Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 104.1
edited by Kilight Cao
on 2022/06/07 16:31
Change comment: There is no comment for this version
To version 174.5
edited by Xiaoling
on 2022/07/27 15:39
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -HP0D Full Hotspot for Helium
1 +HP0D Full Hotspot for Helium User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -3,7 +3,7 @@
3 3  
4 4  
5 5  (((
6 -**HP0D Full Hotspot for Helium User Manual**
6 +
7 7  
8 8  
9 9  )))
... ... @@ -17,6 +17,7 @@
17 17  
18 18  == **1.1 What is HP0D** ==
19 19  
20 +
20 20  (((
21 21  The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
22 22  )))
... ... @@ -31,6 +31,8 @@
31 31  
32 32  (((
33 33  HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35 +
36 +
34 34  )))
35 35  
36 36  == **1.2 Specifications** ==
... ... @@ -71,6 +71,7 @@
71 71  
72 72  == **1.4 Label info and login name** ==
73 73  
77 +
74 74  [[image:1651803959860-394.png||height="500" width="375"]]
75 75  
76 76  
... ... @@ -77,6 +77,7 @@
77 77  
78 78  === 1.4.1 Label information: ===
79 79  
84 +
80 80  **Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
81 81  **Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
82 82  **Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
... ... @@ -86,15 +86,19 @@
86 86  **SN**:  (% class="mark" %)device serial number.
87 87  
88 88  
94 +
89 89  = **2. Quick Start & Onboarding** =
90 90  
97 +
91 91  The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
92 92  
93 93  
94 94  == **2.1  Connect HP0D Web UI** ==
95 95  
96 -=== **2.1.1 via HP0D’s Access Point** ===
97 97  
104 +=== **2.1.1 via HP0D's Access Point** ===
105 +
106 +
98 98  At the first boot of HP0D, it will auto-generate a Wi-Fi network
99 99  
100 100  
... ... @@ -116,8 +116,10 @@
116 116  [[image:1651804397792-591.png||height="386" width="733"]]
117 117  
118 118  
128 +
119 119  === **2.1.2 Connect via HP0D hostname** ===
120 120  
131 +
121 121  Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
122 122  
123 123   Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
... ... @@ -125,8 +125,11 @@
125 125  
126 126  [[image:1651804629009-699.png]]
127 127  
139 +
140 +
128 128  === **2.1.3 Connect via Ethernet Port** ===
129 129  
143 +
130 130  //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
131 131  
132 132  
... ... @@ -136,15 +136,16 @@
136 136  [[image:1651804782523-623.png]]
137 137  
138 138  
153 +
139 139  == **2.2 Generate QR Code** ==
140 140  
141 141  
142 142  (((
143 -//Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.//
158 +//Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
144 144  )))
145 145  
146 146  (((
147 -//Note: After onboarding, this wallet will become the owner of this hotspot.//
162 +(% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
148 148  
149 149  
150 150  )))
... ... @@ -152,6 +152,7 @@
152 152  [[image:image-20220506140312-1.png||height="435" width="438"]]
153 153  
154 154  
170 +
155 155  == **2.3 Onboarding Hotspot** ==
156 156  
157 157  
... ... @@ -160,13 +160,13 @@
160 160  )))
161 161  
162 162  (((
163 -**//Note: the APP version needs to be greater than 3.11.//**
179 +(% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
164 164  
165 165  
166 166  )))
167 167  
168 168  (((
169 -//**2. **To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’//
185 +//**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
170 170  
171 171  
172 172  )))
... ... @@ -174,11 +174,13 @@
174 174   [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
175 175  
176 176  
193 +
177 177  //**3. **Scan the QR Code you generated in the previous step.//
178 178  
179 179  [[image:1651828211026-220.png||height="405" width="191"]]
180 180  
181 181  
199 +
182 182  (((
183 183  //**4. **Onboarding your device//
184 184  )))
... ... @@ -211,6 +211,7 @@
211 211  [[image:1651828427715-679.png||height="374" width="635"]]
212 212  
213 213  
232 +
214 214  == **2.4 Set the Port Forwarding** ==
215 215  
216 216  
... ... @@ -225,7 +225,7 @@
225 225  )))
226 226  
227 227  (((
228 -Note: Please refer to more detailed Settings
247 +(% style="color:red" %)**Note: Please refer to more detailed Settings**
229 229  )))
230 230  
231 231  (((
... ... @@ -235,6 +235,7 @@
235 235  (((
236 236  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
237 237  
257 +
238 238  
239 239  )))
240 240  
... ... @@ -246,6 +246,7 @@
246 246  [[image:1651828687205-178.png||height="323" width="657"]]
247 247  
248 248  
269 +
249 249  == **3.2 Check the LoRaWAN Server Address** ==
250 250  
251 251  
... ... @@ -252,28 +252,31 @@
252 252  [[image:image-20220607160428-1.png||height="472" width="654"]]
253 253  
254 254  
276 +
255 255  == **3.2.1 Configure the Secondary LoRaWAN Server** ==
256 256  
279 +
257 257  [[image:image-20220607161130-2.png||height="501" width="1112"]]
258 258  
282 +
259 259  [[image:image-20220607161603-3.png||height="557" width="1113"]]
