Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 127.1
edited by Xiaoye
on 2022/06/09 15:07
Change comment: There is no comment for this version
To version 73.3
edited by Xiaoling
on 2022/05/07 14:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D Full Hotspot for Helium
1 +HP0D
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,58 +1,130 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1651802206983-860.png||height="427" width="398"]]
4 +[[image:1651802206983-860.png||height="645" width="602"]]
3 3  
4 4  
5 5  (((
6 6  **HP0D Full Hotspot for Helium User Manual**
7 -
8 -
9 9  )))
10 10  
11 -**Table of Contents：**
12 12  
12 +
13 +
14 +
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
18 +==== 1. Introduction ====
17 17  
18 -== **1.1 What is HP0D** ==
20 +===== 1.1 What is HP0D =====
19 19  
20 20  (((
23 +(((
24 +(((
21 21  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
22 22  )))
27 +)))
28 +)))
23 23  
24 24  (((
25 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
31 +(((
32 +(((
33 +HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
26 26  )))
35 +)))
36 +)))
27 27  
28 28  (((
29 -(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
39 +(((
40 +(((
41 +HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
30 30  )))
43 +)))
44 +)))
31 31  
32 32  (((
47 +(((
48 +(((
49 +**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 +)))
51 +)))
52 +)))
53 +
54 +(((
55 +(((
56 +(((
33 33  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
34 34  )))
59 +)))
60 +)))
35 35  
36 -== **1.2 Specifications** ==
37 37  
63 +===== 1.2 Specifications =====
64 +
65 +(((
66 +(((
38 38  **~ Hardware System:**
68 +)))
69 +)))
70 +
71 +(((
72 +(((
39 39   Linux Part:
74 +)))
75 +)))
40 40  
41 -* Raspberry Pi 4
77 +* (((
78 +(((
79 +Raspberry Pi 4
80 +)))
81 +)))
42 42  
83 +(((
84 +(((
43 43  **~ Interface:**
86 +)))
87 +)))
44 44  
45 -* 10M/100M RJ45 Ports x 1
46 -* LoRaWAN Wireless
47 -* Power Input: 12V 2A, DC
89 +* (((
90 +(((
91 +10M/100M RJ45 Ports x 1
92 +)))
93 +)))
94 +* (((
95 +(((
96 +LoRaWAN Wireless
97 +)))
98 +)))
99 +* (((
100 +(((
101 +Power Input: 12V 2A, DC
102 +)))
103 +)))
48 48  
105 +(((
106 +(((
49 49  **~ Operating Condition:**
108 +)))
109 +)))
50 50  
51 -* Work Temperature: -20 ~~ 65°C
52 -* Storage Temperature: -20 ~~ 65°C
53 -* Power Input: 12V 2A, DC
111 +* (((
112 +(((
113 +Work Temperature: -20 ~~ 65°C
114 +)))
115 +)))
116 +* (((
117 +(((
118 +Storage Temperature: -20 ~~ 65°C
119 +)))
120 +)))
121 +* (((
122 +(((
123 +Power Input: 12V 2A, DC
124 +)))
125 +)))
54 54  
55 -== **1.3 Features** ==
127 +===== 1.3 Features =====
56 56  
57 57  * Open-Source Linux system
58 58  * RPi4 with 2G /4G or 8G RAM
... ... @@ -69,686 +69,579 @@
69 69  * Include prepaid $40 onboarding cost and $10 location cost.
70 70  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
71 71  
72 -== **1.4 Label info and login name** ==
144 +===== 1.4 Label info and login name =====
73 73  
146 +
74 74  [[image:1651803959860-394.png||height="500" width="375"]]
75 75  
76 -
77 -
78 -=== 1.4.1 Label information: ===
79 -
80 -**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 -**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 -**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 -**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 -**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 -**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 -**SN**:  (% class="mark" %)device serial number.
