Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.12 >
edited by Xiaoling
on 2022/07/28 17:54
To version < 236.3 >
edited by Xiaoling
on 2023/07/21 16:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,22 +13,25 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
24 24  )))
25 25  
26 26  (((
27 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
28 28  )))
29 29  
30 30  (((
31 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
32 32  )))
33 33  
34 34  (((
... ... @@ -36,14 +36,13 @@
36 36  )))
37 37  
38 38  (((
39 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,29 +50,25 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 70  
71 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -85,60 +85,81 @@
85 85  ** Semtech UDP Packet Forwarder
86 86  ** LoRaWAN Basic Station
87 87  ** ChirpStack-Gateway-Bridge (MQTT)
88 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
89 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
90 90  
91 91  
92 92  
91 +== 1.4 LED Indicators ==
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
94 +LPS8-V2 has totally four LEDs, They are:
96 96  
97 97  
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
98 98  
99 -== **1.5 LED Indicators** ==
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
100 100  
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 101  
102 -LPS8-V2 has totally four LEDs, They are:
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 103  
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
110 110  
111 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
112 +== 1.5 Button Intruction ==
112 112  
113 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
114 114  
115 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
115 +LPS8-V2 has a black toggle button, which is:
116 116  
117 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
118 118  
118 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 119  
120 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 120  
121 -= **2. Quick Start** =
122 122  
123 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 123  
125 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
126 +
127 +
128 += 2. Quick Start =
129 +
130 +
124 124  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
125 125  
126 126  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
127 127  
128 128  
136 +== 2.1 Access and Configure LPS8-V2 ==
129 129  
130 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
138 +=== 2.1.1 Find IP address of LPS8-V2 ===
131 131  
132 132  
133 -== **2.1.1 connect the network.** ==
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
134 134  
135 -=== ===
136 136  
137 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
138 138  
146 +(% style="background-color:yellow" %)**dragino+dragino**
139 139  
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
140 140  (((
141 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
160 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
142 142  )))
143 143  
144 144  (((
... ... @@ -149,33 +149,43 @@
149 149  
150 150  
151 151  
152 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
153 153  
154 154  
155 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
174 +[[image:image-20230107084650-2.png||height="310" width="839"]]
156 156  
157 157  
158 -(((
159 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
160 -)))
177 +(% style="color:blue" %)**Steps to connect via fallback IP:**
161 161  
179 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
162 162  
181 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
163 163  
164 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
165 165  
166 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
184 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
167 167  
168 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
169 169  
170 -[[image:image-20220622101433-4.png]]
187 +As in the below photo:
171 171  
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
172 172  
173 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
174 174  
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
175 175  
176 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
177 177  
178 178  
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
198 +
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
200 +
201 +
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
205 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
206 +
207 +
179 179  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
180 180  
181 181  
... ... @@ -189,32 +189,125 @@
189 189  [[image:image-20220622102847-7.png]]
190 190  
191 191  
192 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
221 +[[image:image-20220622102901-8.png||height="476" width="938"]]
193 193  
194 194  
224 +=== 2.1.2 Access Configure Web UI ===
195 195  
196 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
197 197  
227 +**Web Interface**
198 198  
199 -=== **2.2.1 Select your area frequency** ===
229 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
200 200  
201 201  
232 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
233 +
234 +You will see the login interface of LPS8-V2 as shown below.
235 +
236 +The account details for Web Login are:
237 +
238 +(% style="color:blue" %)**User Name: root**
239 +
240 +(% style="color:blue" %)**Password:   dragino**
241 +
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
243 +
244 +
245 +== 2.2  Typical Network Setup ==
246 +
247 +=== 2.2.1  Overview ===
248 +
249 +
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +=== 2.2.2  Use WAN port to access Internet ===
259 +
260 +
261 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 +
263 +
264 +[[image:image-20230411100633-2.png||height="501" width="935"]]
265 +
266 +
267 +=== 2.2.3  Access the Internet as a WiFi Client ===
268 +
269 +
270 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 +
272 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 +
274 +[[image:image-20230411095739-1.png||height="264" width="691"]]
275 +
276 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 +
278 +
279 +=== 2.2.4  Use built-in 4G modem for internet access ===
280 +
281 +
282 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 +
284 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 +
286 +
287 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 +
289 +First, install the Micro SIM card as below direction
290 +
291 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 +
293 +
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 +
296 +
297 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 +
299 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 +
301 +
302 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 +
304 +
305 +=== 2.2.5  Check Internet connection ===
306 +
307 +
308 +In the **home** page, we can check the Internet connection.
