Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.6 >
edited by Xiaoling
on 2022/07/28 17:27
To version < 200.1 >
edited by Kilight Cao
on 2023/05/26 11:56
>
Change comment: Uploaded new attachment "image-20230526115650-5.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,27 +13,39 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
25 +(((
22 22  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +)))
23 23  
29 +(((
24 24  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +)))
25 25  
33 +(((
26 26  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +)))
27 27  
37 +(((
28 28  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 +)))
29 29  
41 +(((
30 30  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +)))
31 31  
32 32  
46 +== 1.2 Specifications ==
33 33  
34 -== **1.2 Specifications** ==
35 35  
36 -
37 37  (% style="color:#037691" %)**Hardware System:**
38 38  
39 39  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -45,14 +45,16 @@
45 45  * 10M/100M RJ45 Ports x 1
46 46  * Multi-Channel LoRaWAN Wireless
47 47  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
48 48  
49 49  (% style="color:#037691" %)**Operating Condition:**
50 50  
51 -* Work Temperature: -20 ~~ 65°C
52 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
53 53  * Power Input: 5V, 2A, DC
54 54  
55 -== **1.3 Features** ==
69 +== 1.3 Features ==
56 56  
57 57  
58 58  * Open Source Debian system
... ... @@ -70,11 +70,11 @@
70 70  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
71 71  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
72 72  
73 -== **1.4 Block Diagram** ==
87 +== 1.4 Block Diagram ==
74 74  
75 75  
76 76  
77 -== **1.5 LED Indicators** ==
91 +== 1.5 LED Indicators ==
78 78  
79 79  
80 80  LPS8-V2 has totally four LEDs, They are:
... ... @@ -82,75 +82,100 @@
82 82  
83 83  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
84 84  
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
85 85  
86 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
87 87  
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
88 88  
89 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
90 90  
91 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
92 92  
93 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
94 94  
95 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
96 96  
112 +== 1.6 Button Intruction ==
97 97  
98 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
99 99  
115 +LPS8-V2 has a black toggle button, which is:
100 100  
101 101  
102 -= **2. Quick Start** =
118 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
103 103  
120 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
104 104  
105 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
106 106  
107 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
123 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
108 108  
125 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
109 109  
110 110  
111 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
128 += 2. Quick Start =
112 112  
113 113  
114 -== **2.1.1 connect the network.** ==
131 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
115 115  
116 -=== ===
133 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
117 117  
118 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
119 119  
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
120 120  
121 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
138 +=== 2.1.1 connect the network ===
122 122  
140 +
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
142 +
143 +
144 +(((
145 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 +)))
147 +
148 +(((
123 123  You can also use this IP to connect.
150 +)))
124 124  
125 125  [[image:image-20220622100129-1.png||height="332" width="1263"]]
126 126  
127 127  
128 128  
129 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
130 130  
131 131  
132 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
159 +[[image:image-20230107084650-2.png||height="310" width="839"]]
133 133  
134 134  
135 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
162 +(% style="color:blue" %)**Steps to connect via fallback IP:**
136 136  
164 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
137 137  
166 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
138 138  
139 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
140 140  
141 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
169 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
142 142  
143 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
144 144  
145 -[[image:image-20220622101433-4.png]]
172 +As in the below photo:
146 146  
174 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
147 147  
148 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
149 149  
177 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
150 150  
151 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
179 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
152 152  
153 153  
182 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
183 +
184 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
185 +
186 +
187 +
188 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
189 +
190 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
191 +
192 +
154 154  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155 155  
156 156  
... ... @@ -164,30 +164,122 @@
164 164  [[image:image-20220622102847-7.png]]
165 165  
166 166  
167 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
206 +[[image:image-20220622102901-8.png||height="476" width="938"]]
168 168  
169 169  
209 +=== 2.1.2 Access Configure Web UI ===
170 170  
171 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
172 172  
212 +**Web Interface**
173 173  
174 -=== **2.2.1 Select your area frequency** ===
214 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
175 175  
176 176  
217 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
218 +
219 +You will see the login interface of LPS8-V2 as shown below.
