Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 70.1 >
edited by Xiaoye
on 2022/08/01 09:40
To version < 119.1 >
edited by Kilight Cao
on 2022/12/30 09:23
>
Change comment: Uploaded new attachment "image-20221230092303-2.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,7 +64,7 @@
64 64  
65 65  
66 66  
67 -== **1.3 Features** ==
69 +== 1.3 Features ==
68 68  
69 69  
70 70  * Open Source Debian system
... ... @@ -84,11 +84,11 @@
84 84  
85 85  
86 86  
87 -== **1.4 Block Diagram** ==
89 +== 1.4 Block Diagram ==
88 88  
89 89  
90 90  
91 -== **1.5 LED Indicators** ==
93 +== 1.5 LED Indicators ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
... ... @@ -96,36 +96,48 @@
96 96  
97 97  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
102 102  
103 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
106 106  
107 107  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
108 108  
109 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 111  
114 +== 1.6 Button Intruction ==
112 112  
113 -= **2. Quick Start** =
114 114  
117 +LPS8-V2 has a black toggle button, which is:
115 115  
116 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
117 117  
118 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 119  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 120  
121 121  
122 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 123  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124 124  
125 -== **2.1.1 connect the network.** ==
126 126  
127 -=== ===
130 += 2. Quick Start =
128 128  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
129 129  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
130 130  
131 131  
... ... @@ -147,27 +147,6 @@
147 147  [[image:image-20220622100542-2.png||height="369" width="1256"]]
148 148  
149 149  
150 -(((
151 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
152 -)))
153 -
154 -
155 -
156 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
157 -
158 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
159 -
160 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
161 -
162 -[[image:image-20220622101433-4.png]]
163 -
164 -
165 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
166 -
167 -
168 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
169 -
170 -
171 171  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
172 172  
173 173  
... ... @@ -181,32 +181,32 @@
181 181  [[image:image-20220622102847-7.png]]
182 182  
183 183  
184 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
185 185  
186 186  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
187 187  
188 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
189 189  
190 190  
191 -=== **2.2.1 Select your area frequency** ===
192 -
193 -
194 194  (((
195 195  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 +
188 +
196 196  )))
197 197  
198 -[[image:image-20220622103332-9.png]]
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
199 199  
200 200  
194 +=== 2.2.2 Get the only gateway EUI ===
201 201  
202 -=== **2.2.2 Get the only gateway EUI** ===
203 203  
204 -
205 205  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
206 206  
207 -[[image:image-20220622103355-10.png]]
208 208  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
209 209  
202 +
210 210  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
211 211  
212 212  
... ... @@ -222,7 +222,6 @@
222 222  [[image:image-20220622103956-12.png]]
223 223  
224 224  
225 -
226 226  == 2.2.3 Register the gateway to The Things Network ==
227 227  
228 228  
... ... @@ -239,20 +239,19 @@
239 239  **Get it online**
240 240  
241 241  
234 += 3. Web Configure Pages =
242 242  
243 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
244 244  
245 245  
246 -== **3.1 Home** ==
247 -
248 -
249 249  //Shows the system running status~://
250 250  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
251 251  
252 -== **3.2 LoRa Settings** ==
253 253  
244 +== 3.2 LoRa Settings ==
254 254  
255 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
256 256  
257 257  
258 258  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -259,97 +259,112 @@
259 259  
260 260  //Different LPS8v2 hardware versions can support different frequency ranges~://
261 261  
262 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
253 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
263 263  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
264 264  
265 265  (% class="wikigeneratedid" %)
266 266  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
267 267  
259 +
268 268  (% class="wikigeneratedid" %)
269 269  [[image:image-20220616110739-1.png||height="372" width="682"]]
270 270  
271 271  
272 272  (((
273 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
274 274  )))
275 275  
276 276  
269 +== 3.3 LoRaWAN Settings ==
277 277  
278 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
279 279  
280 280  
281 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
282 -
283 -
284 284  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
285 285  
276 +
286 286  [[image:image-20220616111932-2.png||height="516" width="672"]]
287 287  
288 288  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
289 289  
290 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
291 291  
292 -
293 293  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
294 294  
285 +
295 295  [[image:image-20220616113246-3.png||height="396" width="672"]]
296 296  
297 297  
298 298  (((
299 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
300 300  )))
301 301  
302 302  
294 +== 3.4 Network Settings ==
303 303  
304 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
305 305  
306 306  
307 -=== **3.4.1 Network ~-~-> WiFi** ===
299 +[[image:image-20220616114756-4.png||height="251" width="669"]]
308 308  
309 309  
310 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== 3.4.2 Network ~-~-> System Status ===
311 311  
312 312  
305 +[[image:image-20220820134112-2.png||height="539" width="668"]]
313 313  
314 -=== **3.4.2 Network ~-~-> System Status** ===
315 315  
308 +=== 3.4.3 Network ~-~-> Firewall ===
316 316  
317 -[[image:image-20220616115229-5.png||height="548" width="665"]]
318 318  
