Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.15 >
edited by Xiaoling
on 2022/07/28 18:02
To version < 188.1 >
edited by Xiaoye
on 2023/04/25 15:57
>
Change comment: Uploaded new attachment "image-20230425155659-8.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,26 +50,25 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 54  (% style="color:#037691" %)**Interface:**
55 55  
56 56  * 10M/100M RJ45 Ports x 1
57 57  * Multi-Channel LoRaWAN Wireless
58 58  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
59 59  
60 -
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  
68 68  
71 +== 1.3 Features ==
69 69  
70 -== **1.3 Features** ==
71 71  
72 -
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -87,54 +87,65 @@
87 87  
88 88  
89 89  
91 +== 1.4 Block Diagram ==
90 90  
91 -== **1.4 Block Diagram** ==
92 92  
93 93  
95 +== 1.5 LED Indicators ==
94 94  
95 -== **1.5 LED Indicators** ==
96 96  
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 101  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
107 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 108  
109 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 111  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
114 114  
115 115  
116 +== 1.6 Button Intruction ==
116 116  
117 -= **2. Quick Start** =
118 118  
119 +LPS8-V2 has a black toggle button, which is:
119 119  
120 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
121 121  
122 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
122 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
124 124  
125 125  
126 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
127 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
127 127  
129 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 128  
129 -== **2.1.1 connect the network.** ==
130 130  
131 -=== ===
132 += 2. Quick Start =
132 132  
133 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
134 134  
135 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
135 135  
137 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 +
139 +
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
141 +
142 +=== 2.1.1 connect the network ===
143 +
144 +
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
146 +
147 +
136 136  (((
137 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
138 138  )))
139 139  
140 140  (((
... ... @@ -145,33 +145,43 @@
145 145  
146 146  
147 147  
148 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
149 149  
150 150  
151 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
163 +[[image:image-20230107084650-2.png||height="310" width="839"]]
152 152  
153 153  
154 -(((
155 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
156 -)))
166 +(% style="color:blue" %)**Steps to connect via fallback IP:**
157 157  
168 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
158 158  
170 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
159 159  
160 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
161 161  
162 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
173 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
163 163  
164 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
165 165  
166 -[[image:image-20220622101433-4.png]]
176 +As in the below photo:
167 167  
178 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
168 168  
169 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
170 170  
181 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
171 171  
172 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
183 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
173 173  
174 174  
186 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
187 +
188 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
189 +
190 +
191 +
192 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
193 +
194 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
195 +
196 +
175 175  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
176 176  
177 177  
... ... @@ -185,32 +185,122 @@
185 185  [[image:image-20220622102847-7.png]]
186 186  
187 187  
188 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
210 +[[image:image-20220622102901-8.png||height="476" width="938"]]
189 189  
190 190  
213 +=== 2.1.2 Access Configure Web UI ===
191 191  
192 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
193 193  
216 +**Web Interface**
194 194  
195 -=== **2.2.1 Select your area frequency** ===
218 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
196 196  
197 197  
221 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
222 +
223 +You will see the login interface of LPS8-V2 as shown below.
224 +
225 +The account details for Web Login are:
226 +
227 +(% style="color:#4f81bd" %)**User Name: root**
228 +
229 +(% style="color:#4f81bd" %)**Password:   dragino**
230 +
231 +[[image:image-20230106153501-1.png||height="367" width="894"]]
232 +
233 +
234 +== 2.2  Typical Network Setup ==
235 +
236 +=== 2.2.1  Overview ===
237 +
238 +
239 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
240 +
241 +* **WAN Port Internet Mode**
242 +* **WiFi Client Mode**
243 +* **Cellular Mode**
244 +
245 +=== 2.2.2  Use WAN port to access Internet ===
246 +
247 +
248 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
249 +
250 +
251 +[[image:image-20230411100633-2.png||height="501" width="935"]]
252 +
253 +
254 +=== 2.2.3  Access the Internet as a WiFi Client ===
255 +
256 +
257 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
258 +
259 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
260 +
261 +[[image:image-20230411095739-1.png||height="264" width="691"]]
262 +
263 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
264 +
265 +
266 +=== 2.2.4  Use built-in 4G modem for internet access ===
267 +
268 +
269 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
270 +
271 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
272 +
273 +
274 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
275 +
276 +First, install the Micro SIM card as below direction
277 +
278 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
279 +
280 +
281 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
282 +
283 +
284 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
285 +
286 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
287 +
288 +
289 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
290 +
291 +
292 +=== 2.2.5  Check Internet connection ===
293 +
294 +In the **home** page, we can check the Internet connection.
