Skip to Content
Version 174.5 by Xiaoling on 2022/07/27 15:39
Show last authors
1 (% style="text-align:center" %)
2 [[image:1651802206983-860.png||height="427" width="398"]]
3
4
5 (((
6
7
8
9 )))
10
11 **Table of Contents：**
12
13 {{toc/}}
14
15
16 = **1. Introduction** =
17
18 == **1.1 What is HP0D** ==
19
20
21 (((
22 The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 HP0D has passed Helium Full Hotspot Approval. It supports the (% style="color:#037691" %)** miner feature from Helium** (% style="color:black" %) and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, (% style="color:#037691" %)**users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
27 )))
28
29 (((
30 (% style="color:#037691" %)**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. (% style="color:black" %)It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
31 )))
32
33 (((
34 HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
35
36
37 )))
38
39 == **1.2 Specifications** ==
40
41 **~ Hardware System:**
42 Linux Part:
43
44 * Raspberry Pi 4
45
46 **~ Interface:**
47
48 * 10M/100M RJ45 Ports x 1
49 * LoRaWAN Wireless
50 * Power Input: 12V 2A, DC
51
52 **~ Operating Condition:**
53
54 * Work Temperature: -20 ~~ 65°C
55 * Storage Temperature: -20 ~~ 65°C
56 * Power Input: 12V 2A, DC
57
58 == **1.3 Features** ==
59
60 * Open-Source Linux system
61 * RPi4 with 2G /4G or 8G RAM
62 * Managed by Web GUI, SSH via Internet
63 * Support Semtech UDP packet forwarder
64 * Support LoRaWAN Station Connection
65 * Support Helium Miner
66 * External fiberglass antenna
67 * Firmware OTA
68 * 802.3af PoE
69 * Lighting Protection
70 * Remote Monitoring
71 * Support Helium LoRaWAN server and secondary LoRaWAN server
72 * Include prepaid $40 onboarding cost and $10 location cost.
73 * [[Remote.it remote management>>url:https://wiki.dragino.com/index.php?title=Reverse_SSH_Access#Use_Remote.it_service]].
74
75 == **1.4 Label info and login name** ==
76
77
78 [[image:1651803959860-394.png||height="500" width="375"]]
79
80
81
82 === 1.4.1 Label information: ===
83
84
85 **Device hostname:**  (% class="mark" %)dragino-xxxxxx(%%)
86 **Band**:  (% class="mark" %)US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864(%%)
87 **Miner animal name**: (% class="mark" %)xxx-xxx-xxx(%%)
88 **Miner address**:  (% class="mark" %)12xxxxxx(%%)
89 **Eth MAC address**:  (% class="mark" %)A8: 40: 41: EF: FE: CD(%%)
90 **Login**:  (% class="mark" %)root/d59f2d5b (the root is the Login account for the Web-UI and SSH.)(%%)
91 **SN**:  (% class="mark" %)device serial number.
