Linux system
75 75  * RPi4 with 2G /4G or 8G RAM
76 76  * Managed by Web GUI, SSH via Internet
... ... @@ -86,330 +86,510 @@
86 86  * Include prepaid $40 onboarding cost and $10 location cost.
87 87  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
88 88  
144 +===== 1.4 Label info and login name =====
89 89  
90 90  
147 +[[image:1651803959860-394.png||height="500" width="375"]]
91 91  
92 -
93 -
94 -1.
95 -11. Label info and login name
96 -
97 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
98 -
99 -
149 +(((
150 +(((
100 100  **Label information:**
152 +)))
153 +)))
101 101  
155 +(((
156 +(((
157 +**Device host name:**      (% class="mark" %)dragino-xxxxxx
158 +)))
159 +)))
102 102  
103 -**Device host name//~://**// dragino-xxxxxx//
161 +(((
162 +(((
163 +**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 +)))
165 +)))
104 104  
105 -**Band**//:                             US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864//
167 +(((
168 +(((
169 +**Miner animal name**: xxx-xxx-xxx
170 +)))
171 +)))
106 106  
107 -**//Miner animal name//**//: xxx-xxx-xxx//
173 +(((
174 +(((
175 +**Miner address**:          112xxxxxx
176 +)))
177 +)))
108 108  
109 -**//Miner address//**//:          112xxxxxx//
179 +(((
180 +(((
181 +**Eth MAC address**: A8: 40: 41: EF: FE: CD
182 +)))
183 +)))
110 110  
111 -**Eth MAC address**//: A8: 40: 41: EF: FE: CD//
185 +(((
186 +(((
187 +**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 +)))
189 +)))
112 112  
113 -**Login**//:                         root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)//
191 +(((
192 +(((
193 +**SN**:  device serial number.
194 +)))
195 +)))
114 114  
115 -**SN**//: device serial number.//
116 116  
198 +==== 2. Quick Start & Onboarding ====
117 117  
200 +(((
201 +(((
202 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 +)))
204 +)))
118 118  
206 +(% class="wikigeneratedid" id="H-2" %)
207 +(((
208 +
209 +)))
119 119  
120 -1. Quick Start & Onboarding
211 +===== 2.1  Connect HP0D Web UI =====
121 121  
122 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
213 +====== 2.1.1 via HP0D’s Access Point. ======
123 123  
215 +(((
216 +(((
217 + At the first boot of HP0D, it will auto generate a Wi-Fi network
124 124  
125 -1.
126 -11. Connect HP0D Web UI
127 -111. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]] via HP0D’s Access Point.
219 +[[image:1651804327535-321.png||height="325" width="199"]]
220 +)))
221 +)))
128 128  
129 -At the first boot of HP0D, it will auto generate a Wi-Fi network
223 +(((
224 +(((
225 +
226 +)))
227 +)))
130 130  
229 +(((
230 +(((
231 +(% class="box infomessage" %)
232 +(((
233 + called           : **//HPD-dragino-xxxxxx//**
234 +)))
235 +)))
236 +)))
131 131  
238 +(((
239 +(((
240 +(% class="box infomessage" %)
241 +(((
242 + with password:  **//dragino+dragino//**
243 +)))
244 +)))
245 +)))
132 132  
247 +(((
248 +(((
249 + You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 +)))
251 +)))
133 133  
253 +[[image:1651804397792-591.png||height="402" width="763"]]
134 134  
135 - called           : **//HPD-dragino-xxxxxx//**
136 136  
137 -with password:  **//dragino+dragino//**
138 138  
257 +====== 2.1.2 Connect via HP0D hostname ======
139 139  
259 +(((
260 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
261 +)))
140 140  
141 -You can use a PC to connect to this Wi-Fi network. The PC will
263 +Like: __**//http:~/~/dragino-4ba54a//**__
142 142  
143 -get an IP address 10.130.1.xxx and the HP0D has the default
265 +[[image:1651804629009-699.png]]
144 144  
145 -IP 10.130.1.1
146 146  
268 +====== 2.1.3 Connect via Ethernet Port ======
147 147  
148 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
270 +(((
271 +(((
272 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
273 +)))
274 +)))
149 149  
276 +(((
277 +(((
278 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
279 +)))
280 +)))
150 150  
282 +(((
283 +
284 +)))
151 151  
286 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
152 152  
153 -1.
154 -11.
155 -111. Connect via HP0D hostname
288 + or SSH access of HP0D.
156 156  
157 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
290 +(% style="text-align:center" %)
291 +[[image:1651804782523-623.png]]
158 158  
159 -PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
160 160  
161 -Web-UI via HP0D’s hostname.