295 +
296 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
297 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
298 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
299 +
300 +[[image:image-20230411101534-3.png||height="544" width="942"]]
301 +
302 +
303 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
304 +
305 +=== 2.3.1 Select your area frequency ===
306 +
307 +
198 198  (((
199 199  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
310 +
311 +
200 200  )))
201 201  
202 -[[image:image-20220622103332-9.png]]
314 +[[image:image-20220622103332-9.png||height="485" width="938"]]
203 203  
204 204  
317 +=== 2.3.2 Get the only gateway EUI ===
205 205  
206 -=== **2.2.2 Get the only gateway EUI** ===
207 207  
208 -
209 209  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
210 210  
211 -[[image:image-20220622103355-10.png]]
212 212  
323 +[[image:image-20220622103355-10.png||height="698" width="949"]]
213 213  
325 +
214 214  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
215 215  
216 216  
... ... @@ -226,10 +226,9 @@
226 226  [[image:image-20220622103956-12.png]]
227 227  
228 228  
341 +=== 2.3.3 Register the gateway to The Things Network ===
229 229  
230 -== 2.2.3 Register the gateway to The Things Network ==
231 231  
232 -
233 233  **Login to The Things Network**
234 234  
235 235  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -243,20 +243,19 @@
243 243  **Get it online**
244 244  
245 245  
357 += 3. Web Configure Pages =
246 246  
247 -= **3. Web Configure Pages** =
359 +== 3.1 Home ==
248 248  
249 249  
250 -== **3.1 Home** ==
251 -
252 -
253 253  //Shows the system running status~://
254 254  
364 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
255 255  
256 -== **3.2 LoRa Settings** ==
257 257  
367 +== 3.2 LoRa Settings ==
258 258  
259 -=== **3.2.1 LoRa ~-~-> LoRa** ===
369 +=== 3.2.1 LoRa ~-~-> LoRa ===
260 260  
261 261  
262 262  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -263,97 +263,158 @@
263 263  
264 264  //Different LPS8v2 hardware versions can support different frequency ranges~://
265 265  
266 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
376 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
267 267  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
268 268  
269 269  (% class="wikigeneratedid" %)
270 270  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
271 271  
382 +
272 272  (% class="wikigeneratedid" %)
273 273  [[image:image-20220616110739-1.png||height="372" width="682"]]
274 274  
275 275  
276 276  (((
277 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
388 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
278 278  )))
279 279  
280 280  
392 +== 3.3 LoRaWAN Settings ==
281 281  
282 -== **3.3 LoRaWAN Settings** ==
394 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
283 283  
284 284  
285 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
286 -
287 -
288 288  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
289 289  
399 +
290 290  [[image:image-20220616111932-2.png||height="516" width="672"]]
291 291  
292 292  
403 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
293 293  
294 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
295 295  
296 -
297 297  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
298 298  
408 +
299 299  [[image:image-20220616113246-3.png||height="396" width="672"]]
300 300  
301 301  
302 302  (((
303 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
413 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
304 304  )))
305 305  
306 306  
417 +== 3.4 Network Settings ==
307 307  
308 -== **3.4 Network Settings** ==
419 +=== 3.4.1 Network ~-~-> WiFi ===
309 309  
310 310  
311 -=== **3.4.1 Network ~-~-> WiFi** ===
422 +[[image:image-20220616114756-4.png||height="251" width="669"]]
312 312  
313 313  
314 -[[image:image-20220616114756-4.png||height="251" width="669"]]
425 +=== 3.4.2 Network ~-~-> System Status ===
315 315  
316 316  
428 +[[image:image-20220820134112-2.png||height="539" width="668"]]
317 317  
318 -=== **3.4.2 Network ~-~-> System Status** ===
319 319  
431 +=== 3.4.3 Network ~-~-> Network ===
320 320  
321 -[[image:image-20220616115229-5.png||height="548" width="665"]]
322 322  
434 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
323 323  
436 +[[image:image-20230214093657-2.png||height="333" width="858"]]
324 324  
325 -=== **3.4.3 Network ~-~-> Firewall** ===
326 326  
439 +=== 3.4.4 Network ~-~-> Cellular ===
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
329 329  
442 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
330 330  
444 +(% style="color:red" %)**Note: APN cannot be empty.**
331 331  
332 -== **3.5 System** ==
446 +[[image:image-20230228115126-1.png]]
333 333  
334 334  
335 -=== **3.5.1  System ~-~-> System Overview** ===
449 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
336 336  
451 +[[image:image-20230228115535-2.png||height="478" width="888"]]
337 337  
453 +
454 +== 3.5 System ==
455 +
456 +=== 3.5.1 System ~-~-> System Overview ===
457 +
458 +
338 338  Shows the system info:
339 339  
461 +[[image:image-20220917144512-5.png||height="618" width="853"]]
340 340  
341 341  
342 -=== **3.5.2 System ~-~-> Backup/Restore** ===
464 +=== 3.5.2 System ~-~-> System General ===
343 343  
344 344  
345 -[[image:image-20220616115808-7.png||height="194" width="649"]]
467 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
346 346  
469 +In addition, Users can customize the FallBack IP address.