260 260  
285 +
261 261  [[image:image-20220607161812-4.png||height="699" width="1115"]]
262 262  
263 263  
264 -[[image:image-20220607162635-5.png||height="339" width="1110"]]
265 265  
266 -[[image:image-20220607162859-6.png]]
267 -
268 268  == **3.3 Check Miner configuration** ==
269 269  
270 270  
271 271  [[image:image-20220506181408-1.png||height="451" width="513"]]
272 272  
295 +
273 273  (((
274 -//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
297 +(% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
275 275  
276 276  
300 +
277 277  == **//3.4 Check the Miner state//** ==
278 278  
279 279  
... ... @@ -280,12 +280,13 @@
280 280  [[image:image-20220531171836-9.png||height="776" width="1155"]]
281 281  
282 282  
283 -//**Note: Absorption status can show whether the hotspot is working properly**//
307 +(% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly**//
284 284  
285 -//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
309 +(% style="color:red" %)//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
286 286  
287 - //usually, the nat_type should be '**none'**//
311 + (% style="color:red" %)** //usually, the nat_type should be '//**(% style="color:blue" %)**//none'//**
288 288  
313 +
289 289  
290 290  )))
291 291  
... ... @@ -303,12 +303,13 @@
303 303  )))
304 304  
305 305  (((
306 -//The user needs to connect the antenna cable’s SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
331 +//The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
307 307  )))
308 308  
309 309  (((
310 310  [[image:1651832205608-998.png||height="349" width="198"]]
311 311  
337 +
312 312  
313 313  )))
314 314  
... ... @@ -315,8 +315,21 @@
315 315  = **5. SSH Access for Linux console** =
316 316  
317 317  
344 +//Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
345 +
346 +//In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
347 +
348 +//You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
349 +
350 +//Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
351 +
352 +
353 +Below are screenshots:
354 +
355 +[[image:image-20220608202027-1.png]]
356 +
318 318  (((
319 -**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-63920a(%%))//**
358 +**//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
320 320  )))
321 321  
322 322  (((
... ... @@ -339,7 +339,7 @@
339 339  
340 340  )))
341 341  
342 -[[image:1651832284160-991.png||height="171" width="729"]]
381 +[[image:image-20220608202118-2.png]]
343 343  
344 344  
345 345  = **6. How to change the Wireless function of HP0D** =
... ... @@ -547,16 +547,288 @@
547 547  
548 548  //However, the download and upgrade may fail due to the network.//
549 549  
550 -//So **We offer a manual check method:**//
589 +You can reboot your hotspot where the hotspot will try to upgrade when per booting.
551 551  
552 - **// Use the "draginoups" command to check//**
553 553  
592 +//and **We offer manual check methods:**//
593 +
594 + **// Use the "draginoups" command to check//**
595 +
596 +
597 +**//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
598 +
554 554  [[image:image-20220601101358-1.png]]
555 555  
556 556  
557 557  
558 -= **8. OTA Version Info** =
603 +== **7.16 Why is my miner running down?** ==
559 559  
605 +//the default, the Miner is managed by docker.//
606 +
607 +//If you find the miner is offline where the miner is running down.//
608 +
609 +
610 +**What You can do?**
611 +
612 +**~1. Reboot the hotspot and check again.**
613 +
614 +//Usually, if the miner is just down, then a reboot is the quickest way//
615 +
616 +
617 +**2. Reinstall the Miner manually.**
618 +
619 +//If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
620 +
621 + **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
622 +
623 +
624 + **2). Run the "//minerup updat//e" command to reinstall the miner**
625 +
626 +
627 +
628 +[[image:image-20220610094825-2.png||height="457" width="835"]]
629 +
630 +[[image:image-20220610094755-1.png||height="706" width="834"]]
631 +
632 +
633 +== **7.17 More commands for debugging.** ==
634 +
635 +
636 +**I'm trapped somewhere, what can I do first?**
637 +
638 +
639 +//dragino provides a method of self-testing//
640 +
641 +//1.) Is Hotspot's Miner running?//
642 +
643 +//2). Is the miner version up to date?//
644 +
645 +//3). Is the height gap between local height and remote height kept within 100//
646 +
647 +
648 +**//Note: You can find the above three points on the Miner page, and //**
649 +
650 +**//If you are familiar with the Linux command line you can use the following command//**
651 +
652 +
653 +(% class="box infomessage" %)
654 +(((
655 +minerup update  #~-~-> reinstall miner but not clearing memory
656 +minerup flush  #~-~->  reinstall miner and clear memory
657 +minerup snap  #~-~->  load a snap_short to sync the block height
658 +minerup gap  #~-~->  check the height between local and remote.
