Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 86.1 >
edited by Kilight Cao
on 2022/08/29 10:10
To version < 212.1 >
edited by Kilight Cao
on 2023/06/05 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,14 +59,16 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== **1.3 Features** ==
69 +== 1.3 Features ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,35 +81,35 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== **1.4 Block Diagram** ==
87 +== 1.4 Block Diagram ==
88 88  
89 89  
90 90  
91 -== **1.5 LED Indicators** ==
91 +== 1.5 LED Indicators ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
110 110  
111 111  
112 -== **1.6 Button Intruction** ==
112 +== 1.6 Button Intruction ==
113 113  
114 114  
115 115  LPS8-V2 has a black toggle button, which is:
... ... @@ -124,26 +124,40 @@
124 124  
125 125   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 -= **2. Quick Start** =
128 128  
128 += 2. Quick Start =
129 129  
130 +
130 130  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
131 131  
132 132  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
133 133  
134 134  
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
135 135  
136 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
138 +=== 2.1.1 connect the network ===
137 137  
138 138  
139 -== **2.1.1 connect the network.** ==
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
142 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
143 143  
146 + (% style="background-color:yellow" %)**dragino+dragino**
144 144  
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
145 145  (((
146 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
160 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 147  )))
148 148  
149 149  (((
... ... @@ -154,34 +154,43 @@
154 154  
155 155  
156 156  
157 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
158 158  
159 159  
160 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
174 +[[image:image-20230107084650-2.png||height="310" width="839"]]
161 161  
162 162  
163 -(((
164 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
165 -)))
177 +(% style="color:blue" %)**Steps to connect via fallback IP:**
166 166  
179 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
167 167  
181 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
168 168  
169 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
170 170  
171 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
184 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
172 172  
173 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
174 174  
187 +As in the below photo:
175 175  
176 -[[image:image-20220622101433-4.png]]
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
177 177  
178 178  
179 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
180 180  
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
181 181  
182 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
183 183  
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
184 184  
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
200 +
201 +
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
205 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
206 +
207 +
185 185  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
186 186  
187 187  
... ... @@ -195,16 +195,106 @@
195 195  [[image:image-20220622102847-7.png]]
196 196  
197 197  
198 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
221 +[[image:image-20220622102901-8.png||height="476" width="938"]]
199 199  
200 200  
224 +=== 2.1.2 Access Configure Web UI ===
201 201  
202 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
203 203  
227 +**Web Interface**
204 204  
205 -=== **2.2.1 Select your area frequency** ===
229 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
206 206  
207 207  
232 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
233 +
234 +You will see the login interface of LPS8-V2 as shown below.
235 +
236 +The account details for Web Login are:
237 +
238 +(% style="color:blue" %)**User Name: root**
239 +
240 +(% style="color:blue" %)**Password:   dragino**
241 +
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
243 +
244 +
245 +== 2.2  Typical Network Setup ==
246 +
247 +=== 2.2.1  Overview ===
248 +
249 +
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +=== 2.2.2  Use WAN port to access Internet ===
259 +
260 +
261 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 +
263 +
264 +[[image:image-20230411100633-2.png||height="501" width="935"]]
265 +
266 +
267 +=== 2.2.3  Access the Internet as a WiFi Client ===
268 +
269 +
270 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 +
272 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 +
274 +[[image:image-20230411095739-1.png||height="264" width="691"]]
275 +
276 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 +
278 +
279 +=== 2.2.4  Use built-in 4G modem for internet access ===
280 +
281 +
282 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 +
284 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 +
286 +
287 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 +
289 +First, install the Micro SIM card as below direction
290 +
291 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 +
293 +
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 +
296 +
297 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 +
299 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 +
301 +
302 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 +
304 +
305 +=== 2.2.5  Check Internet connection ===
306 +
307 +In the **home** page, we can check the Internet connection.