309 +
310 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
311 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
312 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
313 +
314 +[[image:image-20230411101534-3.png||height="544" width="942"]]
315 +
316 +
317 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
318 +
319 +=== 2.3.1 Select your area frequency ===
320 +
321 +
202 202  (((
203 203  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
324 +
325 +
204 204  )))
205 205  
206 -[[image:image-20220622103332-9.png]]
328 +[[image:image-20220622103332-9.png||height="485" width="938"]]
207 207  
208 208  
331 +=== 2.3.2 Get the only gateway EUI ===
209 209  
210 -=== **2.2.2 Get the only gateway EUI** ===
211 211  
212 -
213 213  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
214 214  
215 -[[image:image-20220622103355-10.png]]
216 216  
337 +[[image:image-20220622103355-10.png||height="698" width="949"]]
217 217  
339 +
218 218  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
219 219  
220 220  
... ... @@ -230,10 +230,9 @@
230 230  [[image:image-20220622103956-12.png]]
231 231  
232 232  
355 +=== 2.3.3 Register the gateway to The Things Network ===
233 233  
234 -== 2.2.3 Register the gateway to The Things Network ==
235 235  
236 -
237 237  **Login to The Things Network**
238 238  
239 239  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -247,204 +247,545 @@
247 247  **Get it online**
248 248  
249 249  
371 += 3. Web Configure Pages =
250 250  
251 -= **3. Web Configure Pages** =
373 +== 3.1 Home ==
252 252  
253 253  
254 -== **3.1 Home** ==
376 +Shows the system running status:
255 255  
378 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
256 256  
257 -//Shows the system running status~://
258 258  
381 +== 3.2 LoRa Settings ==
259 259  
260 -== **3.2 LoRa Settings** ==
383 +=== 3.2.1 LoRa ~-~-> LoRa ===
261 261  
262 262  
263 -=== **3.2.1 LoRa ~-~-> LoRa** ===
386 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
264 264  
388 +Different LPS8v2 hardware versions can support different frequency ranges:
265 265  
266 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
390 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
391 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
267 267  
268 -//Different LPS8v2 hardware versions can support different frequency ranges~://
393 +(% class="wikigeneratedid" %)
394 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
269 269  
270 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
271 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
272 272  
273 273  (% class="wikigeneratedid" %)
274 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
275 -
276 -(% class="wikigeneratedid" %)
277 277  [[image:image-20220616110739-1.png||height="372" width="682"]]
278 278  
279 279  
280 280  (((
281 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
402 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
282 282  )))
283 283  
284 284  
406 +== 3.3 LoRaWAN Settings ==
285 285  
286 -== **3.3 LoRaWAN Settings** ==
408 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
287 287  
288 288  
289 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
411 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
290 290  
291 291  
292 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
293 -
294 294  [[image:image-20220616111932-2.png||height="516" width="672"]]
295 295  
296 296  
417 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
297 297  
298 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
299 299  
420 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
300 300  
301 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
302 302  
303 303  [[image:image-20220616113246-3.png||height="396" width="672"]]
304 304  
305 305  
306 306  (((
307 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
427 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
308 308  )))
309 309  
310 310  
431 +== 3.4 Network Settings ==
311 311  
312 -== **3.4 Network Settings** ==
433 +=== 3.4.1 Network ~-~-> WiFi ===
313 313  
435 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
314 314  
315 -=== **3.4.1 Network ~-~-> WiFi** ===
437 +[[image:image-20230619095946-1.png||height="332" width="827"]]
316 316  
317 317  
318 -[[image:image-20220616114756-4.png||height="251" width="669"]]
440 +=== 3.4.2 Network ~-~-> System Status ===
319 319  
320 320  
443 +[[image:image-20220820134112-2.png||height="539" width="668"]]
321 321  
322 -=== **3.4.2 Network ~-~-> System Status** ===
323 323  
446 +=== 3.4.3 Network ~-~-> Network ===