659 +draginoup  #~-~->  check the miner version gap between local and remote.
660 +
661 +
662 +doker ps  #~-~-> show the miner running state
663 +miner versions  #~-~-> show the miner  version
664 +)))
665 +
666 +
667 +== **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
668 +
669 +
670 +//**This is the result of the OTA not being updated in time**//
671 +
672 +//**You can reboot your hotspot or upgrade these packages manually.**//
673 +
674 +
675 +(% class="box infomessage" %)
676 +(((
677 +**apt update**
678 +**apt install dragino***
679 +)))
680 +
681 +
682 += **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
683 +
684 +The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
685 +
686 +So you have to re-flash the image into the SD card.
687 +
688 +**Warning:  Do not reset unless necessary**
689 +
690 +
691 +//**Preparations:**//
692 +
693 +1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
694 +
695 +2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
696 +
697 +3. //A card reader device//
698 +
699 +4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
700 +
701 +5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
702 +
703 +
704 +**HP0D's enclosure**
705 +
706 +
707 +[[image:image-20220615204902-1.png||height="633" width="918"]]
708 +
709 +
710 +[[image:image-20220615204917-2.png||height="1038" width="922"]]
711 +
712 +
713 +
714 +=== **Step 1.  Formatting the SD Card** ===
715 +
716 +
717 +[[image:image-20220609111027-9.png]]
718 +
719 +
720 +=== **Step 2. Select the OS image ** ===
721 +
722 +
723 +[[image:image-20220609104907-8.png]]
724 +
725 +
726 +=== **Step 3. Select the target ** ===
727 +
728 +
729 +[[image:image-20220609104637-2.png]]
730 +
731 +[[image:image-20220609104701-3.png]]
732 +
733 +
734 +=== **Step 4. Flash start** ===
735 +
736 +
737 +[[image:image-20220609104727-4.png]]
738 +
739 +[[image:image-20220609104741-5.png]]
740 +
741 +
742 +=== **Flash Complete** ===
743 +
744 +
745 +[[image:image-20220609104415-1.png]]
746 +
747 +
748 +== **Step 4. Re-install the SD card into the hotspot and boot it** ==
749 +
750 +
751 +== **Step 5. Configure the correct region for the miner** ==
752 +
753 +**by the default, the factory settings apply to the US915.**
754 +
755 +**if your region is not the US915, you have to configure the correct region for the miner.**
756 +
757 +
758 +**Access the hotspot CLI, and run these Linux commands**
759 +
760 +
761 +(% class="box infomessage" %)
762 +(((
763 +~#~##update the software of dragino
764 +
765 +apt update
766 +
767 +apt install dragino*
768 +)))
769 +
770 +[[image:image-20220609150452-2.png||height="348" width="909"]]
771 +
772 +
773 +
774 +(% class="box infomessage" %)
775 +(((
776 +~#~##configure the correct region for the miner and update it
777 +
778 +uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
779 +
780 +uci commit miner
781 +
782 +minerup update
783 +)))
784 +
785 +[[image:image-20220609151513-5.png]]
786 +
787 +
788 +(% class="box infomessage" %)
789 +(((
790 +~#~##check the miner version
791 +
792 +draginoups
793 +)))
794 +
795 +[[image:image-20220609151419-3.png]]
796 +
797 +
798 +(% class="box infomessage" %)
799 +(((
800 +~#~##unblock the function of wireless
801 +rfkill unblock wlan
802 +uci set wireless.general.mode=ap
803 +uci commit wireless
804 +)))
805 +
806 +[[image:image-20220609161204-1.png]]
807 +
808 +
809 +
810 += **9. How does the HP0D access to the network via a USB 4G Dongle** =
811 +
812 +We have reserved enough space inside the HP0D to use a USB 4G Dongle,
813 +
814 +so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
815 +
816 +
817 +//**Preparations:**//
818 +
819 +//**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
820 +
821 +//**2). A Sim card that can access the 4g network.**//
822 +
823 +//**3). open the hotspot's shell.**//
824 +
825 +
826 +== **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
827 +
828 +[[image:image-20220627153334-2.png]]
829 +
830 +
831 +== **9.2. Checking the USB 4G Dongle network** ==
832 +
833 +We have installed drivers for common USB 4G Dongle,
834 +
835 +and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
836 +
837 +
838 +//HUAWEI-E3327//
839 +
840 +[[image:image-20220627154526-9.png||height="762" width="725"]]
841 +
842 +
843 +//ZTE//
844 +
845 +[[image:image-20220627154201-5.png]]
846 +
847 +
848 +
849 += **10. PoE introduction** =
850 +
851 +
852 +//The HP0D is use the **IEEE 802.3 af compliant PoE port** (input 44 ~~ 57 v, output 12V)//
853 +