87 -
88 -
89 -= **2. Quick Start & Onboarding** =
90 -
91 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
92 -
93 -
94 -== **2.1  Connect HP0D Web UI** ==
95 -
96 -=== **2.1.1 via HP0D’s Access Point** ===
97 -
98 -At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 -
100 -
101 -[[image:1651804327535-321.png||height="325" width="199"]]
102 -
103 -
104 -(% class="box infomessage" %)
105 105  (((
106 - called  : **//HPD-dragino-xxxxxx//**
150 +(((
151 +**Label information:**
107 107  )))
153 +)))
108 108  
109 -(% class="box infomessage" %)
110 110  (((
111 - with password:  **//dragino+dragino//**
112 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
156 +(((
157 +**Device host name:**      (% class="mark" %)dragino-xxxxxx
113 113  )))
159 +)))
114 114  
115 -
116 -[[image:1651804397792-591.png||height="386" width="733"]]
117 -
118 -
119 -=== **2.1.2 Connect via HP0D hostname** ===
120 -
121 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 -
123 - Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
124 -
125 -
126 -[[image:1651804629009-699.png]]
127 -
128 -=== **2.1.3 Connect via Ethernet Port** ===
129 -
130 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 -
132 -
133 -//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 -
135 -
136 -[[image:1651804782523-623.png]]
137 -
138 -
139 -== **2.2 Generate QR Code** ==
140 -
141 -
142 142  (((
143 -//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
162 +(((
163 +**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
144 144  )))
165 +)))
145 145  
146 146  (((
147 -//Note: After onboarding, this wallet will become the owner of this hotspot.//
148 -
149 -
168 +(((
169 +**Miner animal name**: xxx-xxx-xxx
150 150  )))
171 +)))
151 151  
152 -[[image:image-20220506140312-1.png||height="435" width="438"]]
153 -
154 -
155 -== **2.3 Onboarding Hotspot** ==
156 -
157 -
158 158  (((
159 -//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
174 +(((
175 +**Miner address**:          112xxxxxx
160 160  )))
177 +)))
161 161  
162 162  (((
163 -**//Note: the APP version needs to be greater than 3.11.//**
164 -
165 -
180 +(((
181 +**Eth MAC address**: A8: 40: 41: EF: FE: CD
166 166  )))
183 +)))
167 167  
168 168  (((
169 -//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
186 +(((
187 +**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 +)))
189 +)))
170 170  
171 -
191 +(((
192 +(((
193 +**SN**:  device serial number.
172 172  )))
195 +)))
173 173  
174 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
175 175  
198 +==== 2. Quick Start & Onboarding ====
176 176  
177 -//**3. **Scan the QR Code you generated in the previous step.//
178 -
179 -[[image:1651828211026-220.png||height="405" width="191"]]
180 -
181 -
182 182  (((
183 -//**4. **Onboarding your device//
201 +(((
202 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
184 184  )))
204 +)))
185 185  
206 +(% class="wikigeneratedid" id="H-2" %)
186 186  (((
187 -Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
188 -
189 189  
190 190  )))
191 191  
192 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
211 +===== 2.1  Connect HP0D Web UI =====
193 193  
194 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
213 +====== 2.1.1 via HP0D’s Access Point. ======
195 195  
196 -
197 -**5. **//Check onboarding status where you can check from mobile~://
198 -
199 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
200 -
201 -
202 -//You can also see the hotspot status in the below link~://
203 -
204 -//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
205 -
206 -//Example~://
207 -
208 -
209 -**//Green Synced means hotspot works normally.//**
210 -
211 -[[image:1651828427715-679.png||height="374" width="635"]]
212 -
213 -
214 -== **2.4 Set the Port Forwarding** ==
215 -
216 -
217 217  (((
218 -//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
216 +(((
217 + At the first boot of HP0D, it will auto generate a Wi-Fi network
218 +
219 +[[image:1651804327535-321.png||height="325" width="199"]]
219 219  )))
221 +)))
220 220  
221 -[[image:1651828514449-658.png]]
222 -
223 223  (((
224 +(((
224 224  
225 225  )))
227 +)))
226 226  
227 227  (((
228 -Note: Please refer to more detailed Settings
230 +(((
231 +(% class="box infomessage" %)
232 +(((
233 + called           : **//HPD-dragino-xxxxxx//**
229 229  )))
235 +)))
236 +)))
230 230  
231 231  (((
232 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