347 347  
471 +[[image:image-20230214094058-3.png]]
348 348  
349 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
350 350  
474 +=== 3.5.3 System ~-~-> Backup/Restore ===
351 351  
352 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
353 353  
354 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
477 +[[image:image-20220917144725-6.png||height="208" width="869"]]
355 355  
356 356  
480 +=== 3.5.4 System ~-~-> Remoteit ===
481 +
482 +
483 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
484 +
485 +
486 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
487 +
488 +[[image:image-20221230092303-2.png]]
489 +
490 +
491 +=== 3.5.5 System ~-~-> Package Management ===
492 +
493 +
494 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
495 +
496 +[[image:image-20230214094316-4.png]]
497 +
498 +
499 += 4. Build-in Server =
500 +
501 +
502 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
503 +
504 +
505 +[[image:image-20230214095318-5.png||height="347" width="980"]]
506 +
507 +
508 +(% style="color:red" %)**Note:**
509 +
510 + **Path**: System ~-~-> Built-in Server
511 +
512 +
513 +**Troubleshooting:**
514 +
515 +
516 +**~ 1. URL does not jump properly**
517 +
518 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
519 +
520 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
521 +
522 +
523 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
524 +
525 +
526 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
527 +
357 357  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
358 358  
359 359  
... ... @@ -367,58 +367,281 @@
367 367  [[image:image-20220725171719-1.png||height="570" width="769"]]
368 368  
369 369  
541 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
542 +
543 +
544 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
545 +
546 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
547 +
548 +[[image:image-20230321092456-1.png]]
549 +
550 +
551 +== 4.2 Application Server ~-~- Node-Red ==
552 +
553 +
554 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
555 +
556 +
557 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
558 +
559 +
560 +[[image:image-20220725172124-3.png||height="610" width="843"]]
561 +
562 +
563 +
564 +=== **Using Node-Red, InfluxDB and Grafana** ===
565 +
566 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
567 +
568 +
569 +the users can refer to this link to install them.
570 +
571 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
572 +
573 +
574 +=== **Upgrade the node.js** ===
575 +
576 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
577 +
578 +
579 +the users can refer to this link to upgrade them.
580 +
581 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
582 +
583 +
584 +== 4.3 How to disable the built-in server ==
585 +
586 +
587 +Use the following commands to start and stop the TTNv3 service:
588 +
589 +(% class="box infomessage" %)
370 370  (((
371 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
372 - You can complete the installation manually with the following command.**
591 +**# start**
592 +systemctl start ttnstack
593 +
594 +**# stop**
595 +systemctl stop ttnstack
596 +
597 +**# enable**
598 +systemctl enable ttnstack
599 +
600 +**#disable**
601 +systemctl disable ttnstack
373 373  )))
374 374  
604 +Use the following commands to start and stop the Node-Red service:
375 375  
376 376  (% class="box infomessage" %)
377 377  (((
608 +**# start**
609 +systemctl start nodered
610 +
611 +**# stop**
612 +systemctl stop nodered
613 +
614 +**# enable**
615 +systemctl enable nodered
616 +
617 +**#disable**
618 +systemctl disable nodered
619 +)))
620 +
621 +
622 +== 4.4 How to use ChirpStack on LPS8-V2 ==
623 +
624 +
625 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
626 +
627 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
628 +
629 +[[image:image-20230222094908-1.png||height="133" width="798"]]
630 +
631 +
632 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
633 +
634 +
635 +
636 += 6. How users can access LPS8-V2 using serial USB =
637 +
638 +
639 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
640 +
641 +
642 +Port 1 of the UART on the LPS8-V2 is GND
643 +
644 +(% class="box infomessage" %)
378 378  (((
379 -(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
380 -chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
646 +**TXD  <~-~--> UART RXD (Gray line)**
647 +
648 +**RXD  <~-~--> UART TXD (White line)**
649 +
650 +**GND <~-~--> GND (Black line)**
381 381  )))
382 -)))
383 383  
384 384  
654 +**LPS8v2 UART connection photo**
385 385  
386 -= **5. Build-in Application Server ~-~- Node-Red** =
387 387  
657 +[[image:image-20230421094319-2.png||height="351" width="392"]]
388 388  
389 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
659 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
390 390  
391 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
392 392  
662 +[[image:image-20220804164928-3.png||height="320" width="332"]]
393 393  
394 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
395 395  
665 +[[image:image-20220804164747-2.png||height="622" width="594"]]
396 396  
397 -[[image:image-20220725172124-3.png||height="610" width="843"]]
