Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 69.10 >
edited by Xiaoling
on 2022/07/28 17:50
To version < 187.1 >
edited by Xiaoye
on 2023/04/25 15:56
>
Change comment: Uploaded new attachment "image-20230425155612-7.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -13,11 +13,14 @@
13 13  {{toc/}}
14 14  
15 15  
16 -= **1. Introduction** =
17 17  
18 -== **1.1 What is LPS8v2** ==
19 19  
20 20  
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
21 21  (((
22 22  (((
23 23  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -40,10 +40,9 @@
40 40  )))
41 41  
42 42  
46 +== 1.2 Specifications ==
43 43  
44 -== **1.2 Specifications** ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Hardware System:**
48 48  
49 49  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -50,29 +50,25 @@
50 50  * RAM: 512MB
51 51  * eMMC: 4GB
52 52  
53 -
54 -
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 -
62 -
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 70  
71 +== 1.3 Features ==
71 71  
72 72  
73 -== **1.3 Features** ==
74 -
75 -
76 76  * Open Source Debian system
77 77  * Managed by Web GUI, SSH via WAN or WiFi
78 78  * Remote Management
... ... @@ -90,55 +90,65 @@
90 90  
91 91  
92 92  
91 +== 1.4 Block Diagram ==
93 93  
94 94  
95 -== **1.4 Block Diagram** ==
96 96  
95 +== 1.5 LED Indicators ==
97 97  
98 98  
99 -== **1.5 LED Indicators** ==
100 -
101 -
102 102  LPS8-V2 has totally four LEDs, They are:
103 103  
104 104  
105 105  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
107 -(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
103 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
108 108  
109 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
105 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
110 110  
111 -// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
107 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
112 112  
113 -// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
109 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
114 114  
115 115  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
116 116  
117 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
113 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
118 118  
119 119  
116 +== 1.6 Button Intruction ==
120 120  
121 -= **2. Quick Start** =
122 122  
119 +LPS8-V2 has a black toggle button, which is:
123 123  
124 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
125 125  
126 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
122 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
127 127  
124 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
128 128  
129 129  
130 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
127 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
131 131  
129 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
132 132  
133 -== **2.1.1 connect the network.** ==
134 134  
135 -=== ===
132 += 2. Quick Start =
136 136  
137 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
138 138  
135 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
139 139  
137 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 +
139 +
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
141 +
142 +=== 2.1.1 connect the network ===
143 +
144 +
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
146 +
147 +
140 140  (((
141 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
142 142  )))
143 143  
144 144  (((
... ... @@ -149,31 +149,43 @@
149 149  
150 150  
151 151  
152 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
153 153  
154 154  
155 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
163 +[[image:image-20230107084650-2.png||height="310" width="839"]]
156 156  
157 157  
158 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
166 +(% style="color:blue" %)**Steps to connect via fallback IP:**
159 159  
168 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
160 160  
170 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
161 161  
162 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
163 163  
164 -1. Connect PC's Ethernet port to LPS8-V2's WAN port
173 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
165 165  
166 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
167 167  
168 -[[image:image-20220622101433-4.png]]
176 +As in the below photo:
169 169  
178 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
170 170  
171 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
172 172  
181 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
173 173  
174 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
183 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
175 175  
176 176  
186 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
187 +
188 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
189 +
190 +
191 +
192 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
193 +
194 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
195 +
196 +
177 177  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
178 178  
179 179  
... ... @@ -187,30 +187,122 @@
187 187  [[image:image-20220622102847-7.png]]
188 188  
189 189  
190 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
210 +[[image:image-20220622102901-8.png||height="476" width="938"]]
191 191  
192 192  
213 +=== 2.1.2 Access Configure Web UI ===
193 193  
194 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
195 195  
216 +**Web Interface**
196 196  
197 -=== **2.2.1 Select your area frequency** ===
218 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
198 198  
199 199  
221 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
222 +
223 +You will see the login interface of LPS8-V2 as shown below.
