Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 69.12 >
edited by Xiaoling
on 2022/07/28 17:54
To version < 128.2 >
edited by Xiaoling
on 2023/01/06 17:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,8 +50,6 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,8 +58,6 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 65  * Work Temperature: -20 ~~ 65°C
... ... @@ -68,11 +68,9 @@
68 68  
69 69  
70 70  
69 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -90,55 +90,65 @@
90 90  
91 91  
92 92  
89 +== 1.4 Block Diagram ==
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
96 96  
93 +== 1.5 LED Indicators ==
97 97  
98 98  
99 -== **1.5 LED Indicators** ==
100 -
101 -
102 102  LPS8-V2 has totally four LEDs, They are:
103 103  
104 104  
105 105  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
107 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
108 108  
109 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
110 110  
111 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
112 112  
113 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
114 114  
115 115  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
116 116  
117 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
118 118  
119 119  
114 +== 1.6 Button Intruction ==
120 120  
121 -= **2. Quick Start** =
122 122  
117 +LPS8-V2 has a black toggle button, which is:
123 123  
124 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
125 125  
126 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
127 127  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
128 128  
129 129  
130 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
131 131  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
132 132  
133 -== **2.1.1 connect the network.** ==
134 134  
135 -=== ===
130 += 2. Quick Start =
136 136  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
137 137  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
138 138  
139 139  
140 140  (((
141 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
142 142  )))
143 143  
144 144  (((
... ... @@ -155,66 +155,66 @@
155 155  [[image:image-20220622100542-2.png||height="369" width="1256"]]
156 156  
157 157  
158 -(((
159 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
160 -)))
164 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
161 161  
162 162  
167 +[[image:image-20220622102702-6.png]]
163 163  
164 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
165 165  
166 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
167 167  
168 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
171 +**Wi-Fi configuration successful**
169 169  
170 -[[image:image-20220622101433-4.png]]
171 171  
174 +[[image:image-20220622102847-7.png]]
172 172  
173 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
174 174  
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
175 175  
176 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
177 177  
180 +== 2.1.2 Access Configure Web UI ==
178 178  
179 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
180 180  
183 +**Web Interface**
181 181  
182 -[[image:image-20220622102702-6.png]]
185 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
183 183  
184 184  
188 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
185 185  
186 -**Wi-Fi configuration successful**
190 +You will see the login interface of LPS8-V2 as shown below.
187 187  
192 +The account details for Web Login are:
188 188  
189 -[[image:image-20220622102847-7.png]]
194 +(% style="color:#4f81bd" %)**User Name: root**
190 190  
196 +(% style="color:#4f81bd" %)**Password:   dragino**
191 191  
192 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
198 +[[image:image-20230106153501-1.png||height="367" width="894"]]
193 193  
194 194  
201 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
195 195  
196 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
203 +=== 2.2.1 Select your area frequency ===
197 197  
198 198  
199 -=== **2.2.1 Select your area frequency** ===
200 -
201 -
202 202  (((
203 203  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
208 +
209 +
204 204  )))
205 205  
206 -[[image:image-20220622103332-9.png]]
212 +[[image:image-20220622103332-9.png||height="485" width="938"]]
207 207  
208 208  
215 +=== 2.2.2 Get the only gateway EUI ===
209 209  
210 -=== **2.2.2 Get the only gateway EUI** ===
211 211  
212 -
213 213  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
214 214  
215 -[[image:image-20220622103355-10.png]]
216 216  
221 +[[image:image-20220622103355-10.png||height="698" width="949"]]
217 217  
223 +
218 218  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
219 219  
220 220  
... ... @@ -230,7 +230,6 @@
230 230  [[image:image-20220622103956-12.png]]
231 231  
232 232  
233 -
234 234  == 2.2.3 Register the gateway to The Things Network ==
235 235  
236 236  
... ... @@ -247,20 +247,19 @@
247 247  **Get it online**
248 248  
249 249  
255 += 3. Web Configure Pages =
250 250  
251 -= **3. Web Configure Pages** =
257 +== 3.1 Home ==
252 252  
253 253  
254 -== **3.1 Home** ==
255 -
256 -
257 257  //Shows the system running status~://
258 258  
262 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
259 259  
260 -== **3.2 LoRa Settings** ==
261 261  
265 +== 3.2 LoRa Settings ==
