Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.15 >
edited by Xiaoling
on 2022/07/28 18:02
To version < 236.1 >
edited by Xiaoye
on 2023/07/21 14:48
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -13,22 +13,25 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
24 24  )))
25 25  
26 26  (((
27 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
28 28  )))
29 29  
30 30  (((
31 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
32 32  )))
33 33  
34 34  (((
... ... @@ -36,14 +36,13 @@
36 36  )))
37 37  
38 38  (((
39 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,26 +50,23 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 54  (% style="color:#037691" %)**Interface:**
55 55  
56 56  * 10M/100M RJ45 Ports x 1
57 57  * Multi-Channel LoRaWAN Wireless
58 58  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
59 59  
60 -
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
69 +== 1.3 Features ==
67 67  
68 68  
69 -
70 -== **1.3 Features** ==
71 -
72 -
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -82,59 +82,79 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
86 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
87 87  
87 +== 1.4 LED Indicators ==
88 88  
89 89  
90 +LPS8-V2 has totally four LEDs, They are:
90 90  
91 -== **1.4 Block Diagram** ==
92 92  
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
93 93  
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
94 94  
95 -== **1.5 LED Indicators** ==
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
96 96  
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
97 97  
98 -LPS8-V2 has totally four LEDs, They are:
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
99 99  
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
100 100  
101 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
102 102  
103 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
108 +== 1.5 Button Intruction ==
106 106  
107 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
108 108  
109 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
111 +LPS8-V2 has a black toggle button, which is:
110 110  
111 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
114 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
114 114  
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
115 115  
116 116  
117 -= **2. Quick Start** =
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
118 118  
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
119 119  
123 +
124 += 2. Quick Start =
125 +
126 +
120 120  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
121 121  
122 122  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
123 123  
124 124  
132 +== 2.1 Access and Configure LPS8-V2 ==
125 125  
126 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
127 127  
128 128  
129 -== **2.1.1 connect the network.** ==
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
130 130  
131 -=== ===
132 132  
133 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
134 134  
142 +(% style="background-color:yellow" %)**dragino+dragino**
135 135  
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 +
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
136 136  (((
137 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
156 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
138 138  )))
139 139  
140 140  (((
... ... @@ -145,33 +145,43 @@
145 145  
146 146  
147 147  
148 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
149 149  
150 150  
151 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
152 152  
153 153  
154 -(((
155 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
156 -)))
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
157 157  
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
158 158  
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
159 159  
160 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
161 161  
162 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
163 163  
164 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
165 165  
166 -[[image:image-20220622101433-4.png]]
183 +As in the below photo:
167 167  
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
168 168  
169 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
170 170  
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
171 171  
172 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
173 173  
174 174  
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
201 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
202 +
203 +
175 175  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
176 176  
177 177  
... ... @@ -185,32 +185,125 @@
185 185  [[image:image-20220622102847-7.png]]
186 186  
187 187  
188 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
217 +[[image:image-20220622102901-8.png||height="476" width="938"]]
189 189  
190 190  
220 +=== 2.1.2 Access Configure Web UI ===
191 191  
192 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
193 193  
223 +**Web Interface**
194 194  
195 -=== **2.2.1 Select your area frequency** ===
225 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
196 196  
197 197  
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 +
230 +You will see the login interface of LPS8-V2 as shown below.
