Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.8 >
edited by Xiaoling
on 2022/07/28 17:49
To version < 121.1 >
edited by Kilight Cao
on 2022/12/30 09:28
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,8 +50,6 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,8 +58,6 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 65  * Work Temperature: -20 ~~ 65°C
... ... @@ -67,12 +67,9 @@
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
68 +== 1.3 Features ==
70 70  
71 71  
72 -
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -89,60 +89,70 @@
89 89  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
90 90  
91 91  
87 +== 1.4 Block Diagram ==
92 92  
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
91 +== 1.5 LED Indicators ==
96 96  
97 97  
94 +LPS8-V2 has totally four LEDs, They are:
98 98  
99 -== **1.5 LED Indicators** ==
100 100  
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
101 101  
102 -LPS8-V2 has totally four LEDs, They are:
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
103 103  
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 104  
105 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 106  
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
107 107  
108 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 109  
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
112 112  
113 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
112 +== 1.6 Button Intruction ==
114 114  
115 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
116 116  
117 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
115 +LPS8-V2 has a black toggle button, which is:
118 118  
119 119  
120 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
118 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
122 122  
123 123  
124 -= **2. Quick Start** =
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
125 125  
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
128 128  
129 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
128 += 2. Quick Start =
130 130  
131 131  
131 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
133 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== **2.1.1 connect the network.** ==
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== ===
138 +== 2.1.1 connect the network ==
139 139  
140 +
140 140  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 141  
142 142  
144 +(((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 +)))
144 144  
148 +(((
145 145  You can also use this IP to connect.
150 +)))
146 146  
147 147  [[image:image-20220622100129-1.png||height="332" width="1263"]]
148 148  
... ... @@ -154,25 +154,6 @@
154 154  [[image:image-20220622100542-2.png||height="369" width="1256"]]
155 155  
156 156  
157 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
158 -
159 -
160 -
161 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
162 -
163 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
164 -
165 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
166 -
167 -[[image:image-20220622101433-4.png]]
168 -
169 -
170 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
171 -
172 -
173 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
174 -
175 -
176 176  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
177 177  
178 178  
... ... @@ -186,30 +186,32 @@
186 186  [[image:image-20220622102847-7.png]]
187 187  
188 188  
189 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
175 +[[image:image-20220622102901-8.png||height="476" width="938"]]
190 190  
191 191  
178 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
192 192  
193 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
180 +=== 2.2.1 Select your area frequency ===
194 194  
195 195  
196 -=== **2.2.1 Select your area frequency** ===
197 -
198 -
183 +(((
199 199  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
200 200  
201 -[[image:image-20220622103332-9.png]]
186 +
187 +)))
202 202  
189 +[[image:image-20220622103332-9.png||height="485" width="938"]]
203 203  
204 204  
205 -=== **2.2.2 Get the only gateway EUI** ===
192 +=== 2.2.2 Get the only gateway EUI ===
206 206  
207 207  
208 208  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
209 209  
210 -[[image:image-20220622103355-10.png]]
211 211  
198 +[[image:image-20220622103355-10.png||height="698" width="949"]]
212 212  
200 +
213 213  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
214 214  
215 215  
... ... @@ -225,7 +225,6 @@
225 225  [[image:image-20220622103956-12.png]]
226 226  
227 227  
228 -
229 229  == 2.2.3 Register the gateway to The Things Network ==
230 230  
231 231  
... ... @@ -242,20 +242,19 @@
242 242  **Get it online**
243 243  
244 244  
232 += 3. Web Configure Pages =
245 245  
246 -= **3. Web Configure Pages** =
234 +== 3.1 Home ==
247 247  
248 248  
249 -== **3.1 Home** ==
250 -
251 -
252 252  //Shows the system running status~://
253 253  
239 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
254 254  
255 -== **3.2 LoRa Settings** ==
256 256  
242 +== 3.2 LoRa Settings ==
257 257  
258 -=== **3.2.1 LoRa ~-~-> LoRa** ===
