Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 69.7 >
edited by Xiaoling
on 2022/07/28 17:49
To version < 118.1 >
edited by Kilight Cao
on 2022/12/30 09:22
>
Change comment: Uploaded new attachment "image-20221230092248-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,8 +50,6 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,8 +58,6 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 65  * Work Temperature: -20 ~~ 65°C
... ... @@ -68,11 +68,9 @@
68 68  
69 69  
70 70  
69 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -88,57 +88,72 @@
88 88  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
89 89  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
90 90  
91 -== **1.4 Block Diagram** ==
92 92  
93 93  
89 +== 1.4 Block Diagram ==
94 94  
95 -== **1.5 LED Indicators** ==
96 96  
97 97  
93 +== 1.5 LED Indicators ==
94 +
95 +
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 101  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
103 103  
104 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
105 105  
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
108 108  
109 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
109 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
112 112  
113 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
114 114  
114 +== 1.6 Button Intruction ==
115 115  
116 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
117 117  
117 +LPS8-V2 has a black toggle button, which is:
118 118  
119 119  
120 -= **2. Quick Start** =
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
122 122  
123 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
124 124  
125 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 126  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
127 127  
128 128  
129 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
130 += 2. Quick Start =
130 130  
131 131  
132 -== **2.1.1 connect the network.** ==
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
133 133  
134 -=== ===
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
135 135  
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
136 136  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
137 137  
138 138  
146 +(((
139 139  Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 +)))
140 140  
150 +(((
141 141  You can also use this IP to connect.
152 +)))
142 142  
143 143  [[image:image-20220622100129-1.png||height="332" width="1263"]]
144 144  
... ... @@ -150,25 +150,6 @@
150 150  [[image:image-20220622100542-2.png||height="369" width="1256"]]
151 151  
152 152  
153 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
154 -
155 -
156 -
157 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
158 -
159 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
160 -
161 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
162 -
163 -[[image:image-20220622101433-4.png]]
164 -
165 -
166 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
167 -
168 -
169 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
170 -
171 -
172 172  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
173 173  
174 174  
... ... @@ -182,30 +182,32 @@
182 182  [[image:image-20220622102847-7.png]]
183 183  
184 184  
185 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
186 186  
187 187  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
188 188  
189 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
190 190  
191 191  
192 -=== **2.2.1 Select your area frequency** ===
193 -
194 -
185 +(((
195 195  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
196 196  
197 -[[image:image-20220622103332-9.png]]
188 +
189 +)))
198 198  
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
199 199  
200 200  
201 -=== **2.2.2 Get the only gateway EUI** ===
194 +=== 2.2.2 Get the only gateway EUI ===
202 202  
203 203  
204 204  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
205 205  
206 -[[image:image-20220622103355-10.png]]
207 207  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
208 208  
202 +
209 209  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
210 210  
211 211  
... ... @@ -221,7 +221,6 @@
221 221  [[image:image-20220622103956-12.png]]
222 222  
223 223  
224 -
225 225  == 2.2.3 Register the gateway to The Things Network ==
226 226  
227 227  
... ... @@ -238,20 +238,19 @@
238 238  **Get it online**
239 239  
240 240  
234 += 3. Web Configure Pages =
241 241  
242 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
243 243  
244 244  
245 -== **3.1 Home** ==
246 -
247 -
248 248  //Shows the system running status~://
249 249  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
250 250  
251 -== **3.2 LoRa Settings** ==
252 252  
244 +== 3.2 LoRa Settings ==
253 253  
254 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
255 255  
256 256  
257 257  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -258,95 +258,112 @@
258 258  
259 259  //Different LPS8v2 hardware versions can support different frequency ranges~://
260 260  
261 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
253 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
262 262  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
263 263  
264 264  (% class="wikigeneratedid" %)
265 265  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
266 266  
259 +
267 267  (% class="wikigeneratedid" %)
268 268  [[image:image-20220616110739-1.png||height="372" width="682"]]
269 269  
270 270  
271 271  (((
272 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
273 273  )))
274 274  
275 275  
269 +== 3.3 LoRaWAN Settings ==
276 276  
277 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
278 278  
279 279  
280 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
281 -
282 -
283 283  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
284 284  
276 +
285 285  [[image:image-20220616111932-2.png||height="516" width="672"]]
286 286  
287 287  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
288 288  
289 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
290 290  
291 -
292 292  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
293 293  
285 +
294 294  [[image:image-20220616113246-3.png||height="396" width="672"]]
295 295  
296 296  
297 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
289 +(((
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
291 +)))
298 298  
299 299  
294 +== 3.4 Network Settings ==
300 300  
301 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
302 302  
303 303  
304 -=== **3.4.1 Network ~-~-> WiFi** ===
299 +[[image:image-20220616114756-4.png||height="251" width="669"]]
305 305  
306 306  
307 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== 3.4.2 Network ~-~-> System Status ===
308 308  
309 309  
305 +[[image:image-20220820134112-2.png||height="539" width="668"]]
310 310  
311 -=== **3.4.2 Network ~-~-> System Status** ===
312 312  
308 +=== 3.4.3 Network ~-~-> Firewall ===
313 313  