162 162  
295 +===== 2.2 Generate QR Code =====
163 163  
164 -Like: **//http:~/~/dragino-4ba54a//**
297 +(((
298 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
299 +)))
165 165  
166 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
301 +(((
302 + Note: After onboarding, this wallet will become owner of this hotspot.
303 +)))
167 167  
305 +(% style="text-align:center" %)
306 +[[image:image-20220506140312-1.png||height="435" width="438"]]
168 168  
169 -1.
170 -11.
171 -111. Connect via Ethernet Port
172 172  
309 +===== 2.3 Onboarding Hotspot =====
173 173  
174 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
311 +(((
312 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
313 +)))
175 175  
315 +(((
316 + Note: the APP version need to be greater than 3.11.
317 +)))
176 176  
177 -If you get the IP address form route, like~:// **10.130.2.42**,// you can use this IP address to connect the WEB UI or SSH access of HP0D.
319 +(((
320 +
321 +)))
178 178  
179 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
323 +(((
324 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
325 +)))
180 180  
327 +(((
328 + the ‘DRAGINO Miner HP0D’
329 +)))
181 181  
331 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
182 182  
183 -1.
184 -11. Generate QR Code
333 + 3. Scan the QR Code you generated in the previous step.
185 185  
186 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
335 +(% style="text-align:center" %)
336 +[[image:1651828211026-220.png||height="405" width="191"]]
187 187  
188 -Note: After onboarding, this wallet will become owner of this hotspot.
338 + 4. Onboarding your device
189 189  
190 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
340 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
191 191  
342 + mobile to onboarding server might have issue.
192 192  
344 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
193 193  
346 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
194 194  
195 -1.
196 -11. Onboarding Hotspot
197 -1. Download the Helium Hotspot APP from the Apple or Google Play store.
198 198  
199 -Note: the APP version need to be greater than 3.11.
349 +5. Check onboarding status
200 200  
351 + You can check from mobile:
201 201  
202 -1. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.jpg]]
203 -To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
353 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
204 204  
355 + You can also see the hotspot status in below link:
205 205  
206 -1. Scan the QR Code you generated in the previous step.
357 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
207 207  
208 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
359 + Example:
209 209  
361 + Green Synced means hotspot works normal.
210 210  
211 -1. Onboarding your device
363 +(% style="text-align:center" %)
364 +[[image:1651828427715-679.png||height="374" width="635"]]
212 212  
213 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
214 214  
215 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
367 +===== 2.4 Set the Port Forwarding =====
216 216  
369 +(((
370 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
371 +)))
217 217  
218 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.jpg]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
373 +(((
374 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
375 +)))
219 219  
377 +(((
378 + you may have.
379 +)))
220 220  
381 +(% style="text-align:center" %)
382 +[[image:1651828514449-658.png]]
221 221  
384 +(((
385 +
386 +)))
222 222  
223 -1. Check onboarding status
388 +(((
389 + Note: Please refer to more detailed Settings
390 +)))
224 224  
225 -You can check from mobile:
392 +(((
393 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
394 +)))
226 226  
227 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
396 +(((
397 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
398 +)))
228 228  
229 -You can also see the hotspot status in below link:
230 230  
231 -https:~/~/explorer.helium.com/hotspots/**//<YOUR_HOTSPORT_KEY>//**
401 +==== 3. Check the configuration of HP0D ====
232 232  
233 -Example:
403 +===== 3.1 LoRa frequency configuration =====
234 234  
235 -Green Synced means hotspot works normal.
405 +(% style="text-align:center" %)
406 +[[image:1651828687205-178.png||height="323" width="657"]]
236 236  
237 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
238 238  
239 239  
410 +===== 3.2 Check the LoRaWAN serveraddress =====
240 240  
241 241  
413 +(% style="text-align:center" %)
414 +[[image:1651828703680-156.png||height="349" width="672"]]
242 242  
243 -1.
244 -11. Set the Port Forwarding
245 245  
417 +===== 3.3 Check Miner configuration =====
246 246  
247 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
419 +(% style="text-align:center" %)
420 +[[image:image-20220506181408-1.png||height="451" width="513"]]
248 248  
249 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
422 +**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
250 250  
424 +**~ button of Update, and then wait 10mins to check here,**
251 251  
252 -Note: Please refer to more detailed Settings
253 253  
254 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
427 +==== 4. Installation of Antenna ====
255 255  
256 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
429 +(((
430 + HP0D use Fiber Glass Antenna.
