Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 5 added, 0 removed)
  • image-20220804163015-1.png
  • image-20220804164747-2.png
  • image-20220804164928-3.png
  • image-20220820115644-1.png
  • image-20220820134112-2.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Xiaoling
	1	+XWiki.Xiaoye

Content

...	...	@@ -13,21 +13,35 @@
13	13	{{toc/}}
14	14
15	15
	16	+
	17	+
	18	+
16	16	= **1. Introduction** =
17	17
	21	+
18	18	== **1.1 What is LPS8v2** ==
19	19
20	20
21	21	(((
	26	+(((
22	22	The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	28	+)))
23	23
	30	+(((
24	24	The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
	32	+)))
25	25
	34	+(((
26	26	LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
	36	+)))
27	27
	38	+(((
28	28	Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
	40	+)))
29	29
	42	+(((
30	30	LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	44	+)))
31	31
32	32
33	33
...	...	@@ -82,23 +82,34 @@
82	82
83	83	(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
84	84
	99	+(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
85	85
86		-(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
87		-
88		-
89	89	(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
90	90
91		-// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
	103	+// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
92	92
93		-// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
	105	+// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
94	94
95	95	// ✓** SOLID RED:** Device doesn't have an Internet connection.//
96	96
	109	+(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
97	97
98		-(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
99	99
	112	+== **1.6 Button Indicators** ==
100	100
101	101
	115	+LPS8-V2 has a black toggle button, which is:
	116	+
	117	+
	118	+(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
	119	+
	120	+ // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
	121	+
	122	+
	123	+(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**  **//the gateway will restore the factory settings.//
	124	+
	125	+ //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
	126	+
102	102	= **2. Quick Start** =
103	103
104	104
...	...	@@ -113,14 +113,17 @@
113	113
114	114	== **2.1.1 connect the network.** ==
115	115
116		-=== ===
117	117
118	118	=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
119	119
120	120
	145	+(((
121	121	Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
	147	+)))
122	122
	149	+(((
123	123	You can also use this IP to connect.
	151	+)))
124	124
125	125	[[image:image-20220622100129-1.png||height="332" width="1263"]]
126	126
...	...	@@ -132,16 +132,19 @@
132	132	[[image:image-20220622100542-2.png||height="369" width="1256"]]
133	133
134	134
	163	+(((
135	135	The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
	165	+)))
136	136
137	137
138	138
139	139	(% style="color:#037691" %)**Steps to connect via fallback IP:**
140	140
141		-1. Connect PC's Ethernet port to LPS8-V2's WAN port
	171	+~1. Connect PC's Ethernet port to LPS8-V2's WAN port
142	142
143	143	2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
144	144
	175	+
145	145	[[image:image-20220622101433-4.png]]
146	146
147	147
...	...	@@ -174,8 +174,12 @@
174	174	=== **2.2.1 Select your area frequency** ===
175	175
176	176
	208	+(((
177	177	First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
178	178
	211	+
	212	+)))
	213	+
179	179	[[image:image-20220622103332-9.png]]
180	180
181	181
...	...	@@ -185,6 +185,7 @@
185	185
186	186	Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
187	187
	223	+
188	188	[[image:image-20220622103355-10.png]]
189	189
190	190
...	...	@@ -204,7 +204,7 @@
204	204
205	205
206	206
207		-== 2.2.3 Register the gateway to The Things Network ==
	243	+== **2.2.3 Register the gateway to The Things Network** ==
208	208
209	209
210	210	**Login to The Things Network**
...	...	@@ -230,6 +230,7 @@
230	230	//Shows the system running status~://
231	231
232	232
	269	+
233	233	== **3.2 LoRa Settings** ==
234	234
235	235
...	...	@@ -240,18 +240,19 @@
240	240
241	241	//Different LPS8v2 hardware versions can support different frequency ranges~://
242	242
243		-* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
	280	+* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
244	244	* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
245	245
246	246	(% class="wikigeneratedid" %)
