Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.9 >
edited by Xiaoling
on 2022/07/28 17:50
To version < 213.1 >
edited by Xiaoye
on 2023/06/07 09:38
>
Change comment: Uploaded new attachment "image-20230607093849-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -13,22 +13,25 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
24 24  )))
25 25  
26 26  (((
27 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
28 28  )))
29 29  
30 30  (((
31 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
32 32  )))
33 33  
34 34  (((
... ... @@ -36,14 +36,13 @@
36 36  )))
37 37  
38 38  (((
39 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,29 +50,25 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 70  
71 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -85,91 +85,132 @@
85 85  ** Semtech UDP Packet Forwarder
86 86  ** LoRaWAN Basic Station
87 87  ** ChirpStack-Gateway-Bridge (MQTT)
88 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
89 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
90 90  
91 91  
92 92  
91 +== 1.4 Block Diagram ==
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
96 96  
95 +== 1.5 LED Indicators ==
97 97  
98 98  
99 -== **1.5 LED Indicators** ==
98 +LPS8-V2 has totally four LEDs, They are:
100 100  
101 101  
102 -LPS8-V2 has totally four LEDs, They are:
101 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
103 103  
103 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104 104  
105 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
105 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106 106  
107 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
107 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108 108  
109 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
109 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110 110  
111 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
111 + ✓** SOLID RED:** Device doesn't have an Internet connection.
112 112  
113 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
113 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114 114  
115 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
116 116  
117 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
116 +== 1.6 Button Intruction ==
118 118  
119 119  
119 +LPS8-V2 has a black toggle button, which is:
120 120  
121 -= **2. Quick Start** =
122 122  
122 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
125 +
126 +
127 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
128 +
129 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
130 +
131 +
132 += 2. Quick Start =
133 +
134 +
124 124  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
125 125  
126 126  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
127 127  
128 128  
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
129 129  
130 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
142 +=== 2.1.1 connect the network ===
131 131  
132 132  
133 -== **2.1.1 connect the network.** ==
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
134 134  
135 -=== ===
136 136  
137 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
138 138  
150 +(% style="background-color:yellow" %)**dragino+dragino**
139 139  
140 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
152 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
141 141  
154 +[[image:image-20230527084515-1.png]]
155 +
156 +[[image:image-20230527085250-2.png||height="495" width="284"]]
157 +
158 +
159 +
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
161 +
162 +
163 +(((
164 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
165 +)))
166 +
167 +(((
142 142  You can also use this IP to connect.
169 +)))
143 143  
144 144  [[image:image-20220622100129-1.png||height="332" width="1263"]]
145 145  
146 146  
147 147  
148 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
175 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
149 149  
150 150  
151 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
178 +[[image:image-20230107084650-2.png||height="310" width="839"]]
152 152  
153 153  
154 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
181 +(% style="color:blue" %)**Steps to connect via fallback IP:**
155 155  
183 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
156 156  
185 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
157 157  
158 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
159 159  
160 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
188 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
161 161  
162 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
163 163  
164 -[[image:image-20220622101433-4.png]]
191 +As in the below photo:
165 165  
193 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
166 166  
167 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
168 168  
196 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
169 169  
170 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
171 171  
172 172  
201 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
202 +
203 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
204 +
205 +
206 +
207 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
208 +
209 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
210 +
211 +
173 173  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
174 174  
175 175  
... ... @@ -183,30 +183,127 @@
183 183  [[image:image-20220622102847-7.png]]
184 184  
185 185  
186 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
225 +[[image:image-20220622102901-8.png||height="476" width="938"]]
187 187  
188 188  
228 +=== 2.1.2 Access Configure Web UI ===
189 189  
190 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
191 191  
231 +**Web Interface**
192 192  
193 -=== **2.2.1 Select your area frequency** ===
233 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
194 194  
195 195  
236 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
237 +
238 +You will see the login interface of LPS8-V2 as shown below.