308 +
309 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
310 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
311 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
312 +
313 +[[image:image-20230411101534-3.png||height="544" width="942"]]
314 +
315 +
316 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
317 +
318 +=== 2.3.1 Select your area frequency ===
319 +
320 +
208 208  (((
209 209  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
210 210  
... ... @@ -211,17 +211,16 @@
211 211  
212 212  )))
213 213  
214 -[[image:image-20220622103332-9.png]]
327 +[[image:image-20220622103332-9.png||height="485" width="938"]]
215 215  
216 216  
330 +=== 2.3.2 Get the only gateway EUI ===
217 217  
218 -=== **2.2.2 Get the only gateway EUI** ===
219 219  
220 -
221 221  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
222 222  
223 223  
224 -[[image:image-20220622103355-10.png]]
336 +[[image:image-20220622103355-10.png||height="698" width="949"]]
225 225  
226 226  
227 227  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
... ... @@ -239,10 +239,9 @@
239 239  [[image:image-20220622103956-12.png]]
240 240  
241 241  
354 +=== 2.3.3 Register the gateway to The Things Network ===
242 242  
243 -== **2.2.3 Register the gateway to The Things Network** ==
244 244  
245 -
246 246  **Login to The Things Network**
247 247  
248 248  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -256,32 +256,30 @@
256 256  **Get it online**
257 257  
258 258  
370 += 3. Web Configure Pages =
259 259  
260 -= **3. Web Configure Pages** =
372 +== 3.1 Home ==
261 261  
262 262  
263 -== **3.1 Home** ==
375 +Shows the system running status:
264 264  
377 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
265 265  
266 -//Shows the system running status~://
267 267  
380 +== 3.2 LoRa Settings ==
268 268  
382 +=== 3.2.1 LoRa ~-~-> LoRa ===
269 269  
270 -== **3.2 LoRa Settings** ==
271 271  
385 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
272 272  
273 -=== **3.2.1 LoRa ~-~-> LoRa** ===
387 +Different LPS8v2 hardware versions can support different frequency ranges:
274 274  
389 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
390 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
275 275  
276 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
277 -
278 -//Different LPS8v2 hardware versions can support different frequency ranges~://
279 -
280 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
281 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
282 -
283 283  (% class="wikigeneratedid" %)
284 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
393 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
285 285  
286 286  
287 287  (% class="wikigeneratedid" %)
... ... @@ -289,87 +289,124 @@
289 289  
290 290  
291 291  (((
292 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
401 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
293 293  )))
294 294  
295 295  
405 +== 3.3 LoRaWAN Settings ==
296 296  
297 -== **3.3 LoRaWAN Settings** ==
407 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
298 298  
299 299  
300 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
410 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
301 301  
302 302  
303 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
304 -
305 -
306 306  [[image:image-20220616111932-2.png||height="516" width="672"]]
307 307  
308 308  
416 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
309 309  
310 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
311 311  
419 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
312 312  
313 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
314 314  
315 -
316 316  [[image:image-20220616113246-3.png||height="396" width="672"]]
317 317  
318 318  
319 319  (((
320 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
426 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
321 321  )))
322 322  
323 323  
430 +== 3.4 Network Settings ==
324 324  
325 -== **3.4 Network Settings** ==
432 +=== 3.4.1 Network ~-~-> WiFi ===
326 326  
327 327  
328 -=== **3.4.1 Network ~-~-> WiFi** ===
435 +[[image:image-20220616114756-4.png||height="251" width="669"]]
329 329  
330 330  
331 -[[image:image-20220616114756-4.png||height="251" width="669"]]
438 +=== 3.4.2 Network ~-~-> System Status ===
332 332  
333 333  
441 +[[image:image-20220820134112-2.png||height="539" width="668"]]
334 334  
335 -=== **3.4.2 Network ~-~-> System Status** ===
336 336  
444 +=== 3.4.3 Network ~-~-> Network ===
337 337  
338 -[[image:image-20220820134112-2.png||height="539" width="668"]]
339 339  
447 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
340 340  
449 +[[image:image-20230214093657-2.png||height="333" width="858"]]
341 341  
342 -=== **3.4.3 Network ~-~-> Firewall** ===
343 343  
452 +=== 3.4.4 Network ~-~-> Cellular ===
344 344  
345 -[[image:image-20220616115351-6.png||height="244" width="661"]]
346 346  
455 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
347 347  
457 +(% style="color:red" %)**Note: APN cannot be empty.**
348 348  
349 -== **3.5 System** ==
459 +[[image:image-20230228115126-1.png]]
350 350  
351 351  
352 -=== **3.5.1  System ~-~-> System Overview** ===
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
353 353  
464 +[[image:image-20230228115535-2.png||height="478" width="888"]]
354 354  
466 +
467 +== 3.5 System ==
468 +
469 +=== 3.5.1 System ~-~-> System Overview ===
470 +
471 +
355 355  Shows the system info:
356 356  
474 +[[image:image-20220917144512-5.png||height="618" width="853"]]
357 357  
358 358  
359 -=== **3.5.2 System ~-~-> Backup/Restore** ===
477 +=== 3.5.2 System ~-~-> System General ===
360 360  
361 361  
362 -[[image:image-20220616115808-7.png||height="194" width="649"]]
480 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
363 363  
482 +In addition, Users can customize the FallBack IP address.