244 +=== 3.2.1 LoRa ~-~-> LoRa ===
259 259  
260 260  
261 261  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -262,95 +262,123 @@
262 262  
263 263  //Different LPS8v2 hardware versions can support different frequency ranges~://
264 264  
265 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
251 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
266 266  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
267 267  
268 268  (% class="wikigeneratedid" %)
269 269  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
270 270  
257 +
271 271  (% class="wikigeneratedid" %)
272 272  [[image:image-20220616110739-1.png||height="372" width="682"]]
273 273  
274 274  
275 275  (((
276 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
263 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
277 277  )))
278 278  
279 279  
267 +== 3.3 LoRaWAN Settings ==
280 280  
281 -== **3.3 LoRaWAN Settings** ==
269 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
282 282  
283 283  
284 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
285 -
286 -
287 287  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
288 288  
274 +
289 289  [[image:image-20220616111932-2.png||height="516" width="672"]]
290 290  
291 291  
278 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
292 292  
293 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
294 294  
295 -
296 296  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
297 297  
283 +
298 298  [[image:image-20220616113246-3.png||height="396" width="672"]]
299 299  
300 300  
301 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
287 +(((
288 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
289 +)))
302 302  
303 303  
292 +== 3.4 Network Settings ==
304 304  
305 -== **3.4 Network Settings** ==
294 +=== 3.4.1 Network ~-~-> WiFi ===
306 306  
307 307  
308 -=== **3.4.1 Network ~-~-> WiFi** ===
297 +[[image:image-20220616114756-4.png||height="251" width="669"]]
309 309  
310 310  
311 -[[image:image-20220616114756-4.png||height="251" width="669"]]
300 +=== 3.4.2 Network ~-~-> System Status ===
312 312  
313 313  
303 +[[image:image-20220820134112-2.png||height="539" width="668"]]
314 314  
315 -=== **3.4.2 Network ~-~-> System Status** ===
316 316  
306 +=== 3.4.3 Network ~-~-> Firewall ===
317 317  
318 -[[image:image-20220616115229-5.png||height="548" width="665"]]
319 319  
309 +[[image:image-20220616115351-6.png||height="244" width="661"]]
320 320  
321 321  
322 -=== **3.4.3 Network ~-~-> Firewall** ===
312 +== 3.5 System ==
323 323  
314 +=== 3.5.1  System ~-~-> System Overview ===
324 324  
325 -[[image:image-20220616115351-6.png||height="244" width="661"]]
326 326  
317 +Shows the system info:
327 327  
319 +[[image:image-20220917144512-5.png||height="618" width="853"]]
328 328  
329 -== **3.5 System** ==
330 330  
322 +=== 3.5.2 System ~-~-> Backup/Restore ===
331 331  
332 -=== **3.5.1  System ~-~-> System Overview** ===
333 333  
325 +[[image:image-20220917144725-6.png||height="208" width="869"]]
334 334  
335 -Shows the system info:
336 336  
328 +=== 3.5.3 System ~-~-> Remoteit ===
337 337  
338 338  
339 -=== **3.5.2 System ~-~-> Backup/Restore** ===
331 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
340 340  
341 341  
342 -[[image:image-20220616115808-7.png||height="194" width="649"]]
334 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
343 343  
336 +[[image:image-20221230092303-2.png]]
344 344  
345 345  
346 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
339 += 4. Build-in Server =
347 347  
348 348  
349 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
342 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
350 350  
351 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
352 352  
345 +[[image:image-20220820115644-1.png||height="217" width="778"]]
353 353  
347 +
348 +(% style="color:red" %)**Note:**
349 +
350 + **Path**: System ~-~-> Built-in Server
351 +
352 +
353 +**Troubleshooting:**
354 +
355 +
356 +**~ 1. URL does not jump properly**
357 +
358 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
359 +
360 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
361 +
362 +
363 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
364 +
365 +
366 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
367 +
354 354  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
355 355  
356 356  
... ... @@ -364,52 +364,189 @@
364 364  [[image:image-20220725171719-1.png||height="570" width="769"]]
365 365  
366 366  
367 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
368 - You can complete the installation manually with the following command.**
381 +== 4.2 Application Server ~-~- Node-Red ==
369 369  
370 370  
384 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
385 +
386 +
387 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
388 +
389 +
390 +[[image:image-20220725172124-3.png||height="610" width="843"]]
391 +
392 +
393 +
394 +=== **Using Node-Red, InfluxDB and Grafana** ===
395 +
396 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
397 +
398 +
399 +the users can refer to this link to install them.
