Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 69.11 >
edited by Xiaoling
on 2022/07/28 17:50
To version < 120.1 >
edited by Kilight Cao
on 2022/12/30 09:23
>
Change comment: Uploaded new attachment "image-20221230092331-3.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,8 +50,6 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,8 +58,6 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 65  * Work Temperature: -20 ~~ 65°C
... ... @@ -68,11 +68,9 @@
68 68  
69 69  
70 70  
69 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -90,50 +90,60 @@
90 90  
91 91  
92 92  
89 +== 1.4 Block Diagram ==
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
96 96  
93 +== 1.5 LED Indicators ==
97 97  
98 98  
99 -== **1.5 LED Indicators** ==
100 -
101 -
102 102  LPS8-V2 has totally four LEDs, They are:
103 103  
104 104  
105 105  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
107 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
108 108  
109 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
110 110  
111 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
112 112  
113 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
114 114  
115 115  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
116 116  
117 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
118 118  
119 119  
114 +== 1.6 Button Intruction ==
120 120  
121 -= **2. Quick Start** =
122 122  
117 +LPS8-V2 has a black toggle button, which is:
123 123  
124 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
125 125  
126 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
127 127  
122 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
128 128  
129 129  
130 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
131 131  
127 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
132 132  
133 -== **2.1.1 connect the network.** ==
134 134  
135 -=== ===
130 += 2. Quick Start =
136 136  
132 +
133 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 +
135 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 +
137 +
138 +== 2.1 Connects to the network and accesses the gateway Web UI ==
139 +
140 +== 2.1.1 connect the network ==
141 +
142 +
137 137  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
138 138  
139 139  
... ... @@ -155,27 +155,6 @@
155 155  [[image:image-20220622100542-2.png||height="369" width="1256"]]
156 156  
157 157  
158 -(((
159 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
160 -)))
161 -
162 -
163 -
164 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
165 -
166 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
167 -
168 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
169 -
170 -[[image:image-20220622101433-4.png]]
171 -
172 -
173 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
174 -
175 -
176 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
177 -
178 -
179 179  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
180 180  
181 181  
... ... @@ -189,30 +189,32 @@
189 189  [[image:image-20220622102847-7.png]]
190 190  
191 191  
192 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 +[[image:image-20220622102901-8.png||height="476" width="938"]]
193 193  
194 194  
180 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
195 195  
196 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 +=== 2.2.1 Select your area frequency ===
197 197  
198 198  
199 -=== **2.2.1 Select your area frequency** ===
200 -
201 -
185 +(((
202 202  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
203 203  
204 -[[image:image-20220622103332-9.png]]
188 +
189 +)))
205 205  
191 +[[image:image-20220622103332-9.png||height="485" width="938"]]
206 206  
207 207  
208 -=== **2.2.2 Get the only gateway EUI** ===
194 +=== 2.2.2 Get the only gateway EUI ===
209 209  
210 210  
211 211  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
212 212  
213 -[[image:image-20220622103355-10.png]]
214 214  
200 +[[image:image-20220622103355-10.png||height="698" width="949"]]
215 215  
202 +
216 216  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
217 217  
218 218  
... ... @@ -228,7 +228,6 @@
228 228  [[image:image-20220622103956-12.png]]
229 229  
230 230  
231 -
232 232  == 2.2.3 Register the gateway to The Things Network ==
233 233  
234 234  
... ... @@ -245,20 +245,19 @@
245 245  **Get it online**
246 246  
247 247  
234 += 3. Web Configure Pages =
248 248  
249 -= **3. Web Configure Pages** =
236 +== 3.1 Home ==
250 250  
251 251  
252 -== **3.1 Home** ==
253 -
254 -
255 255  //Shows the system running status~://
256 256  
241 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
257 257  
258 -== **3.2 LoRa Settings** ==
259 259  
244 +== 3.2 LoRa Settings ==
260 260  
261 -=== **3.2.1 LoRa ~-~-> LoRa** ===
246 +=== 3.2.1 LoRa ~-~-> LoRa ===