364 364  
484 +[[image:image-20230214094058-3.png]]
365 365  
366 -= **4. Build-in Server** =
367 367  
487 +=== 3.5.3 System ~-~-> Backup/Restore ===
368 368  
489 +
490 +[[image:image-20220917144725-6.png||height="208" width="869"]]
491 +
492 +
493 +=== 3.5.4 System ~-~-> Remoteit ===
494 +
495 +
496 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
497 +
498 +
499 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
500 +
501 +[[image:image-20221230092303-2.png]]
502 +
503 +
504 +=== 3.5.5 System ~-~-> Package Management ===
505 +
506 +
507 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
508 +
509 +[[image:image-20230214094316-4.png]]
510 +
511 +
512 += 4. Build-in Server =
513 +
514 +
369 369  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
370 370  
371 371  
372 -[[image:image-20220820115644-1.png]]
518 +[[image:image-20230214095318-5.png||height="347" width="980"]]
373 373  
374 374  
375 375  (% style="color:red" %)**Note:**
... ... @@ -387,12 +387,11 @@
387 387   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
388 388  
389 389  
536 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
390 390  
391 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
392 392  
539 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
393 393  
394 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
395 -
396 396  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
397 397  
398 398  
... ... @@ -406,43 +406,138 @@
406 406  [[image:image-20220725171719-1.png||height="570" width="769"]]
407 407  
408 408  
554 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
409 409  
410 -== **4.2. Application Server ~-~- Node-Red** ==
411 411  
557 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
412 412  
413 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
559 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
414 414  
561 +[[image:image-20230321092456-1.png]]
415 415  
416 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
417 417  
564 +== 4.2 Application Server ~-~- Node-Red ==
418 418  
566 +
567 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 +
569 +
570 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
571 +
572 +
419 419  [[image:image-20220725172124-3.png||height="610" width="843"]]
420 420  
421 421  
422 422  
423 -= **6. How users can access LPS8v2 using serial USB** =
577 +=== **Using Node-Red, InfluxDB and Grafana** ===
424 424  
579 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
425 425  
426 -**USB TTL to LPS8v2  Connection:**
427 427  
428 -Port 1 of the UART on the LPS8v2 is GND
582 +the users can refer to this link to install them.
429 429  
584 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 +
586 +
587 +=== **Upgrade the node.js** ===
588 +
589 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
590 +
591 +
592 +the users can refer to this link to upgrade them.
