Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 71.1 >
edited by Xiaoye
on 2022/08/02 11:05
To version < 117.2 >
edited by Xiaoling
on 2022/12/28 16:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -63,9 +63,10 @@
63 63  * Power Input: 5V, 2A, DC
64 64  
65 65  
66 -== **1.3 Features** ==
67 67  
69 +== 1.3 Features ==
68 68  
71 +
69 69  * Open Source Debian system
70 70  * Managed by Web GUI, SSH via WAN or WiFi
71 71  * Remote Management
... ... @@ -82,47 +82,61 @@
82 82  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
83 83  
84 84  
85 -== **1.4 Block Diagram** ==
86 86  
89 +== 1.4 Block Diagram ==
87 87  
88 88  
89 -== **1.5 LED Indicators** ==
90 90  
93 +== 1.5 LED Indicators ==
91 91  
95 +
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 95  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
96 96  
97 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
100 100  
101 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
102 102  
103 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
104 104  
105 105  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
106 106  
107 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
108 108  
109 109  
114 +== 1.6 Button Intruction ==
110 110  
111 -= **2. Quick Start** =
112 112  
117 +LPS8-V2 has a black toggle button, which is:
113 113  
114 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
115 115  
116 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
118 118  
119 119  
120 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
121 121  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
122 122  
123 -== **2.1.1 connect the network.** ==
124 124  
130 += 2. Quick Start =
125 125  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
126 126  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
127 127  
128 128  
... ... @@ -144,27 +144,6 @@
144 144  [[image:image-20220622100542-2.png||height="369" width="1256"]]
145 145  
146 146  
147 -(((
148 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
149 -)))
150 -
151 -
152 -
153 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
154 -
155 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
156 -
157 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
158 -
159 -[[image:image-20220622101433-4.png]]
160 -
161 -
162 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
163 -
164 -
165 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
166 -
167 -
168 168  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
169 169  
170 170  
... ... @@ -178,32 +178,32 @@
178 178  [[image:image-20220622102847-7.png]]
179 179  
180 180  
181 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
182 182  
183 183  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
184 184  
185 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
186 186  
187 187  
188 -=== **2.2.1 Select your area frequency** ===
189 -
190 -
191 191  (((
192 192  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 +
188 +
193 193  )))
194 194  
195 -[[image:image-20220622103332-9.png]]
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
196 196  
197 197  
194 +=== 2.2.2 Get the only gateway EUI ===
198 198  
199 -=== **2.2.2 Get the only gateway EUI** ===
200 200  
201 -
202 202  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
203 203  
204 -[[image:image-20220622103355-10.png]]
205 205  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
206 206  
202 +
207 207  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
208 208  
209 209  
... ... @@ -219,7 +219,6 @@
219 219  [[image:image-20220622103956-12.png]]
220 220  
221 221  
222 -
223 223  == 2.2.3 Register the gateway to The Things Network ==
224 224  
225 225  
... ... @@ -236,20 +236,19 @@
236 236  **Get it online**
237 237  
238 238  
234 += 3. Web Configure Pages =
239 239  
240 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
241 241  
242 242  
243 -== **3.1 Home** ==
244 -
245 -
246 246  //Shows the system running status~://
247 247  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
248 248  
249 -== **3.2 LoRa Settings** ==
250 250  
244 +== 3.2 LoRa Settings ==
251 251  
252 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
253 253  
254 254  
255 255  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -256,97 +256,112 @@
256 256  
257 257  //Different LPS8v2 hardware versions can support different frequency ranges~://
258 258  
259 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
253 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
260 260  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
261 261  
262 262  (% class="wikigeneratedid" %)
263 263  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
264 264  
259 +
265 265  (% class="wikigeneratedid" %)
266 266  [[image:image-20220616110739-1.png||height="372" width="682"]]
267 267  
268 268  
269 269  (((
270 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
271 271  )))
272 272  
273 273  
269 +== 3.3 LoRaWAN Settings ==
274 274  
275 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
276 276  
277 277  
278 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
279 -
280 -
281 281  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
282 282  
276 +
283 283  [[image:image-20220616111932-2.png||height="516" width="672"]]
284 284  
285 285  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
286 286  
287 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
288 288  
289 -
290 290  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
291 291  
285 +
292 292  [[image:image-20220616113246-3.png||height="396" width="672"]]
293 293  
294 294  
295 295  (((
296 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
297 297  )))
298 298  
299 299  
294 +== 3.4 Network Settings ==
300 300  
301 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
302 302  
303 303  
304 -=== **3.4.1 Network ~-~-> WiFi** ===
299 +[[image:image-20220616114756-4.png||height="251" width="669"]]
305 305  
306 306  
307 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== 3.4.2 Network ~-~-> System Status ===
308 308  
309 309  
305 +[[image:image-20220820134112-2.png||height="539" width="668"]]
310 310  
311 -=== **3.4.2 Network ~-~-> System Status** ===
312 312  
308 +=== 3.4.3 Network ~-~-> Firewall ===