247	247	//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
248	248
	286	+
249	249	(% class="wikigeneratedid" %)
250	250	[[image:image-20220616110739-1.png||height="372" width="682"]]
251	251
252	252
253	253	(((
254		-(% style="color:red" %)//**Note ***: See this instruction for how to customize the frequency band: //(%%)//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
	292	+(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
255	255	)))
256	256
257	257
...	...	@@ -264,20 +264,26 @@
264	264
265	265	//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
266	266
	305	+
267	267	[[image:image-20220616111932-2.png||height="516" width="672"]]
268	268
269	269
	309	+
270	270	=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
271	271
272	272
273	273	//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
274	274
	315	+
275	275	[[image:image-20220616113246-3.png||height="396" width="672"]]
276	276
277	277
	319	+(((
278	278	Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
	321	+)))
279	279
280	280
	324	+
281	281	== **3.4 Network Settings** ==
282	282
283	283
...	...	@@ -287,12 +287,14 @@
287	287	[[image:image-20220616114756-4.png||height="251" width="669"]]
288	288
289	289
	334	+
290	290	=== **3.4.2 Network ~-~-> System Status** ===
291	291
292	292
293		-[[image:image-20220616115229-5.png||height="548" width="665"]]
	338	+[[image:image-20220820134112-2.png||height="539" width="668"]]
294	294
295	295
	341	+
296	296	=== **3.4.3 Network ~-~-> Firewall** ===
297	297
298	298
...	...	@@ -299,6 +299,7 @@
299	299	[[image:image-20220616115351-6.png||height="244" width="661"]]
300	300
301	301
	348	+
302	302	== **3.5 System** ==
303	303
304	304
...	...	@@ -308,6 +308,7 @@
308	308	Shows the system info:
309	309
310	310
	358	+
311	311	=== **3.5.2 System ~-~-> Backup/Restore** ===
312	312
313	313
...	...	@@ -315,67 +315,99 @@
315	315
316	316
317	317
318		-= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
	366	+= **4. Build-in Server** =
319	319
320	320
321		-The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
	369	+The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
322	322
323		-You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
324	324
	372	+[[image:image-20220820115644-1.png]]
325	325
326		-Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
327	327
	375	+(% style="color:red" %)**Note:**
328	328
329		-Login account:
	377	+ **Path**: System ~-~-> Built-in Server
330	330
331		-**User ID: ** (% class="mark" %)admin
332	332
333		-**Password: ** (% class="mark" %)dragino
	380	+**Troubleshooting:**
334	334
335	335
336		-[[image:image-20220725171719-1.png||height="570" width="769"]]
	383	+**~ 1. URL does not jump properly**
337	337
338		-**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
339		- You can complete the installation manually with the following command.(%%)**
	385	+ For the ttn-stack, you can click the update the URL which will update the configuration where change the hotsname to the current local IP address as the URL.
340	340
	387	+ For the Node-Red, you can use the local IP address and the port is 18880 to access it.
341	341
342		-(% class="box infomessage" %)
343		-(((
344		-(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
345	345
346		-(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
347		-)))
348	348
	391	+== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
349	349
350		-= **5. Build-in Application Server ~-~- Node-Red** =
351	351
	394	+You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
352	352
353		-The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
	396	+Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
354	354
355		-You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
356	356
	399	+Login account:
357	357
358		-Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
	401	+**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
359	359
	403	+**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
	404	+
	405	+
	406	+[[image:image-20220725171719-1.png||height="570" width="769"]]
	407	+
	408	+
	409	+
	410	+== **4.2. Application Server ~-~- Node-Red** ==
	411	+
	412	+
	413	+You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
	414	+
	415	+
	416	+Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
	417	+
	418	+
360	360	[[image:image-20220725172124-3.png||height="610" width="843"]]
361	361
362	362
363	363
364		-**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