239 +
240 +The account details for Web Login are:
241 +
242 +(% style="color:blue" %)**User Name: root**
243 +
244 +(% style="color:blue" %)**Password:   dragino**
245 +
246 +[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +
248 +
249 +== 2.2  Typical Network Setup ==
250 +
251 +=== 2.2.1  Overview ===
252 +
253 +
254 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
255 +
256 +* **WAN Port Internet Mode**
257 +
258 +* **WiFi Client Mode**
259 +
260 +* **Cellular Mode**
261 +
262 +
263 +
264 +=== 2.2.2  Use WAN port to access Internet ===
265 +
266 +
267 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
268 +
269 +
270 +[[image:image-20230411100633-2.png||height="501" width="935"]]
271 +
272 +
273 +=== 2.2.3  Access the Internet as a WiFi Client ===
274 +
275 +
276 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
277 +
278 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
279 +
280 +[[image:image-20230411095739-1.png||height="264" width="691"]]
281 +
282 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
283 +
284 +
285 +=== 2.2.4  Use built-in 4G modem for internet access ===
286 +
287 +
288 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
289 +
290 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
291 +
292 +
293 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
294 +
295 +First, install the Micro SIM card as below direction
296 +
297 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
298 +
299 +
300 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
301 +
302 +
303 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
304 +
305 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
306 +
307 +
308 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
309 +
310 +
311 +=== 2.2.5  Check Internet connection ===
312 +
313 +
314 +In the **home** page, we can check the Internet connection.
315 +
316 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
317 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
318 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
319 +
320 +[[image:image-20230411101534-3.png||height="544" width="942"]]
321 +
322 +
323 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
324 +
325 +=== 2.3.1 Select your area frequency ===
326 +
327 +
328 +(((
196 196  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
197 197  
198 -[[image:image-20220622103332-9.png]]
331 +
332 +)))
199 199  
334 +[[image:image-20220622103332-9.png||height="485" width="938"]]
200 200  
201 201  
202 -=== **2.2.2 Get the only gateway EUI** ===
337 +=== 2.3.2 Get the only gateway EUI ===
203 203  
204 204  
205 205  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
206 206  
207 -[[image:image-20220622103355-10.png]]
208 208  
343 +[[image:image-20220622103355-10.png||height="698" width="949"]]
209 209  
345 +
210 210  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
211 211  
212 212  
... ... @@ -222,10 +222,9 @@
222 222  [[image:image-20220622103956-12.png]]
223 223  
224 224  
361 +=== 2.3.3 Register the gateway to The Things Network ===
225 225  
226 -== 2.2.3 Register the gateway to The Things Network ==
227 227  
228 -
229 229  **Login to The Things Network**
230 230  
231 231  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -239,115 +239,177 @@
239 239  **Get it online**
240 240  
241 241  
377 += 3. Web Configure Pages =
242 242  
243 -= **3. Web Configure Pages** =
379 +== 3.1 Home ==
244 244  
245 245  
246 -== **3.1 Home** ==
382 +Shows the system running status:
247 247  
384 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
248 248  
249 -//Shows the system running status~://
250 250  
387 +== 3.2 LoRa Settings ==
251 251  
252 -== **3.2 LoRa Settings** ==
389 +=== 3.2.1 LoRa ~-~-> LoRa ===
253 253  
254 254  
255 -=== **3.2.1 LoRa ~-~-> LoRa** ===
392 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 256  
394 +Different LPS8v2 hardware versions can support different frequency ranges:
257 257  
258 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
396 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
397 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 259  
260 -//Different LPS8v2 hardware versions can support different frequency ranges~://
399 +(% class="wikigeneratedid" %)
400 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
261 261  
262 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
263 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
264 264  
265 265  (% class="wikigeneratedid" %)
266 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
267 -
268 -(% class="wikigeneratedid" %)
269 269  [[image:image-20220616110739-1.png||height="372" width="682"]]
270 270  
271 271  
272 272  (((
273 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
408 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
274 274  )))
275 275  
276 276  
412 +== 3.3 LoRaWAN Settings ==
277 277  
278 -== **3.3 LoRaWAN Settings** ==
414 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
279 279  
280 280  
281 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
417 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
282 282  
283 283  
284 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
285 -
286 286  [[image:image-20220616111932-2.png||height="516" width="672"]]
287 287  
