Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 83.1 >
edited by Xiaoye
on 2022/08/20 13:42
To version < 117.2 >
edited by Xiaoling
on 2022/12/28 16:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -62,9 +62,11 @@
62 62  * Storage Temperature: -20 ~~ 65°C
63 63  * Power Input: 5V, 2A, DC
64 64  
65 -== **1.3 Features** ==
66 66  
67 67  
69 +== 1.3 Features ==
70 +
71 +
68 68  * Open Source Debian system
69 69  * Managed by Web GUI, SSH via WAN or WiFi
70 70  * Remote Management
... ... @@ -80,47 +80,62 @@
80 80  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
81 81  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
82 82  
83 -== **1.4 Block Diagram** ==
84 84  
85 85  
89 +== 1.4 Block Diagram ==
86 86  
87 -== **1.5 LED Indicators** ==
88 88  
89 89  
93 +== 1.5 LED Indicators ==
94 +
95 +
90 90  LPS8-V2 has totally four LEDs, They are:
91 91  
92 92  
93 93  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
94 94  
95 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
96 96  
97 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
98 98  
99 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
100 100  
101 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
102 102  
103 103  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
104 104  
105 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
106 106  
107 107  
114 +== 1.6 Button Intruction ==
108 108  
109 -= **2. Quick Start** =
110 110  
117 +LPS8-V2 has a black toggle button, which is:
111 111  
112 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
113 113  
114 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 116  
117 117  
118 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 119  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
120 120  
121 -== **2.1.1 connect the network.** ==
122 122  
130 += 2. Quick Start =
123 123  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
124 124  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
125 125  
126 126  
... ... @@ -142,27 +142,6 @@
142 142  [[image:image-20220622100542-2.png||height="369" width="1256"]]
143 143  
144 144  
145 -(((
146 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 -)))
148 -
149 -
150 -
151 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
152 -
153 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
154 -
155 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
156 -
157 -[[image:image-20220622101433-4.png]]
158 -
159 -
160 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
161 -
162 -
163 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
164 -
165 -
166 166  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
167 167  
168 168  
... ... @@ -176,32 +176,32 @@
176 176  [[image:image-20220622102847-7.png]]
177 177  
178 178  
179 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
180 180  
181 181  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
182 182  
183 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
184 184  
185 185  
186 -=== **2.2.1 Select your area frequency** ===
187 -
188 -
189 189  (((
190 190  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 +
188 +
191 191  )))
192 192  
193 -[[image:image-20220622103332-9.png]]
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
194 194  
195 195  
194 +=== 2.2.2 Get the only gateway EUI ===
196 196  
197 -=== **2.2.2 Get the only gateway EUI** ===
198 198  
199 -
200 200  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
201 201  
202 -[[image:image-20220622103355-10.png]]
203 203  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
204 204  
202 +
205 205  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
206 206  
207 207  
... ... @@ -217,7 +217,6 @@
217 217  [[image:image-20220622103956-12.png]]
218 218  
219 219  
220 -
221 221  == 2.2.3 Register the gateway to The Things Network ==
222 222  
223 223  
... ... @@ -234,20 +234,19 @@
234 234  **Get it online**
235 235  
236 236  
234 += 3. Web Configure Pages =
237 237  
238 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
239 239  
240 240  
241 -== **3.1 Home** ==
242 -
243 -
244 244  //Shows the system running status~://
245 245  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
246 246  
247 -== **3.2 LoRa Settings** ==
248 248  
244 +== 3.2 LoRa Settings ==
249 249  
250 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
251 251  
252 252  
253 253  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -260,92 +260,88 @@
260 260  (% class="wikigeneratedid" %)
261 261  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
262 262  
259 +
263 263  (% class="wikigeneratedid" %)
264 264  [[image:image-20220616110739-1.png||height="372" width="682"]]
265 265  
266 266  
267 267  (((
268 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
269 269  )))
270 270  
271 271  
269 +== 3.3 LoRaWAN Settings ==
272 272  
273 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
274 274  
275 275  
276 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
277 -
278 -
279 279  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 280  
276 +
281 281  [[image:image-20220616111932-2.png||height="516" width="672"]]
282 282  
283 283  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
284 284  
285 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
286 286  
287 -
288 288  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
289 289  
285 +
290 290  [[image:image-20220616113246-3.png||height="396" width="672"]]
291 291  
292 292  
293 293  (((
294 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
295 295  )))
296 296  
297 297  
294 +== 3.4 Network Settings ==
298 298  
299 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
300 300  
301 301  
302 -=== **3.4.1 Network ~-~-> WiFi** ===
303 -
304 -
305 305  [[image:image-20220616114756-4.png||height="251" width="669"]]
306 306  
307 307  
302 +=== 3.4.2 Network ~-~-> System Status ===
308 308  
309 -=== **3.4.2 Network ~-~-> System Status** ===
310 310  
311 -
312 312  [[image:image-20220820134112-2.png||height="539" width="668"]]
313 313  
314 314  
308 +=== 3.4.3 Network ~-~-> Firewall ===
315 315  
316 -=== **3.4.3 Network ~-~-> Firewall** ===
317 317  
318 -
319 319  [[image:image-20220616115351-6.png||height="244" width="661"]]
320 320  
321 321  
314 +== 3.5 System ==
322 322  
323 -== **3.5 System** ==
316 +=== 3.5.1  System ~-~-> System Overview ===
324 324  
325 325  
326 -=== **3.5.1  System ~-~-> System Overview** ===
327 -
328 -
329 329  Shows the system info:
330 330  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
331 331  
332 332  
333 -=== **3.5.2 System ~-~-> Backup/Restore** ===
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
334 334  
335 335  
336 -[[image:image-20220616115808-7.png||height="194" width="649"]]
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
337 337  
338 338  
330 += 4. Build-in Server =
339 339  
340 -= **4. Build-in Server** =
341 341  
342 342  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
343 343  
344 -[[image:image-20220820115644-1.png]]
345 345  
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
346 346  
347 -Note:
348 348  
339 +(% style="color:red" %)**Note:**
340 +
349 349   **Path**: System ~-~-> Built-in Server
350 350  
351 351  
... ... @@ -354,16 +354,16 @@
354 354  
355 355  **~ 1. URL does not jump properly**
356 356  
357 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hotsname to the current local IP address as the URL.
