Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.6 >
edited by Xiaoling
on 2022/07/28 17:27
To version < 123.1 >
edited by Kilight Cao
on 2023/01/06 15:35
>
Change comment: Uploaded new attachment "image-20230106153501-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,27 +13,39 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
25 +(((
22 22  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +)))
23 23  
29 +(((
24 24  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +)))
25 25  
33 +(((
26 26  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +)))
27 27  
37 +(((
28 28  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 +)))
29 29  
41 +(((
30 30  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +)))
31 31  
32 32  
46 +== 1.2 Specifications ==
33 33  
34 -== **1.2 Specifications** ==
35 35  
36 -
37 37  (% style="color:#037691" %)**Hardware System:**
38 38  
39 39  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,7 +52,7 @@
52 52  * Storage Temperature: -20 ~~ 65°C
53 53  * Power Input: 5V, 2A, DC
54 54  
55 -== **1.3 Features** ==
67 +== 1.3 Features ==
56 56  
57 57  
58 58  * Open Source Debian system
... ... @@ -70,57 +70,71 @@
70 70  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
71 71  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
72 72  
73 -== **1.4 Block Diagram** ==
74 74  
86 +== 1.4 Block Diagram ==
75 75  
76 76  
77 -== **1.5 LED Indicators** ==
78 78  
90 +== 1.5 LED Indicators ==
79 79  
92 +
80 80  LPS8-V2 has totally four LEDs, They are:
81 81  
82 82  
83 83  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
84 84  
98 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
85 85  
86 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
100 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
87 87  
102 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
88 88  
89 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
90 90  
91 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
92 92  
93 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
94 94  
95 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
96 96  
111 +== 1.6 Button Intruction ==
97 97  
98 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
99 99  
114 +LPS8-V2 has a black toggle button, which is:
100 100  
101 101  
102 -= **2. Quick Start** =
117 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
103 103  
119 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
104 104  
105 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
106 106  
107 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
122 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
108 108  
124 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
109 109  
110 110  
111 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
127 += 2. Quick Start =
112 112  
113 113  
114 -== **2.1.1 connect the network.** ==
130 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
115 115  
116 -=== ===
132 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
117 117  
134 +
135 +== 2.1 Connects to the network and accesses the gateway Web UI ==
136 +
137 +== 2.1.1 connect the network ==
138 +
139 +
118 118  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
119 119  
120 120  
121 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
143 +(((
144 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 +)))
122 122  
147 +(((
123 123  You can also use this IP to connect.
149 +)))
124 124  
125 125  [[image:image-20220622100129-1.png||height="332" width="1263"]]
126 126  
... ... @@ -132,62 +132,65 @@
132 132  [[image:image-20220622100542-2.png||height="369" width="1256"]]
133 133  
134 134  
135 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
161 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
136 136  
137 137  
164 +[[image:image-20220622102702-6.png]]
138 138  
139 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
140 140  
141 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
142 142  
143 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
168 +**Wi-Fi configuration successful**
144 144  
145 -[[image:image-20220622101433-4.png]]
146 146  
171 +[[image:image-20220622102847-7.png]]
147 147  
148 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
149 149  
174 +[[image:image-20220622102901-8.png||height="476" width="938"]]
150 150  
151 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
152 152  
177 +=== 2.1.2 Access Configure Web UI ===
153 153  
154 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155 155  
180 +**Web Interface**
156 156  
157 -[[image:image-20220622102702-6.png]]
182 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
158 158  
159 159  
185 +**//http:~/~/IP_ADDRESS //**
160 160  
161 -**Wi-Fi configuration successful**
162 162  
188 +You will see the login interface of LPS8-V2 as shown below.