231 +
232 +The account details for Web Login are:
233 +
234 +(% style="color:blue" %)**User Name: root**
235 +
236 +(% style="color:blue" %)**Password:   dragino**
237 +
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
239 +
240 +
241 +== 2.2  Typical Network Setup ==
242 +
243 +=== 2.2.1  Overview ===
244 +
245 +
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
198 198  (((
199 199  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
320 +
321 +
200 200  )))
201 201  
202 -[[image:image-20220622103332-9.png]]
324 +[[image:image-20220622103332-9.png||height="485" width="938"]]
203 203  
204 204  
327 +=== 2.3.2 Get the only gateway EUI ===
205 205  
206 -=== **2.2.2 Get the only gateway EUI** ===
207 207  
208 -
209 209  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
210 210  
211 -[[image:image-20220622103355-10.png]]
212 212  
333 +[[image:image-20220622103355-10.png||height="698" width="949"]]
213 213  
335 +
214 214  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
215 215  
216 216  
... ... @@ -226,10 +226,9 @@
226 226  [[image:image-20220622103956-12.png]]
227 227  
228 228  
351 +=== 2.3.3 Register the gateway to The Things Network ===
229 229  
230 -== 2.2.3 Register the gateway to The Things Network ==
231 231  
232 -
233 233  **Login to The Things Network**
234 234  
235 235  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -243,200 +243,543 @@
243 243  **Get it online**
244 244  
245 245  
367 += 3. Web Configure Pages =
246 246  
247 -= **3. Web Configure Pages** =
369 +== 3.1 Home ==
248 248  
249 249  
250 -== **3.1 Home** ==
372 +Shows the system running status:
251 251  
374 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
252 252  
253 -//Shows the system running status~://
254 254  
377 +== 3.2 LoRa Settings ==
255 255  
256 -== **3.2 LoRa Settings** ==
379 +=== 3.2.1 LoRa ~-~-> LoRa ===
257 257  
258 258  
259 -=== **3.2.1 LoRa ~-~-> LoRa** ===
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
260 260  
384 +Different LPS8v2 hardware versions can support different frequency ranges:
261 261  
262 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
263 263  
264 -//Different LPS8v2 hardware versions can support different frequency ranges~://
389 +(% class="wikigeneratedid" %)
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
265 265  
266 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
267 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
268 268  
269 269  (% class="wikigeneratedid" %)
270 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
271 -
272 -(% class="wikigeneratedid" %)
273 273  [[image:image-20220616110739-1.png||height="372" width="682"]]
274 274  
275 275  
276 276  (((
277 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
398 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
278 278  )))
279 279  
280 280  
402 +== 3.3 LoRaWAN Settings ==
281 281  
282 -== **3.3 LoRaWAN Settings** ==
404 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
283 283  
284 284  
285 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
286 286  
287 287  
288 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
289 -
290 290  [[image:image-20220616111932-2.png||height="516" width="672"]]
291 291  
292 292  
413 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
293 293  
294 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
295 295  
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
296 296  
297 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
298 298  
299 299  [[image:image-20220616113246-3.png||height="396" width="672"]]
300 300  
301 301  
302 302  (((
303 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
423 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
304 304  )))
305 305  
306 306  
427 +== 3.4 Network Settings ==
307 307  
308 -== **3.4 Network Settings** ==
429 +=== 3.4.1 Network ~-~-> WiFi ===
309 309  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
310 310  
311 -=== **3.4.1 Network ~-~-> WiFi** ===
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
312 312  
313 313  
314 -[[image:image-20220616114756-4.png||height="251" width="669"]]
436 +=== 3.4.2 Network ~-~-> System Status ===
315 315  
316 316  
439 +[[image:image-20220820134112-2.png||height="539" width="668"]]
317 317  
318 -=== **3.4.2 Network ~-~-> System Status** ===
319 319  
442 +=== 3.4.3 Network ~-~-> Network ===
320 320  
321 -[[image:image-20220616115229-5.png||height="548" width="665"]]
322 322  
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
323 323  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
324 324  
325 -=== **3.4.3 Network ~-~-> Firewall** ===
326 326  
450 +=== 3.4.4 Network ~-~-> Cellular ===
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
329 329  
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
330 330  
455 +(% style="color:red" %)**Note: APN cannot be empty.**
331 331  
332 -== **3.5 System** ==
457 +[[image:image-20230228115126-1.png]]
333 333  
334 334  
335 -=== **3.5.1  System ~-~-> System Overview** ===
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
336 336  
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
337 337  
464 +
465 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
466 +
467 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
468 +
469 +
470 +== 3.5 System ==
471 +
472 +=== 3.5.1 System ~-~-> System Overview ===
473 +
474 +
338 338  Shows the system info:
339 339  
477 +[[image:image-20220917144512-5.png||height="618" width="853"]]
340 340  
341 341  
342 -=== **3.5.2 System ~-~-> Backup/Restore** ===
480 +=== 3.5.2 System ~-~-> System General ===
343 343  
344 344  
345 -[[image:image-20220616115808-7.png||height="194" width="649"]]
483 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
346 346  
485 +In addition, Users can customize the FallBack IP address.