313 313  
314 -[[image:image-20220616115229-5.png||height="548" width="665"]]
315 315  
311 +[[image:image-20220616115351-6.png||height="244" width="661"]]
316 316  
317 317  
318 -=== **3.4.3 Network ~-~-> Firewall** ===
314 +== 3.5 System ==
319 319  
316 +=== 3.5.1  System ~-~-> System Overview ===
320 320  
321 -[[image:image-20220616115351-6.png||height="244" width="661"]]
322 322  
319 +Shows the system info:
323 323  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
324 324  
325 -== **3.5 System** ==
326 326  
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
327 327  
328 -=== **3.5.1  System ~-~-> System Overview** ===
329 329  
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
330 330  
331 -Shows the system info:
332 332  
330 += 4. Build-in Server =
333 333  
334 334  
335 -=== **3.5.2 System ~-~-> Backup/Restore** ===
333 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
336 336  
337 337  
338 -[[image:image-20220616115808-7.png||height="194" width="649"]]
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
339 339  
340 340  
339 +(% style="color:red" %)**Note:**
341 341  
342 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
341 + **Path**: System ~-~-> Built-in Server
343 343  
344 344  
345 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
344 +**Troubleshooting:**
346 346  
347 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
348 348  
347 +**~ 1. URL does not jump properly**
349 349  
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
350 +
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
352 +
353 +
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
355 +
356 +
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
350 350  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
351 351  
352 352  
... ... @@ -360,58 +360,188 @@
360 360  [[image:image-20220725171719-1.png||height="570" width="769"]]
361 361  
362 362  
363 -(((
364 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
365 - You can complete the installation manually with the following command.**
366 -)))
372 +== 4.2 Application Server ~-~- Node-Red ==
367 367  
368 368  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
376 +
377 +
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
379 +
380 +
381 +[[image:image-20220725172124-3.png||height="610" width="843"]]
382 +
383 +
384 +
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
386 +
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
388 +
389 +
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
401 +Port 1 of the UART on the LPS8v2 is GND
402 +
369 369  (% class="box infomessage" %)
370 370  (((
371 -(((
372 -(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
373 -chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
405 +**TXD  <~-~--> UART RXD (Gray line)**
406 +
407 +**RXD  <~-~--> UART TXD (White line)**
408 +
409 +**GND <~-~--> GND (Black line)**
374 374  )))
375 -)))
376 376  
377 377  
413 +**LPS8v2 UART connection photo**
378 378  
379 -= **5. Build-in Application Server ~-~- Node-Red** =
415 +[[image:image-20220804163015-1.png||height="621" width="466"]]
380 380  
381 381  
382 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
383 383  
384 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
419 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
385 385  
386 386  
387 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
422 +[[image:image-20220804164928-3.png||height="320" width="332"]]
388 388  
389 389  
390 -[[image:image-20220725172124-3.png||height="610" width="843"]]
425 +[[image:image-20220804164747-2.png||height="622" width="594"]]
391 391  
392 392  
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
429 +
430 +
431 +== **Step 1: Configure Frequency Band** ==
432 +
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
463 +(% class="box infomessage" %)
393 393  (((
394 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
395 - You can complete the installation manually with the following command.**
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
396 396  )))
397 397  
398 398  
469 +**Install gateway-rs.**
399 399  
471 +[[image:image-20220905165917-7.png]]
472 +
400 400  (% class="box infomessage" %)
401 401  (((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
477 +
478 +
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
402 402  (((
403 -(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
404 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
405 405  )))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
406 406  )))
407 407  
408 -[[image:image-20220728102000-1.png]]
409 409  
504 +**Check the helium_gateway Log：**
410 410  
506 +[[image:image-20220905173952-13.png]]
411 411  
412 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
413 413  
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
414 414  
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
415 415  (((
416 416  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
417 417  )))
... ... @@ -420,16 +420,17 @@
420 420  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
421 421  
422 422  
562 += 10. Reference =
423 423  
424 -= **11 Reference** =
425 425  
426 -
427 427  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
566 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
428 428  
568 +
429 429  
430 430  )))
431 431  
432 -= **12. Order Info** =
572 += 11. Order Info =
433 433  
434 434  
435 435  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -453,10 +453,9 @@
453 453  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
454 454  
455 455  
596 += 12. Manufacturer Info =
456 456  
457 -= **13. Manufacturer Info** =
458 458  
459 -
460 460  **Shenzhen Dragino Technology Development co. LTD**
461 461  
462 462  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -464,10 +464,9 @@
464 464  LongCheng Street, LongGang District ; Shenzhen 518116,China
465 465  
466 466  
606 += 13. FCC Warning =
467 467  
468 -= **14. FCC Warning** =
469 469  
470 -
471 471  (((
472 472  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 473  )))
... ... @@ -496,5 +496,7 @@
496 496  
497 497  (((
498 498  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
499 499  )))
500 500  )))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0