92
93
94
95 = **2. Quick Start & Onboarding** =
96
97
98 The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
99
100
101 == **2.1  Connect HP0D Web UI** ==
102
103
104 === **2.1.1 via HP0D's Access Point** ===
105
106
107 At the first boot of HP0D, it will auto-generate a Wi-Fi network
108
109
110 [[image:1651804327535-321.png||height="325" width="199"]]
111
112
113 (% class="box infomessage" %)
114 (((
115 called  : **//HPD-dragino-xxxxxx//**
116 )))
117
118 (% class="box infomessage" %)
119 (((
120 with password:  **//dragino+dragino//**
121 You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
122 )))
123
124
125 [[image:1651804397792-591.png||height="386" width="733"]]
126
127
128
129 === **2.1.2 Connect via HP0D hostname** ===
130
131
132 Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
133
134 Like: (% class="mark" %)__**//http:~/~/dragino-4ba54a//**__
135
136
137 [[image:1651804629009-699.png]]
138
139
140
141 === **2.1.3 Connect via Ethernet Port** ===
142
143
144 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.//
145
146
147 //**If you get the IP address from the router, like: (% class="mark" %)10.130.2.42(%%), you can use this IP address to connect the WEB UI or SSH access of HP0D.**//
148
149
150 [[image:1651804782523-623.png]]
151
152
153
154 == **2.2 Generate QR Code** ==
155
156
157 (((
158 //Go to (% style="color:#037691" %)**Miner** ~-~-> **QR Generate**(%%), input your Helium Wallet Address, and click Generate.//
159 )))
160
161 (((
162 (% style="color:red" %)**//Note: After onboarding, this wallet will become the owner of this hotspot.//**
163
164
165 )))
166
167 [[image:image-20220506140312-1.png||height="435" width="438"]]
168
169
170
171 == **2.3 Onboarding Hotspot** ==
172
173
174 (((
175 //**1.** Download the Helium Hotspot APP from the Apple or Google Play store.//
176 )))
177
178 (((
179 (% style="color:red" %)**//Note: the APP version needs to be greater than 3.11.//**
180
181
182 )))
183
184 (((
185 //**2. **To add a hotspot, select (% style="color:blue" %)**“Hotspot”**(%%). On this tab, click the** (% style="color:blue" %)“+ Add Hotspot"(%%)** in the mid where choose the  (% style="color:blue" %)**"DRAGINO Miner HP0D"**//
186
187
188 )))
189
190 [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
191
192
193
194 //**3. **Scan the QR Code you generated in the previous step.//
195
196 [[image:1651828211026-220.png||height="405" width="191"]]
197
198
199
200 (((
201 //**4. **Onboarding your device//
202 )))
203
204 (((
205 Mobile APP will get info from the onboarding server. If the MAC address doesn’t appear, it means the network connection of the mobile to the onboarding server might have an issue.  
206
207
208 )))
209
210 [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]]
211
212 [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
213
214
215 **5. **//Check onboarding status where you can check from mobile~://
216
217 [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
218
219
220 //You can also see the hotspot status in the below link~://
221
222 //https:~/~/explorer.helium.com/hotspots/**<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>**//
223
224 //Example~://
225
226
227 **//Green Synced means hotspot works normally.//**
228
229 [[image:1651828427715-679.png||height="374" width="635"]]
230
231
232
233 == **2.4 Set the Port Forwarding** ==
234
235
236 (((
237 //Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.//
238 )))
239
240 [[image:1651828514449-658.png]]
241
242 (((
243
244 )))
245
246 (((
247 (% style="color:red" %)**Note: Please refer to more detailed Settings**
248 )))
249
250 (((
251 [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
252 )))
253
254 (((
255 [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
256
257
258
259 )))
260
261 = **3. Check the configuration of HP0D** =
262
263 == **3.1 LoRa frequency configuration** ==
264
265
266 [[image:1651828687205-178.png||height="323" width="657"]]
267
268
269
270 == **3.2 Check the LoRaWAN Server Address** ==
271
272
273 [[image:image-20220607160428-1.png||height="472" width="654"]]
274
275
276
277 == **3.2.1 Configure the Secondary LoRaWAN Server** ==
278
279
280 [[image:image-20220607161130-2.png||height="501" width="1112"]]
281
282
283 [[image:image-20220607161603-3.png||height="557" width="1113"]]
284
285
286 [[image:image-20220607161812-4.png||height="699" width="1115"]]
287
288
289
290 == **3.3 Check Miner configuration** ==
291
292
293 [[image:image-20220506181408-1.png||height="451" width="513"]]
294
295
296 (((
297 (% style="color:red" %)//**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.**//
