Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 83.2 >
edited by Xiaoling
on 2022/08/23 09:16
To version < 117.2 >
edited by Xiaoling
on 2022/12/28 16:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,12 +16,11 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 27  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -44,10 +44,9 @@
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -68,10 +68,9 @@
68 68  
69 69  
70 70  
69 +== 1.3 Features ==
71 71  
72 -== **1.3 Features** ==
73 73  
74 -
75 75  * Open Source Debian system
76 76  * Managed by Web GUI, SSH via WAN or WiFi
77 77  * Remote Management
... ... @@ -87,47 +87,62 @@
87 87  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
88 88  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
89 89  
90 -== **1.4 Block Diagram** ==
91 91  
92 92  
89 +== 1.4 Block Diagram ==
93 93  
94 -== **1.5 LED Indicators** ==
95 95  
96 96  
93 +== 1.5 LED Indicators ==
94 +
95 +
97 97  LPS8-V2 has totally four LEDs, They are:
98 98  
99 99  
100 100  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
101 101  
102 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
103 103  
104 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
105 105  
106 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
107 107  
108 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
109 109  
110 110  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 111  
112 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 113  
114 114  
114 +== 1.6 Button Intruction ==
115 115  
116 -= **2. Quick Start** =
117 117  
117 +LPS8-V2 has a black toggle button, which is:
118 118  
119 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
120 120  
121 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
122 122  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 123  
124 124  
125 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 126  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
127 127  
128 -== **2.1.1 connect the network.** ==
129 129  
130 += 2. Quick Start =
130 130  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
131 131  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
132 132  
133 133  
... ... @@ -149,27 +149,6 @@
149 149  [[image:image-20220622100542-2.png||height="369" width="1256"]]
150 150  
151 151  
152 -(((
153 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
154 -)))
155 -
156 -
157 -
158 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
159 -
160 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
161 -
162 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
163 -
164 -[[image:image-20220622101433-4.png]]
165 -
166 -
167 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
168 -
169 -
170 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
171 -
172 -
173 173  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
174 174  
175 175  
... ... @@ -183,32 +183,32 @@
183 183  [[image:image-20220622102847-7.png]]
184 184  
185 185  
186 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
187 187  
188 188  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
189 189  
190 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
191 191  
192 192  
193 -=== **2.2.1 Select your area frequency** ===
194 -
195 -
196 196  (((
197 197  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 +
188 +
198 198  )))
199 199  
200 -[[image:image-20220622103332-9.png]]
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
201 201  
202 202  
194 +=== 2.2.2 Get the only gateway EUI ===
203 203  
204 -=== **2.2.2 Get the only gateway EUI** ===
205 205  
206 -
207 207  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
208 208  
209 -[[image:image-20220622103355-10.png]]
210 210  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
211 211  
202 +
212 212  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
213 213  
214 214  
... ... @@ -224,7 +224,6 @@
224 224  [[image:image-20220622103956-12.png]]
225 225  
226 226  
227 -
228 228  == 2.2.3 Register the gateway to The Things Network ==
229 229  
230 230  
... ... @@ -241,20 +241,19 @@
241 241  **Get it online**
242 242  
243 243  
234 += 3. Web Configure Pages =
244 244  
245 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
246 246  
247 247  
248 -== **3.1 Home** ==
249 -
250 -
251 251  //Shows the system running status~://
252 252  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
253 253  
254 -== **3.2 LoRa Settings** ==
255 255  
244 +== 3.2 LoRa Settings ==
256 256  
257 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
258 258  
259 259  
260 260  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -267,92 +267,88 @@
267 267  (% class="wikigeneratedid" %)
268 268  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
269 269  
259 +
270 270  (% class="wikigeneratedid" %)
271 271  [[image:image-20220616110739-1.png||height="372" width="682"]]
272 272  
273 273  
274 274  (((
275 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
276 276  )))
277 277  
278 278  
269 +== 3.3 LoRaWAN Settings ==
279 279  
280 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
281 281  
282 282  
283 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
284 -
285 -
286 286  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 287  
276 +
288 288  [[image:image-20220616111932-2.png||height="516" width="672"]]
289 289  
290 290  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
291 291  
292 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
293 293  
294 -
295 295  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
296 296  
285 +
297 297  [[image:image-20220616113246-3.png||height="396" width="672"]]
298 298  
299 299  
300 300  (((
301 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
302 302  )))
303 303  
304 304  
294 +== 3.4 Network Settings ==
305 305  
306 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
307 307  
308 308  
309 -=== **3.4.1 Network ~-~-> WiFi** ===
310 -
311 -
312 312  [[image:image-20220616114756-4.png||height="251" width="669"]]
313 313  
314 314  
302 +=== 3.4.2 Network ~-~-> System Status ===
315 315  
316 -=== **3.4.2 Network ~-~-> System Status** ===
317 317  
318 -
319 319  [[image:image-20220820134112-2.png||height="539" width="668"]]
320 320  
321 321  
308 +=== 3.4.3 Network ~-~-> Firewall ===
322 322  
323 -=== **3.4.3 Network ~-~-> Firewall** ===
324 324  
325 -
326 326  [[image:image-20220616115351-6.png||height="244" width="661"]]
327 327  
328 328  
314 +== 3.5 System ==
329 329  
330 -== **3.5 System** ==
316 +=== 3.5.1  System ~-~-> System Overview ===
331 331  
332 332  
333 -=== **3.5.1  System ~-~-> System Overview** ===
334 -
335 -
336 336  Shows the system info:
337 337  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
338 338  
339 339  
340 -=== **3.5.2 System ~-~-> Backup/Restore** ===
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
341 341  
342 342  
343 -[[image:image-20220616115808-7.png||height="194" width="649"]]
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
344 344  
345 345  
330 += 4. Build-in Server =
346 346  
347 -= **4. Build-in Server** =
348 348  
349 349  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
350 350  
351 -[[image:image-20220820115644-1.png]]
352 352  
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
353 353  
354 -Note:
355 355  
339 +(% style="color:red" %)**Note:**
340 +
356 356   **Path**: System ~-~-> Built-in Server
357 357  
358 358  
... ... @@ -361,15 +361,16 @@
361 361  
362 362  **~ 1. URL does not jump properly**
363 363  
364 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hotsname to the current local IP address as the URL.
