Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 116.1
edited by Kilight Cao
on 2022/06/09 10:48
Change comment: There is no comment for this version
To version 73.2
edited by Xiaoling
on 2022/05/07 14:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D Full Hotspot for Helium
1 +HP0D
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -1,58 +1,130 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1651802206983-860.png||height="427" width="398"]]
4 +[[image:1651802206983-860.png||height="645" width="602"]]
3 3  
4 4  
5 5  (((
6 6  **HP0D Full Hotspot for Helium User Manual**
7 -
8 -
9 9  )))
10 10  
11 -**Table of Contents：**
12 12  
12 +
13 +
14 +
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
18 +==== 1. Introduction ====
17 17  
18 -== **1.1 What is HP0D** ==
20 +===== 1.1 What is HP0D =====
19 19  
20 20  (((
23 +(((
24 +(((
21 21  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
22 22  )))
27 +)))
28 +)))
23 23  
24 24  (((
25 -HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
31 +(((
32 +(((
33 +HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
26 26  )))
35 +)))
36 +)))
27 27  
28 28  (((
29 -(% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
39 +(((
40 +(((
41 +HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
30 30  )))
43 +)))
44 +)))
31 31  
32 32  (((
47 +(((
48 +(((
49 +**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 +)))
51 +)))
52 +)))
53 +
54 +(((
55 +(((
56 +(((
33 33  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
34 34  )))
59 +)))
60 +)))
35 35  
36 -== **1.2 Specifications** ==
37 37  
63 +===== 1.2 Specifications =====
64 +
65 +(((
66 +(((
38 38  **~ Hardware System:**
68 +)))
69 +)))
70 +
71 +(((
72 +(((
39 39   Linux Part:
74 +)))
75 +)))
40 40  
41 -* Raspberry Pi 4
77 +* (((
78 +(((
79 +Raspberry Pi 4
80 +)))
81 +)))
42 42  
83 +(((
84 +(((
43 43  **~ Interface:**
86 +)))
87 +)))
44 44  
45 -* 10M/100M RJ45 Ports x 1
46 -* LoRaWAN Wireless
47 -* Power Input: 12V 2A, DC
89 +* (((
90 +(((
91 +10M/100M RJ45 Ports x 1
92 +)))
93 +)))
94 +* (((
95 +(((
96 +LoRaWAN Wireless
97 +)))
98 +)))
99 +* (((
100 +(((
101 +Power Input: 12V 2A, DC
102 +)))
103 +)))
48 48  
105 +(((
106 +(((
49 49  **~ Operating Condition:**
108 +)))
109 +)))
50 50  
51 -* Work Temperature: -20 ~~ 65°C
52 -* Storage Temperature: -20 ~~ 65°C
53 -* Power Input: 12V 2A, DC
111 +* (((
112 +(((
113 +Work Temperature: -20 ~~ 65°C
114 +)))
115 +)))
116 +* (((
117 +(((
118 +Storage Temperature: -20 ~~ 65°C
119 +)))
120 +)))
121 +* (((
122 +(((
123 +Power Input: 12V 2A, DC
124 +)))
125 +)))
54 54  
55 -== **1.3 Features** ==
127 +===== 1.3 Features =====
56 56  
57 57  * Open-Source Linux system
58 58  * RPi4 with 2G /4G or 8G RAM
... ... @@ -69,635 +69,610 @@
69 69  * Include prepaid $40 onboarding cost and $10 location cost.
70 70  * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
71 71  
72 -== **1.4 Label info and login name** ==
144 +===== 1.4 Label info and login name =====
73 73  
146 +
74 74  [[image:1651803959860-394.png||height="500" width="375"]]
75 75  
76 76  
77 77  
78 -=== 1.4.1 Label information: ===
151 +(((
152 +(((
153 +**~ Label information:**
154 +)))
155 +)))
79 79  
80 -**Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 -**Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 -**Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
83 -**Miner address**:  (% class="mark" %)12xxxxxx(%%)
84 -**Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
85 -**Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
86 -**SN**:  (% class="mark" %)device serial number.