298
299
300
301 == **//3.4 Check the Miner state//** ==
302
303
304 [[image:image-20220531171836-9.png||height="776" width="1155"]]
305
306
307 (% style="color:red" %)//**Note: Absorption status can show whether the hotspot is working properly**//
308
309 (% style="color:red" %)//** The p2p network can see how your hotspot is interacting with the surrounding hotspots**//
310
311 (% style="color:red" %)** //usually, the nat_type should be '//**(% style="color:blue" %)**//none'//**
312
313
314
315 )))
316
317 = **4. Installation of Antenna** =
318
319
320 (((
321 //HP0D uses Fiber Glass Antenna.//
322 )))
323
324 [[image:1651832158606-882.png]]
325
326 (((
327
328 )))
329
330 (((
331 //The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below~://
332 )))
333
334 (((
335 [[image:1651832205608-998.png||height="349" width="198"]]
336
337
338
339 )))
340
341 = **5. SSH Access for Linux console** =
342
343
344 //Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.//
345
346 //In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.//
347
348 //You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.//
349
350 //Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as **[[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]**) to access it.//
351
352
353 Below are screenshots:
354
355 [[image:image-20220608202027-1.png]]
356
357 (((
358 **//IP address:  IP address of HP0D or hostname of HP0D ((% class="mark" %)Such as dragino-7df4af(%%))//**
359 )))
360
361 (((
362 //Port:  22//
363 )))
364
365 (((
366 //User Name:      (% style="color:green" %)**root**//
367 )))
368
369 (((
370 //Password:         (% style="color:green" %)**Randomly generated （found on device’s label）**//
371
372
373 )))
374
375 (((
376 //After logging in, you will be in the Linux console and can enter commands as shown below.//
377
378
379 )))
380
381 [[image:image-20220608202118-2.png]]
382
383
384 = **6. How to change the Wireless function of HP0D** =
385
386 //The wireless function is configured as AP by default and the web page does not support configuration,//
387
388 //if you want to configure it as STA(client)connection mode,//
389
390 //you can configure your WiFi info on the** /Network/WiFi **page.//
391
392
393 **//Note: the wireless state is as AP//**
394
395 [[image:image-20220531170243-5.png||height="469" width="967"]]
396
397
398 == **6.1 Access WiFi configuration page** ==
399
400
401 [[image:image-20220531165803-2.png]]
402
403
404 == **6.2 Enter your WiFi information and save** ==
405
406
407 [[image:image-20220531165958-3.png]]
408
409
410 == **6.3 Change the WiFi mode.** ==
411
412
413 [[image:image-20220531170131-4.png]]
414
415 == **6.4 Wait system to restart** ==
416
417
418 [[image:image-20220531170501-7.png]]
419
420
421 //**Note: When the time remaining is finished it will turn to the home page.**//
422
423
424 == **6.5 Check the STA state** ==
425
426
427 [[image:image-20220531170705-8.png||height="484" width="990"]]
428
429
430 = **7. Trouble Shootings** =
431
432 == **7.1 How to get a wallet address?** ==
433
434
435 **//Download the helium Hotspots APP on the Apple or Google Play store to generate your own wallet.//**
436
437
438 == **7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner** ==
439
440
441 (((
442 //Users can log in to the HP0D, able to access other Web Pages except for the miner page.//
443 )))
444
445 (((
446 //If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.//
447
448
449 )))
450
451 == **7.3 Onboarding ~-~- Some parameters on the miner page show timeout** ==
452
453
454 [[image:image-20220506182042-2.png||height="250" width="516"]]
455
456 [[image:1651832455372-647.png||height="224" width="520"]]
457
458
459 **//HP0D is establishing a connection to the Helium server and is not finished. And you might see above.//**
460
461 **//It might relate to the network which might be up to 10mins.//**
462
463
464 == **7.4 Onboarding – Bad Gateway** ==
465
466
467 [[image:1651832583790-633.png]]
468
469
470 //**This is caused by the process leading too long which just needs to refresh the page.**//
471
472
473 == **7.5 Onboarding ~-~- Why did QR Code generate aways fail?** ==
474
475
476 [[image:image-20220506182424-3.png]]
477
478
479 (((
480 //**This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.**//
481
482
483 )))
484
485 == **7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual?** ==
486
487 [[image:1651832742262-209.png||height="297" width="365"]]
488
489
490 (((
491 //**Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.**//
492
493
494 )))
495