398 398  
668 += 7. Use the helium gateway-rs as the Data-only Hotspot =
399 399  
670 +
671 +== **Step 1: Configure Frequency Band** ==
672 +
673 +
674 +//Each country has a requirement for frequency region. Choose the right one for your area.//
675 +
676 +[[image:image-20220905164308-1.png]]
677 +
678 +
679 +
680 +== **Step 2: Configure the forward address** ==
681 +
682 +
683 +**Select one of the servers to configure.**
684 +
685 +**For example:**
686 +
687 +[[image:image-20220905164847-2.png]]
688 +
689 +
690 +
691 +== **Step 3: Download and Install the Helium-gateway-rs** ==
692 +
693 +
694 +**Access the gateway CLI via SSH.**
695 +
696 +[[image:image-20220905165222-3.png]]
697 +
698 +
699 +**Download gateway-rs.**
700 +
701 +[[image:image-20220905165715-5.png]]
702 +
703 +(% class="box infomessage" %)
400 400  (((
401 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
402 - You can complete the installation manually with the following command.**
705 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
403 403  )))
404 404  
405 405  
709 +**Install gateway-rs.**
406 406  
711 +[[image:image-20220905165917-7.png]]
712 +
407 407  (% class="box infomessage" %)
408 408  (((
715 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
716 +)))
717 +
718 +
719 +**Modify configuration.**
720 +
721 +
722 +[[image:image-20220905173847-12.png]]
723 +
724 +
725 +(% class="box infomessage" %)
409 409  (((
410 -(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
411 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
727 +**region=<Enter regional parameters> \
728 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
729 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
412 412  )))
731 +
732 +
733 +**Restart the helium_gateway**
734 +
735 +[[image:image-20220905170920-9.png]]
736 +
737 +
738 +(% class="box infomessage" %)
739 +(((
740 +**systemctl restart helium_gateway**
413 413  )))
414 414  
415 -[[image:image-20220728102000-1.png]]
416 416  
744 +**Check the helium_gateway Log：**
417 417  
746 +[[image:image-20220905173952-13.png]]
418 418  
419 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
420 420  
749 +(% class="box infomessage" %)
750 +(((
751 +**journalctl -u helium_gateway -f**
752 +)))
421 421  
754 +
755 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
756 +
757 +where the helium gateway log is shown:
758 +
759 +[[image:image-20220905174534-14.png]]
760 +
761 +
762 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
763 +
764 +
765 += 8. OTA System Update =
766 +
767 +
768 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
769 +
770 +
771 += 9. Trouble Shooting =
772 +
773 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
774 +
775 +
776 +[[image:image-20220920135918-1.png]]
777 +
778 +
779 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
780 +
781 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
782 +
783 +
784 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
785 +
786 +**Click the update URL button to configure the URL with the current eth port address.**
787 +
788 +[[image:image-20220920141936-2.png]]
789 +
790 +
791 +== 9.2  Fallback IP does not work, how can users check ==
792 +
793 +
794 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
795 +
796 +
797 +**1.Check whether the configuration is correct**
798 +
799 +Run the CMD command to ipconfig and ping 172.31.255.254.
800 +
801 +If this fails, the user needs to reconfigure.
802 +
803 +[[image:image-20230413170224-3.png||height="433" width="707"]]
804 +
805 +[[image:image-20230413170246-4.png]]
806 +
807 +
808 +**2. Check whether the firewall is disabled**
809 +
810 +If the firewall is not down, this will affect access to the gateway.
811 +
812 +
813 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
814 +
815 +
422 422  (((
423 423  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
424 424  )))
... ... @@ -427,16 +427,16 @@
427 427  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
428 428  
429 429  
824 += 11. Reference =
430 430  
431 -= **11 Reference** =
432 432  
433 -
434 434  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
828 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
435 435  
436 436  
437 437  )))
438 438  
439 -= **12. Order Info** =
833 += 12. Order Info =
440 440  
441 441  
442 442  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -460,10 +460,9 @@
460 460  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
461 461  
462 462  
857 += 13. Manufacturer Info =
463 463  
464 -= **13. Manufacturer Info** =
465 465  
466 -
467 467  **Shenzhen Dragino Technology Development co. LTD**
468 468  
469 469  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -471,10 +471,9 @@
471 471  LongCheng Street, LongGang District ; Shenzhen 518116,China
472 472  
473 473  
867 += 14. FCC Warning =
474 474  
475 -= **14. FCC Warning** =
476 476  
477 -
478 478  (((
479 479  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
480 480  )))
... ... @@ -503,5 +503,7 @@
503 503  
504 504  (((
505 505  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
898 +
899 +
506 506  )))
507 507  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0