163 163  
164 -[[image:image-20220622102847-7.png]]
190 +The account details for Web Login are:
165 165  
192 +(% style="color:#4f81bd" %)**User Name: root**
166 166  
167 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
194 +(% style="color:#4f81bd" %)**Password:   dragino**
168 168  
169 169  
197 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
170 170  
171 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
199 +=== 2.2.1 Select your area frequency ===
172 172  
173 173  
174 -=== **2.2.1 Select your area frequency** ===
175 -
176 -
202 +(((
177 177  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
178 178  
179 -[[image:image-20220622103332-9.png]]
205 +
206 +)))
180 180  
208 +[[image:image-20220622103332-9.png||height="485" width="938"]]
181 181  
182 182  
183 -=== **2.2.2 Get the only gateway EUI** ===
211 +=== 2.2.2 Get the only gateway EUI ===
184 184  
185 185  
186 186  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
187 187  
188 -[[image:image-20220622103355-10.png]]
189 189  
217 +[[image:image-20220622103355-10.png||height="698" width="949"]]
190 190  
219 +
191 191  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
192 192  
193 193  
... ... @@ -203,7 +203,6 @@
203 203  [[image:image-20220622103956-12.png]]
204 204  
205 205  
206 -
207 207  == 2.2.3 Register the gateway to The Things Network ==
208 208  
209 209  
... ... @@ -220,20 +220,19 @@
220 220  **Get it online**
221 221  
222 222  
251 += 3. Web Configure Pages =
223 223  
224 -= **3. Web Configure Pages** =
253 +== 3.1 Home ==
225 225  
226 226  
227 -== **3.1 Home** ==
228 -
229 -
230 230  //Shows the system running status~://
231 231  
258 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
232 232  
233 -== **3.2 LoRa Settings** ==
234 234  
261 +== 3.2 LoRa Settings ==
235 235  
236 -=== **3.2.1 LoRa ~-~-> LoRa** ===
263 +=== 3.2.1 LoRa ~-~-> LoRa ===
237 237  
238 238  
239 239  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -240,95 +240,123 @@
240 240  
241 241  //Different LPS8v2 hardware versions can support different frequency ranges~://
242 242  
243 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
270 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
244 244  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
245 245  
246 246  (% class="wikigeneratedid" %)
247 247  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
248 248  
276 +
249 249  (% class="wikigeneratedid" %)
250 250  [[image:image-20220616110739-1.png||height="372" width="682"]]
251 251  
252 252  
253 253  (((
254 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
282 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
255 255  )))
256 256  
257 257  
286 +== 3.3 LoRaWAN Settings ==
258 258  
259 -== **3.3 LoRaWAN Settings** ==
288 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
260 260  
261 261  
262 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
263 -
264 -
265 265  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
266 266  
293 +
267 267  [[image:image-20220616111932-2.png||height="516" width="672"]]
268 268  
269 269  
297 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
270 270  
271 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
272 272  
273 -
274 274  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
275 275  
302 +
276 276  [[image:image-20220616113246-3.png||height="396" width="672"]]
277 277  
278 278  
279 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
306 +(((
307 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
308 +)))
280 280  
281 281  
311 +== 3.4 Network Settings ==
282 282  
283 -== **3.4 Network Settings** ==
313 +=== 3.4.1 Network ~-~-> WiFi ===
284 284  
285 285  
286 -=== **3.4.1 Network ~-~-> WiFi** ===
316 +[[image:image-20220616114756-4.png||height="251" width="669"]]
287 287  
288 288  
289 -[[image:image-20220616114756-4.png||height="251" width="669"]]
319 +=== 3.4.2 Network ~-~-> System Status ===
290 290  
291 291  
322 +[[image:image-20220820134112-2.png||height="539" width="668"]]
292 292  
293 -=== **3.4.2 Network ~-~-> System Status** ===
294 294  
325 +=== 3.4.3 Network ~-~-> Firewall ===
295 295  
296 -[[image:image-20220616115229-5.png||height="548" width="665"]]
297 297  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
298 298  
299 299  
300 -=== **3.4.3 Network ~-~-> Firewall** ===
331 +== 3.5 System ==
301 301  
333 +=== 3.5.1 System ~-~-> System Overview ===
302 302  
303 -[[image:image-20220616115351-6.png||height="244" width="661"]]
304 304  