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
365 365  
366 - For the Node-Red, you can use the local IP address and the port is 18880 to access it.
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
367 367  
368 368  
369 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
370 370  
371 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
372 372  
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
373 373  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
374 374  
375 375  
... ... @@ -383,34 +383,44 @@
383 383  [[image:image-20220725171719-1.png||height="570" width="769"]]
384 384  
385 385  
372 +== 4.2 Application Server ~-~- Node-Red ==
386 386  
387 -== **4.2. Application Server ~-~- Node-Red** ==
388 388  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
389 389  
390 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
391 391  
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
392 392  
393 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
394 394  
395 -
396 396  [[image:image-20220725172124-3.png||height="610" width="843"]]
397 397  
398 398  
399 399  
400 -= **6. How users can access LPS8v2 using serial USB** =
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
401 401  
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
402 402  
403 -**USB TTL to LPS8v2  Connection:**
404 404  
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
405 405  Port 1 of the UART on the LPS8v2 is GND
406 406  
407 407  (% class="box infomessage" %)
408 408  (((
409 -TXD  <~-~--> UART RXD (Gray line)
405 +**TXD  <~-~--> UART RXD (Gray line)**
410 410  
411 -RXD  <~-~--> UART TXD (White line)
407 +**RXD  <~-~--> UART TXD (White line)**
412 412  
413 -GND <~-~--> GND (Black line)
409 +**GND <~-~--> GND (Black line)**
414 414  )))
415 415  
416 416  
... ... @@ -422,14 +422,140 @@
422 422  
423 423  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
424 424  
421 +
425 425  [[image:image-20220804164928-3.png||height="320" width="332"]]
426 426  
424 +
427 427  [[image:image-20220804164747-2.png||height="622" width="594"]]
428 428  
429 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
430 430  
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
431 431  
430 +
431 +== **Step 1: Configure Frequency Band** ==
432 +
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
463 +(% class="box infomessage" %)
432 432  (((
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
466 +)))
467 +
468 +
469 +**Install gateway-rs.**
470 +
471 +[[image:image-20220905165917-7.png]]
472 +
473 +(% class="box infomessage" %)
474 +(((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
477 +
478 +
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
486 +(((
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
490 +)))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
501 +)))
502 +
503 +
504 +**Check the helium_gateway Log：**
505 +
506 +[[image:image-20220905173952-13.png]]
507 +
508 +
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
513 +
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
554 +(((
433 433  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
434 434  )))
435 435  
... ... @@ -437,17 +437,17 @@
437 437  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
438 438  
439 439  
562 += 10. Reference =
440 440  
441 -= **11 Reference** =
442 442  
443 -
444 444  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
445 445  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
446 446  
568 +
447 447  
448 448  )))
449 449  
450 -= **12. Order Info** =
572 += 11. Order Info =
451 451  
452 452  
453 453  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -471,10 +471,9 @@
471 471  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
472 472  
473 473  
596 += 12. Manufacturer Info =
474 474  
475 -= **13. Manufacturer Info** =
476 476  
477 -
478 478  **Shenzhen Dragino Technology Development co. LTD**
479 479  
480 480  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -482,10 +482,9 @@
482 482  LongCheng Street, LongGang District ; Shenzhen 518116,China
483 483  
484 484  
606 += 13. FCC Warning =
485 485  
486 -= **14. FCC Warning** =
487 487  
488 -
489 489  (((
490 490  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
491 491  )))
... ... @@ -514,5 +514,7 @@
514 514  
515 515  (((
516 516  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
517 517  )))
518 518  )))
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0