431 +)))
257 257  
433 +(% style="text-align:center" %)
434 +[[image:1651832158606-882.png]]
258 258  
436 +(((
437 +
438 +)))
259 259  
440 +(((
441 +
442 +)))
260 260  
444 +(((
445 + User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
446 +)))
261 261  
262 -1. Check the configuration of HP0D
263 -11. LoRa frequency configuration
448 +(((
449 + to antenna and install as below:
450 +)))
264 264  
452 +(((
453 +(% style="text-align:center" %)
454 +[[image:1651832205608-998.png||height="349" width="198"]]
455 +)))
265 265  
266 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
457 +==== 5. SSH Access for Linux console ====
267 267  
268 -1.
269 -11. Check the LoRaWAN serveraddress.
459 +(((
460 + IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
461 +)))
270 270  
271 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
463 +(((
464 + Port:         22
465 +)))
272 272  
467 +(((
468 + User Name:      **root**
469 +)))
273 273  
471 +(((
472 + Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
473 +)))
274 274  
475 +(((
476 +
477 +)))
275 275  
479 +(((
480 + After logging in, you will be in the Linux console and can enter commands as shown below.
481 +)))
276 276  
483 +(% style="text-align:center" %)
484 +[[image:1651832284160-991.png]]
277 277  
278 278  
487 +==== **6. How to change the Wireless function of HP0D** ====
279 279  
489 + // The wireless function is configured as AP by default and the web page does not support configuration, //
280 280  
281 -1.
282 -11. Check Miner configuration
491 +// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
283 283  
284 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
493 +===== **6.1 Access the Linux console.** =====
285 285  
286 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
495 + Follow the previous step of Step 5.
287 287  
288 288  
498 +===== 6.2 Install the package of network-manager. =====
289 289  
500 + Run commands:
290 290  
502 +(% class="box infomessage" %)
503 +(((
504 + apt update
505 + apt install network-manager
506 +)))
291 291  
292 -1. Installation of Antenna
508 +[[image:image-20220507140730-1.png]]
293 293  
294 -HP0D use Fiber Glass Antenna.
295 295  
296 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
297 297  
298 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
512 +===== 6.3 Reboot the device. =====
299 299  
514 + Run command:
300 300  
301 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
516 +(% class="box infomessage" %)
517 +(((
518 + reboot
519 +)))
302 302  
521 +[[image:image-20220507140814-2.png]]
303 303  
523 +===== 6.4 Check the wireless type =====
304 304  
525 + Run command:
305 305  
527 +(% class="box infomessage" %)
528 +(((
529 + iw dev
530 +)))
306 306  
307 -1. SSH Access for Linux console
532 +[[image:image-20220507140941-3.png]]
308 308  
309 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
534 +===== 6.5 Connect the WiFi. =====
310 310  
311 -Port:         22
536 + Run command:
312 312  
313 -User Name:      **root**
538 +(% class="box infomessage" %)
539 +(((
540 + nmtui
541 +)))
314 314  
315 -Password:         **Randomly generated （found on device’s label ）**
543 +[[image:image-20220507140953-4.png]]
316 316  
317 317  
318 -After logging in, you will be in the Linux console and can enter commands as shown below.
319 319  
320 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
547 +==== 7. Trouble Shootings ====
321 321  
549 +===== 7.1 How to get a wallet address? =====
322 322  
551 +// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
323 323  
324 324  
325 -1. Trouble Shootings
326 -11. How to get a wallet address?
554 +===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
327 327  
328 -//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
556 +(((
557 + User can login the HP0D, able to access other Web Pages except miner page
558 +)))
329 329  
560 +(((
561 + If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
562 +)))
330 330  
331 -1.
332 -11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
333 333  
565 +===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
334 334  
335 -//User can login the HP0D, able to access other Web Pages except miner page//
567 +(% style="text-align:center" %)
568 +[[image:image-20220506182042-2.png||height="250" width="516"]]
336 336  
570 +(% style="text-align:center" %)
571 +[[image:1651832455372-647.png||height="224" width="520"]]
337 337  
338 -//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
339 339  
574 + HP0D is establish connection to Helium server and not finished. And you might see above.
340 340  
341 -1.
342 -11. Onboarding ~-~- Some parameters in miner page show timeout
576 + It might relate to the network where might up to 10mins
343 343  
344 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
345 345  
346 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
579 +===== 7.4 Onboarding – Bad Gaterway =====
347 347  
348 -//HP0D is establish connection to Helium server and not finished. And you might see above.//
581 +(% style="text-align:center" %)
582 +[[image:1651832583790-633.png]]
349 349  
350 -//It might relate to the network where might up to 10mins//
584 + This is caused by the process leads too long which just need to refresh the page.
351 351  
352 352  
353 -1.