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
358 358  
359 - For the Node-Red, you can use the local IP address and the port is 18880 to access it.
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
360 360  
361 361  
362 -(% class="wikigeneratedid" %)
363 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
364 364  
365 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
366 366  
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
367 367  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
368 368  
369 369  
... ... @@ -377,34 +377,44 @@
377 377  [[image:image-20220725171719-1.png||height="570" width="769"]]
378 378  
379 379  
372 +== 4.2 Application Server ~-~- Node-Red ==
380 380  
381 -== **4.2. Application Server ~-~- Node-Red** ==
382 382  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
383 383  
384 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
385 385  
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
386 386  
387 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
388 388  
389 -
390 390  [[image:image-20220725172124-3.png||height="610" width="843"]]
391 391  
392 392  
393 393  
394 -= **6. How users can access LPS8v2 using serial USB** =
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
395 395  
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
396 396  
397 -**USB TTL to LPS8v2  Connection:**
398 398  
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
399 399  Port 1 of the UART on the LPS8v2 is GND
400 400  
401 401  (% class="box infomessage" %)
402 402  (((
403 -TXD  <~-~--> UART RXD (Gray line)
405 +**TXD  <~-~--> UART RXD (Gray line)**
404 404  
405 -RXD  <~-~--> UART TXD (White line)
407 +**RXD  <~-~--> UART TXD (White line)**
406 406  
407 -GND <~-~--> GND (Black line)
409 +**GND <~-~--> GND (Black line)**
408 408  )))
409 409  
410 410  
... ... @@ -416,14 +416,140 @@
416 416  
417 417  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
418 418  
421 +
419 419  [[image:image-20220804164928-3.png||height="320" width="332"]]
420 420  
424 +
421 421  [[image:image-20220804164747-2.png||height="622" width="594"]]
422 422  
423 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
424 424  
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
425 425  
430 +
431 +== **Step 1: Configure Frequency Band** ==
432 +
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
463 +(% class="box infomessage" %)
426 426  (((
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
466 +)))
467 +
468 +
469 +**Install gateway-rs.**
470 +
471 +[[image:image-20220905165917-7.png]]
472 +
473 +(% class="box infomessage" %)
474 +(((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
477 +
478 +
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
486 +(((
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
490 +)))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
501 +)))
502 +
503 +
504 +**Check the helium_gateway Log：**
505 +
506 +[[image:image-20220905173952-13.png]]
507 +
508 +
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
513 +
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
554 +(((
427 427  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
428 428  )))
429 429  
... ... @@ -431,17 +431,17 @@
431 431  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
432 432  
433 433  
562 += 10. Reference =
434 434  
435 -= **11 Reference** =
436 436  
437 -
438 438  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
439 439  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
440 440  
568 +
441 441  
442 442  )))
443 443  
444 -= **12. Order Info** =
572 += 11. Order Info =
445 445  
446 446  
447 447  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -465,10 +465,9 @@
465 465  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
466 466  
467 467  
596 += 12. Manufacturer Info =
468 468  
469 -= **13. Manufacturer Info** =
470 470  
471 -
472 472  **Shenzhen Dragino Technology Development co. LTD**
473 473  
474 474  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -476,10 +476,9 @@
476 476  LongCheng Street, LongGang District ; Shenzhen 518116,China
477 477  
478 478  
606 += 13. FCC Warning =
479 479  
480 -= **14. FCC Warning** =
481 481  
482 -
483 483  (((
484 484  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
485 485  )))
... ... @@ -508,5 +508,7 @@
508 508  
509 509  (((
510 510  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
511 511  )))
512 512  )))
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0