Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.8 >
edited by Xiaoling
on 2022/07/28 17:49
To version < 228.1 >
edited by Kilight Cao
on 2023/06/19 10:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,22 +13,25 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
24 24  )))
25 25  
26 26  (((
27 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
28 28  )))
29 29  
30 30  (((
31 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
32 32  )))
33 33  
34 34  (((
... ... @@ -36,14 +36,13 @@
36 36  )))
37 37  
38 38  (((
39 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,29 +50,23 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +== 1.3 Features ==
69 69  
70 70  
71 -
72 -
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -85,94 +85,126 @@
85 85  ** Semtech UDP Packet Forwarder
86 86  ** LoRaWAN Basic Station
87 87  ** ChirpStack-Gateway-Bridge (MQTT)
88 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
89 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
90 90  
87 +== 1.4 LED Indicators ==
91 91  
92 92  
90 +LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
97 97  
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
98 98  
99 -== **1.5 LED Indicators** ==
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
100 100  
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 101  
102 -LPS8-V2 has totally four LEDs, They are:
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
103 103  
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
104 104  
105 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
108 +== 1.5 Button Intruction ==
107 107  
108 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
109 109  
111 +LPS8-V2 has a black toggle button, which is:
110 110  
111 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
112 112  
113 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
114 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
114 114  
115 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
116 116  
117 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
118 118  
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
119 119  
120 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
121 121  
122 122  
124 += 2. Quick Start =
123 123  
124 -= **2. Quick Start** =
125 125  
126 -
127 127  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
128 128  
129 129  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
130 130  
131 131  
132 +== 2.1 Connects to the network and accesses the gateway Web UI ==
132 132  
133 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
134 +=== 2.1.1 connect the network ===
134 134  
135 135  
136 -== **2.1.1 connect the network.** ==
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
137 137  
138 -=== ===
139 139  
140 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
141 141  
142 +(% style="background-color:yellow" %)**dragino+dragino**
142 142  
143 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
144 144  
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
155 +(((
156 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
157 +)))
158 +
159 +(((
145 145  You can also use this IP to connect.
161 +)))
146 146  
147 147  [[image:image-20220622100129-1.png||height="332" width="1263"]]
148 148  
149 149  
150 150  
151 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
152 152  
153 153  
154 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
155 155  
156 156  
157 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
158 158  
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
159 159  
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
160 160  
161 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
162 162  
163 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
164 164  
165 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
166 166  
167 -[[image:image-20220622101433-4.png]]
183 +As in the below photo:
168 168  
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
169 169  
170 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
171 171  
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
172 172  
173 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
174 174  
175 175  
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
201 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
202 +
203 +
176 176  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
177 177  
178 178  
... ... @@ -186,30 +186,125 @@
186 186  [[image:image-20220622102847-7.png]]
187 187  
188 188  
189 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
217 +[[image:image-20220622102901-8.png||height="476" width="938"]]
190 190  
191 191  
220 +=== 2.1.2 Access Configure Web UI ===
192 192  
193 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
194 194  
223 +**Web Interface**
195 195  
196 -=== **2.2.1 Select your area frequency** ===
225 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
197 197  
198 198  
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 +
230 +You will see the login interface of LPS8-V2 as shown below.
231 +
232 +The account details for Web Login are:
233 +
234 +(% style="color:blue" %)**User Name: root**
235 +
236 +(% style="color:blue" %)**Password:   dragino**
237 +
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
239 +
240 +
241 +== 2.2  Typical Network Setup ==
242 +
243 +=== 2.2.1  Overview ===
244 +
245 +