324 324  
325 -[[image:image-20220616115229-5.png||height="548" width="665"]]
326 326  
449 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
327 327  
451 +[[image:image-20230214093657-2.png||height="333" width="858"]]
328 328  
329 -=== **3.4.3 Network ~-~-> Firewall** ===
330 330  
454 +=== 3.4.4 Network ~-~-> Cellular ===
331 331  
332 -[[image:image-20220616115351-6.png||height="244" width="661"]]
333 333  
457 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
334 334  
459 +(% style="color:red" %)**Note: APN cannot be empty.**
335 335  
336 -== **3.5 System** ==
461 +[[image:image-20230228115126-1.png]]
337 337  
338 338  
339 -=== **3.5.1  System ~-~-> System Overview** ===
464 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
340 340  
466 +[[image:image-20230228115535-2.png||height="478" width="888"]]
341 341  
468 +
469 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
470 +
471 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
472 +
473 +
474 +== 3.5 System ==
475 +
476 +=== 3.5.1 System ~-~-> System Overview ===
477 +
478 +
342 342  Shows the system info:
343 343  
481 +[[image:image-20220917144512-5.png||height="618" width="853"]]
344 344  
345 345  
346 -=== **3.5.2 System ~-~-> Backup/Restore** ===
484 +=== 3.5.2 System ~-~-> System General ===
347 347  
348 348  
349 -[[image:image-20220616115808-7.png||height="194" width="649"]]
487 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
350 350  
489 +In addition, Users can customize the FallBack IP address.
351 351  
491 +[[image:image-20230214094058-3.png]]
352 352  
353 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
354 354  
494 +=== 3.5.3 System ~-~-> Backup/Restore ===
355 355  
356 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
357 357  
358 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
497 +[[image:image-20220917144725-6.png||height="208" width="869"]]
359 359  
360 360  
500 +=== 3.5.4 System ~-~-> Remoteit ===
501 +
502 +
503 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
504 +
505 +
506 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
507 +
508 +[[image:image-20221230092303-2.png]]
509 +
510 +
511 +=== 3.5.5 System ~-~-> Package Management ===
512 +
513 +
514 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
515 +
516 +[[image:image-20230214094316-4.png]]
517 +
518 +
519 += 4. Build-in Server =
520 +
521 +
522 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
523 +
524 +[[image:image-20230616175617-8.png||height="390" width="894"]]
525 +
526 +[[image:image-20230616175558-7.png||height="362" width="894"]]
527 +
528 +
529 +
530 +(% style="color:red" %)**Note:**
531 +
532 + **Path**: Server ~-~-> Network Server
533 +
534 + Server ~-~-> Application Server
535 +
536 +
537 +**Troubleshooting:**
538 +
539 +
540 +**~ 1. URL does not jump properly**
541 +
542 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
543 +
544 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
545 +
546 +
547 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
548 +
549 +
550 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
551 +
361 361  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
362 362  
363 363  
364 364  Login account:
365 365  
366 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
557 +**Username : ** (% style="background-color:yellow" %)**admin**
367 367  
368 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
559 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
369 369  
561 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
370 370  
371 -[[image:image-20220725171719-1.png||height="570" width="769"]]
372 372  
373 373  
565 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
566 +
567 +
568 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
569 +
570 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
571 +
572 +[[image:image-20230321092456-1.png]]
573 +
574 +
575 +
576 +== 4.2 Application Server ~-~- Node-Red ==
577 +
578 +
579 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
580 +
581 +
582 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
583 +
584 +
585 +[[image:image-20220725172124-3.png||height="610" width="843"]]
586 +
587 +
588 +
589 +=== **Using Node-Red, InfluxDB and Grafana** ===
590 +
591 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
592 +
593 +
594 +the users can refer to this link to install them.
595 +
596 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
597 +
598 +
599 +=== **Upgrade the node.js** ===
600 +
601 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
602 +
603 +
604 +the users can refer to this link to upgrade them.