239 +(((
240 +(% class="box infomessage" %)
241 +(((
242 + with password:  **//dragino+dragino//**
233 233  )))
244 +)))
245 +)))
234 234  
235 235  (((
236 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 -
238 -
248 +(((
249 + You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
239 239  )))
251 +)))
240 240  
241 -= **3. Check the configuration of HP0D** =
253 +[[image:1651804397792-591.png||height="402" width="763"]]
242 242  
243 -== **3.1 LoRa frequency configuration** ==
244 244  
245 245  
246 -[[image:1651828687205-178.png||height="323" width="657"]]
257 +====== 2.1.2 Connect via HP0D hostname ======
247 247  
248 -
249 -== **3.2 Check the LoRaWAN Server Address** ==
250 -
251 -
252 -[[image:image-20220607160428-1.png||height="472" width="654"]]
253 -
254 -
255 -== **3.2.1 Configure the Secondary LoRaWAN Server** ==
256 -
257 -[[image:image-20220607161130-2.png||height="501" width="1112"]]
258 -
259 -[[image:image-20220607161603-3.png||height="557" width="1113"]]
260 -
261 -[[image:image-20220607161812-4.png||height="699" width="1115"]]
262 -
263 -
264 -[[image:image-20220607162635-5.png||height="339" width="1110"]]
265 -
266 -[[image:image-20220607162859-6.png]]
267 -
268 -== **3.3 Check Miner configuration** ==
269 -
270 -
271 -[[image:image-20220506181408-1.png||height="451" width="513"]]
272 -
273 273  (((
274 -//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 -
276 -
277 -== **//3.4 Check the Miner state//** ==
278 -
279 -
280 -[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 -
282 -
283 -//**Note: Absorption status can show whether the hotspot is working properly**//
284 -
285 -//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 -
287 - //usually, the nat_type should be '**none'**//
288 -
289 -
260 +Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
290 290  )))
291 291  
292 -= **4. Installation of Antenna** =
263 +Like: __**//http:~/~/dragino-4ba54a//**__
293 293  
265 +[[image:1651804629009-699.png]]
294 294  
295 -(((
296 -//HP0D uses Fiber Glass Antenna.//
297 -)))
298 298  
299 -[[image:1651832158606-882.png]]
268 +====== 2.1.3 Connect via Ethernet Port ======
300 300  
301 301  (((
302 -
271 +(((
272 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
303 303  )))
274 +)))
304 304  
305 305  (((
306 -//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
277 +(((
278 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
307 307  )))
280 +)))
308 308  
309 309  (((
310 -[[image:1651832205608-998.png||height="349" width="198"]]
311 -
312 312  
313 313  )))
314 314  
315 -= **5. SSH Access for Linux console** =
286 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
316 316  
288 + or SSH access of HP0D.
317 317  
318 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
290 +(% style="text-align:center" %)
291 +[[image:1651804782523-623.png]]
319 319  
320 -//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
321 321  
322 -//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
323 323  
324 -//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
295 +===== 2.2 Generate QR Code =====
325 325  
326 -
327 -Below are screenshots:
328 -
329 -[[image:image-20220608202027-1.png]]
330 -
331 331  (((
332 -**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
298 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
333 333  )))
334 334  
335 335  (((
336 -//Port:  22//
302 + Note: After onboarding, this wallet will become owner of this hotspot.
337 337  )))
338 338  
305 +(% style="text-align:center" %)
306 +[[image:image-20220506140312-1.png||height="435" width="438"]]
307 +
308 +
309 +===== 2.3 Onboarding Hotspot =====
310 +
339 339  (((
340 -//User Name:      (% style="color:green" %)**root**//
312 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
341 341  )))
342 342  
343 343  (((
344 -//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
316 + Note: the APP version need to be greater than 3.11.
317 +)))
345 345  
319 +(((
346 346  
347 347  )))
348 348  
349 349  (((
350 -//After logging in, you will be in the Linux console and can enter commands as shown below.//
324 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
325 +)))
351 351  
352 -
327 +(((
328 + the ‘DRAGINO Miner HP0D’
353 353  )))
354 354  
355 -[[image:image-20220608202118-2.png]]
331 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
356 356  
333 + 3. Scan the QR Code you generated in the previous step.