311 +[[image:image-20220616115351-6.png||height="244" width="661"]]
319 319  
320 320  
321 -=== **3.4.3 Network ~-~-> Firewall** ===
314 +== 3.5 System ==
322 322  
316 +=== 3.5.1  System ~-~-> System Overview ===
323 323  
324 -[[image:image-20220616115351-6.png||height="244" width="661"]]
325 325  
319 +Shows the system info:
326 326  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
327 327  
328 -== **3.5 System** ==
329 329  
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
330 330  
331 -=== **3.5.1  System ~-~-> System Overview** ===
332 332  
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
333 333  
334 -Shows the system info:
335 335  
330 += 4. Build-in Server =
336 336  
337 337  
338 -=== **3.5.2 System ~-~-> Backup/Restore** ===
333 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
339 339  
340 340  
341 -[[image:image-20220616115808-7.png||height="194" width="649"]]
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
342 342  
343 343  
339 +(% style="color:red" %)**Note:**
344 344  
345 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
341 + **Path**: System ~-~-> Built-in Server
346 346  
347 347  
348 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
344 +**Troubleshooting:**
349 349  
350 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
351 351  
347 +**~ 1. URL does not jump properly**
352 352  
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
350 +
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
352 +
353 +
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
355 +
356 +
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
353 353  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
354 354  
355 355  
... ... @@ -363,58 +363,188 @@
363 363  [[image:image-20220725171719-1.png||height="570" width="769"]]
364 364  
365 365  
366 -(((
367 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
368 - You can complete the installation manually with the following command.**
369 -)))
372 +== 4.2 Application Server ~-~- Node-Red ==
370 370  
371 371  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
376 +
377 +
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
379 +
380 +
381 +[[image:image-20220725172124-3.png||height="610" width="843"]]
382 +
383 +
384 +
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
386 +
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
388 +
389 +
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
401 +Port 1 of the UART on the LPS8v2 is GND
402 +
372 372  (% class="box infomessage" %)
373 373  (((
374 -(((
375 -(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
376 -chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
405 +**TXD  <~-~--> UART RXD (Gray line)**
406 +
407 +**RXD  <~-~--> UART TXD (White line)**
408 +
409 +**GND <~-~--> GND (Black line)**
377 377  )))
378 -)))
379 379  
380 380  
413 +**LPS8v2 UART connection photo**
381 381  
382 -= **5. Build-in Application Server ~-~- Node-Red** =
415 +[[image:image-20220804163015-1.png||height="621" width="466"]]
383 383  
384 384  
385 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
386 386  
387 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
419 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
388 388  
389 389  
390 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
422 +[[image:image-20220804164928-3.png||height="320" width="332"]]
391 391  
392 392  
393 -[[image:image-20220725172124-3.png||height="610" width="843"]]
425 +[[image:image-20220804164747-2.png||height="622" width="594"]]
394 394  
395 395  
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
429 +
430 +
431 +== **Step 1: Configure Frequency Band** ==
432 +
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
463 +(% class="box infomessage" %)
396 396  (((
397 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
398 - You can complete the installation manually with the following command.**
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
399 399  )))
400 400  
401 401  
469 +**Install gateway-rs.**
402 402  
471 +[[image:image-20220905165917-7.png]]
472 +
403 403  (% class="box infomessage" %)
404 404  (((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
477 +
478 +
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
405 405  (((
406 -(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
407 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
408 408  )))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
409 409  )))
410 410  
411 -[[image:image-20220728102000-1.png]]
412 412  
504 +**Check the helium_gateway Log：**
413 413  
506 +[[image:image-20220905173952-13.png]]
414 414  
415 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
416 416  
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
417 417  
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
418 418  (((
419 419  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
420 420  )))
... ... @@ -423,16 +423,17 @@
423 423  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
424 424  
425 425  
562 += 10. Reference =
426 426  
427 -= **11 Reference** =
428 428  
429 -
430 430  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
566 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
431 431  
568 +
432 432  
433 433  )))
434 434  
435 -= **12. Order Info** =
572 += 11. Order Info =
436 436  
437 437  
438 438  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -456,10 +456,9 @@
456 456  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
457 457  
458 458  
596 += 12. Manufacturer Info =
459 459  
460 -= **13. Manufacturer Info** =
461 461  
462 -
463 463  **Shenzhen Dragino Technology Development co. LTD**
464 464  
465 465  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -467,10 +467,9 @@
467 467  LongCheng Street, LongGang District ; Shenzhen 518116,China
468 468  
469 469  
606 += 13. FCC Warning =
470 470  
471 -= **14. FCC Warning** =
472 472  
473 -
474 474  (((
475 475  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
476 476  )))
... ... @@ -499,5 +499,7 @@
499 499  
500 500  (((
501 501  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
502 502  )))
503 503  )))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0