220 +
221 +The account details for Web Login are:
222 +
223 +(% style="color:#4f81bd" %)**User Name: root**
224 +
225 +(% style="color:#4f81bd" %)**Password:   dragino**
226 +
227 +[[image:image-20230106153501-1.png||height="367" width="894"]]
228 +
229 +
230 +== 2.2  Typical Network Setup ==
231 +
232 +=== 2.2.1  Overview ===
233 +
234 +
235 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
236 +
237 +* **WAN Port Internet Mode**
238 +* **WiFi Client Mode**
239 +* **Cellular Mode**
240 +
241 +=== 2.2.2  Use WAN port to access Internet ===
242 +
243 +
244 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
245 +
246 +
247 +[[image:image-20230411100633-2.png||height="501" width="935"]]
248 +
249 +
250 +=== 2.2.3  Access the Internet as a WiFi Client ===
251 +
252 +
253 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
254 +
255 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
256 +
257 +[[image:image-20230411095739-1.png||height="264" width="691"]]
258 +
259 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
260 +
261 +
262 +=== 2.2.4  Use built-in 4G modem for internet access ===
263 +
264 +
265 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
266 +
267 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
268 +
269 +
270 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
271 +
272 +First, install the Micro SIM card as below direction
273 +
274 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
275 +
276 +
277 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
278 +
279 +
280 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
281 +
282 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
283 +
284 +
285 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
286 +
287 +
288 +=== 2.2.5  Check Internet connection ===
289 +
290 +In the **home** page, we can check the Internet connection.
291 +
292 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
293 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
294 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
295 +
296 +[[image:image-20230411101534-3.png||height="544" width="942"]]
297 +
298 +
299 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
300 +
301 +=== 2.3.1 Select your area frequency ===
302 +
303 +
304 +(((
177 177  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
178 178  
179 -[[image:image-20220622103332-9.png]]
307 +
308 +)))
180 180  
310 +[[image:image-20220622103332-9.png||height="485" width="938"]]
181 181  
182 182  
183 -=== **2.2.2 Get the only gateway EUI** ===
313 +=== 2.3.2 Get the only gateway EUI ===
184 184  
185 185  
186 186  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
187 187  
188 -[[image:image-20220622103355-10.png]]
189 189  
319 +[[image:image-20220622103355-10.png||height="698" width="949"]]
190 190  
321 +
191 191  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
192 192  
193 193  
... ... @@ -203,10 +203,9 @@
203 203  [[image:image-20220622103956-12.png]]
204 204  
205 205  
337 +=== 2.3.3 Register the gateway to The Things Network ===
206 206  
207 -== 2.2.3 Register the gateway to The Things Network ==
208 208  
209 -
210 210  **Login to The Things Network**
211 211  
212 212  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -220,20 +220,19 @@
220 220  **Get it online**
221 221  
222 222  
353 += 3. Web Configure Pages =
223 223  
224 -= **3. Web Configure Pages** =
355 +== 3.1 Home ==
225 225  
226 226  
227 -== **3.1 Home** ==
228 -
229 -
230 230  //Shows the system running status~://
231 231  
360 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
232 232  
233 -== **3.2 LoRa Settings** ==
234 234  
363 +== 3.2 LoRa Settings ==
235 235  
236 -=== **3.2.1 LoRa ~-~-> LoRa** ===
365 +=== 3.2.1 LoRa ~-~-> LoRa ===
237 237  
238 238  
239 239  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -240,95 +240,158 @@
240 240  
241 241  //Different LPS8v2 hardware versions can support different frequency ranges~://
242 242  
243 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
372 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
244 244  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
245 245  
246 246  (% class="wikigeneratedid" %)
247 247  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
248 248  
378 +
249 249  (% class="wikigeneratedid" %)
250 250  [[image:image-20220616110739-1.png||height="372" width="682"]]
251 251  
252 252  
253 253  (((
254 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
384 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
255 255  )))
256 256  
257 257  
388 +== 3.3 LoRaWAN Settings ==
258 258  
259 -== **3.3 LoRaWAN Settings** ==
390 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
260 260  
261 261  
262 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
263 -
264 -
265 265  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
266 266  
395 +
267 267  [[image:image-20220616111932-2.png||height="516" width="672"]]
268 268  
269 269  