347 347  
487 +[[image:image-20230214094058-3.png]]
348 348  
349 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
350 350  
490 +=== 3.5.3 System ~-~-> Backup/Restore ===
351 351  
352 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
353 353  
354 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
493 +[[image:image-20220917144725-6.png||height="208" width="869"]]
355 355  
356 356  
496 +=== 3.5.4 System ~-~-> Remoteit ===
497 +
498 +
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
500 +
501 +
502 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
503 +
504 +[[image:image-20221230092303-2.png]]
505 +
506 +
507 +=== 3.5.5 System ~-~-> Package Management ===
508 +
509 +
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
511 +
512 +[[image:image-20230214094316-4.png]]
513 +
514 +
515 += 4. Build-in Server =
516 +
517 +
518 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
519 +
520 +[[image:image-20230616175617-8.png||height="390" width="894"]]
521 +
522 +[[image:image-20230616175558-7.png||height="362" width="894"]]
523 +
524 +
525 +
526 +(% style="color:red" %)**Note:**
527 +
528 + **Path**: Server ~-~-> Network Server
529 +
530 + Server ~-~-> Application Server
531 +
532 +
533 +**Troubleshooting:**
534 +
535 +
536 +**~ 1. URL does not jump properly**
537 +
538 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
539 +
540 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
541 +
542 +
543 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
544 +
545 +
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
547 +
357 357  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
358 358  
359 359  
360 360  Login account:
361 361  
362 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
553 +**Username : ** (% style="background-color:yellow" %)**admin**
363 363  
364 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
555 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
365 365  
557 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
366 366  
367 -[[image:image-20220725171719-1.png||height="570" width="769"]]
368 368  
369 369  
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
562 +
563 +
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
565 +
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
567 +
568 +[[image:image-20230321092456-1.png]]
569 +
570 +
571 +
572 +== 4.2 Application Server ~-~- Node-Red ==
573 +
574 +
575 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
576 +
577 +
578 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
579 +
580 +
581 +[[image:image-20220725172124-3.png||height="610" width="843"]]
582 +
583 +
584 +
585 +=== **Using Node-Red, InfluxDB and Grafana** ===
586 +
587 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
588 +
589 +
590 +the users can refer to this link to install them.
591 +
592 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
593 +
594 +
595 +=== **Upgrade the node.js** ===
596 +
597 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
598 +
599 +
600 +the users can refer to this link to upgrade them.
601 +
602 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
603 +
604 +
605 +== 4.3 How to disable the built-in server ==
606 +
607 +
608 +Use the following commands to start and stop the TTNv3 service:
609 +
610 +(% class="box infomessage" %)
370 370  (((
371 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
372 - You can complete the installation manually with the following command.**
612 +**# start**
613 +systemctl start ttnstack
614 +
615 +**# stop**
616 +systemctl stop ttnstack
617 +
618 +**# enable**
619 +systemctl enable ttnstack
620 +
621 +**#disable**
622 +systemctl disable ttnstack
373 373  )))
374 374  
625 +Use the following commands to start and stop the Node-Red service:
375 375  
376 376  (% class="box infomessage" %)
377 377  (((
629 +**# start**
630 +systemctl start nodered
631 +
632 +**# stop**
633 +systemctl stop nodered
634 +
635 +**# enable**
636 +systemctl enable nodered
637 +
638 +**#disable**
639 +systemctl disable nodered
640 +)))
641 +
642 +
643 +== 4.4 How to use ChirpStack on LPS8-V2 ==
644 +
645 +
646 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
647 +
648 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
649 +
650 +
651 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
652 +
653 +
654 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
655 +
656 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
657 +
658 +[[image:image-20230602140406-3.png||height="480" width="918"]]
659 +
660 +
661 +When the configuration is complete, click** "Save&Apply"**.