605 +
606 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
607 +
608 +
609 +== 4.3 How to disable the built-in server ==
610 +
611 +
612 +Use the following commands to start and stop the TTNv3 service:
613 +
614 +(% class="box infomessage" %)
374 374  (((
375 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
376 - You can complete the installation manually with the following command.**
616 +**# start**
617 +systemctl start ttnstack
618 +
619 +**# stop**
620 +systemctl stop ttnstack
621 +
622 +**# enable**
623 +systemctl enable ttnstack
624 +
625 +**#disable**
626 +systemctl disable ttnstack
377 377  )))
378 378  
629 +Use the following commands to start and stop the Node-Red service:
379 379  
380 380  (% class="box infomessage" %)
381 381  (((
382 -(((
383 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
633 +**# start**
634 +systemctl start nodered
635 +
636 +**# stop**
637 +systemctl stop nodered
638 +
639 +**# enable**
640 +systemctl enable nodered
641 +
642 +**#disable**
643 +systemctl disable nodered
384 384  )))
385 385  
646 +
647 +== 4.4 How to use ChirpStack on LPS8-V2 ==
648 +
649 +
650 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
651 +
652 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
653 +
654 +
655 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
656 +
657 +
658 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
659 +
660 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
661 +
662 +[[image:image-20230602140406-3.png||height="480" width="918"]]
663 +
664 +
665 +When the configuration is complete, click** "Save&Apply"**.
666 +
667 +
668 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 +
670 +[[image:image-20230602143122-4.png||height="511" width="983"]]
671 +
672 +
673 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
674 +
675 +
676 +
677 += 6. How users can access LPS8-V2 using serial USB =
678 +
679 +
680 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
681 +
682 +Port 1 of the UART on the LPS8-V2 is GND
683 +
684 +(% class="box infomessage" %)
386 386  (((
387 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
686 +**TXD  <~-~--> UART RXD (Gray line)**
687 +
688 +**RXD  <~-~--> UART TXD (White line)**
689 +
690 +**GND <~-~--> GND (Black line)**
388 388  )))
389 -)))
390 390  
693 +**LPS8v2 UART connection photo**
391 391  
695 +[[image:image-20230421094319-2.png||height="351" width="392"]]
392 392  
393 -= **5. Build-in Application Server ~-~- Node-Red** =
697 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
394 394  
395 395  
396 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
700 +[[image:image-20220804164928-3.png||height="320" width="332"]]
397 397  
398 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
399 399  
703 +[[image:image-20220804164747-2.png||height="622" width="594"]]
400 400  
401 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
402 402  
706 += 7. OTA System Update =
403 403  
404 -[[image:image-20220725172124-3.png||height="610" width="843"]]
405 405  
709 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
406 406  
711 +
712 +== 7.1 Auto-update method ==
713 +
714 +
715 +The default, each gateway will enable the auto-update function.
716 +
717 +this function will be triggered every boot and every midnight.
718 +
719 +
720 +Users can enable/disable it via Web Page
721 +
722 +[[image:image-20230607094447-2.png]]
723 +
724 +
725 +== 7.2 Manual upgrade method ==
726 +
727 +
728 +1). Using the Linux command to upgrade the system
729 +
730 +
731 +(% class="box infomessage" %)
407 407  (((
408 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
409 - You can complete the installation manually with the following command.**
733 +**apt update && apt install *dragino***
410 410  )))
411 411  
412 412  
737 +2). Upgrade the system via the Web page button of "Manual Update"
413 413  
739 +
740 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
741 +
742 +[[image:image-20230607093849-1.png]]
743 +
744 +
745 +
746 += 8. FAQ =
747 +
748 +== 8.1 How to change Hostname ==
749 +
750 +
751 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
752 +
414 414  (% class="box infomessage" %)
415 415  (((
416 -(((
417 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
418 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
755 +hostnamectl set-hostname dragino-123456
419 419  )))
420 -)))
421 421  
422 -[[image:image-20220728102000-1.png]]
758 +[[image:image-20230517102429-1.png]]
423 423  
760 +After the configuration is complete, run "reboot" to restart the gateway.