399 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
270 270  
271 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
272 272  
273 -
274 274  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
275 275  
404 +
276 276  [[image:image-20220616113246-3.png||height="396" width="672"]]
277 277  
278 278  
279 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
408 +(((
409 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
410 +)))
280 280  
281 281  
413 +== 3.4 Network Settings ==
282 282  
283 -== **3.4 Network Settings** ==
415 +=== 3.4.1 Network ~-~-> WiFi ===
284 284  
285 285  
286 -=== **3.4.1 Network ~-~-> WiFi** ===
418 +[[image:image-20220616114756-4.png||height="251" width="669"]]
287 287  
288 288  
289 -[[image:image-20220616114756-4.png||height="251" width="669"]]
421 +=== 3.4.2 Network ~-~-> System Status ===
290 290  
291 291  
424 +[[image:image-20220820134112-2.png||height="539" width="668"]]
292 292  
293 -=== **3.4.2 Network ~-~-> System Status** ===
294 294  
427 +=== 3.4.3 Network ~-~-> Network ===
295 295  
296 -[[image:image-20220616115229-5.png||height="548" width="665"]]
297 297  
430 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
298 298  
432 +[[image:image-20230214093657-2.png||height="333" width="858"]]
299 299  
300 -=== **3.4.3 Network ~-~-> Firewall** ===
301 301  
435 +=== 3.4.4 Network ~-~-> Cellular ===
302 302  
303 -[[image:image-20220616115351-6.png||height="244" width="661"]]
304 304  
438 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
305 305  
440 +(% style="color:red" %)**Note: APN cannot be empty.**
306 306  
307 -== **3.5 System** ==
442 +[[image:image-20230228115126-1.png]]
308 308  
309 309  
310 -=== **3.5.1  System ~-~-> System Overview** ===
445 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
311 311  
447 +[[image:image-20230228115535-2.png||height="478" width="888"]]
312 312  
449 +
450 +== 3.5 System ==
451 +
452 +=== 3.5.1 System ~-~-> System Overview ===
453 +
454 +
313 313  Shows the system info:
314 314  
457 +[[image:image-20220917144512-5.png||height="618" width="853"]]
315 315  
316 316  
317 -=== **3.5.2 System ~-~-> Backup/Restore** ===
460 +=== 3.5.2 System ~-~-> System General ===
318 318  
319 319  
320 -[[image:image-20220616115808-7.png||height="194" width="649"]]
463 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
321 321  
465 +In addition, Users can customize the FallBack IP address.
322 322  
467 +[[image:image-20230214094058-3.png]]
323 323  
324 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
325 325  
470 +=== 3.5.3 System ~-~-> Backup/Restore ===
326 326  
327 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
328 328  
329 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
473 +[[image:image-20220917144725-6.png||height="208" width="869"]]
330 330  
331 331  
476 +=== 3.5.4 System ~-~-> Remoteit ===
477 +
478 +
479 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
480 +
481 +
482 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
483 +
484 +[[image:image-20221230092303-2.png]]
485 +
486 +
487 +=== 3.5.5 System ~-~-> Package Management ===
488 +
489 +
490 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
491 +
492 +[[image:image-20230214094316-4.png]]
493 +
494 +
495 += 4. Build-in Server =
496 +
497 +
498 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
499 +
500 +
501 +[[image:image-20230214095318-5.png||height="347" width="980"]]
502 +
503 +
504 +(% style="color:red" %)**Note:**
505 +
506 + **Path**: System ~-~-> Built-in Server
507 +
508 +
509 +**Troubleshooting:**
510 +
511 +
512 +**~ 1. URL does not jump properly**
513 +
514 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
515 +
516 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
517 +
518 +
519 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
520 +
521 +
522 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
523 +
332 332  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
333 333  
334 334  
... ... @@ -342,52 +342,313 @@
342 342  [[image:image-20220725171719-1.png||height="570" width="769"]]
343 343  
344 344  
345 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
346 - You can complete the installation manually with the following command.**
537 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
347 347  
348 348  
540 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
541 +
542 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
543 +
544 +[[image:image-20230321092456-1.png]]
545 +
546 +
547 +== 4.2 Application Server ~-~- Node-Red ==
548 +
549 +
550 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
551 +
552 +
553 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
554 +
555 +
556 +[[image:image-20220725172124-3.png||height="610" width="843"]]
557 +
558 +
559 +
560 +=== **Using Node-Red, InfluxDB and Grafana** ===
561 +
562 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
563 +
564 +
565 +the users can refer to this link to install them.