357 357  
358 -= **6. How to change the Wireless function of HP0D** =
335 +(% style="text-align:center" %)
336 +[[image:1651828211026-220.png||height="405" width="191"]]
359 359  
360 -//The wireless function is configured as AP by default and the web page does not support configuration,//
338 + 4. Onboarding your device
361 361  
362 -//if you want to configure it as STA(client)connection mode,//
340 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
363 363  
364 -//you can configure your WiFi info on the** /Network/WiFi **page.//
342 + mobile to onboarding server might have issue.
365 365  
344 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
366 366  
367 -**//Note: the wireless state is as AP//**
346 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
368 368  
369 -[[image:image-20220531170243-5.png||height="469" width="967"]]
370 370  
349 +5. Check onboarding status
371 371  
372 -== **6.1 Access WiFi configuration page** ==
351 + You can check from mobile:
373 373  
353 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
374 374  
375 -[[image:image-20220531165803-2.png]]
355 + You can also see the hotspot status in below link:
376 376  
357 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
377 377  
378 -== **6.2 Enter your WiFi information and save** ==
359 + Example:
379 379  
361 + Green Synced means hotspot works normal.
380 380  
381 -[[image:image-20220531165958-3.png]]
363 +(% style="text-align:center" %)
364 +[[image:1651828427715-679.png||height="374" width="635"]]
382 382  
383 383  
384 -== **6.3 Change the WiFi mode.** ==
367 +===== 2.4 Set the Port Forwarding =====
385 385  
369 +(((
370 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
371 +)))
386 386  
387 -[[image:image-20220531170131-4.png]]
373 +(((
374 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
375 +)))
388 388  
389 -== **6.4 Wait system to restart** ==
377 +(((
378 + you may have.
379 +)))
390 390  
381 +(% style="text-align:center" %)
382 +[[image:1651828514449-658.png]]
391 391  
392 -[[image:image-20220531170501-7.png]]
384 +(((
385 +
386 +)))
393 393  
394 -
395 -//**Note: When the time remaining is finished it will turn to the home page.**//
396 -
397 -
398 -== **6.5 Check the STA state** ==
399 -
400 -
401 -[[image:image-20220531170705-8.png||height="484" width="990"]]
402 -
403 -
404 -= **7. Trouble Shootings** =
405 -
406 -== **7.1 How to get a wallet address?** ==
407 -
408 -
409 -**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 -
411 -
412 -== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 -
414 -
415 415  (((
416 -//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
389 + Note: Please refer to more detailed Settings
417 417  )))
418 418  
419 419  (((
420 -//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
393 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
394 +)))
421 421  
422 -
396 +(((
397 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
423 423  )))
424 424  
425 -== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
426 426  
401 +==== 3. Check the configuration of HP0D ====
427 427  
428 -[[image:image-20220506182042-2.png||height="250" width="516"]]
403 +===== 3.1 LoRa frequency configuration =====
429 429  
430 -[[image:1651832455372-647.png||height="224" width="520"]]
405 +(% style="text-align:center" %)
406 +[[image:1651828687205-178.png||height="323" width="657"]]
431 431  
432 432  
433 -**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
434 434  
435 -**//It might relate to the network which might be up to 10mins.//**
410 +===== 3.2 Check the LoRaWAN serveraddress =====
436 436  
437 437  
438 -== **7.4 Onboarding – Bad Gateway** ==
413 +(% style="text-align:center" %)
414 +[[image:1651828703680-156.png||height="349" width="672"]]
439 439  
440 440  
441 -[[image:1651832583790-633.png]]
417 +===== 3.3 Check Miner configuration =====
442 442  
419 +(% style="text-align:center" %)
420 +[[image:image-20220506181408-1.png||height="451" width="513"]]
443 443  
444 -//**This is caused by the process leading too long which just needs to refresh the page.**//
422 +**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
445 445  
424 +**~ button of Update, and then wait 10mins to check here,**
446 446  
447 -== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
448 448  
427 +==== 4. Installation of Antenna ====
449 449  
450 -[[image:image-20220506182424-3.png]]
429 +(((
430 + HP0D use Fiber Glass Antenna.