424 424  
425 425  
426 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
763 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
427 427  
428 428  
766 +Migrate guide:
767 +
768 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
769 +
770 +**2. On the Server ~-~-> Network Server interface, click "Management"**
771 +
772 +[[image:image-20230616162454-1.png]]
773 +
774 +
775 +**3. Click "Migrate-Chirpstack"**
776 +
777 +[[image:image-20230616162742-2.png]]
778 +
779 +
780 +**4. Strat Install **
781 +
782 +
783 +Click start Install and wait until the migration succeeds
784 +
785 +[[image:image-20230616162934-3.png]]
786 +
787 +
788 +**5.Migration complete check result**
789 +
790 +[[image:image-20230616174526-4.png||height="706" width="983"]]
791 +
792 +
793 +[[image:image-20230616180004-9.png]]
794 +
795 +
796 +== 8.3 How to reduce the 4g data consumed ==
797 +
798 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
799 +
800 +
801 +[[image:image-20230719100239-1.png||height="724" width="994"]]
802 +
803 +
804 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
805 +
806 +[[image:image-20230719100332-2.png]]
807 +
808 +3. Disable the auto-update:
809 +
810 +[[image:image-20230719100419-3.png||height="458" width="995"]]
811 +
812 +
813 +
814 +
815 += 9. Trouble Shooting =
816 +
817 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
818 +
819 +
820 +[[image:image-20220920135918-1.png]]
821 +
822 +
823 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
824 +
825 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
826 +
827 +
828 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
829 +
830 +**Click the update URL button to configure the URL with the current eth port address.**
831 +
832 +[[image:image-20220920141936-2.png]]
833 +
834 +
835 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
836 +
837 +
838 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
839 +
840 +[[image:image-20230508171607-1.png]]
841 +
842 +
843 +== 9.3  Fallback IP does not work, how can users check ==
844 +
845 +
846 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
847 +
848 +
849 +**1.Check whether the configuration is correct**
850 +
851 +Run the CMD command to ipconfig and ping 172.31.255.254.
852 +
853 +If this fails, the user needs to reconfigure.
854 +
855 +[[image:image-20230413170224-3.png||height="433" width="707"]]
856 +
857 +[[image:image-20230413170246-4.png]]
858 +
859 +
860 +**2. Check whether the firewall is disabled**
861 +
862 +If the firewall is not down, this will affect access to the gateway.
863 +
864 +
865 +== 9.4  Click "Manual_Update", why there is no response? ==
866 +
867 +
868 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
869 +
870 +
871 +[[image:image-20230527090555-3.png||height="660" width="832"]]
872 +
873 +
874 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
875 +
876 +
877 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
878 +
879 +
880 +(% class="box infomessage" %)
429 429  (((
430 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
882 +apt update && apt install dragino-fallback
883 +
884 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
431 431  )))
432 432  
887 +
888 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
889 +
890 +
433 433  (((
434 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
892 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
893 +)))
435 435  
895 +(((
896 +With your question as detailed as possible. We will reply and help you in the shortest.
436 436  
437 437  
438 -= **11 Reference** =
899 += 11. Reference =
439 439  
440 440  
441 441  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
903 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
442 442  
443 443  
444 444  
445 445  )))
446 446  
447 -= **12. Order Info** =
909 += 12. Order Info =
448 448  
449 449  
450 450  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -452,27 +452,33 @@
452 452  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
453 453  
454 454  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
917 +
455 455  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
919 +
456 456  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
921 +
457 457  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
923 +
458 458  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
925 +
459 459  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
460 460  
461 -
462 462  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
463 463  
464 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
465 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
466 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
467 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
930 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
468 468  
469 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
932 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
470 470  
934 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
471 471  
936 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
472 472  
473 -= **13. Manufacturer Info** =
938 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
474 474  
475 475  
941 += 13. Manufacturer Info =
942 +
943 +
476 476  **Shenzhen Dragino Technology Development co. LTD**
477 477  
478 478  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -480,10 +480,9 @@
480 480  LongCheng Street, LongGang District ; Shenzhen 518116,China
481 481  
482 482  
951 += 14. FCC Warning =
483 483  
484 -= **14. FCC Warning** =
485 485  
486 -
487 487  (((
488 488  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
489 489  )))
... ... @@ -512,5 +512,7 @@
512 512  
513 513  (((
514 514  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
982 +
983 +
515 515  )))
516 516  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0