262 262  
263 -=== **3.2.1 LoRa ~-~-> LoRa** ===
267 +=== 3.2.1 LoRa ~-~-> LoRa ===
264 264  
265 265  
266 266  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -267,97 +267,131 @@
267 267  
268 268  //Different LPS8v2 hardware versions can support different frequency ranges~://
269 269  
270 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
274 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
271 271  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
272 272  
273 273  (% class="wikigeneratedid" %)
274 274  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
275 275  
280 +
276 276  (% class="wikigeneratedid" %)
277 277  [[image:image-20220616110739-1.png||height="372" width="682"]]
278 278  
279 279  
280 280  (((
281 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
286 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
282 282  )))
283 283  
284 284  
290 +== 3.3 LoRaWAN Settings ==
285 285  
286 -== **3.3 LoRaWAN Settings** ==
292 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
287 287  
288 288  
289 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
290 -
291 -
292 292  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
293 293  
297 +
294 294  [[image:image-20220616111932-2.png||height="516" width="672"]]
295 295  
296 296  
301 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
297 297  
298 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
299 299  
300 -
301 301  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
302 302  
306 +
303 303  [[image:image-20220616113246-3.png||height="396" width="672"]]
304 304  
305 305  
306 306  (((
307 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
311 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
308 308  )))
309 309  
310 310  
315 +== 3.4 Network Settings ==
311 311  
312 -== **3.4 Network Settings** ==
317 +=== 3.4.1 Network ~-~-> WiFi ===
313 313  
314 314  
315 -=== **3.4.1 Network ~-~-> WiFi** ===
320 +[[image:image-20220616114756-4.png||height="251" width="669"]]
316 316  
317 317  
318 -[[image:image-20220616114756-4.png||height="251" width="669"]]
323 +=== 3.4.2 Network ~-~-> System Status ===
319 319  
320 320  
326 +[[image:image-20220820134112-2.png||height="539" width="668"]]
321 321  
322 -=== **3.4.2 Network ~-~-> System Status** ===
323 323  
329 +=== 3.4.3 Network ~-~-> Firewall ===
324 324  
325 -[[image:image-20220616115229-5.png||height="548" width="665"]]
326 326  
332 +[[image:image-20220616115351-6.png||height="244" width="661"]]
327 327  
328 328  
329 -=== **3.4.3 Network ~-~-> Firewall** ===
335 +== 3.5 System ==
330 330  
337 +=== 3.5.1 System ~-~-> System Overview ===
331 331  
332 -[[image:image-20220616115351-6.png||height="244" width="661"]]
333 333  
340 +Shows the system info:
334 334  
342 +[[image:image-20220917144512-5.png||height="618" width="853"]]
335 335  
336 -== **3.5 System** ==
337 337  
345 +=== 3.5.2 System ~-~-> System General ===
338 338  
339 -=== **3.5.1  System ~-~-> System Overview** ===
340 340  
348 +In the System-> System General interface, Users can customize the configuration System Password.
341 341  
342 -Shows the system info:
350 +[[image:image-20230106154302-2.png||height="345" width="868"]]
343 343  
344 344  
353 +=== 3.5.3 System ~-~-> Backup/Restore ===
345 345  
346 -=== **3.5.2 System ~-~-> Backup/Restore** ===
347 347  
356 +[[image:image-20220917144725-6.png||height="208" width="869"]]
348 348  
349 -[[image:image-20220616115808-7.png||height="194" width="649"]]
350 350  
359 +=== 3.5.4 System ~-~-> Remoteit ===
351 351  
352 352  
353 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
362 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
354 354  
355 355  
356 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
365 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
357 357  
358 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
367 +[[image:image-20221230092303-2.png]]
359 359  
360 360  
370 += 4. Build-in Server =
371 +
372 +
373 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
374 +
375 +
376 +[[image:image-20220820115644-1.png||height="217" width="778"]]
377 +
378 +
379 +(% style="color:red" %)**Note:**
380 +
381 + **Path**: System ~-~-> Built-in Server
382 +
383 +
384 +**Troubleshooting:**
385 +
386 +
387 +**~ 1. URL does not jump properly**
388 +
389 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
390 +
391 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
392 +
393 +
394 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
395 +
396 +
397 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
398 +
361 361  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
362 362  
363 363  
... ... @@ -371,61 +371,187 @@
371 371  [[image:image-20220725171719-1.png||height="570" width="769"]]
372 372  
373 373  
412 +== 4.2 Application Server ~-~- Node-Red ==
413 +
414 +
415 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
416 +
417 +
418 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
419 +
420 +
421 +[[image:image-20220725172124-3.png||height="610" width="843"]]
422 +
423 +
424 +
425 +=== **Using Node-Red, InfluxDB and Grafana** ===
426 +
427 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
428 +
429 +
430 +the users can refer to this link to install them.