431 +)))
451 451  
433 +(% style="text-align:center" %)
434 +[[image:1651832158606-882.png]]
452 452  
453 453  (((
454 -//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 -
456 456  
457 457  )))
458 458  
459 -== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
460 -
461 -[[image:1651832742262-209.png||height="297" width="365"]]
462 -
463 -
464 464  (((
465 -//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 -
467 467  
468 468  )))
469 469  
470 -== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
444 +(((
445 + User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
446 +)))
471 471  
448 +(((
449 + to antenna and install as below:
450 +)))
472 472  
473 -[[image:1651832811038-780.png||height="462" width="216"]]
452 +(((
453 +(% style="text-align:center" %)
454 +[[image:1651832205608-998.png||height="349" width="198"]]
455 +)))
474 474  
457 +==== 5. SSH Access for Linux console ====
475 475  
476 476  (((
477 -//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
460 + IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
461 +)))
478 478  
479 -
463 +(((
464 + Port:         22
480 480  )))
481 481  
482 -== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
467 +(((
468 + User Name:      **root**
469 +)))
483 483  
484 -
485 485  (((
486 -//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
472 + Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
473 +)))
487 487  
475 +(((
488 488  
489 489  )))
490 490  
491 491  (((
492 -//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
480 + After logging in, you will be in the Linux console and can enter commands as shown below.
493 493  )))
494 494  
495 -[[image:1651832880009-473.png]]
483 +(% style="text-align:center" %)
484 +[[image:1651832284160-991.png]]
496 496  
497 497  
498 -== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
487 +==== **6. How to change the Wireless function of HP0D** ====
499 499  
489 + // The wireless function is configured as AP by default and the web page does not support configuration, //
500 500  
501 -**//This is caused by the server connection delay, which does not affect the regular use.//**
491 +// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
502 502  
503 -[[image:1651832959907-357.png]]
493 +===== **6.1 Access the Linux console.** =====
504 504  
495 + Follow the previous step of Step 5.
505 505  
506 -== **7.10 Mobile APP crash after scanning the QR Code?** ==
507 507  
498 +===== 6.2 Install the package of network-manager. =====
508 508  
509 -* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 -* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 -* //**Make sure your mobile app’s relevant permission is enabled.**//
512 -* //**Known: The Android 11 version may cause this kind of issue.**//
500 + Run commands:
513 513  
514 -== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 -
516 -
502 +(% class="box infomessage" %)
517 517  (((
518 -//**Each HP0D is inspected and configured prior to shipping.**//
504 + apt update
505 + apt install network-manager
519 519  )))
520 520  
521 -(((
522 -//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
508 +[[image:image-20220507140730-1.png]]
523 523  
524 -
525 -)))
526 526  
527 -== **7.12 Can use the frequency to a region where is no support?** ==
528 528  
512 +===== 6.3 Reboot the device. =====
529 529  
530 -(((
531 -//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 -)))
514 + Run command:
533 533  
516 +(% class="box infomessage" %)
534 534  (((
535 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
536 -
537 -
518 + reboot
538 538  )))
539 539  
540 -== **7.13 Can change the frequency of the HP0D Miner?** ==
521 +[[image:image-20220507140814-2.png]]
541 541  
523 +===== 6.4 Check the wireless type =====
542 542  
543 -//We do not recommend doing this, it may damage your device//
525 + Run command:
544 544  
527 +(% class="box infomessage" %)
528 +(((
529 + iw dev
530 +)))
545 545  
546 -== **7.14 Low Reward and not transmit issue** ==
532 +[[image:image-20220507140941-3.png]]
547 547  
534 +===== 6.5 Connect the WiFi. =====
548 548  
549 -//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
536 + Run command:
550 550  
551 -//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
538 +(% class="box infomessage" %)
539 +(((
540 + nmtui
541 +)))
552 552  
553 -[[image:image-20220527114519-1.png||height="579" width="851"]]
543 +[[image:image-20220507140953-4.png]]
554 554  
555 555  
556 -== **7.15 Why is my miner version not the latest** ==
557 557  
547 +==== 7. Trouble Shootings ====
558 558  
559 -//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
549 +===== 7.1 How to get a wallet address? =====
560 560  
561 -//However, the download and upgrade may fail due to the network.//
551 +// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
562 562  
563 -//So **We offer a manual check method:**//
564 564  
565 - **// Use the "draginoups" command to check//**
554 +===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
566 566  
567 -[[image:image-20220601101358-1.png]]
556 +(((
557 + User can login the HP0D, able to access other Web Pages except miner page
558 +)))
568 568  
560 +(((
561 + If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
562 +)))
569 569  
570 570  
571 -= **8. How to reset the hotspot OS to the factory settings** =
565 +===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
572 572  
573 -The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
567 +(% style="text-align:center" %)
568 +[[image:image-20220506182042-2.png||height="250" width="516"]]
574 574  
575 -So you have to re-flash the image into the SD card.