566 +
567 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
568 +
569 +
570 +=== **Upgrade the node.js** ===
571 +
572 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
573 +
574 +
575 +the users can refer to this link to upgrade them.
576 +
577 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
578 +
579 +
580 +== 4.3 How to disable the built-in server ==
581 +
582 +
583 +Use the following commands to start and stop the TTNv3 service:
584 +
349 349  (% class="box infomessage" %)
350 350  (((
351 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
587 +**# start**
588 +systemctl start ttnstack
352 352  
353 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
590 +**# stop**
591 +systemctl stop ttnstack
592 +
593 +**# enable**
594 +systemctl enable ttnstack
595 +
596 +**#disable**
597 +systemctl disable ttnstack
354 354  )))
355 355  
600 +Use the following commands to start and stop the Node-Red service:
356 356  
602 +(% class="box infomessage" %)
603 +(((
604 +**# start**
605 +systemctl start nodered
357 357  
358 -= **5. Build-in Application Server ~-~- Node-Red** =
607 +**# stop**
608 +systemctl stop nodered
359 359  
610 +**# enable**
611 +systemctl enable nodered
360 360  
361 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
613 +**#disable**
614 +systemctl disable nodered
615 +)))
362 362  
363 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
364 364  
618 +== 4.4 How to use ChirpStack on LPS8-V2 ==
365 365  
366 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
367 367  
621 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
368 368  
369 -[[image:image-20220725172124-3.png||height="610" width="843"]]
623 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
370 370  
625 +[[image:image-20230222094908-1.png||height="133" width="798"]]
371 371  
372 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
373 - You can complete the installation manually with the following command.**
374 374  
628 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
375 375  
376 376  
631 +
632 += 6. How users can access LPS8-V2 using serial USB =
633 +
634 +
635 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
636 +
637 +
638 +Port 1 of the UART on the LPS8-V2 is GND
639 +
377 377  (% class="box infomessage" %)
378 378  (((
379 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
380 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
642 +**TXD  <~-~--> UART RXD (Gray line)**
643 +
644 +**RXD  <~-~--> UART TXD (White line)**
645 +
646 +**GND <~-~--> GND (Black line)**
381 381  )))
382 382  
383 -[[image:image-20220728102000-1.png]]
384 384  
650 +**LPS8v2 UART connection photo**
385 385  
386 386  
387 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
653 +[[image:image-20230421094319-2.png||height="351" width="392"]]
388 388  
655 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
389 389  
657 +
658 +[[image:image-20220804164928-3.png||height="320" width="332"]]
659 +
660 +
661 +[[image:image-20220804164747-2.png||height="622" width="594"]]
662 +
663 +
664 += 7. Use the helium gateway-rs as the Data-only Hotspot =
665 +
666 +
667 +== **Step 1: Configure Frequency Band** ==
668 +
669 +
670 +//Each country has a requirement for frequency region. Choose the right one for your area.//
671 +
672 +[[image:image-20220905164308-1.png]]
673 +
674 +
675 +
676 +== **Step 2: Configure the forward address** ==
677 +
678 +
679 +**Select one of the servers to configure.**
680 +
681 +**For example:**
682 +
683 +[[image:image-20220905164847-2.png]]
684 +
685 +
686 +
687 +== **Step 3: Download and Install the Helium-gateway-rs** ==
688 +
689 +
690 +**Access the gateway CLI via SSH.**
691 +
692 +[[image:image-20230425153417-2.png]]
693 +
694 +
695 +**Install the new gateway-rs**
696 +
697 +(% class="box infomessage" %)
390 390  (((
699 +**apt update && apt install helium-gateway**
700 +)))
701 +
702 +[[image:image-20230425154058-4.png]]
703 +
704 +
705 +
706 +Option: If you installed the older gateway-rs, you have clean it
707 +
708 +(% class="box infomessage" %)
709 +(((
710 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
711 +)))
712 +
713 +[[image:image-20230425153823-3.png]]
714 +
715 +
716 +**Change the region setting:**
717 +
718 +
719 +(% class="box infomessage" %)
720 +(((