354 -11. Onboarding – Bad Gaterway
587 +7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
355 355  
356 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
589 +(% style="text-align:center" %)
590 +[[image:image-20220506182424-3.png]]
357 357  
358 -//This is caused by the process leads too long which just need to refresh the page.//
592 + This may be related to the current block height, if the device is synchronizing to the latest height or if the
359 359  
594 + device block height is much lower than the current height as the above picture like '1 1', the QR code
360 360  
361 -1.
362 -11. Onboarding ~-~- Why did QR Code generate is aways fail?
596 + generation may fail.
363 363  
364 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
365 365  
366 -This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
599 +===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
367 367  
601 +(% style="text-align:center" %)
602 +[[image:1651832742262-209.png||height="297" width="365"]]
368 368  
369 -1.
370 -11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
604 + Please ensure that you enter the correct wallet address and that your network is up and running, the user can
371 371  
372 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
606 + click the button of ‘Clean’ to re-generate the QR Code.
373 373  
374 -Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
375 375  
609 +===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
376 376  
377 -1.
378 -11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
611 +(% style="text-align:center" %)
612 +[[image:1651832811038-780.png||height="462" width="216"]]
379 379  
380 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
614 + If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
381 381  
382 -If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
616 + please contact us to help you solve.
383 383  
384 384  
385 -1.
386 -11. Onboarding – MAC address is being refreshed after scan QR Code
619 +===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
387 387  
388 -//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
621 +// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
389 389  
623 + public key/ wallet address to onboarding server. Server will return the match MAC address
390 390  
391 -//If you don’t see MAC address, make sure your mobile has good internet connection.//
625 + for this hotspot.
392 392  
393 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
394 394  
628 + If you don’t see MAC address, make sure your mobile has good internet connection.
395 395  
630 +(% style="text-align:center" %)
631 +[[image:1651832880009-473.png]]
396 396  
397 397  
398 -1.
399 -11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
634 +===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
400 400  
401 -//This is caused by the server connection delay, which does not affect the normal use.//
636 + This is caused by the server connection delay, which does not affect the normal use.
402 402  
403 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
404 404  
639 +(% style="text-align:center" %)
640 +[[image:1651832959907-357.png]]
405 405  
406 -*
407 -*1. Mobile APP crash after scan the QR Code?
408 -* //Make sure you have input the correct Wallet address to generate QR Code.//
409 -* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
410 -* //Make sure your mobile app’s relevant permission are enabled.//
411 -* //Known: The Android 11 version may cause this kind of issue.//
642 +===== 7.10 Mobile APP crash after scan the QR Code? =====
412 412  
644 +* Make sure you have input the correct Wallet address to generate QR Code.
645 +* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
646 +* Make sure your mobile app’s relevant permission are enabled.
647 +* Known: The Android 11 version may cause this kind of issue.
413 413  
414 414  1.
415 415  11. Why the frequency/region is not the same what I purchased?
... ... @@ -438,7 +438,6 @@
438 438  
439 439  1. Supports
440 440  
441 -
442 442  //If you are experiencing issues and can’t solve, you can send mail to//
443 443  
444 444  [[//support@dragino.com//>>mailto:support@dragino.com]]
... ... @@ -450,7 +450,6 @@
450 450  
451 451  1. Order Info
452 452  
453 -
454 454  **HP0D-XXX**
455 455  
456 456  **XXX**: Frequency Band
... ... @@ -458,8 +458,6 @@
458 458  * 868: For Bands: EU868,IN865
459 459  * 915: For Bands: US915,AU915,AS923,KR920
460 460  
461 -
462 -
463 463  1. Manufacturer Info
464 464  
465 465  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -486,5 +486,3 @@
486 486  
487 487  
488 488  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
489 -
490 -
1651816940275-371.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.8 KB
Content
1651817186037-899.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.2 KB
Content
1651817194458-938.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.0 KB
Content
1651817207344-111.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.4 KB
Content
1651817529289-461.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
1651828211026-220.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.4 KB
Content
1651828250802-391.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
1651828262668-768.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
1651828391664-884.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +49.4 KB
Content
1651828401011-970.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.0 KB
Content
1651828427715-679.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +538.6 KB
Content
1651828514449-658.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.1 KB
Content
1651828687205-178.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.6 KB
Content
1651828703680-156.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +113.7 KB
Content
1651829241318-427.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.3 KB
Content
1651829292719-315.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.7 KB
Content
1651829385186-114.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.3 KB
Content
1651829783380-920.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +80.5 KB
Content
1651829907019-256.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
1651830026619-866.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.8 KB
Content
image-20220506140312-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +89.3 KB
Content
image-20220506141159-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.5 KB
Content
image-20220506172609-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.1 KB
Content
image-20220506173610-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20220506173921-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.2 KB
Content