157 +(((
158 +(((
159 +
160 +)))
161 +)))
87 87  
163 +(((
164 +(((
165 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
166 +)))
167 +)))
88 88  
89 -= **2. Quick Start & Onboarding** =
169 +(((
170 +(((
171 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
172 +)))
173 +)))
90 90  
91 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
175 +(((
176 +(((
177 +**~ Miner animal name**: xxx-xxx-xxx
178 +)))
179 +)))
92 92  
181 +(((
182 +(((
183 +**~ Miner address**:          112xxxxxx
184 +)))
185 +)))
93 93  
94 -== **2.1  Connect HP0D Web UI** ==
187 +(((
188 +(((
189 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
190 +)))
191 +)))
95 95  
96 -=== **2.1.1 via HP0D’s Access Point** ===
193 +(((
194 +(((
195 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
196 +)))
197 +)))
97 97  
98 -At the first boot of HP0D, it will auto-generate a Wi-Fi network
199 +(((
200 +(((
201 +**~ SN**:  device serial number.
202 +)))
203 +)))
99 99  
100 100  
101 -[[image:1651804327535-321.png||height="325" width="199"]]
206 +==== 2. Quick Start & Onboarding ====
102 102  
103 -
104 -(% class="box infomessage" %)
105 105  (((
106 - called  : **//HPD-dragino-xxxxxx//**
209 +(((
210 +The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
107 107  )))
212 +)))
108 108  
109 -(% class="box infomessage" %)
214 +(% class="wikigeneratedid" id="H-2" %)
110 110  (((
111 - with password:  **//dragino+dragino//**
112 -You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
216 +
113 113  )))
114 114  
219 +===== 2.1  Connect HP0D Web UI =====
115 115  
116 -[[image:1651804397792-591.png||height="386" width="733"]]
221 +====== 2.1.1 via HP0D’s Access Point. ======
117 117  
223 +(((
224 +(((
225 + At the first boot of HP0D, it will auto generate a Wi-Fi network
118 118  
119 -=== **2.1.2 Connect via HP0D hostname** ===
227 +[[image:1651804327535-321.png||height="325" width="199"]]
228 +)))
229 +)))
120 120  
121 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
231 +(((
232 +(((
233 +
234 +)))
235 +)))
122 122  
123 - Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
237 +(((
238 +(((
239 +(% class="box infomessage" %)
240 +(((
241 + called           : **//HPD-dragino-xxxxxx//**
242 +)))
243 +)))
244 +)))
124 124  
125 -
126 -[[image:1651804629009-699.png]]
127 -
128 -=== **2.1.3 Connect via Ethernet Port** ===
129 -
130 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 -
132 -
133 -//**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
134 -
135 -
136 -[[image:1651804782523-623.png]]
137 -
138 -
139 -== **2.2 Generate QR Code** ==
140 -
141 -
142 142  (((
143 -//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
247 +(((
248 +(% class="box infomessage" %)
249 +(((
250 + with password:  **//dragino+dragino//**
144 144  )))
252 +)))
253 +)))
145 145  
146 146  (((
147 -//Note: After onboarding, this wallet will become the owner of this hotspot.//
256 +(((
257 +
258 +)))
259 +)))
148 148  
261 +(((
262 +(((
149 149  
150 150  )))
265 +)))
151 151  
152 -[[image:image-20220506140312-1.png||height="435" width="438"]]
267 +(((
268 +(((
269 + You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
270 +)))
271 +)))
153 153  
273 +[[image:1651804397792-591.png||height="402" width="763"]]
154 154  
155 -== **2.3 Onboarding Hotspot** ==
156 156  
157 157  
277 +====== 2.1.2 Connect via HP0D hostname ======
278 +
158 158  (((
159 -//**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
280 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
160 160  )))
161 161  
162 162  (((
163 -**//Note: the APP version needs to be greater than 3.11.//**
164 -
165 -
284 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
166 166  )))
167 167  
168 168  (((
169 -//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
170 -
171 -
288 + Web-UI via HP0D’s hostname.
172 172  )))
173 173  
174 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
175 175  
292 + Like: __**//http:~/~/dragino-4ba54a//**__
176 176  
177 -//**3. **Scan the QR Code you generated in the previous step.//
178 178  
179 -[[image:1651828211026-220.png||height="405" width="191"]]
295 +(% style="text-align:center" %)
296 +[[image:1651804629009-699.png]]
180 180  
181 181  
299 +====== 2.1.3 Connect via Ethernet Port ======
300 +
182 182  (((
183 -//**4. **Onboarding your device//
302 +(((
303 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
184 184  )))
305 +)))
185 185  
186 186  (((
187 -Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
308 +(((
309 + router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
310 +)))
311 +)))
188 188  
313 +(((
189 189  
190 190  )))
191 191  
192 -[[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
317 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
193 193  
194 - [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
319 + or SSH access of HP0D.