854 +//So you can use the PoE //switches// or PoE injector to power the device.//
855 +
856 +
857 +**Note: The RJ45 Indicator light only represents the PoE power supply, **
858 +
859 +**so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
860 +
861 +
862 +**Wiring schematic:**
863 +
864 +[[image:image-20220616143347-1.png]]
865 +
866 +
867 +
868 +
869 += **11. OTA Version Info** =
870 +
560 560  == **When does the OTA update happen?** ==
561 561  
562 562  
... ... @@ -570,13 +570,26 @@
570 570  1. //Add Miner version mark.//
571 571  1. //Add fast sync if miner GAP is large//
572 572  
884 +== **# 2022/05/18** ==
885 +
886 +
887 +1. //Update minerup to speed up synchronized blocks//
888 +
573 573  == **# 2022/05/24** ==
574 574  
575 - 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
576 576  
892 +1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
577 577  
578 -= **9. Supports** =
894 +== **# 2022/05/31** ==
579 579  
896 +1. //Add WiFi STA icon display//
897 +1. //Optimize AP icon display//
898 +1. //Optimize home icon display//
899 +1. //Fix for Miner icon URL bug//
900 +1. //Add the secondary server configuration//
901 +
902 += **12. Supports** =
903 +
580 580  (((
581 581  **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
582 582  )))
... ... @@ -587,7 +587,7 @@
587 587  
588 588  )))
589 589  
590 -= **10. Order Info** =
914 += **13. Order Info** =
591 591  
592 592  (% style="color:#0000ff" %)**HP0D-XXX**
593 593  
... ... @@ -600,7 +600,7 @@
600 600  * **US915**: LoRaWAN US915 band
601 601  * **IN865**: LoRaWAN IN865 band
602 602  
603 -= **11. Manufacturer Info** =
927 += **14. Manufacturer Info** =
604 604  
605 605  (((
606 606  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -617,7 +617,7 @@
617 617  
618 618  )))
619 619  
620 -= **12. FCC Warning** =
944 += **15. FCC Warning** =
621 621  
622 622  (((
623 623  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
image-20220608202027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.3 KB
Content
image-20220608202118-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20220609104415-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
image-20220609104637-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20220609104701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.8 KB
Content
image-20220609104727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +18.2 KB
Content
image-20220609104741-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.7 KB
Content
image-20220609104805-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104813-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.3 KB
Content
image-20220609104907-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.4 KB
Content
image-20220609111027-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.2 KB
Content
image-20220609141625-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
image-20220609150452-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20220609150849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +4.3 KB
Content
image-20220609150903-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20220609151419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +3.7 KB
Content
image-20220609151435-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20220609151513-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +41.1 KB
Content
image-20220609161204-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
image-20220610094755-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220610094825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +128.0 KB
Content
image-20220615204902-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +4.4 MB
Content
image-20220615204917-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.0 MB
Content
image-20220616143347-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +11.8 KB
Content
image-20220627153256-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +156.4 KB
Content
image-20220627153334-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +279.9 KB
Content
image-20220627153917-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220627153958-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.6 KB
Content
image-20220627154201-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +74.0 KB
Content
image-20220627154412-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +74.0 KB
Content
image-20220627154459-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +74.0 KB
Content
image-20220627154526-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content