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
318 +(((
199 199  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
200 200  
201 -[[image:image-20220622103332-9.png]]
321 +
322 +)))
202 202  
324 +[[image:image-20220622103332-9.png||height="485" width="938"]]
203 203  
204 204  
205 -=== **2.2.2 Get the only gateway EUI** ===
327 +=== 2.3.2 Get the only gateway EUI ===
206 206  
207 207  
208 208  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
209 209  
210 -[[image:image-20220622103355-10.png]]
211 211  
333 +[[image:image-20220622103355-10.png||height="698" width="949"]]
212 212  
335 +
213 213  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
214 214  
215 215  
... ... @@ -225,10 +225,9 @@
225 225  [[image:image-20220622103956-12.png]]
226 226  
227 227  
351 +=== 2.3.3 Register the gateway to The Things Network ===
228 228  
229 -== 2.2.3 Register the gateway to The Things Network ==
230 230  
231 -
232 232  **Login to The Things Network**
233 233  
234 234  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -242,191 +242,508 @@
242 242  **Get it online**
243 243  
244 244  
367 += 3. Web Configure Pages =
245 245  
246 -= **3. Web Configure Pages** =
369 +== 3.1 Home ==
247 247  
248 248  
249 -== **3.1 Home** ==
372 +Shows the system running status:
250 250  
374 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
251 251  
252 -//Shows the system running status~://
253 253  
377 +== 3.2 LoRa Settings ==
254 254  
255 -== **3.2 LoRa Settings** ==
379 +=== 3.2.1 LoRa ~-~-> LoRa ===
256 256  
257 257  
258 -=== **3.2.1 LoRa ~-~-> LoRa** ===
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
259 259  
384 +Different LPS8v2 hardware versions can support different frequency ranges:
260 260  
261 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
262 262  
263 -//Different LPS8v2 hardware versions can support different frequency ranges~://
389 +(% class="wikigeneratedid" %)
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
264 264  
265 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
266 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
267 267  
268 268  (% class="wikigeneratedid" %)
269 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
270 -
271 -(% class="wikigeneratedid" %)
272 272  [[image:image-20220616110739-1.png||height="372" width="682"]]
273 273  
274 274  
275 275  (((
276 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
398 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
277 277  )))
278 278  
279 279  
402 +== 3.3 LoRaWAN Settings ==
280 280  
281 -== **3.3 LoRaWAN Settings** ==
404 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
282 282  
283 283  
284 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
285 285  
286 286  
287 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
288 -
289 289  [[image:image-20220616111932-2.png||height="516" width="672"]]
290 290  
291 291  
413 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
292 292  
293 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
294 294  
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
295 295  
296 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
297 297  
298 298  [[image:image-20220616113246-3.png||height="396" width="672"]]
299 299  
300 300  
301 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
422 +(((
423 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
424 +)))
302 302  
303 303  
427 +== 3.4 Network Settings ==
304 304  
305 -== **3.4 Network Settings** ==
429 +=== 3.4.1 Network ~-~-> WiFi ===
306 306  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
307 307  
308 -=== **3.4.1 Network ~-~-> WiFi** ===
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
309 309  
310 310  
311 -[[image:image-20220616114756-4.png||height="251" width="669"]]
436 +=== 3.4.2 Network ~-~-> System Status ===
312 312  
313 313  
439 +[[image:image-20220820134112-2.png||height="539" width="668"]]
314 314  
315 -=== **3.4.2 Network ~-~-> System Status** ===
316 316  
442 +=== 3.4.3 Network ~-~-> Network ===
317 317  
318 -[[image:image-20220616115229-5.png||height="548" width="665"]]
319 319  
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
320 320  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
321 321  
322 -=== **3.4.3 Network ~-~-> Firewall** ===
323 323  
450 +=== 3.4.4 Network ~-~-> Cellular ===
324 324  
325 -[[image:image-20220616115351-6.png||height="244" width="661"]]
326 326  
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
327 327  
455 +(% style="color:red" %)**Note: APN cannot be empty.**
328 328  
329 -== **3.5 System** ==
457 +[[image:image-20230228115126-1.png]]
330 330  
331 331  
332 -=== **3.5.1  System ~-~-> System Overview** ===
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
333 333  
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
334 334  
464 +
465 +== 3.5 System ==
466 +
467 +=== 3.5.1 System ~-~-> System Overview ===
468 +
469 +
335 335  Shows the system info:
336 336  
472 +[[image:image-20220917144512-5.png||height="618" width="853"]]
337 337  
338 338  
339 -=== **3.5.2 System ~-~-> Backup/Restore** ===
475 +=== 3.5.2 System ~-~-> System General ===
340 340  
341 341  
342 -[[image:image-20220616115808-7.png||height="194" width="649"]]
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
343 343  
480 +In addition, Users can customize the FallBack IP address.