593 +
594 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
595 +
596 +
597 +== 4.3 How to disable the built-in server ==
598 +
599 +
600 +Use the following commands to start and stop the TTNv3 service:
601 +
430 430  (% class="box infomessage" %)
431 431  (((
432 -TXD  <~-~--> UART RXD (Gray line)
604 +**# start**
605 +systemctl start ttnstack
433 433  
434 -RXD  <~-~--> UART TXD (White line)
607 +**# stop**
608 +systemctl stop ttnstack
435 435  
436 -GND <~-~--> GND (Black line)
610 +**# enable**
611 +systemctl enable ttnstack
612 +
613 +**#disable**
614 +systemctl disable ttnstack
437 437  )))
438 438  
617 +Use the following commands to start and stop the Node-Red service:
439 439  
440 -**LPS8v2 UART connection photo**
619 +(% class="box infomessage" %)
620 +(((
621 +**# start**
622 +systemctl start nodered
441 441  
442 -[[image:image-20220804163015-1.png||height="621" width="466"]]
624 +**# stop**
625 +systemctl stop nodered
443 443  
627 +**# enable**
628 +systemctl enable nodered
444 444  
630 +**#disable**
631 +systemctl disable nodered
632 +)))
445 445  
634 +
635 +== 4.4 How to use ChirpStack on LPS8-V2 ==
636 +
637 +
638 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
639 +
640 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
641 +
642 +
643 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
644 +
645 +
646 +On the Server ~-~-> Network Server interface, choose the frequency Plan first.
647 +
648 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
649 +
650 +[[image:image-20230602140406-3.png||height="480" width="918"]]
651 +
652 +
653 +When the configuration is complete, click "Save&Apply".
654 +
655 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
656 +
657 +[[image:image-20230602143122-4.png||height="511" width="983"]]
658 +
659 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
660 +
661 +
662 +
663 += 6. How users can access LPS8-V2 using serial USB =
664 +
665 +
666 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
667 +
668 +
669 +Port 1 of the UART on the LPS8-V2 is GND
670 +
671 +(% class="box infomessage" %)
672 +(((
673 +**TXD  <~-~--> UART RXD (Gray line)**
674 +
675 +**RXD  <~-~--> UART TXD (White line)**
676 +
677 +**GND <~-~--> GND (Black line)**
678 +)))
679 +
680 +
681 +**LPS8v2 UART connection photo**
682 +
683 +
684 +[[image:image-20230421094319-2.png||height="351" width="392"]]
685 +
446 446  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
447 447  
448 448  
... ... @@ -452,22 +452,228 @@
452 452  [[image:image-20220804164747-2.png||height="622" width="594"]]
453 453  
454 454  
695 += 7. Use the helium gateway-rs as the Data-only Hotspot =
455 455  
456 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
457 457  
698 +== **Step 1: Configure Frequency Band** ==
458 458  
700 +
701 +//Each country has a requirement for frequency region. Choose the right one for your area.//
702 +
703 +[[image:image-20220905164308-1.png]]
704 +
705 +
706 +
707 +== **Step 2: Configure the forward address** ==
708 +
709 +
710 +**Select one of the servers to configure.**
711 +
712 +**For example:**
713 +
714 +[[image:image-20220905164847-2.png]]
715 +
716 +
717 +
718 +== **Step 3: Download and Install the Helium-gateway-rs** ==
719 +
720 +
721 +**Access the gateway CLI via SSH.**
722 +
723 +[[image:image-20230425153417-2.png]]
724 +
725 +
726 +**Install the new gateway-rs**
727 +
728 +(% class="box infomessage" %)
459 459  (((
460 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
730 +**apt update && apt install helium-gateway**
461 461  )))
462 462  
733 +[[image:image-20230425154058-4.png]]
734 +
735 +
736 +
737 +Option: If you installed the older gateway-rs, you have clean it
738 +
739 +(% class="box infomessage" %)
463 463  (((
464 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
741 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
742 +)))
465 465  
744 +[[image:image-20230425153823-3.png]]
466 466  
467 467  
468 -= **11 Reference** =
747 +**Change the region setting:**
469 469  
470 470  
750 +(% class="box infomessage" %)
751 +(((
752 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
753 +
754 +
755 +**e.g: **
756 +
757 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
758 +
759 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
760 +)))
761 +
762 +
763 +**Restart the gateway-rs**
764 +
765 +(% class="box infomessage" %)
766 +(((
767 +**systemctl restart helium_gateway**
768 +)))
769 +
770 +[[image:image-20230425155612-7.png||height="265" width="911"]]
771 +
772 +
773 +
774 +**Check the helium_gateway running status**
775 +
776 +
777 +(% class="box infomessage" %)
778 +(((
779 +**systemctl status helium_gateway**
780 +)))
781 +
782 +
783 +[[image:image-20230425154740-5.png]]
784 +
785 +
786 +
787 +**Check the helium_gateway Log：**
788 +
789 +(% class="box infomessage" %)
790 +(((
791 +**journalctl -u helium_gateway -f**
792 +)))
793 +
794 +
795 +[[image:image-20230425155659-8.png]]
796 +
797 +
798 += 8. OTA System Update =
799 +
800 +
801 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
802 +
803 +
804 += 9. FAQ =
805 +
806 +== 9.1 How to change Hostname ==
807 +
808 +
809 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
810 +
811 +(% class="box infomessage" %)
812 +(((
813 +hostnamectl set-hostname dragino-123456
814 +)))
815 +
816 +[[image:image-20230517102429-1.png]]
817 +
818 +After the configuration is complete, run "reboot" to restart the gateway.