195 195  
321 +(% style="text-align:center" %)
322 +[[image:1651804782523-623.png]]
196 196  
197 -**5. **//Check onboarding status where you can check from mobile~://
198 198  
199 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
200 200  
326 +===== 2.2 Generate QR Code =====
201 201  
202 -//You can also see the hotspot status in the below link~://
328 +(((
329 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
330 +)))
203 203  
204 -//https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
332 +(((
333 + Note: After onboarding, this wallet will become owner of this hotspot.
334 +)))
205 205  
206 -//Example~://
336 +(% style="text-align:center" %)
337 +[[image:image-20220506140312-1.png||height="435" width="438"]]
207 207  
208 208  
209 -**//Green Synced means hotspot works normally.//**
340 +===== 2.3 Onboarding Hotspot =====
210 210  
211 -[[image:1651828427715-679.png||height="374" width="635"]]
212 -
213 -
214 -== **2.4 Set the Port Forwarding** ==
215 -
216 -
217 217  (((
218 -//Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
343 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
219 219  )))
220 220  
221 -[[image:1651828514449-658.png]]
222 -
223 223  (((
224 -
347 + Note: the APP version need to be greater than 3.11.
225 225  )))
226 226  
227 227  (((
228 -Note: Please refer to more detailed Settings
351 +
229 229  )))
230 230  
231 231  (((
232 -[[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
355 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose
233 233  )))
234 234  
235 235  (((
236 -[[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 -
238 -
359 + the ‘DRAGINO Miner HP0D’
239 239  )))
240 240  
241 -= **3. Check the configuration of HP0D** =
362 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
242 242  
243 -== **3.1 LoRa frequency configuration** ==
364 + 3. Scan the QR Code you generated in the previous step.
244 244  
366 +(% style="text-align:center" %)
367 +[[image:1651828211026-220.png||height="405" width="191"]]
245 245  
246 -[[image:1651828687205-178.png||height="323" width="657"]]
369 + 4. Onboarding your device
247 247  
371 + Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of
248 248  
249 -== **3.2 Check the LoRaWAN Server Address** ==
373 + mobile to onboarding server might have issue.
250 250  
375 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
251 251  
252 -[[image:image-20220607160428-1.png||height="472" width="654"]]
377 + [[image:1651828250802-391.png||height="437" width="205"]] [[image:1651828262668-768.png||height="433" width="204"]]
253 253  
254 254  
255 -== **3.2.1 Configure the Secondary LoRaWAN Server** ==
380 +5. Check onboarding status
256 256  
257 -[[image:image-20220607161130-2.png||height="501" width="1112"]]
382 + You can check from mobile:
258 258  
259 -[[image:image-20220607161603-3.png||height="557" width="1113"]]
384 + [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]]
260 260  
261 -[[image:image-20220607161812-4.png||height="699" width="1115"]]
386 + You can also see the hotspot status in below link:
262 262  
388 + https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
263 263  
264 -[[image:image-20220607162635-5.png||height="339" width="1110"]]
390 + Example:
265 265  
266 -[[image:image-20220607162859-6.png]]
392 + Green Synced means hotspot works normal.
267 267  
268 -== **3.3 Check Miner configuration** ==
394 +(% style="text-align:center" %)
395 +[[image:1651828427715-679.png||height="374" width="635"]]
269 269  
270 270  
271 -[[image:image-20220506181408-1.png||height="451" width="513"]]
398 +===== 2.4 Set the Port Forwarding =====
272 272  
273 273  (((
274 -//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 -
276 -
277 -== **//3.4 Check the Miner state//** ==
278 -
279 -
280 -[[image:image-20220531171836-9.png||height="776" width="1155"]]
281 -
282 -
283 -//**Note: Absorption status can show whether the hotspot is working properly**//
284 -
285 -//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 -
287 - //usually, the nat_type should be '**none'**//
288 -
289 -
401 + Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times
290 290  )))
291 291  
292 -= **4. Installation of Antenna** =
293 -
294 -
295 295  (((
296 -//HP0D uses Fiber Glass Antenna.//
405 + it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues
297 297  )))
298 298  
299 -[[image:1651832158606-882.png]]
300 -
301 301  (((
302 -
409 + you may have.