570 +(% style="text-align:center" %)
571 +[[image:1651832455372-647.png||height="224" width="520"]]
576 576  
577 577  
578 -//**Preparations:**//
574 + HP0D is establish connection to Helium server and not finished. And you might see above.
579 579  
580 -1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
576 + It might relate to the network where might up to 10mins
581 581  
582 -2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
583 583  
584 -3. //A card reader device//
579 +===== 7.4 Onboarding – Bad Gaterway =====
585 585  
586 -4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
581 +(% style="text-align:center" %)
582 +[[image:1651832583790-633.png]]
587 587  
588 -5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
584 + This is caused by the process leads too long which just need to refresh the page.
589 589  
590 -=== ===
591 591  
592 -=== **Step 1.  Formatting the SD Card** ===
587 +7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
593 593  
589 +(% style="text-align:center" %)
590 +[[image:image-20220506182424-3.png]]
594 594  
595 -[[image:image-20220609111027-9.png]]
592 + This may be related to the current block height, if the device is synchronizing to the latest height or if the
596 596  
594 + device block height is much lower than the current height as the above picture like '1 1', the QR code
597 597  
598 -=== **Step 2. Select the OS image ** ===
596 + generation may fail.
599 599  
600 600  
601 -[[image:image-20220609104907-8.png]]
599 +===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
602 602  
601 +(% style="text-align:center" %)
602 +[[image:1651832742262-209.png||height="297" width="365"]]
603 603  
604 -=== **Step 3. Select the target ** ===
604 + Please ensure that you enter the correct wallet address and that your network is up and running, the user can
605 605  
606 + click the button of ‘Clean’ to re-generate the QR Code.
606 606  
607 -[[image:image-20220609104637-2.png]]
608 608  
609 -[[image:image-20220609104701-3.png]]
609 +===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
610 610  
611 +(% style="text-align:center" %)
612 +[[image:1651832811038-780.png||height="462" width="216"]]
611 611  
612 -=== **Step 4. Flash start** ===
614 + If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
613 613  
616 + please contact us to help you solve.
614 614  
615 -[[image:image-20220609104727-4.png]]
616 616  
617 -[[image:image-20220609104741-5.png]]
619 +===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
618 618  
621 +// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
619 619  
620 -=== **Flash Complete** ===
623 + public key/ wallet address to onboarding server. Server will return the match MAC address
621 621  
625 + for this hotspot.
622 622  
623 -[[image:image-20220609104415-1.png]]
624 624  
628 + If you don’t see MAC address, make sure your mobile has good internet connection.
625 625  
626 -== **Step 4. Re-install the SD card into the hotspot and boot it** ==
630 +(% style="text-align:center" %)
631 +[[image:1651832880009-473.png]]
627 627  
628 628  
629 -== **Step 5. Configure the correct region for the miner** ==
634 +===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
630 630  
631 -**by the default, the factory settings apply to the US915.**
636 + This is caused by the server connection delay, which does not affect the normal use.
632 632  
633 -**if your region is not the US915, you have to configure the correct region for the miner.**
634 634  
639 +(% style="text-align:center" %)
640 +[[image:1651832959907-357.png]]
635 635  
636 -**Access the hotspot CLI, and run these Linux commands**
642 +===== 7.10 Mobile APP crash after scan the QR Code? =====
637 637  
644 +* Make sure you have input the correct Wallet address to generate QR Code.
645 +* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
646 +* Make sure your mobile app’s relevant permission are enabled.
647 +* Known: The Android 11 version may cause this kind of issue.
638 638  
639 -~#~##update the software of dragino
649 +1.