496 == **7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code** ==
497
498
499 [[image:1651832811038-780.png||height="462" width="216"]]
500
501
502 (((
503 //**If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.**//
504
505
506 )))
507
508 == 7.8 Onboarding – MAC address is being refreshed after scanning the QR Code ==
509
510
511 (((
512 //**After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.**//
513
514
515 )))
516
517 (((
518 //**If you don’t see the MAC address, make sure your mobile has a good internet connection.**//
519 )))
520
521 [[image:1651832880009-473.png]]
522
523
524 == //**7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’**// ==
525
526
527 **//This is caused by the server connection delay, which does not affect the regular use.//**
528
529 [[image:1651832959907-357.png]]
530
531
532 == **7.10 Mobile APP crash after scanning the QR Code?** ==
533
534
535 * //**Make sure you have input the correct Wallet address to generate QR Code.**//
536 * //**Make sure your mobile app uses the same wallet address as the one to generate QR Code.**//
537 * //**Make sure your mobile app’s relevant permission is enabled.**//
538 * //**Known: The Android 11 version may cause this kind of issue.**//
539
540 == **7.11 Why the frequency/region is not the same as what I purchased?** ==
541
542
543 (((
544 //**Each HP0D is inspected and configured prior to shipping.**//
545 )))
546
547 (((
548 //**If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.**//
549
550
551 )))
552
553 == **7.12 Can use the frequency to a region where is no support?** ==
554
555
556 (((
557 //**Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:**//
558 )))
559
560 (((
561 [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
562
563
564 )))
565
566 == **7.13 Can change the frequency of the HP0D Miner?** ==
567
568
569 //We do not recommend doing this, it may damage your device//
570
571
572 == **7.14 Low Reward and not transmit issue** ==
573
574
575 //We had released the 0524 version for the miner, Users can check the miner version in the HP0D web UI.//
576
577 //If it is lower than the 0524 version, users can manually upgrade it via the 'draginoups' command in the HP0D's CLI.//
578
579 [[image:image-20220527114519-1.png||height="579" width="851"]]
580
581
582 == **7.15 Why is my miner version not the latest** ==
583
584
585 //By default, as soon as a new version of helium is released, we will push the upgrade the same day.//
586
587 //However, the download and upgrade may fail due to the network.//
588
589 You can reboot your hotspot where the hotspot will try to upgrade when per booting.
590
591
592 //and **We offer manual check methods:**//
593
594 **// Use the "draginoups" command to check//**
595
596
597 **//Note: How to access the hotspot CLI refer to ( Such as //**//[[Step 5.>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D#H5.SSHAccessforLinuxconsole]]** )**//
598
599 [[image:image-20220601101358-1.png]]
600
601
602
603 == **7.16 Why is my miner running down?** ==
604
605 //the default, the Miner is managed by docker.//
606
607 //If you find the miner is offline where the miner is running down.//
608
609
610 **What You can do?**
611
612 **~1. Reboot the hotspot and check again.**
613
614 //Usually, if the miner is just down, then a reboot is the quickest way//
615
616
617 **2. Reinstall the Miner manually.**
618
619 //If rebooting does not solve the problem you can reinstall MINER by one of the following methods//
620
621 **1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.**
622
623
624 **2). Run the "//minerup updat//e" command to reinstall the miner**
625
626
627
628 [[image:image-20220610094825-2.png||height="457" width="835"]]
629
630 [[image:image-20220610094755-1.png||height="706" width="834"]]
631
632
633 == **7.17 More commands for debugging.** ==
634
635
636 **I'm trapped somewhere, what can I do first?**
637
638
639 //dragino provides a method of self-testing//
640
641 //1.) Is Hotspot's Miner running?//
642
643 //2). Is the miner version up to date?//
644
645 //3). Is the height gap between local height and remote height kept within 100//
646
647
648 **//Note: You can find the above three points on the Miner page, and //**
649
650 **//If you are familiar with the Linux command line you can use the following command//**
651
652
653 (% class="box infomessage" %)
654 (((
655 minerup update  #~-~-> reinstall miner but not clearing memory
656 minerup flush  #~-~->  reinstall miner and clear memory
657 minerup snap  #~-~->  load a snap_short to sync the block height
658 minerup gap  #~-~->  check the height between local and remote.