721 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
722 +
723 +
724 +**e.g: **
725 +
726 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
727 +
728 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
729 +)))
730 +
731 +
732 +**Restart the gateway-rs**
733 +
734 +(% class="box infomessage" %)
735 +(((
736 +**systemctl restart helium_gateway**
737 +)))
738 +
739 +[[image:image-20230425155612-7.png||height="265" width="911"]]
740 +
741 +
742 +
743 +**Check the helium_gateway running status**
744 +
745 +
746 +(% class="box infomessage" %)
747 +(((
748 +**systemctl status helium_gateway**
749 +)))
750 +
751 +
752 +[[image:image-20230425154740-5.png]]
753 +
754 +
755 +
756 +**Check the helium_gateway Log：**
757 +
758 +(% class="box infomessage" %)
759 +(((
760 +**journalctl -u helium_gateway -f**
761 +)))
762 +
763 +
764 +[[image:image-20230425155659-8.png]]
765 +
766 +
767 += 8. OTA System Update =
768 +
769 +
770 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
771 +
772 +
773 +
774 += 9. FAQ =
775 +
776 +== 9.1 How to change Hostname ==
777 +
778 +
779 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
780 +
781 +(% class="box infomessage" %)
782 +(((
783 +hostnamectl set-hostname dragino-123456
784 +)))
785 +
786 +[[image:image-20230517102429-1.png]]
787 +
788 +After the configuration is complete, run "reboot" to restart the gateway.
789 +
790 +
791 += 10. Trouble Shooting =
792 +
793 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
794 +
795 +
796 +[[image:image-20220920135918-1.png]]
797 +
798 +
799 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
800 +
801 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
802 +
803 +
804 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
805 +
806 +**Click the update URL button to configure the URL with the current eth port address.**
807 +
808 +[[image:image-20220920141936-2.png]]
809 +
810 +
811 +== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
812 +
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 +
815 +[[image:image-20230508171607-1.png]]
816 +
817 +
818 +== 10.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
841 +
842 +
843 +(((
391 391  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
392 392  )))
393 393  
... ... @@ -395,16 +395,16 @@
395 395  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
396 396  
397 397  
851 += 12. Reference =
398 398  
399 -= **11 Reference** =
400 400  
401 -
402 402  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
855 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
403 403  
404 404  
405 405  )))
406 406  
407 -= **12. Order Info** =
860 += 13. Order Info =
408 408  
409 409  
410 410  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -418,7 +418,6 @@
418 418  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
419 419  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
420 420  
421 -
422 422  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
423 423  
424 424  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -429,10 +429,9 @@
429 429  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
430 430  
431 431  
884 += 14. Manufacturer Info =
432 432  
433 -= **13. Manufacturer Info** =
434 434  
435 -
436 436  **Shenzhen Dragino Technology Development co. LTD**
437 437  
438 438  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -440,23 +440,38 @@
440 440  LongCheng Street, LongGang District ; Shenzhen 518116,China
441 441  
442 442  
894 += 15. FCC Warning =
443 443  
444 -= **14. FCC Warning** =
445 445  
446 -
897 +(((
447 447  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
899 +)))
448 448  
901 +(((
449 449  ~-~- Reorient or relocate the receiving antenna.
903 +)))
450 450  
905 +(((
451 451  ~-~- Increase the separation between the equipment and receiver.
907 +)))
452 452  
909 +(((
453 453  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
911 +)))
454 454  
913 +(((
455 455  ~-~- Consult the dealer or an experienced radio/TV technician for help.
915 +)))
456 456  
457 457  
918 +(((
458 458  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
920 +)))
459 459  
460 460  
923 +(((
461 461  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
925 +
926 +
462 462  )))
928 +)))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0