262 262  
263 263  
264 264  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -265,95 +265,112 @@
265 265  
266 266  //Different LPS8v2 hardware versions can support different frequency ranges~://
267 267  
268 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
253 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
269 269  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
270 270  
271 271  (% class="wikigeneratedid" %)
272 272  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
273 273  
259 +
274 274  (% class="wikigeneratedid" %)
275 275  [[image:image-20220616110739-1.png||height="372" width="682"]]
276 276  
277 277  
278 278  (((
279 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
280 280  )))
281 281  
282 282  
269 +== 3.3 LoRaWAN Settings ==
283 283  
284 -== **3.3 LoRaWAN Settings** ==
271 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
285 285  
286 286  
287 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
288 -
289 -
290 290  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291 291  
276 +
292 292  [[image:image-20220616111932-2.png||height="516" width="672"]]
293 293  
294 294  
280 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
295 295  
296 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
297 297  
298 -
299 299  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
300 300  
285 +
301 301  [[image:image-20220616113246-3.png||height="396" width="672"]]
302 302  
303 303  
304 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
289 +(((
290 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
291 +)))
305 305  
306 306  
294 +== 3.4 Network Settings ==
307 307  
308 -== **3.4 Network Settings** ==
296 +=== 3.4.1 Network ~-~-> WiFi ===
309 309  
310 310  
311 -=== **3.4.1 Network ~-~-> WiFi** ===
299 +[[image:image-20220616114756-4.png||height="251" width="669"]]
312 312  
313 313  
314 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== 3.4.2 Network ~-~-> System Status ===
315 315  
316 316  
305 +[[image:image-20220820134112-2.png||height="539" width="668"]]
317 317  
318 -=== **3.4.2 Network ~-~-> System Status** ===
319 319  
308 +=== 3.4.3 Network ~-~-> Firewall ===
320 320  
321 -[[image:image-20220616115229-5.png||height="548" width="665"]]
322 322  
311 +[[image:image-20220616115351-6.png||height="244" width="661"]]
323 323  
324 324  
325 -=== **3.4.3 Network ~-~-> Firewall** ===
314 +== 3.5 System ==
326 326  
316 +=== 3.5.1  System ~-~-> System Overview ===
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
329 329  
319 +Shows the system info:
330 330  
321 +[[image:image-20220917144512-5.png||height="618" width="853"]]
331 331  
332 -== **3.5 System** ==
333 333  
324 +=== 3.5.2 System ~-~-> Backup/Restore ===
334 334  
335 -=== **3.5.1  System ~-~-> System Overview** ===
336 336  
327 +[[image:image-20220917144725-6.png||height="208" width="869"]]
337 337  
338 -Shows the system info:
339 339  
330 += 4. Build-in Server =
340 340  
341 341  
342 -=== **3.5.2 System ~-~-> Backup/Restore** ===
333 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
343 343  
344 344  
345 -[[image:image-20220616115808-7.png||height="194" width="649"]]
336 +[[image:image-20220820115644-1.png||height="217" width="778"]]
346 346  
347 347  
339 +(% style="color:red" %)**Note:**
348 348  
349 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
341 + **Path**: System ~-~-> Built-in Server
350 350  
351 351  
352 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
344 +**Troubleshooting:**
353 353  
354 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
355 355  
347 +**~ 1. URL does not jump properly**
356 356  
349 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
350 +
351 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
352 +
353 +
354 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
355 +
356 +
357 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
358 +
357 357  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
358 358  
359 359  
... ... @@ -367,52 +367,189 @@
367 367  [[image:image-20220725171719-1.png||height="570" width="769"]]
368 368  
369 369  
370 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
371 - You can complete the installation manually with the following command.**
372 +== 4.2 Application Server ~-~- Node-Red ==
372 372  
373 373  
375 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
376 +
377 +
378 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
379 +
380 +
381 +[[image:image-20220725172124-3.png||height="610" width="843"]]
382 +
383 +
384 +
385 +=== **Using Node-Red, InfluxDB and Grafana** ===
386 +
387 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
388 +
389 +
390 +the users can refer to this link to install them.