303 303  )))
304 304  
305 -(((
306 -//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 -)))
412 +(% style="text-align:center" %)
413 +[[image:1651828514449-658.png]]
308 308  
309 309  (((
310 -[[image:1651832205608-998.png||height="349" width="198"]]
311 -
312 312  
313 313  )))
314 314  
315 -= **5. SSH Access for Linux console** =
316 -
317 -
318 -//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
319 -
320 -//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
321 -
322 -//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
323 -
324 -//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
325 -
326 -
327 -Below are screenshots:
328 -
329 -[[image:image-20220608202027-1.png]]
330 -
331 331  (((
332 -**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
420 + Note: Please refer to more detailed Settings
333 333  )))
334 334  
335 335  (((
336 -//Port:  22//
424 + [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
337 337  )))
338 338  
339 339  (((
340 -//User Name:      (% style="color:green" %)**root**//
428 + [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
341 341  )))
342 342  
343 -(((
344 -//Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
345 345  
346 -
347 -)))
432 +==== 3. Check the configuration of HP0D ====
348 348  
349 -(((
350 -//After logging in, you will be in the Linux console and can enter commands as shown below.//
434 +===== 3.1 LoRa frequency configuration =====
351 351  
352 -
353 -)))
436 +(% style="text-align:center" %)
437 +[[image:1651828687205-178.png||height="323" width="657"]]
354 354  
355 -[[image:image-20220608202118-2.png]]
356 356  
357 357  
358 -= **6. How to change the Wireless function of HP0D** =
441 +===== 3.2 Check the LoRaWAN serveraddress =====
359 359  
360 -//The wireless function is configured as AP by default and the web page does not support configuration,//
361 361  
362 -//if you want to configure it as STA(client)connection mode,//
444 +(% style="text-align:center" %)
445 +[[image:1651828703680-156.png||height="349" width="672"]]
363 363  
364 -//you can configure your WiFi info on the** /Network/WiFi **page.//
365 365  
448 +===== 3.3 Check Miner configuration =====
366 366  
367 -**//Note: the wireless state is as AP//**
450 +(% style="text-align:center" %)
451 +[[image:image-20220506181408-1.png||height="451" width="513"]]
368 368  
369 -[[image:image-20220531170243-5.png||height="469" width="967"]]
453 +**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
370 370  
455 +**~ button of Update, and then wait 10mins to check here,**
371 371  
372 -== **6.1 Access WiFi configuration page** ==
373 373  
458 +==== 4. Installation of Antenna ====
374 374  
375 -[[image:image-20220531165803-2.png]]
460 +(((
461 + HP0D use Fiber Glass Antenna.
462 +)))
376 376  
464 +(% style="text-align:center" %)
465 +[[image:1651832158606-882.png]]
377 377  
378 -== **6.2 Enter your WiFi information and save** ==
467 +(((
468 +
469 +)))
379 379  
471 +(((
472 +
473 +)))
380 380  
381 -[[image:image-20220531165958-3.png]]
475 +(((
476 + User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
477 +)))
382 382  
479 +(((
480 + to antenna and install as below:
481 +)))
383 383  
384 -== **6.3 Change the WiFi mode.** ==
483 +(((
484 +(% style="text-align:center" %)
485 +[[image:1651832205608-998.png||height="349" width="198"]]
486 +)))
385 385  
488 +==== 5. SSH Access for Linux console ====
386 386  
387 -[[image:image-20220531170131-4.png]]
490 +(((
491 + IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
492 +)))
388 388  
389 -== **6.4 Wait system to restart** ==
494 +(((
495 + Port:         22
496 +)))
390 390  
391 -
392 -[[image:image-20220531170501-7.png]]
393 -
394 -
395 -//**Note: When the time remaining is finished it will turn to the home page.**//
396 -
397 -
398 -== **6.5 Check the STA state** ==
399 -
400 -
401 -[[image:image-20220531170705-8.png||height="484" width="990"]]
402 -
403 -
404 -= **7. Trouble Shootings** =
405 -
406 -== **7.1 How to get a wallet address?** ==
407 -
408 -
409 -**//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
410 -
411 -
412 -== **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
413 -
414 -
415 415  (((
416 -//Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
499 + User Name:      **root**
417 417  )))
418 418  
419 419  (((
420 -//If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
503 + Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
504 +)))
421 421  
506 +(((
422 422  
423 423  )))
424 424  
425 -== **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
510 +(((
511 + After logging in, you will be in the Linux console and can enter commands as shown below.