344 344  
482 +[[image:image-20230214094058-3.png]]
345 345  
346 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
347 347  
485 +=== 3.5.3 System ~-~-> Backup/Restore ===
348 348  
349 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
350 350  
351 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
488 +[[image:image-20220917144725-6.png||height="208" width="869"]]
352 352  
353 353  
491 +=== 3.5.4 System ~-~-> Remoteit ===
492 +
493 +
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
495 +
496 +
497 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
498 +
499 +[[image:image-20221230092303-2.png]]
500 +
501 +
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
510 += 4. Build-in Server =
511 +
512 +
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
514 +
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
516 +
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
518 +
519 +
520 +
521 +(% style="color:red" %)**Note:**
522 +
523 + **Path**: Server ~-~-> Network Server
524 +
525 + Server ~-~-> Application Server
526 +
527 +
528 +**Troubleshooting:**
529 +
530 +
531 +**~ 1. URL does not jump properly**
532 +
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
534 +
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
536 +
537 +
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
539 +
540 +
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
542 +
354 354  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
355 355  
356 356  
357 357  Login account:
358 358  
359 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
360 360  
361 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
362 362  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
363 363  
364 -[[image:image-20220725171719-1.png||height="570" width="769"]]
365 365  
366 366  
367 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
368 - You can complete the installation manually with the following command.**
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
369 369  
370 370  
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 +
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +== 4.2 Application Server ~-~- Node-Red ==
567 +
568 +
569 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
570 +
571 +
572 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
573 +
574 +
575 +[[image:image-20220725172124-3.png||height="610" width="843"]]
576 +
577 +
578 +
579 +=== **Using Node-Red, InfluxDB and Grafana** ===
580 +
581 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
582 +
583 +
584 +the users can refer to this link to install them.
585 +
586 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
587 +
588 +
589 +=== **Upgrade the node.js** ===
590 +
591 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
592 +
593 +
594 +the users can refer to this link to upgrade them.
595 +
596 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
597 +
598 +
599 +== 4.3 How to disable the built-in server ==
600 +
601 +
602 +Use the following commands to start and stop the TTNv3 service:
603 +
371 371  (% class="box infomessage" %)
372 372  (((
373 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
606 +**# start**
607 +systemctl start ttnstack
374 374  
375 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
609 +**# stop**
610 +systemctl stop ttnstack
611 +
612 +**# enable**
613 +systemctl enable ttnstack
614 +
615 +**#disable**
616 +systemctl disable ttnstack
376 376  )))
377 377  
619 +Use the following commands to start and stop the Node-Red service:
378 378  
621 +(% class="box infomessage" %)
622 +(((
623 +**# start**
624 +systemctl start nodered
379 379  
380 -= **5. Build-in Application Server ~-~- Node-Red** =
626 +**# stop**
627 +systemctl stop nodered
381 381  
629 +**# enable**
630 +systemctl enable nodered
382 382  
383 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
632 +**#disable**
633 +systemctl disable nodered
634 +)))
384 384  
385 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
386 386  
637 +== 4.4 How to use ChirpStack on LPS8-V2 ==
387 387  
388 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
389 389  
640 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
390 390  
391 -[[image:image-20220725172124-3.png||height="610" width="843"]]
642 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
392 392  
393 393  
394 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
395 - You can complete the installation manually with the following command.**
645 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
396 396  
397 397  
648 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
398 398  
650 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
651 +
652 +[[image:image-20230602140406-3.png||height="480" width="918"]]
653 +
654 +
655 +When the configuration is complete, click** "Save&Apply"**.
656 +
657 +
658 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
659 +
660 +[[image:image-20230602143122-4.png||height="511" width="983"]]
661 +
662 +
663 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
664 +
665 +
666 +
667 += 6. How users can access LPS8-V2 using serial USB =
668 +
669 +
670 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
671 +
672 +
673 +Port 1 of the UART on the LPS8-V2 is GND
674 +
399 399  (% class="box infomessage" %)
400 400  (((
401 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
677 +**TXD  <~-~--> UART RXD (Gray line)**
678 +
679 +**RXD  <~-~--> UART TXD (White line)**
680 +
681 +**GND <~-~--> GND (Black line)**
403 403  )))
404 404  
405 -[[image:image-20220728102000-1.png]]
406 406  
685 +**LPS8v2 UART connection photo**
407 407  
408 408  
409 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
688 +[[image:image-20230421094319-2.png||height="351" width="392"]]
410 410  
690 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
411 411  
692 +
693 +[[image:image-20220804164928-3.png||height="320" width="332"]]
694 +
695 +
696 +[[image:image-20220804164747-2.png||height="622" width="594"]]
697 +
698 +
699 += 7. OTA System Update =
700 +
701 +
702 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
703 +
704 +
705 +== 7.1 Auto-update method ==
706 +
707 +
708 +The default, each gateway will enable the auto-update function.
709 +
710 +this function will be triggered every boot and every midnight.
711 +
712 +
713 +Users can enable/disable it via Web Page
714 +
715 +[[image:image-20230607094447-2.png]]
716 +
717 +
718 +== 7.2 Manual upgrade method ==
719 +
720 +
721 +1). Using the Linux command to upgrade the system
722 +
723 +
724 +(% class="box infomessage" %)
412 412  (((
413 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
726 +**apt update && apt install *dragino***
414 414  )))
415 415  
729 +
730 +2). Upgrade the system via the Web page button of "Manual Update"
731 +
732 +
733 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
734 +
735 +[[image:image-20230607093849-1.png]]
736 +
737 +
738 += 8. FAQ =
739 +
740 +== 8.1 How to change Hostname ==
741 +
742 +
743 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
744 +
745 +(% class="box infomessage" %)
416 416  (((
417 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
747 +hostnamectl set-hostname dragino-123456
748 +)))
418 418  
750 +[[image:image-20230517102429-1.png]]
419 419  
752 +After the configuration is complete, run "reboot" to restart the gateway.