391 +
392 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 +
394 +
395 += 5. How users can access LPS8v2 using serial USB =
396 +
397 +
398 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 +
400 +
401 +Port 1 of the UART on the LPS8v2 is GND
402 +
374 374  (% class="box infomessage" %)
375 375  (((
376 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
405 +**TXD  <~-~--> UART RXD (Gray line)**
377 377  
378 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
407 +**RXD  <~-~--> UART TXD (White line)**
408 +
409 +**GND <~-~--> GND (Black line)**
379 379  )))
380 380  
381 381  
413 +**LPS8v2 UART connection photo**
382 382  
383 -= **5. Build-in Application Server ~-~- Node-Red** =
415 +[[image:image-20220804163015-1.png||height="621" width="466"]]
384 384  
385 385  
386 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
387 387  
388 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
419 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
389 389  
390 390  
391 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
422 +[[image:image-20220804164928-3.png||height="320" width="332"]]
392 392  
393 393  
394 -[[image:image-20220725172124-3.png||height="610" width="843"]]
425 +[[image:image-20220804164747-2.png||height="622" width="594"]]
395 395  
396 396  
397 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
398 - You can complete the installation manually with the following command.**
428 += 6. Use the helium gateway-rs as the Data-only Hotspot =
399 399  
400 400  
431 +== **Step 1: Configure Frequency Band** ==
401 401  
433 +
434 +//Each country has a requirement for frequency region. Choose the right one for your area.//
435 +
436 +[[image:image-20220905164308-1.png]]
437 +
438 +
439 +
440 +== **Step 2: Configure the forward address** ==
441 +
442 +
443 +**Select one of the servers to configure.**
444 +
445 +**For example:**
446 +
447 +[[image:image-20220905164847-2.png]]
448 +
449 +
450 +
451 +== **Step 3: Download and Install the Helium-gateway-rs** ==
452 +
453 +
454 +**Access the gateway CLI via SSH.**
455 +
456 +[[image:image-20220905165222-3.png]]
457 +
458 +
459 +**Download gateway-rs.**
460 +
461 +[[image:image-20220905165715-5.png]]
462 +
402 402  (% class="box infomessage" %)
403 403  (((
404 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
405 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
465 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
406 406  )))
407 407  
408 -[[image:image-20220728102000-1.png]]
409 409  
469 +**Install gateway-rs.**
410 410  
471 +[[image:image-20220905165917-7.png]]
411 411  
412 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
473 +(% class="box infomessage" %)
474 +(((
475 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
476 +)))
413 413  
414 414  
479 +**Modify configuration.**
480 +
481 +
482 +[[image:image-20220905173847-12.png]]
483 +
484 +
485 +(% class="box infomessage" %)
415 415  (((
487 +**region=<Enter regional parameters> \
488 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
490 +)))
491 +
492 +
493 +**Restart the helium_gateway**
494 +
495 +[[image:image-20220905170920-9.png]]
496 +
497 +
498 +(% class="box infomessage" %)
499 +(((
500 +**systemctl restart helium_gateway**
501 +)))
502 +
503 +
504 +**Check the helium_gateway Log：**
505 +
506 +[[image:image-20220905173952-13.png]]
507 +
508 +
509 +(% class="box infomessage" %)
510 +(((
511 +**journalctl -u helium_gateway -f**
512 +)))
513 +
514 +
515 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
516 +
517 +where the helium gateway log is shown:
518 +
519 +[[image:image-20220905174534-14.png]]
520 +
521 +
522 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
523 +
524 +
525 += 7. OTA System Update =
526 +
527 +
528 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
529 +
530 +
531 += 8. Trouble Shooting =
532 +
533 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534 +
535 +
536 +[[image:image-20220920135918-1.png]]
537 +
538 +
539 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540 +
541 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542 +
543 +
544 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545 +
546 +**Click the update URL button to configure the URL with the current eth port address.**
547 +
548 +[[image:image-20220920141936-2.png]]
549 +
550 +
551 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
552 +
553 +
554 +(((
416 416  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
417 417  )))
418 418  
... ... @@ -420,16 +420,17 @@
420 420  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
421 421  
422 422  
562 += 10. Reference =
423 423  
424 -= **11 Reference** =
425 425  
426 -
427 427  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
566 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
428 428  
568 +
429 429  
430 430  )))
431 431  
432 -= **12. Order Info** =
572 += 11. Order Info =
433 433  
434 434  
435 435  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -443,7 +443,6 @@
443 443  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
444 444  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
445 445  
446 -
447 447  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
448 448  
449 449  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -454,10 +454,9 @@
454 454  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
455 455  
456 456  
596 += 12. Manufacturer Info =
457 457  
458 -= **13. Manufacturer Info** =
459 459  
460 -
461 461  **Shenzhen Dragino Technology Development co. LTD**
462 462  
463 463  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -465,23 +465,38 @@
465 465  LongCheng Street, LongGang District ; Shenzhen 518116,China
466 466  
467 467  
606 += 13. FCC Warning =
468 468  
469 -= **14. FCC Warning** =
470 470  
471 -
609 +(((
472 472  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
611 +)))
473 473  
613 +(((
474 474  ~-~- Reorient or relocate the receiving antenna.
615 +)))
475 475  
617 +(((
476 476  ~-~- Increase the separation between the equipment and receiver.
619 +)))
477 477  
621 +(((
478 478  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
623 +)))
479 479  
625 +(((
480 480  ~-~- Consult the dealer or an experienced radio/TV technician for help.
627 +)))
481 481  
482 482  
630 +(((
483 483  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
632 +)))
484 484  
485 485  
635 +(((
486 486  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
637 +
638 +
487 487  )))
640 +)))
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0