336 +Shows the system info:
305 305  
338 +[[image:image-20220917144512-5.png||height="618" width="853"]]
306 306  
307 -== **3.5 System** ==
308 308  
341 +=== 3.5.2 System ~-~-> Backup/Restore ===
309 309  
310 -=== **3.5.1  System ~-~-> System Overview** ===
311 311  
344 +[[image:image-20220917144725-6.png||height="208" width="869"]]
312 312  
313 -Shows the system info:
314 314  
347 +=== 3.5.3 System ~-~-> Remoteit ===
315 315  
316 316  
317 -=== **3.5.2 System ~-~-> Backup/Restore** ===
350 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
318 318  
319 319  
320 -[[image:image-20220616115808-7.png||height="194" width="649"]]
353 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
321 321  
355 +[[image:image-20221230092303-2.png]]
322 322  
323 323  
324 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
358 += 4. Build-in Server =
325 325  
326 326  
327 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
361 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
328 328  
329 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
330 330  
364 +[[image:image-20220820115644-1.png||height="217" width="778"]]
331 331  
366 +
367 +(% style="color:red" %)**Note:**
368 +
369 + **Path**: System ~-~-> Built-in Server
370 +
371 +
372 +**Troubleshooting:**
373 +
374 +
375 +**~ 1. URL does not jump properly**
376 +
377 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
378 +
379 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
380 +
381 +
382 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
383 +
384 +
385 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
386 +
332 332  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
333 333  
334 334  
... ... @@ -342,52 +342,189 @@
342 342  [[image:image-20220725171719-1.png||height="570" width="769"]]
343 343  
344 344  
345 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
346 - You can complete the installation manually with the following command.**
400 +== 4.2 Application Server ~-~- Node-Red ==
347 347  
348 348  
403 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
404 +
405 +
406 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
407 +
408 +
409 +[[image:image-20220725172124-3.png||height="610" width="843"]]
410 +
411 +
412 +
413 +=== **Using Node-Red, InfluxDB and Grafana** ===
414 +
415 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
416 +
417 +
418 +the users can refer to this link to install them.
419 +
420 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
421 +
422 +
423 += 5. How users can access LPS8v2 using serial USB =
424 +
425 +
426 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
427 +
428 +
429 +Port 1 of the UART on the LPS8v2 is GND
430 +
349 349  (% class="box infomessage" %)
350 350  (((
351 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
433 +**TXD  <~-~--> UART RXD (Gray line)**
352 352  
353 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
435 +**RXD  <~-~--> UART TXD (White line)**
436 +
437 +**GND <~-~--> GND (Black line)**
354 354  )))
355 355  
356 356  
441 +**LPS8v2 UART connection photo**
357 357  
358 -= **5. Build-in Application Server ~-~- Node-Red** =
443 +[[image:image-20220804163015-1.png||height="621" width="466"]]
359 359  
360 360  
361 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
362 362  
363 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
447 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
364 364  
365 365  
366 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
450 +[[image:image-20220804164928-3.png||height="320" width="332"]]
367 367  
368 368  
369 -[[image:image-20220725172124-3.png||height="610" width="843"]]
453 +[[image:image-20220804164747-2.png||height="622" width="594"]]
370 370  
371 371  
372 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
373 - You can complete the installation manually with the following command.**
456 += 6. Use the helium gateway-rs as the Data-only Hotspot =
374 374  
375 375  
459 +== **Step 1: Configure Frequency Band** ==
376 376  
461 +
462 +//Each country has a requirement for frequency region. Choose the right one for your area.//
463 +
464 +[[image:image-20220905164308-1.png]]
465 +
466 +
467 +
468 +== **Step 2: Configure the forward address** ==
469 +
470 +
471 +**Select one of the servers to configure.**
472 +
473 +**For example:**
474 +
475 +[[image:image-20220905164847-2.png]]
476 +
477 +
478 +
479 +== **Step 3: Download and Install the Helium-gateway-rs** ==
480 +
481 +
482 +**Access the gateway CLI via SSH.**
483 +