288 288  
423 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
289 289  
290 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
291 291  
426 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
292 292  
293 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
294 294  
295 295  [[image:image-20220616113246-3.png||height="396" width="672"]]
296 296  
297 297  
298 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
432 +(((
433 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
434 +)))
299 299  
300 300  
437 +== 3.4 Network Settings ==
301 301  
302 -== **3.4 Network Settings** ==
439 +=== 3.4.1 Network ~-~-> WiFi ===
303 303  
304 304  
305 -=== **3.4.1 Network ~-~-> WiFi** ===
442 +[[image:image-20220616114756-4.png||height="251" width="669"]]
306 306  
307 307  
308 -[[image:image-20220616114756-4.png||height="251" width="669"]]
445 +=== 3.4.2 Network ~-~-> System Status ===
309 309  
310 310  
448 +[[image:image-20220820134112-2.png||height="539" width="668"]]
311 311  
312 -=== **3.4.2 Network ~-~-> System Status** ===
313 313  
451 +=== 3.4.3 Network ~-~-> Network ===
314 314  
315 -[[image:image-20220616115229-5.png||height="548" width="665"]]
316 316  
454 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
317 317  
456 +[[image:image-20230214093657-2.png||height="333" width="858"]]
318 318  
319 -=== **3.4.3 Network ~-~-> Firewall** ===
320 320  
459 +=== 3.4.4 Network ~-~-> Cellular ===
321 321  
322 -[[image:image-20220616115351-6.png||height="244" width="661"]]
323 323  
462 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
324 324  
464 +(% style="color:red" %)**Note: APN cannot be empty.**
325 325  
326 -== **3.5 System** ==
466 +[[image:image-20230228115126-1.png]]
327 327  
328 328  
329 -=== **3.5.1  System ~-~-> System Overview** ===
469 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
330 330  
471 +[[image:image-20230228115535-2.png||height="478" width="888"]]
331 331  
473 +
474 +== 3.5 System ==
475 +
476 +=== 3.5.1 System ~-~-> System Overview ===
477 +
478 +
332 332  Shows the system info:
333 333  
481 +[[image:image-20220917144512-5.png||height="618" width="853"]]
334 334  
335 335  
336 -=== **3.5.2 System ~-~-> Backup/Restore** ===
484 +=== 3.5.2 System ~-~-> System General ===
337 337  
338 338  
339 -[[image:image-20220616115808-7.png||height="194" width="649"]]
487 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
340 340  
489 +In addition, Users can customize the FallBack IP address.
341 341  
491 +[[image:image-20230214094058-3.png]]
342 342  
343 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
344 344  
494 +=== 3.5.3 System ~-~-> Backup/Restore ===
345 345  
346 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
347 347  
348 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
497 +[[image:image-20220917144725-6.png||height="208" width="869"]]
349 349  
350 350  
500 +=== 3.5.4 System ~-~-> Remoteit ===
501 +
502 +
503 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
504 +
505 +
506 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
507 +
508 +[[image:image-20221230092303-2.png]]
509 +
510 +
511 +=== 3.5.5 System ~-~-> Package Management ===
512 +
513 +
514 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
515 +
516 +[[image:image-20230214094316-4.png]]
517 +
518 +
519 += 4. Build-in Server =
520 +
521 +
522 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
523 +
524 +
525 +[[image:image-20230214095318-5.png||height="347" width="980"]]
526 +
527 +
528 +(% style="color:red" %)**Note:**
529 +
530 + **Path**: System ~-~-> Built-in Server
531 +
532 +
533 +**Troubleshooting:**
534 +
535 +
536 +**~ 1. URL does not jump properly**
537 +
538 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
539 +
540 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
541 +
542 +
543 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
544 +
545 +
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
547 +
351 351  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
352 352  
353 353  
... ... @@ -361,69 +361,380 @@
361 361  [[image:image-20220725171719-1.png||height="570" width="769"]]
362 362  
363 363  
364 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
365 - You can complete the installation manually with the following command.**
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
366 366  
367 367  
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
565 +
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
567 +
568 +[[image:image-20230321092456-1.png]]
569 +
570 +
571 +== 4.2 Application Server ~-~- Node-Red ==
572 +
573 +
574 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
575 +
576 +
577 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
578 +
579 +
580 +[[image:image-20220725172124-3.png||height="610" width="843"]]
581 +
582 +
583 +
584 +=== **Using Node-Red, InfluxDB and Grafana** ===
585 +
586 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
587 +
588 +
589 +the users can refer to this link to install them.
590 +
591 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
592 +
593 +
594 +=== **Upgrade the node.js** ===
595 +
596 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
597 +
598 +
599 +the users can refer to this link to upgrade them.