431 +
432 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
433 +
434 +
435 += 5. How users can access LPS8v2 using serial USB =
436 +
437 +
438 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
439 +
440 +
441 +Port 1 of the UART on the LPS8v2 is GND
442 +
443 +(% class="box infomessage" %)
374 374  (((
375 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
376 - You can complete the installation manually with the following command.**
445 +**TXD  <~-~--> UART RXD (Gray line)**
446 +
447 +**RXD  <~-~--> UART TXD (White line)**
448 +
449 +**GND <~-~--> GND (Black line)**
377 377  )))
378 378  
379 379  
453 +**LPS8v2 UART connection photo**
454 +
455 +[[image:image-20220804163015-1.png||height="621" width="466"]]
456 +
457 +
458 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
459 +
460 +
461 +[[image:image-20220804164928-3.png||height="320" width="332"]]
462 +
463 +
464 +[[image:image-20220804164747-2.png||height="622" width="594"]]
465 +
466 +
467 += 6. Use the helium gateway-rs as the Data-only Hotspot =
468 +
469 +
470 +== **Step 1: Configure Frequency Band** ==
471 +
472 +
473 +//Each country has a requirement for frequency region. Choose the right one for your area.//
474 +
475 +[[image:image-20220905164308-1.png]]
476 +
477 +
478 +
479 +== **Step 2: Configure the forward address** ==
480 +
481 +
482 +**Select one of the servers to configure.**
483 +
484 +**For example:**
485 +
486 +[[image:image-20220905164847-2.png]]
487 +
488 +
489 +
490 +== **Step 3: Download and Install the Helium-gateway-rs** ==
491 +
492 +
493 +**Access the gateway CLI via SSH.**
494 +
495 +[[image:image-20220905165222-3.png]]
496 +
497 +
498 +**Download gateway-rs.**
499 +
500 +[[image:image-20220905165715-5.png]]
501 +
380 380  (% class="box infomessage" %)
381 381  (((
382 -(((
383 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
504 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
384 384  )))
385 385  
507 +
508 +**Install gateway-rs.**
509 +
510 +[[image:image-20220905165917-7.png]]
511 +
512 +(% class="box infomessage" %)
386 386  (((
387 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
514 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
388 388  )))
389 -)))
390 390  
391 391  
518 +**Modify configuration.**
392 392  
393 -= **5. Build-in Application Server ~-~- Node-Red** =
394 394  
521 +[[image:image-20220905173847-12.png]]
395 395  
396 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
397 397  
398 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
524 +(% class="box infomessage" %)
525 +(((
526 +**region=<Enter regional parameters> \
527 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
528 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
529 +)))
399 399  
400 400  
401 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
532 +**Restart the helium_gateway**
402 402  
534 +[[image:image-20220905170920-9.png]]
403 403  
404 -[[image:image-20220725172124-3.png||height="610" width="843"]]
405 405  
406 -
537 +(% class="box infomessage" %)
407 407  (((
408 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
409 - You can complete the installation manually with the following command.**
539 +**systemctl restart helium_gateway**
410 410  )))
411 411  
412 412  
543 +**Check the helium_gateway Log：**
413 413  
545 +[[image:image-20220905173952-13.png]]
546 +
547 +
414 414  (% class="box infomessage" %)
415 415  (((
416 -(((
417 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
418 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
550 +**journalctl -u helium_gateway -f**
419 419  )))
420 -)))
421 421  
422 -[[image:image-20220728102000-1.png]]
423 423  
554 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
424 424  
556 +where the helium gateway log is shown:
425 425  
426 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
558 +[[image:image-20220905174534-14.png]]
427 427  
428 428  
561 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
562 +
563 +
564 += 7. OTA System Update =
565 +
566 +
567 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
568 +
569 +
570 += 8. Trouble Shooting =
571 +
572 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
573 +
574 +
575 +[[image:image-20220920135918-1.png]]
576 +
577 +
578 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
579 +
580 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
581 +
582 +
583 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
584 +
585 +**Click the update URL button to configure the URL with the current eth port address.**
586 +
587 +[[image:image-20220920141936-2.png]]
588 +
589 +
590 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
591 +
592 +
429 429  (((
430 430  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
431 431  )))
... ... @@ -434,17 +434,17 @@
434 434  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
435 435  
436 436  
601 += 10. Reference =
437 437  
438 -= **11 Reference** =
439 439  
440 -
441 441  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
605 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
442 442  
443 443  
444 444  
445 445  )))
446 446  
447 -= **12. Order Info** =
611 += 11. Order Info =
448 448  
449 449  
450 450  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -458,7 +458,6 @@
458 458  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
459 459  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
460 460  
461 -
462 462  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
463 463  
464 464  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -469,10 +469,9 @@
469 469  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
470 470  
471 471  
635 += 12. Manufacturer Info =
472 472  
473 -= **13. Manufacturer Info** =
474 474  
475 -
476 476  **Shenzhen Dragino Technology Development co. LTD**
477 477  
478 478  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -480,10 +480,9 @@
480 480  LongCheng Street, LongGang District ; Shenzhen 518116,China
481 481  
482 482  
645 += 13. FCC Warning =
483 483  
484 -= **14. FCC Warning** =
485 485  
486 -
487 487  (((
488 488  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
489 489  )))
... ... @@ -512,5 +512,7 @@
512 512  
513 513  (((
514 514  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
676 +
677 +
515 515  )))
516 516  )))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0