662 +
663 +
664 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
665 +
666 +[[image:image-20230602143122-4.png||height="511" width="983"]]
667 +
668 +
669 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
670 +
671 +
672 +
673 += 6. How users can access LPS8-V2 using serial USB =
674 +
675 +
676 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
677 +
678 +Port 1 of the UART on the LPS8-V2 is GND
679 +
680 +(% class="box infomessage" %)
378 378  (((
379 -(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
380 -chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
682 +**TXD  <~-~--> UART RXD (Gray line)**
683 +
684 +**RXD  <~-~--> UART TXD (White line)**
685 +
686 +**GND <~-~--> GND (Black line)**
381 381  )))
382 -)))
383 383  
689 +**LPS8v2 UART connection photo**
384 384  
691 +[[image:image-20230421094319-2.png||height="351" width="392"]]
385 385  
386 -= **5. Build-in Application Server ~-~- Node-Red** =
693 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
387 387  
388 388  
389 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
696 +[[image:image-20220804164928-3.png||height="320" width="332"]]
390 390  
391 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
392 392  
699 +[[image:image-20220804164747-2.png||height="622" width="594"]]
393 393  
394 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
395 395  
702 += 7. OTA System Update =
396 396  
397 -[[image:image-20220725172124-3.png||height="610" width="843"]]
398 398  
705 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
399 399  
707 +
708 +== 7.1 Auto-update method ==
709 +
710 +
711 +The default, each gateway will enable the auto-update function.
712 +
713 +this function will be triggered every boot and every midnight.
714 +
715 +
716 +Users can enable/disable it via Web Page
717 +
718 +[[image:image-20230607094447-2.png]]
719 +
720 +
721 +== 7.2 Manual upgrade method ==
722 +
723 +
724 +1). Using the Linux command to upgrade the system
725 +
726 +
727 +(% class="box infomessage" %)
400 400  (((
401 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
402 - You can complete the installation manually with the following command.**
729 +**apt update && apt install *dragino***
403 403  )))
404 404  
405 405  
733 +2). Upgrade the system via the Web page button of "Manual Update"
406 406  
735 +
736 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
737 +
738 +[[image:image-20230607093849-1.png]]
739 +
740 +
741 +
742 += 8. FAQ =
743 +
744 +== 8.1 How to change Hostname ==
745 +
746 +
747 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
748 +
407 407  (% class="box infomessage" %)
408 408  (((
409 -(((
410 -(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
411 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
751 +hostnamectl set-hostname dragino-123456
412 412  )))
413 -)))
414 414  
415 -[[image:image-20220728102000-1.png]]
754 +[[image:image-20230517102429-1.png]]
416 416  
756 +After the configuration is complete, run "reboot" to restart the gateway.