512 +)))
426 426  
514 +(% style="text-align:center" %)
515 +[[image:1651832284160-991.png]]
427 427  
428 -[[image:image-20220506182042-2.png||height="250" width="516"]]
429 429  
430 -[[image:1651832455372-647.png||height="224" width="520"]]
518 +==== **6. How to change the Wireless function of HP0D** ====
431 431  
520 + // The wireless function is configured as AP by default and the web page does not support configuration, //
432 432  
433 -**//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
522 +// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
434 434  
435 -**//It might relate to the network which might be up to 10mins.//**
524 +===== **6.1 Access the Linux console.** =====
436 436  
526 + Follow the previous step of Step 5.
437 437  
438 -== **7.4 Onboarding – Bad Gateway** ==
439 439  
529 +===== 6.2 Install the package of network-manager. =====
440 440  
441 -[[image:1651832583790-633.png]]
531 + Run commands:
442 442  
533 +(% class="box infomessage" %)
534 +(((
535 + apt update
536 + apt install network-manager
537 +)))
443 443  
444 -//**This is caused by the process leading too long which just needs to refresh the page.**//
539 +[[image:image-20220507140730-1.png]]
445 445  
446 446  
447 -== **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
448 448  
543 +===== 6.3 Reboot the device. =====
449 449  
450 -[[image:image-20220506182424-3.png]]
545 + Run command:
451 451  
452 -
547 +(% class="box infomessage" %)
453 453  (((
454 -//**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
455 -
456 -
549 + reboot
457 457  )))
458 458  
459 -== **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
552 +[[image:image-20220507140814-2.png]]
460 460  
461 -[[image:1651832742262-209.png||height="297" width="365"]]
554 +===== 6.4 Check the wireless type =====
462 462  
556 + Run command:
463 463  
558 +(% class="box infomessage" %)
464 464  (((
465 -//**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
466 -
467 -
560 + iw dev
468 468  )))
469 469  
470 -== **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
563 +[[image:image-20220507140941-3.png]]
471 471  
565 +===== 6.5 Connect the WiFi. =====
472 472  
473 -[[image:1651832811038-780.png||height="462" width="216"]]
567 + Run command:
474 474  
475 -
569 +(% class="box infomessage" %)
476 476  (((
477 -//**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
478 -
479 -
571 + nmtui
480 480  )))
481 481  
482 -== 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
574 +[[image:image-20220507140953-4.png]]
483 483  
484 484  
485 -(((
486 -//**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
487 487  
488 -
489 -)))
578 +==== 7. Trouble Shootings ====
490 490  
491 -(((
492 -//**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
493 -)))
580 +===== 7.1 How to get a wallet address? =====
494 494  
495 -[[image:1651832880009-473.png]]
582 +// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
496 496  
497 497  
498 -== //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
585 +===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
499 499  
500 -
501 -**//This is caused by the server connection delay, which does not affect the regular use.//**
502 -
503 -[[image:1651832959907-357.png]]
504 -
505 -
506 -== **7.10 Mobile APP crash after scanning the QR Code?** ==
507 -
508 -
509 -* //**Make sure you have input the correct Wallet address to generate QR Code.**//
510 -* //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
511 -* //**Make sure your mobile app’s relevant permission is enabled.**//
512 -* //**Known: The Android 11 version may cause this kind of issue.**//
513 -
514 -== **7.11 Why the frequency/region is not the same as what I purchased?** ==
515 -
516 -
517 517  (((
518 -//**Each HP0D is inspected and configured prior to shipping.**//
588 + User can login the HP0D, able to access other Web Pages except miner page
519 519  )))
520 520  
521 521  (((
522 -//**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
523 -
524 -
592 + If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
525 525  )))
526 526  
527 -== **7.12 Can use the frequency to a region where is no support?** ==
528 528  
596 +===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
529 529  
530 -(((
531 -//**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
532 -)))
598 +(% style="text-align:center" %)
599 +[[image:image-20220506182042-2.png||height="250" width="516"]]
533 533  
534 -(((
535 -[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
601 +(% style="text-align:center" %)
602 +[[image:1651832455372-647.png||height="224" width="520"]]
536 536  
537 -
538 -)))
539 539  
540 -== **7.13 Can change the frequency of the HP0D Miner?** ==
605 + HP0D is establish connection to Helium server and not finished. And you might see above.