314 -[[image:image-20220616115229-5.png||height="548" width="665"]]
315 315  
311 +[[image:image-20220616115351-6.png||height="244" width="661"]]
316 316  
317 317  
318 -=== **3.4.3 Network ~-~-> Firewall** ===
314 +== 3.5 System ==
319 319  
316 +=== 3.5.1  System ~-~-> System Overview ===
320 320  
321 -[[image:image-20220616115351-6.png||height="244" width="661"]]
322 322  
319 +Shows the system info:
323 323  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
324 324  
325 -== **3.5 System** ==
326 326  
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
327 327  
328 -=== **3.5.1  System ~-~-> System Overview** ===
329 329  
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
330 330  
331 -Shows the system info:
332 332  
330 += 4. Build-in Server =
333 333  
334 334  
335 -=== **3.5.2 System ~-~-> Backup/Restore** ===
333 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
336 336  
337 337  
338 -[[image:image-20220616115808-7.png||height="194" width="649"]]
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
339 339  
340 340  
339 +(% style="color:red" %)**Note:**
341 341  
342 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
341 + **Path**: System ~-~-> Built-in Server
343 343  
344 344  
345 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
344 +**Troubleshooting:**
346 346  
347 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
348 348  
347 +**~ 1. URL does not jump properly**
349 349  
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
350 +
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
352 +
353 +
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
355 +
356 +
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
350 350  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
351 351  
352 352  
... ... @@ -360,52 +360,189 @@
360 360  [[image:image-20220725171719-1.png||height="570" width="769"]]
361 361  
362 362  
363 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
364 - You can complete the installation manually with the following command.**
372 +== 4.2 Application Server ~-~- Node-Red ==
365 365  
366 366  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
376 +
377 +
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
379 +
380 +
381 +[[image:image-20220725172124-3.png||height="610" width="843"]]
382 +
383 +
384 +
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
386 +
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
388 +
389 +
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
401 +Port 1 of the UART on the LPS8v2 is GND
402 +
367 367  (% class="box infomessage" %)
368 368  (((
369 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
405 +**TXD  <~-~--> UART RXD (Gray line)**
370 370  
371 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
407 +**RXD  <~-~--> UART TXD (White line)**
408 +
409 +**GND <~-~--> GND (Black line)**
372 372  )))
373 373  
374 374  
413 +**LPS8v2 UART connection photo**
375 375  
376 -= **5. Build-in Application Server ~-~- Node-Red** =
415 +[[image:image-20220804163015-1.png||height="621" width="466"]]
377 377  
378 378  
379 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
380 380  
381 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
419 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
382 382  
383 383  
384 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
422 +[[image:image-20220804164928-3.png||height="320" width="332"]]
385 385  
386 386  
387 -[[image:image-20220725172124-3.png||height="610" width="843"]]
425 +[[image:image-20220804164747-2.png||height="622" width="594"]]
388 388  
389 389  
390 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
391 - You can complete the installation manually with the following command.**
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
392 392  
393 393  
431 +== **Step 1: Configure Frequency Band** ==
394 394  
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
395 395  (% class="box infomessage" %)
396 396  (((
397 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
398 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
399 399  )))
400 400  
401 -[[image:image-20220728102000-1.png]]
402 402  
469 +**Install gateway-rs.**
403 403  
471 +[[image:image-20220905165917-7.png]]
404 404  
405 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
473 +(% class="box infomessage" %)
474 +(((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
406 406  
407 407  
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
408 408  (((
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
490 +)))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
501 +)))
502 +
503 +
504 +**Check the helium_gateway Log：**
505 +
506 +[[image:image-20220905173952-13.png]]
507 +
508 +
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
513 +
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
554 +(((
409 409  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
410 410  )))
411 411  
... ... @@ -413,16 +413,17 @@
413 413  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
414 414  
415 415  
562 += 10. Reference =
416 416  
417 -= **11 Reference** =
418 418  
419 -
420 420  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
566 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
421 421  
568 +
422 422  
423 423  )))
424 424  
425 -= **12. Order Info** =
572 += 11. Order Info =
426 426  
427 427  
428 428  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -436,7 +436,6 @@
436 436  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
437 437  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
438 438  
439 -
440 440  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
441 441  
442 442  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -447,10 +447,9 @@
447 447  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
448 448  
449 449  
596 += 12. Manufacturer Info =
450 450  
451 -= **13. Manufacturer Info** =
452 452  
453 -
454 454  **Shenzhen Dragino Technology Development co. LTD**
455 455  
456 456  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -458,23 +458,38 @@
458 458  LongCheng Street, LongGang District ; Shenzhen 518116,China
459 459  
460 460  
606 += 13. FCC Warning =
461 461  
462 -= **14. FCC Warning** =
463 463  
464 -
609 +(((
465 465  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
611 +)))
466 466  
613 +(((
467 467  ~-~- Reorient or relocate the receiving antenna.
615 +)))
468 468  
617 +(((
469 469  ~-~- Increase the separation between the equipment and receiver.
619 +)))
470 470  
621 +(((
471 471  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
623 +)))
472 472  
625 +(((
473 473  ~-~- Consult the dealer or an experienced radio/TV technician for help.
627 +)))
474 474  
475 475  
630 +(((
476 476  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
632 +)))
477 477  
478 478  
635 +(((
479 479  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
480 480  )))
640 +)))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0