600 +
601 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
602 +
603 +
604 +== 4.3 How to disable the built-in server ==
605 +
606 +
607 +Use the following commands to start and stop the TTNv3 service:
608 +
368 368  (% class="box infomessage" %)
369 369  (((
370 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
611 +**# start**
612 +systemctl start ttnstack
371 371  
372 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
614 +**# stop**
615 +systemctl stop ttnstack
616 +
617 +**# enable**
618 +systemctl enable ttnstack
619 +
620 +**#disable**
621 +systemctl disable ttnstack
373 373  )))
374 374  
624 +Use the following commands to start and stop the Node-Red service:
375 375  
626 +(% class="box infomessage" %)
627 +(((
628 +**# start**
629 +systemctl start nodered
376 376  
377 -= **5. Build-in Application Server ~-~- Node-Red** =
631 +**# stop**
632 +systemctl stop nodered
378 378  
634 +**# enable**
635 +systemctl enable nodered
379 379  
380 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
637 +**#disable**
638 +systemctl disable nodered
639 +)))
381 381  
382 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
383 383  
642 +== 4.4 How to use ChirpStack on LPS8-V2 ==
384 384  
385 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
386 386  
645 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
387 387  
388 -[[image:image-20220725172124-3.png||height="610" width="843"]]
647 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
389 389  
390 390  
391 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
392 - You can complete the installation manually with the following command.**
650 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
393 393  
394 394  
653 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
395 395  
655 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
656 +
657 +[[image:image-20230602140406-3.png||height="480" width="918"]]
658 +
659 +
660 +When the configuration is complete, click** "Save&Apply"**.
661 +
662 +
663 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
664 +
665 +[[image:image-20230602143122-4.png||height="511" width="983"]]
666 +
667 +
668 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
669 +
670 +
671 +
672 += 6. How users can access LPS8-V2 using serial USB =
673 +
674 +
675 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
676 +
677 +
678 +Port 1 of the UART on the LPS8-V2 is GND
679 +
396 396  (% class="box infomessage" %)
397 397  (((
398 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
399 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
682 +**TXD  <~-~--> UART RXD (Gray line)**
683 +
684 +**RXD  <~-~--> UART TXD (White line)**
685 +
686 +**GND <~-~--> GND (Black line)**
400 400  )))
401 401  
402 -[[image:image-20220728102000-1.png]]
403 403  
690 +**LPS8v2 UART connection photo**
404 404  
405 405  
406 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
693 +[[image:image-20230421094319-2.png||height="351" width="392"]]
407 407  
695 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
408 408  
697 +
698 +[[image:image-20220804164928-3.png||height="320" width="332"]]
699 +
700 +
701 +[[image:image-20220804164747-2.png||height="622" width="594"]]
702 +
703 +
704 += 7. Use the helium gateway-rs as the Data-only Hotspot =
705 +
706 +
707 +== **Step 1: Configure Frequency Band** ==
708 +
709 +
710 +//Each country has a requirement for frequency region. Choose the right one for your area.//
711 +
712 +[[image:image-20220905164308-1.png]]
713 +
714 +
715 +
716 +== **Step 2: Configure the forward address** ==
717 +
718 +
719 +**Select one of the servers to configure.**
720 +
721 +**For example:**
722 +
723 +[[image:image-20220905164847-2.png]]
724 +
725 +
726 +
727 +== **Step 3: Download and Install the Helium-gateway-rs** ==
728 +
729 +
730 +**Access the gateway CLI via SSH.**
731 +
732 +[[image:image-20230425153417-2.png]]
733 +
734 +
735 +**Install the new gateway-rs**
736 +
737 +(% class="box infomessage" %)
409 409  (((
410 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
739 +**apt update && apt install helium-gateway**
411 411  )))
412 412  
742 +[[image:image-20230425154058-4.png]]
743 +
744 +
745 +
746 +Option: If you installed the older gateway-rs, you have clean it
747 +
748 +(% class="box infomessage" %)
413 413  (((
414 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
750 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
751 +)))
415 415  
753 +[[image:image-20230425153823-3.png]]
416 416  
417 417  
418 -= **11 Reference** =
756 +**Change the region setting:**
419 419  
420 420  
759 +(% class="box infomessage" %)
760 +(((
761 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
762 +
763 +
764 +**e.g: **
765 +
766 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
767 +
768 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
769 +)))
770 +
771 +
772 +**Restart the gateway-rs**
773 +
774 +(% class="box infomessage" %)
775 +(((
776 +**systemctl restart helium_gateway**
777 +)))
778 +
779 +[[image:image-20230425155612-7.png||height="265" width="911"]]
780 +
781 +
782 +
783 +**Check the helium_gateway running status**
784 +
785 +
786 +(% class="box infomessage" %)
787 +(((
788 +**systemctl status helium_gateway**
789 +)))
790 +
791 +
792 +[[image:image-20230425154740-5.png]]
793 +
794 +
795 +
796 +**Check the helium_gateway Log：**
797 +
798 +(% class="box infomessage" %)
799 +(((
800 +**journalctl -u helium_gateway -f**
801 +)))
802 +
803 +
804 +[[image:image-20230425155659-8.png]]
805 +
806 +
807 += 8. OTA System Update =
808 +
809 +
810 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
811 +
812 +
813 += 9. FAQ =
814 +
815 +== 9.1 How to change Hostname ==
816 +
817 +
818 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
819 +
820 +(% class="box infomessage" %)
821 +(((
822 +hostnamectl set-hostname dragino-123456
823 +)))
824 +
825 +[[image:image-20230517102429-1.png]]
826 +
827 +After the configuration is complete, run "reboot" to restart the gateway.