659 draginoup  #~-~->  check the miner version gap between local and remote.
660
661
662 doker ps  #~-~-> show the miner running state
663 miner versions  #~-~-> show the miner  version
664 )))
665
666
667 == **7.18 Why does my hotspot not have some of the features described in this WiKi** ==
668
669
670 //**This is the result of the OTA not being updated in time**//
671
672 //**You can reboot your hotspot or upgrade these packages manually.**//
673
674
675 (% class="box infomessage" %)
676 (((
677 **apt update**
678 **apt install dragino***
679 )))
680
681
682 = **8. How to flash a new OS for the hotspot, the hotspot's setting will be factory settings** =
683
684 The hotspot is based on the Rpi-4B so the OS has been installed on the SD card.
685
686 So you have to re-flash the image into the SD card.
687
688 **Warning:  Do not reset unless necessary**
689
690
691 //**Preparations:**//
692
693 1. //Open the HP0D shell, and take out the SD card from the Raspberry PI 4B (Make sure the SD card is empty )//
694
695 2. //Download the OS image~: ( Such as **[[draginohp0d-1.9img>>url:http://repo.dragino.com/release/hp0d-image/draginohp0d-1.9.img]]** )//
696
697 3. //A card reader device//
698
699 4. //A Flash software tool ( Such as **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
700
701 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**//
702
703
704 **HP0D's enclosure**
705
706
707 [[image:image-20220615204902-1.png||height="633" width="918"]]
708
709
710 [[image:image-20220615204917-2.png||height="1038" width="922"]]
711
712
713
714 === **Step 1.  Formatting the SD Card** ===
715
716
717 [[image:image-20220609111027-9.png]]
718
719
720 === **Step 2. Select the OS image ** ===
721
722
723 [[image:image-20220609104907-8.png]]
724
725
726 === **Step 3. Select the target ** ===
727
728
729 [[image:image-20220609104637-2.png]]
730
731 [[image:image-20220609104701-3.png]]
732
733
734 === **Step 4. Flash start** ===
735
736
737 [[image:image-20220609104727-4.png]]
738
739 [[image:image-20220609104741-5.png]]
740
741
742 === **Flash Complete** ===
743
744
745 [[image:image-20220609104415-1.png]]
746
747
748 == **Step 4. Re-install the SD card into the hotspot and boot it** ==
749
750
751 == **Step 5. Configure the correct region for the miner** ==
752
753 **by the default, the factory settings apply to the US915.**
754
755 **if your region is not the US915, you have to configure the correct region for the miner.**
756
757
758 **Access the hotspot CLI, and run these Linux commands**
759
760
761 (% class="box infomessage" %)
762 (((
763 ~#~##update the software of dragino
764
765 apt update
766
767 apt install dragino*
768 )))
769
770 [[image:image-20220609150452-2.png||height="348" width="909"]]
771
772
773
774 (% class="box infomessage" %)
775 (((
776 ~#~##configure the correct region for the miner and update it
777
778 uci set miner.general.region=<Region; Such as AS923_1/AU915/US915/EU868/IN865>
779
780 uci commit miner
781
782 minerup update
783 )))
784
785 [[image:image-20220609151513-5.png]]
786
787
788 (% class="box infomessage" %)
789 (((
790 ~#~##check the miner version
791
792 draginoups
793 )))
794
795 [[image:image-20220609151419-3.png]]
796
797
798 (% class="box infomessage" %)
799 (((
800 ~#~##unblock the function of wireless
801 rfkill unblock wlan
802 uci set wireless.general.mode=ap
803 uci commit wireless
804 )))
805
806 [[image:image-20220609161204-1.png]]
807
808
809
810 = **9. How does the HP0D access to the network via a USB 4G Dongle** =
811
812 We have reserved enough space inside the HP0D to use a USB 4G Dongle,
813
814 so you can install a USB 4G Dongle in order for the hotspot to access the network via 4G.