819 +
820 +
821 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
822 +
823 +
824 +Migrate guide:
825 +
826 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
827 +
828 +2. Download migrate script and run it.
829 +
830 +(% class="box infomessage" %)
831 +(((
832 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
833 +)))
834 +
835 +[[image:image-20230602135658-1.png||height="545" width="986"]]
836 +
837 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
838 +
839 +[[image:image-20230602135825-2.png||height="356" width="855"]]
840 +
841 +The default account for chirpstack is: **admin/admin**
842 +
843 +
844 += 10. Trouble Shooting =
845 +
846 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
847 +
848 +
849 +[[image:image-20220920135918-1.png]]
850 +
851 +
852 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
853 +
854 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
855 +
856 +
857 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
858 +
859 +**Click the update URL button to configure the URL with the current eth port address.**
860 +
861 +[[image:image-20220920141936-2.png]]
862 +
863 +
864 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
865 +
866 +
867 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
868 +
869 +[[image:image-20230508171607-1.png]]
870 +
871 +
872 +== 10.3  Fallback IP does not work, how can users check ==
873 +
874 +
875 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
876 +
877 +
878 +**1.Check whether the configuration is correct**
879 +
880 +Run the CMD command to ipconfig and ping 172.31.255.254.
881 +
882 +If this fails, the user needs to reconfigure.
883 +
884 +[[image:image-20230413170224-3.png||height="433" width="707"]]
885 +
886 +[[image:image-20230413170246-4.png]]
887 +
888 +
889 +**2. Check whether the firewall is disabled**
890 +
891 +If the firewall is not down, this will affect access to the gateway.
892 +
893 +
894 +== 10.4  Click "Manual_Update", why there is no response? ==
895 +
896 +
897 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
898 +
899 +
900 +[[image:image-20230527090555-3.png||height="660" width="832"]]
901 +
902 +
903 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
904 +
905 +
906 +(((
907 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
908 +)))
909 +
910 +(((
911 +With your question as detailed as possible. We will reply and help you in the shortest.
912 +
913 +
914 += 12. Reference =
915 +
916 +
471 471  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
472 472  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
473 473  
... ... @@ -474,7 +474,7 @@
474 474  
475 475  )))
476 476  
477 -= **12. Order Info** =
923 += 13. Order Info =
478 478  
479 479  
480 480  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -498,10 +498,9 @@
498 498  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
499 499  
500 500  
947 += 14. Manufacturer Info =
501 501  
502 -= **13. Manufacturer Info** =
503 503  
504 -
505 505  **Shenzhen Dragino Technology Development co. LTD**
506 506  
507 507  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -509,10 +509,9 @@
509 509  LongCheng Street, LongGang District ; Shenzhen 518116,China
510 510  
511 511  
957 += 15. FCC Warning =
512 512  
513 -= **14. FCC Warning** =
514 514  
515 -
516 516  (((
517 517  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
518 518  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0