541 541  
607 + It might relate to the network where might up to 10mins
542 542  
543 -//We do not recommend doing this, it may damage your device//
544 544  
610 +===== 7.4 Onboarding – Bad Gaterway =====
545 545  
546 -== **7.14 Low Reward and not transmit issue** ==
612 +(% style="text-align:center" %)
613 +[[image:1651832583790-633.png]]
547 547  
615 + This is caused by the process leads too long which just need to refresh the page.
548 548  
549 -//We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
550 550  
551 -//If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
618 +7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
552 552  
553 -[[image:image-20220527114519-1.png||height="579" width="851"]]
620 +(% style="text-align:center" %)
621 +[[image:image-20220506182424-3.png]]
554 554  
623 + This may be related to the current block height, if the device is synchronizing to the latest height or if the
555 555  
556 -== **7.15 Why is my miner version not the latest** ==
625 + device block height is much lower than the current height as the above picture like '1 1', the QR code
557 557  
627 + generation may fail.
558 558  
559 -//By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
560 560  
561 -//However, the download and upgrade may fail due to the network.//
630 +===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
562 562  
563 -//So **We offer a manual check method:**//
632 +(% style="text-align:center" %)
633 +[[image:1651832742262-209.png||height="297" width="365"]]
564 564  
565 - **// Use the "draginoups" command to check//**
635 + Please ensure that you enter the correct wallet address and that your network is up and running, the user can
566 566  
567 -[[image:image-20220601101358-1.png]]
637 + click the button of ‘Clean’ to re-generate the QR Code.
568 568  
569 569  
640 +===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
570 570  
571 -= **8. How to flash OS to SD card** =
642 +(% style="text-align:center" %)
643 +[[image:1651832811038-780.png||height="462" width="216"]]
572 572  
645 + If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
573 573  
574 -//**Preparations:**//
647 + please contact us to help you solve.
575 575  
576 -1. //An SD card with 16GB or more//
577 577  
578 -2. //Download the OS image//
650 +===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
579 579  
580 -3. //A card reader device//
652 +// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
581 581  
582 -4. //A Flash software tool ( Such as balenaEtcher )//
654 + public key/ wallet address to onboarding server. Server will return the match MAC address
583 583  
656 + for this hotspot.
584 584  
585 -=== **Step 1. Select the OS image that requires flash** ===
586 586  
659 + If you don’t see MAC address, make sure your mobile has good internet connection.
587 587  
588 -[[image:image-20220609104813-7.png]]
661 +(% style="text-align:center" %)
662 +[[image:1651832880009-473.png]]
589 589  
590 590  
591 -=== **Step 2. Select the target that requires Flash** ===
665 +===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
592 592  
667 + This is caused by the server connection delay, which does not affect the normal use.
593 593  
594 -[[image:image-20220609104637-2.png]]
595 595  
596 -[[image:image-20220609104701-3.png]]
670 +(% style="text-align:center" %)
671 +[[image:1651832959907-357.png]]
597 597  
673 +===== 7.10 Mobile APP crash after scan the QR Code? =====
598 598  
599 -=== **Step 3. Flash start** ===
675 +* Make sure you have input the correct Wallet address to generate QR Code.
676 +* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
677 +* Make sure your mobile app’s relevant permission are enabled.
678 +* Known: The Android 11 version may cause this kind of issue.
600 600  
680 +1.
681 +11. Why the frequency/region is not the same what I purchased?
601 601  
602 -[[image:image-20220609104727-4.png]]
683 +//Each HP0D is inspected and configured prior to shipping.//
603 603  
604 -[[image:image-20220609104741-5.png]]
685 +//If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
605 605  
606 606  
607 -=== **Flash Complete** ===
688 +1.