650 +11. Why the frequency/region is not the same what I purchased?
640 640  
641 -apt update
652 +//Each HP0D is inspected and configured prior to shipping.//
642 642  
643 -apt install dragino*
654 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
644 644  
645 -[[image:image-20220609150452-2.png||height="348" width="909"]]
646 646  
657 +1.
658 +11. Can use the frequency to a region where is not support?
647 647  
660 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
648 648  
649 -~#~##configure the correct region for the miner and update it
662 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
650 650  
651 -uci set miner.general.region=<Region; Such as AS923-1/AU915/US915/EU868/IN865>
652 652  
653 -uci commit miner
665 +1.
666 +11. Can change the frequency of the HP0D Miner?
654 654  
655 -minerup update
668 +//We do not recommend doing this, it may damage your device//
656 656  
657 657  
658 658  
659 -~#~##check the miner version
660 660  
661 -draginoups
662 662  
674 +1. Supports
663 663  
664 -= **9. OTA Version Info** =
676 +//If you are experiencing issues and can’t solve, you can send mail to//
665 665  
666 -== **When does the OTA update happen?** ==
678 +[[//support@dragino.com//>>mailto:support@dragino.com]]
667 667  
680 +//With your question as detail as possible. We will reply and help you in the shortest.//
668 668  
669 -**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
670 670  
671 -== **# 2022/05/14** ==
672 672  
673 673  
674 -1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
675 -1. //Add postinst after auto-update//
676 -1. //Add Miner version mark.//
677 -1. //Add fast sync if miner GAP is large//
685 +1. Order Info
678 678  
679 -== **# 2022/05/24** ==
687 +**HP0D-XXX**
680 680  
681 - 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
689 +**XXX**: Frequency Band
682 682  
691 +* 868: For Bands: EU868,IN865
692 +* 915: For Bands: US915,AU915,AS923,KR920
683 683  
684 -= **10. Supports** =
694 +1. Manufacturer Info
685 685  
686 -(((
687 -**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
688 -)))
689 -
690 -(((
691 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
692 -
693 -
694 -)))
695 -
696 -= **11. Order Info** =
697 -
698 -(% style="color:#0000ff" %)**HP0D-XXX**
699 -
700 -(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
701 -
702 -* **AS923**: LoRaWAN AS923 band
703 -* **AU915**: LoRaWAN AU915 band
704 -* **EU868**: LoRaWAN EU868 band
705 -* **KR920**: LoRaWAN KR920 band
706 -* **US915**: LoRaWAN US915 band
707 -* **IN865**: LoRaWAN IN865 band
708 -
709 -= **12. Manufacturer Info** =
710 -
711 -(((
712 712  **Shenzhen Dragino Technology Development co. LTD**
713 -)))
714 714  
715 -(((
716 716  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
717 -)))
718 718  
719 -(((
720 -Longcheng Street, LongGang District; Shenzhen 518116, China
700 +LongCheng Street, LongGang District ; Shenzhen 518116,China
721 721  
722 722  
723 -
724 -)))
703 +1. FCC Warning
725 725  
726 -= **13. FCC Warning** =
727 -
728 -(((
729 729  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
730 -)))
731 731  
732 -(((
733 733  ~-~- Reorient or relocate the receiving antenna.
734 -)))
735 735  
736 -(((
737 737  ~-~- Increase the separation between the equipment and receiver.
738 -)))
739 739  
740 -(((
741 741  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
742 -)))
743 743  
744 -(((
745 745  ~-~- Consult the dealer or an experienced radio/TV technician for help.
746 -)))
747 747  
748 -(((
715 +
749 749  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
750 -)))
751 751  
752 -(((
718 +
753 753  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
754 -)))
image-20220527114519-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.6 KB
Content
image-20220609104637-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.6 KB
Content
image-20220609104701-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.8 KB
Content
image-20220609104727-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -18.2 KB
Content
image-20220609104741-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.7 KB
Content
image-20220609104805-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.3 KB
Content
image-20220609104813-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.3 KB
Content
image-20220609104907-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.4 KB
Content
image-20220609111027-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.2 KB
Content
image-20220609141625-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -23.7 KB
Content
image-20220609150452-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content