400 +
401 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
402 +
403 +
404 += 5. How users can access LPS8v2 using serial USB =
405 +
406 +
407 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
408 +
409 +
410 +Port 1 of the UART on the LPS8v2 is GND
411 +
371 371  (% class="box infomessage" %)
372 372  (((
373 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
414 +**TXD  <~-~--> UART RXD (Gray line)**
374 374  
375 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
416 +**RXD  <~-~--> UART TXD (White line)**
417 +
418 +**GND <~-~--> GND (Black line)**
376 376  )))
377 377  
378 378  
422 +**LPS8v2 UART connection photo**
379 379  
380 -= **5. Build-in Application Server ~-~- Node-Red** =
424 +[[image:image-20220804163015-1.png||height="621" width="466"]]
381 381  
382 382  
383 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
384 384  
385 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
428 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
386 386  
387 387  
388 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
431 +[[image:image-20220804164928-3.png||height="320" width="332"]]
389 389  
390 390  
391 -[[image:image-20220725172124-3.png||height="610" width="843"]]
434 +[[image:image-20220804164747-2.png||height="622" width="594"]]
392 392  
393 393  
394 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
395 - You can complete the installation manually with the following command.**
437 += 6. Use the helium gateway-rs as the Data-only Hotspot =
396 396  
397 397  
440 +== **Step 1: Configure Frequency Band** ==
398 398  
442 +
443 +//Each country has a requirement for frequency region. Choose the right one for your area.//
444 +
445 +[[image:image-20220905164308-1.png]]
446 +
447 +
448 +
449 +== **Step 2: Configure the forward address** ==
450 +
451 +
452 +**Select one of the servers to configure.**
453 +
454 +**For example:**
455 +
456 +[[image:image-20220905164847-2.png]]
457 +
458 +
459 +
460 +== **Step 3: Download and Install the Helium-gateway-rs** ==
461 +
462 +
463 +**Access the gateway CLI via SSH.**
464 +
465 +[[image:image-20220905165222-3.png]]
466 +
467 +
468 +**Download gateway-rs.**
469 +
470 +[[image:image-20220905165715-5.png]]
471 +
399 399  (% class="box infomessage" %)
400 400  (((
401 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
474 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
403 403  )))
404 404  
405 -[[image:image-20220728102000-1.png]]
406 406  
478 +**Install gateway-rs.**
407 407  
480 +[[image:image-20220905165917-7.png]]
408 408  
409 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
482 +(% class="box infomessage" %)
483 +(((
484 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
485 +)))
410 410  
411 411  
488 +**Modify configuration.**
489 +
490 +
491 +[[image:image-20220905173847-12.png]]
492 +
493 +
494 +(% class="box infomessage" %)
412 412  (((
496 +**region=<Enter regional parameters> \
497 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
498 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
499 +)))
500 +
501 +
502 +**Restart the helium_gateway**
503 +
504 +[[image:image-20220905170920-9.png]]
505 +
506 +
507 +(% class="box infomessage" %)
508 +(((
509 +**systemctl restart helium_gateway**
510 +)))
511 +
512 +
513 +**Check the helium_gateway Log：**
514 +
515 +[[image:image-20220905173952-13.png]]
516 +
517 +
518 +(% class="box infomessage" %)
519 +(((
520 +**journalctl -u helium_gateway -f**
521 +)))
522 +
523 +
524 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
525 +
526 +where the helium gateway log is shown:
527 +
528 +[[image:image-20220905174534-14.png]]
529 +
530 +
531 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
532 +
533 +
534 += 7. OTA System Update =
535 +
536 +
537 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
538 +
539 +
540 += 8. Trouble Shooting =
541 +
542 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
543 +
544 +
545 +[[image:image-20220920135918-1.png]]
546 +
547 +
548 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
549 +
550 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
551 +
552 +
553 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
554 +
555 +**Click the update URL button to configure the URL with the current eth port address.**
556 +
557 +[[image:image-20220920141936-2.png]]
558 +
559 +
560 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
561 +
562 +
563 +(((
413 413  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
414 414  )))
415 415  
... ... @@ -417,16 +417,16 @@
417 417  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
418 418  
419 419  
571 += 10. Reference =
420 420  
421 -= **11 Reference** =
422 422  
423 -
424 424  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
575 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
425 425  
426 426  
427 427  )))
428 428  
429 -= **12. Order Info** =
580 += 11. Order Info =
430 430  
431 431  
432 432  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -440,7 +440,6 @@
440 440  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
441 441  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
442 442  
443 -
444 444  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
445 445  
446 446  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -451,10 +451,9 @@
451 451  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
452 452  
453 453  
604 += 12. Manufacturer Info =
454 454  
455 -= **13. Manufacturer Info** =
456 456  
457 -
458 458  **Shenzhen Dragino Technology Development co. LTD**
459 459  
460 460  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -462,23 +462,38 @@
462 462  LongCheng Street, LongGang District ; Shenzhen 518116,China
463 463  
464 464  
614 += 13. FCC Warning =
465 465  
466 -= **14. FCC Warning** =
467 467  
468 -
617 +(((
469 469  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
619 +)))
470 470  
621 +(((
471 471  ~-~- Reorient or relocate the receiving antenna.
623 +)))
472 472  
625 +(((
473 473  ~-~- Increase the separation between the equipment and receiver.
627 +)))
474 474  
629 +(((
475 475  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
631 +)))
476 476  
633 +(((
477 477  ~-~- Consult the dealer or an experienced radio/TV technician for help.
635 +)))
478 478  
479 479  
638 +(((
480 480  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
640 +)))
481 481  
482 482  
643 +(((
483 483  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
645 +
646 +
484 484  )))
648 +)))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0