484 +[[image:image-20220905165222-3.png]]
485 +
486 +
487 +**Download gateway-rs.**
488 +
489 +[[image:image-20220905165715-5.png]]
490 +
377 377  (% class="box infomessage" %)
378 378  (((
379 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
380 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
493 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
381 381  )))
382 382  
383 -[[image:image-20220728102000-1.png]]
384 384  
497 +**Install gateway-rs.**
385 385  
499 +[[image:image-20220905165917-7.png]]
386 386  
387 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
501 +(% class="box infomessage" %)
502 +(((
503 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
504 +)))
388 388  
389 389  
507 +**Modify configuration.**
508 +
509 +
510 +[[image:image-20220905173847-12.png]]
511 +
512 +
513 +(% class="box infomessage" %)
390 390  (((
515 +**region=<Enter regional parameters> \
516 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
517 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
518 +)))
519 +
520 +
521 +**Restart the helium_gateway**
522 +
523 +[[image:image-20220905170920-9.png]]
524 +
525 +
526 +(% class="box infomessage" %)
527 +(((
528 +**systemctl restart helium_gateway**
529 +)))
530 +
531 +
532 +**Check the helium_gateway Log：**
533 +
534 +[[image:image-20220905173952-13.png]]
535 +
536 +
537 +(% class="box infomessage" %)
538 +(((
539 +**journalctl -u helium_gateway -f**
540 +)))
541 +
542 +
543 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
544 +
545 +where the helium gateway log is shown:
546 +
547 +[[image:image-20220905174534-14.png]]
548 +
549 +
550 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
551 +
552 +
553 += 7. OTA System Update =
554 +
555 +
556 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
557 +
558 +
559 += 8. Trouble Shooting =
560 +
561 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
562 +
563 +
564 +[[image:image-20220920135918-1.png]]
565 +
566 +
567 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
568 +
569 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
570 +
571 +
572 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
573 +
574 +**Click the update URL button to configure the URL with the current eth port address.**
575 +
576 +[[image:image-20220920141936-2.png]]
577 +
578 +
579 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
580 +
581 +
582 +(((
391 391  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
392 392  )))
393 393  
... ... @@ -395,16 +395,16 @@
395 395  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
396 396  
397 397  
590 += 10. Reference =
398 398  
399 -= **11 Reference** =
400 400  
401 -
402 402  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
594 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
403 403  
404 404  
405 405  )))
406 406  
407 -= **12. Order Info** =
599 += 11. Order Info =
408 408  
409 409  
410 410  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -418,7 +418,6 @@
418 418  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
419 419  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
420 420  
421 -
422 422  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
423 423  
424 424  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -429,10 +429,9 @@
429 429  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
430 430  
431 431  
623 += 12. Manufacturer Info =
432 432  
433 -= **13. Manufacturer Info** =
434 434  
435 -
436 436  **Shenzhen Dragino Technology Development co. LTD**
437 437  
438 438  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -440,23 +440,38 @@
440 440  LongCheng Street, LongGang District ; Shenzhen 518116,China
441 441  
442 442  
633 += 13. FCC Warning =
443 443  
444 -= **14. FCC Warning** =
445 445  
446 -
636 +(((
447 447  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
638 +)))
448 448  
640 +(((
449 449  ~-~- Reorient or relocate the receiving antenna.
642 +)))
450 450  
644 +(((
451 451  ~-~- Increase the separation between the equipment and receiver.
646 +)))
452 452  
648 +(((
453 453  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
650 +)))
454 454  
652 +(((
455 455  ~-~- Consult the dealer or an experienced radio/TV technician for help.
654 +)))
456 456  
457 457  
657 +(((
458 458  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
659 +)))
459 459  
460 460  
662 +(((
461 461  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
664 +
665 +
462 462  )))
667 +)))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0