689 +11. Can use the frequency to a region where is not support?
608 608  
691 +//Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
609 609  
610 -[[image:image-20220609104415-1.png]]
693 +[[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
611 611  
612 612  
613 -= **9. OTA Version Info** =
696 +1.
697 +11. Can change the frequency of the HP0D Miner?
614 614  
615 -== **When does the OTA update happen?** ==
699 +//We do not recommend doing this, it may damage your device//
616 616  
617 617  
618 -**//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
619 619  
620 -== **# 2022/05/14** ==
621 621  
622 622  
623 -1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
624 -1. //Add postinst after auto-update//
625 -1. //Add Miner version mark.//
626 -1. //Add fast sync if miner GAP is large//
705 +1. Supports
627 627  
628 -== **# 2022/05/24** ==
707 +//If you are experiencing issues and can’t solve, you can send mail to//
629 629  
630 - 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
709 +[[//support@dragino.com//>>mailto:support@dragino.com]]
631 631  
711 +//With your question as detail as possible. We will reply and help you in the shortest.//
632 632  
633 -= **10. Supports** =
634 634  
635 -(((
636 -**//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
637 -)))
638 638  
639 -(((
640 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
641 641  
642 -
643 -)))
716 +1. Order Info
644 644  
645 -= **11. Order Info** =
718 +**HP0D-XXX**
646 646  
647 -(% style="color:#0000ff" %)**HP0D-XXX**
720 +**XXX**: Frequency Band
648 648  
649 -(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
722 +* 868: For Bands: EU868,IN865
723 +* 915: For Bands: US915,AU915,AS923,KR920
650 650  
651 -* **AS923**: LoRaWAN AS923 band
652 -* **AU915**: LoRaWAN AU915 band
653 -* **EU868**: LoRaWAN EU868 band
654 -* **KR920**: LoRaWAN KR920 band
655 -* **US915**: LoRaWAN US915 band
656 -* **IN865**: LoRaWAN IN865 band
725 +1. Manufacturer Info
657 657  
658 -= **12. Manufacturer Info** =
659 -
660 -(((
661 661  **Shenzhen Dragino Technology Development co. LTD**
662 -)))
663 663  
664 -(((
665 665  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
666 -)))
667 667  
668 -(((
669 -Longcheng Street, LongGang District; Shenzhen 518116, China
731 +LongCheng Street, LongGang District ; Shenzhen 518116,China
670 670  
671 671  
672 -
673 -)))
734 +1. FCC Warning
674 674  
675 -= **13. FCC Warning** =
676 -
677 -(((
678 678  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
679 -)))
680 680  
681 -(((
682 682  ~-~- Reorient or relocate the receiving antenna.
683 -)))
684 684  
685 -(((
686 686  ~-~- Increase the separation between the equipment and receiver.
687 -)))
688 688  
689 -(((
690 690  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
691 -)))
692 692  
693 -(((
694 694  ~-~- Consult the dealer or an experienced radio/TV technician for help.
695 -)))
696 696  
697 -(((
746 +
698 698  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
699 -)))
700 700  
701 -(((
749 +
702 702  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
703 -)))
image-20220527114519-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -539.3 KB
Content
image-20220531165755-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
image-20220531165803-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
image-20220531165958-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20220531170131-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -47.2 KB
Content
image-20220531170243-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -352.8 KB
Content
image-20220531170347-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -352.8 KB
Content
image-20220531170501-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -44.4 KB
Content
image-20220531170705-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -366.3 KB
Content
image-20220531171836-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.2 KB
Content
image-20220601101358-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -22.3 KB
Content
image-20220607155338-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -54.9 KB
Content
image-20220607160428-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -61.1 KB
Content
image-20220607161130-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -138.5 KB
Content
image-20220607161603-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
image-20220607161812-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20220607162635-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -155.3 KB
Content
image-20220607162859-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.7 KB
Content
image-20220608202027-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.6 KB
Content
image-20220609104637-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.6 KB
Content
image-20220609104701-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -22.8 KB
Content
image-20220609104727-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -18.2 KB
Content
image-20220609104741-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -44.7 KB
Content
image-20220609104805-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.3 KB
Content
image-20220609104813-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.3 KB
Content