815
816
817 //**Preparations:**//
818
819 //**1). A USB 4G Dongle, Such as HUAWEI E3327,ZTE...**//
820
821 //**2). A Sim card that can access the 4g network.**//
822
823 //**3). open the hotspot's shell.**//
824
825
826 == **9.1.  Open the HP0D shell and access the USB 4G Dongle into the Rpi.** ==
827
828 [[image:image-20220627153334-2.png]]
829
830
831 == **9.2. Checking the USB 4G Dongle network** ==
832
833 We have installed drivers for common USB 4G Dongle,
834
835 and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network
836
837
838 //HUAWEI-E3327//
839
840 [[image:image-20220627154526-9.png||height="762" width="725"]]
841
842
843 //ZTE//
844
845 [[image:image-20220627154201-5.png]]
846
847
848
849 = **10. PoE introduction** =
850
851
852 //The HP0D is use the **IEEE 802.3 af compliant PoE port** (input 44 ~~ 57 v, output 12V)//
853
854 //So you can use the PoE //switches// or PoE injector to power the device.//
855
856
857 **Note: The RJ45 Indicator light only represents the PoE power supply, **
858
859 **so when you use DC to power the hotspot and the RJ45 indicator light is off  ~-~--> this is normal**
860
861
862 **Wiring schematic:**
863
864 [[image:image-20220616143347-1.png]]
865
866
867
868
869 = **11. OTA Version Info** =
870
871 == **When does the OTA update happen?** ==
872
873
874 **//HP0D will check OTA update on a) Every Booting. b) Every Night. Below is the OTA update version info//**
875
876 == **# 2022/05/14** ==
877
878
879 1. //Update to the latest miner version: miner-arm64_2022.05.13.0_GA//
880 1. //Add postinst after auto-update//
881 1. //Add Miner version mark.//
882 1. //Add fast sync if miner GAP is large//
883
884 == **# 2022/05/18** ==
885
886
887 1. //Update minerup to speed up synchronized blocks//
888
889 == **# 2022/05/24** ==
890
891
892 1. //Update to the latest miner version: miner-arm64_2022.05.24.0_GA//
893
894 == **# 2022/05/31** ==
895
896 1. //Add WiFi STA icon display//
897 1. //Optimize AP icon display//
898 1. //Optimize home icon display//
899 1. //Fix for Miner icon URL bug//
900 1. //Add the secondary server configuration//
901
902 = **12. Supports** =
903
904 (((
905 **//If you are experiencing issues and can’t solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
906 )))
907
908 (((
909 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
910
911
912 )))
913
914 = **13. Order Info** =
915
916 (% style="color:#0000ff" %)**HP0D-XXX**
917
918 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
919
920 * **AS923**: LoRaWAN AS923 band
921 * **AU915**: LoRaWAN AU915 band
922 * **EU868**: LoRaWAN EU868 band
923 * **KR920**: LoRaWAN KR920 band
924 * **US915**: LoRaWAN US915 band
925 * **IN865**: LoRaWAN IN865 band
926
927 = **14. Manufacturer Info** =
928
929 (((
930 **Shenzhen Dragino Technology Development co. LTD**
931 )))
932
933 (((
934 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
935 )))
936
937 (((
938 Longcheng Street, LongGang District; Shenzhen 518116, China
939
940
941
942 )))
943
944 = **15. FCC Warning** =
945
946 (((
947 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
948 )))
949
950 (((
951 ~-~- Reorient or relocate the receiving antenna.
952 )))
953
954 (((
955 ~-~- Increase the separation between the equipment and receiver.
956 )))
957
958 (((
959 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
960 )))
961
962 (((
963 ~-~- Consult the dealer or an experienced radio/TV technician for help.
964 )))
965
966 (((
967 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
968 )))
969
970 (((
971 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
972 )))