417 417  
418 418  
419 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
759 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
420 420  
421 421  
762 +Migrate guide:
763 +
764 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
765 +
766 +**2. On the Server ~-~-> Network Server interface, click "Management"**
767 +
768 +[[image:image-20230616162454-1.png]]
769 +
770 +
771 +**3. Click "Migrate-Chirpstack"**
772 +
773 +[[image:image-20230616162742-2.png]]
774 +
775 +
776 +**4. Strat Install **
777 +
778 +
779 +Click start Install and wait until the migration succeeds
780 +
781 +[[image:image-20230616162934-3.png]]
782 +
783 +
784 +**5.Migration complete check result**
785 +
786 +[[image:image-20230616174526-4.png||height="706" width="983"]]
787 +
788 +
789 +[[image:image-20230616180004-9.png]]
790 +
791 +
792 +== 8.3 How to reduce the 4g data consumed ==
793 +
794 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
795 +
796 +
797 +[[image:image-20230719100239-1.png||height="724" width="994"]]
798 +
799 +
800 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
801 +
802 +[[image:image-20230719100332-2.png]]
803 +
804 +3. Disable the auto-update:
805 +
806 +[[image:image-20230719100419-3.png||height="458" width="995"]]
807 +
808 +
809 +
810 +
811 += 9. Trouble Shooting =
812 +
813 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
814 +
815 +
816 +[[image:image-20220920135918-1.png]]
817 +
818 +
819 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
820 +
821 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
822 +
823 +
824 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
825 +
826 +**Click the update URL button to configure the URL with the current eth port address.**
827 +
828 +[[image:image-20220920141936-2.png]]
829 +
830 +
831 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
832 +
833 +
834 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
835 +
836 +[[image:image-20230508171607-1.png]]
837 +
838 +
839 +== 9.3  Fallback IP does not work, how can users check ==
840 +
841 +
842 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
843 +
844 +
845 +**1.Check whether the configuration is correct**
846 +
847 +Run the CMD command to ipconfig and ping 172.31.255.254.
848 +
849 +If this fails, the user needs to reconfigure.
850 +
851 +[[image:image-20230413170224-3.png||height="433" width="707"]]
852 +
853 +[[image:image-20230413170246-4.png]]
854 +
855 +
856 +**2. Check whether the firewall is disabled**
857 +
858 +If the firewall is not down, this will affect access to the gateway.
859 +
860 +
861 +== 9.4  Click "Manual_Update", why there is no response? ==
862 +
863 +
864 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
865 +
866 +
867 +[[image:image-20230527090555-3.png||height="660" width="832"]]
868 +
869 +
870 +== 9.4 Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
871 +
872 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
873 +
874 +
875 +(% class="box infomessage" %)
422 422  (((
423 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
877 +apt update && apt install dragino-fallback
878 +
879 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
424 424  )))
425 425  
882 +
883 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
884 +
885 +
426 426  (((
427 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
887 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
888 +)))
428 428  
890 +(((
891 +With your question as detailed as possible. We will reply and help you in the shortest.
429 429  
430 430  
431 -= **11 Reference** =
894 += 11. Reference =
432 432  
433 433  
434 434  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
898 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
435 435  
436 436  
437 437  )))
438 438  
439 -= **12. Order Info** =
903 += 12. Order Info =
440 440  
441 441  
442 442  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -444,26 +444,33 @@
444 444  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
445 445  
446 446  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
911 +
447 447  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
913 +
448 448  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
915 +
449 449  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
917 +
450 450  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
919 +
451 451  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
452 452  
453 453  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
454 454  
455 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
456 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
457 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
458 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
924 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
459 459  
460 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
926 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
461 461  
928 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
462 462  
930 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
463 463  
464 -= **13. Manufacturer Info** =
932 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
465 465  
466 466  
935 += 13. Manufacturer Info =
936 +
937 +
467 467  **Shenzhen Dragino Technology Development co. LTD**
468 468  
469 469  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -471,10 +471,9 @@
471 471  LongCheng Street, LongGang District ; Shenzhen 518116,China
472 472  
473 473  
945 += 14. FCC Warning =
474 474  
475 -= **14. FCC Warning** =
476 476  
477 -
478 478  (((
479 479  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
480 480  )))
... ... @@ -503,5 +503,7 @@
503 503  
504 504  (((
505 505  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
976 +
977 +
506 506  )))
507 507  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0