420 420  
421 -= **11 Reference** =
422 422  
755 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
423 423  
757 +
758 +Migrate guide:
759 +
760 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
761 +
762 +**2. On the Server ~-~-> Network Server interface, click "Management"**
763 +
764 +[[image:image-20230616162454-1.png]]
765 +
766 +
767 +**3. Click "Migrate-Chirpstack"**
768 +
769 +[[image:image-20230616162742-2.png]]
770 +
771 +
772 +**4. Strat Install **
773 +
774 +
775 +Click start Install and wait until the migration succeeds
776 +
777 +[[image:image-20230616162934-3.png]]
778 +
779 +
780 +**5.Migration complete check result**
781 +
782 +[[image:image-20230616174526-4.png||height="706" width="983"]]
783 +
784 +
785 +[[image:image-20230616180004-9.png]]
786 +
787 +
788 +
789 += 9. Trouble Shooting =
790 +
791 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
792 +
793 +
794 +[[image:image-20220920135918-1.png]]
795 +
796 +
797 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
798 +
799 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
800 +
801 +
802 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
803 +
804 +**Click the update URL button to configure the URL with the current eth port address.**
805 +
806 +[[image:image-20220920141936-2.png]]
807 +
808 +
809 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
810 +
811 +
812 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
813 +
814 +[[image:image-20230508171607-1.png]]
815 +
816 +
817 +== 9.3  Fallback IP does not work, how can users check ==
818 +
819 +
820 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
821 +
822 +
823 +**1.Check whether the configuration is correct**
824 +
825 +Run the CMD command to ipconfig and ping 172.31.255.254.
826 +
827 +If this fails, the user needs to reconfigure.
828 +
829 +[[image:image-20230413170224-3.png||height="433" width="707"]]
830 +
831 +[[image:image-20230413170246-4.png]]
832 +
833 +
834 +**2. Check whether the firewall is disabled**
835 +
836 +If the firewall is not down, this will affect access to the gateway.
837 +
838 +
839 +== 9.4  Click "Manual_Update", why there is no response? ==
840 +
841 +
842 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
843 +
844 +
845 +[[image:image-20230527090555-3.png||height="660" width="832"]]
846 +
847 +
848 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
849 +
850 +
851 +(((
852 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
853 +)))
854 +
855 +(((
856 +With your question as detailed as possible. We will reply and help you in the shortest.
857 +
858 +
859 += 11. Reference =
860 +
861 +
424 424  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
863 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
425 425  
426 426  
427 427  )))
428 428  
429 -= **12. Order Info** =
868 += 12. Order Info =
430 430  
431 431  
432 432  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -434,27 +434,33 @@
434 434  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
435 435  
436 436  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
876 +
437 437  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
878 +
438 438  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
880 +
439 439  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
882 +
440 440  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
884 +
441 441  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
442 442  
443 -
444 444  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
445 445  
446 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
447 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
448 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
449 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
889 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
450 450  
451 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
891 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
452 452  
893 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
453 453  
895 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
454 454  
455 -= **13. Manufacturer Info** =
897 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
456 456  
457 457  
900 += 13. Manufacturer Info =
901 +
902 +
458 458  **Shenzhen Dragino Technology Development co. LTD**
459 459  
460 460  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -462,23 +462,38 @@
462 462  LongCheng Street, LongGang District ; Shenzhen 518116,China
463 463  
464 464  
910 += 14. FCC Warning =
465 465  
466 -= **14. FCC Warning** =
467 467  
468 -
913 +(((
469 469  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
915 +)))
470 470  
917 +(((
471 471  ~-~- Reorient or relocate the receiving antenna.
919 +)))
472 472  
921 +(((
473 473  ~-~- Increase the separation between the equipment and receiver.
923 +)))
474 474  
925 +(((
475 475  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
927 +)))
476 476  
929 +(((
477 477  ~-~- Consult the dealer or an experienced radio/TV technician for help.
931 +)))
478 478  
479 479  
934 +(((
480 480  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
936 +)))
481 481  
482 482  
939 +(((
483 483  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
941 +
942 +
484 484  )))
944 +)))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0