828 +
829 +
830 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
831 +
832 +
833 +Migrate guide:
834 +
835 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
836 +
837 +2. Download migrate script and run it.
838 +
839 +(% class="box infomessage" %)
840 +(((
841 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
842 +)))
843 +
844 +[[image:image-20230602135658-1.png||height="545" width="986"]]
845 +
846 +
847 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
848 +
849 +[[image:image-20230602135825-2.png||height="356" width="855"]]
850 +
851 +The default account for chirpstack is: **admin/admin**
852 +
853 +
854 += 10. Trouble Shooting =
855 +
856 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
857 +
858 +
859 +[[image:image-20220920135918-1.png]]
860 +
861 +
862 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
863 +
864 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
865 +
866 +
867 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
868 +
869 +**Click the update URL button to configure the URL with the current eth port address.**
870 +
871 +[[image:image-20220920141936-2.png]]
872 +
873 +
874 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
875 +
876 +
877 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
878 +
879 +[[image:image-20230508171607-1.png]]
880 +
881 +
882 +== 10.3  Fallback IP does not work, how can users check ==
883 +
884 +
885 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
886 +
887 +
888 +**1.Check whether the configuration is correct**
889 +
890 +Run the CMD command to ipconfig and ping 172.31.255.254.
891 +
892 +If this fails, the user needs to reconfigure.
893 +
894 +[[image:image-20230413170224-3.png||height="433" width="707"]]
895 +
896 +[[image:image-20230413170246-4.png]]
897 +
898 +
899 +**2. Check whether the firewall is disabled**
900 +
901 +If the firewall is not down, this will affect access to the gateway.
902 +
903 +
904 +== 10.4  Click "Manual_Update", why there is no response? ==
905 +
906 +
907 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
908 +
909 +
910 +[[image:image-20230527090555-3.png||height="660" width="832"]]
911 +
912 +
913 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
914 +
915 +
916 +(((
917 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
918 +)))
919 +
920 +(((
921 +With your question as detailed as possible. We will reply and help you in the shortest.
922 +
923 +
924 += 12. Reference =
925 +
926 +
421 421  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
928 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
422 422  
930 +
423 423  
424 424  )))
425 425  
426 -= **12. Order Info** =
934 += 13. Order Info =
427 427  
428 428  
429 429  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -437,7 +437,6 @@
437 437  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
438 438  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
439 439  
440 -
441 441  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
442 442  
443 443  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -448,10 +448,9 @@
448 448  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
449 449  
450 450  
958 += 14. Manufacturer Info =
451 451  
452 -= **13. Manufacturer Info** =
453 453  
454 -
455 455  **Shenzhen Dragino Technology Development co. LTD**
456 456  
457 457  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -459,23 +459,38 @@
459 459  LongCheng Street, LongGang District ; Shenzhen 518116,China
460 460  
461 461  
968 += 15. FCC Warning =
462 462  
463 -= **14. FCC Warning** =
464 464  
465 -
971 +(((
466 466  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
973 +)))
467 467  
975 +(((
468 468  ~-~- Reorient or relocate the receiving antenna.
977 +)))
469 469  
979 +(((
470 470  ~-~- Increase the separation between the equipment and receiver.
981 +)))
471 471  
983 +(((
472 472  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
985 +)))
473 473  
987 +(((
474 474  ~-~- Consult the dealer or an experienced radio/TV technician for help.
989 +)))
475 475  
476 476  
992 +(((
477 477  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
994 +)))
478 478  
479 479  
997 +(((
480 480  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
999 +
1000 +
481 481  )))
1002 +)))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0