365		- You can complete the installation manually with the following command.(%%)**
	423	+= **6. How users can access LPS8v2 using serial USB** =
366	366
367	367
	426	+**USB TTL to LPS8v2  Connection:**
	427	+
	428	+Port 1 of the UART on the LPS8v2 is GND
	429	+
368	368	(% class="box infomessage" %)
369	369	(((
370		-(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
371		-chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
	432	+TXD  <~-~--> UART RXD (Gray line)
	433	+
	434	+RXD  <~-~--> UART TXD (White line)
	435	+
	436	+GND <~-~--> GND (Black line)
372	372	)))
373	373
374		-[[image:image-20220728102000-1.png]]
375	375
	440	+**LPS8v2 UART connection photo**
376	376
	442	+[[image:image-20220804163015-1.png||height="621" width="466"]]
	443	+
	444	+
	445	+
	446	+In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
	447	+
	448	+
	449	+[[image:image-20220804164928-3.png||height="320" width="332"]]
	450	+
	451	+
	452	+[[image:image-20220804164747-2.png||height="622" width="594"]]
	453	+
	454	+
	455	+
377	377	(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
378	378
	458	+
379	379	(((
380	380	**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
381	381	)))
...	...	@@ -384,9 +384,12 @@
384	384	**//With your question as detailed as possible. We will reply and help you in the shortest.//**
385	385
386	386
	467	+
387	387	= **11 Reference** =
388	388
	470	+
389	389	* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	472	+* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
390	390
391	391
392	392	)))
...	...	@@ -393,29 +393,32 @@
393	393
394	394	= **12. Order Info** =
395	395
	479	+
396	396	(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
397	397
398	398	(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
399	399
400		-* **AS923**: LoRaWAN AS923 band
401		-* **AU915**: LoRaWAN AU915 band
402		-* **EU868**: LoRaWAN EU868 band
403		-* **KR920**: LoRaWAN KR920 band
404		-* **US915**: LoRaWAN US915 band
405		-* **IN865**: LoRaWAN IN865 band
	484	+* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
	485	+* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
	486	+* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
	487	+* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
	488	+* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
	489	+* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
406	406
407	407	(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
408	408
409		-* ** E**: EMEA, Korea, Thailand, India.
410		-* ** A**: North America/ Rogers/AT&T/T-Mobile.
411		-* ** AU**: Latin America, New Zeland, Taiwan
412		-* ** J**: Japan, DOCOMO/SoftBank/ KDDI
	493	+* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
	494	+* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
	495	+* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
	496	+* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
413	413
414	414	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
415	415
416	416
	501	+
417	417	= **13. Manufacturer Info** =
418	418
	504	+
419	419	**Shenzhen Dragino Technology Development co. LTD**
420	420
421	421	Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
...	...	@@ -423,21 +423,39 @@
423	423	LongCheng Street, LongGang District ; Shenzhen 518116,China
424	424
425	425
	512	+
426	426	= **14. FCC Warning** =
427	427
	515	+
	516	+(((
428	428	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
	518	+)))
429	429
	520	+(((
430	430	~-~- Reorient or relocate the receiving antenna.
	522	+)))
431	431
	524	+(((
432	432	~-~- Increase the separation between the equipment and receiver.
	526	+)))
433	433
	528	+(((
434	434	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
	530	+)))
435	435
	532	+(((
436	436	~-~- Consult the dealer or an experienced radio/TV technician for help.
	534	+)))
437	437
438	438
	537	+(((
439	439	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
	539	+)))
440	440
441	441
	542	+(((
442	442	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
	544	+
	545	+
443	443	)))
	547	+)))

image-20220804163015-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.3 MB

Content

image-20220804164747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+75.6 KB

Content

image-20220804164928-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.2 KB

Content

image-20220820115644-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.8 KB

Content

image-20220820134112-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+67.4 KB

Content