224 +
225 +The account details for Web Login are:
226 +
227 +(% style="color:#4f81bd" %)**User Name: root**
228 +
229 +(% style="color:#4f81bd" %)**Password:   dragino**
230 +
231 +[[image:image-20230106153501-1.png||height="367" width="894"]]
232 +
233 +
234 +== 2.2  Typical Network Setup ==
235 +
236 +=== 2.2.1  Overview ===
237 +
238 +
239 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
240 +
241 +* **WAN Port Internet Mode**
242 +* **WiFi Client Mode**
243 +* **Cellular Mode**
244 +
245 +=== 2.2.2  Use WAN port to access Internet ===
246 +
247 +
248 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
249 +
250 +
251 +[[image:image-20230411100633-2.png||height="501" width="935"]]
252 +
253 +
254 +=== 2.2.3  Access the Internet as a WiFi Client ===
255 +
256 +
257 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
258 +
259 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
260 +
261 +[[image:image-20230411095739-1.png||height="264" width="691"]]
262 +
263 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
264 +
265 +
266 +=== 2.2.4  Use built-in 4G modem for internet access ===
267 +
268 +
269 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
270 +
271 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
272 +
273 +
274 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
275 +
276 +First, install the Micro SIM card as below direction
277 +
278 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
279 +
280 +
281 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
282 +
283 +
284 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
285 +
286 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
287 +
288 +
289 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
290 +
291 +
292 +=== 2.2.5  Check Internet connection ===
293 +
294 +In the **home** page, we can check the Internet connection.
295 +
296 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
297 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
298 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
299 +
300 +[[image:image-20230411101534-3.png||height="544" width="942"]]
301 +
302 +
303 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
304 +
305 +=== 2.3.1 Select your area frequency ===
306 +
307 +
308 +(((
200 200  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
201 201  
202 -[[image:image-20220622103332-9.png]]
311 +
312 +)))
203 203  
314 +[[image:image-20220622103332-9.png||height="485" width="938"]]
204 204  
205 205  
206 -=== **2.2.2 Get the only gateway EUI** ===
317 +=== 2.3.2 Get the only gateway EUI ===
207 207  
208 208  
209 209  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
210 210  
211 -[[image:image-20220622103355-10.png]]
212 212  
323 +[[image:image-20220622103355-10.png||height="698" width="949"]]
213 213  
325 +
214 214  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
215 215  
216 216  
... ... @@ -226,10 +226,9 @@
226 226  [[image:image-20220622103956-12.png]]
227 227  
228 228  
341 +=== 2.3.3 Register the gateway to The Things Network ===
229 229  
230 -== 2.2.3 Register the gateway to The Things Network ==
231 231  
232 -
233 233  **Login to The Things Network**
234 234  
235 235  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -243,20 +243,19 @@
243 243  **Get it online**
244 244  
245 245  
357 += 3. Web Configure Pages =
246 246  
247 -= **3. Web Configure Pages** =
359 +== 3.1 Home ==
248 248  
249 249  
250 -== **3.1 Home** ==
251 -
252 -
253 253  //Shows the system running status~://
254 254  
364 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
255 255  
256 -== **3.2 LoRa Settings** ==
257 257  
367 +== 3.2 LoRa Settings ==
258 258  
259 -=== **3.2.1 LoRa ~-~-> LoRa** ===
369 +=== 3.2.1 LoRa ~-~-> LoRa ===
260 260  
261 261  
262 262  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -263,95 +263,158 @@
263 263  
264 264  //Different LPS8v2 hardware versions can support different frequency ranges~://
265 265  
266 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
376 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
267 267  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
268 268  
269 269  (% class="wikigeneratedid" %)
270 270  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
271 271  
382 +
272 272  (% class="wikigeneratedid" %)
273 273  [[image:image-20220616110739-1.png||height="372" width="682"]]
274 274  
275 275  
276 276  (((
277 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
388 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
278 278  )))
279 279  
280 280  
392 +== 3.3 LoRaWAN Settings ==
281 281  
282 -== **3.3 LoRaWAN Settings** ==
394 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
283 283  
284 284  
285 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
286 -
287 -
288 288  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
289 289  
399 +
290 290  [[image:image-20220616111932-2.png||height="516" width="672"]]
291 291  
292 292  
403 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
293 293  
294 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
295 295  
296 -
297 297  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
298 298  
408 +
299 299  [[image:image-20220616113246-3.png||height="396" width="672"]]
300 300  
301 301  
302 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
412 +(((
413 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
414 +)))
303 303  
304 304  
417 +== 3.4 Network Settings ==
305 305  
306 -== **3.4 Network Settings** ==
419 +=== 3.4.1 Network ~-~-> WiFi ===
307 307  
308 308  
309 -=== **3.4.1 Network ~-~-> WiFi** ===
422 +[[image:image-20220616114756-4.png||height="251" width="669"]]
310 310  
311 311  
312 -[[image:image-20220616114756-4.png||height="251" width="669"]]
425 +=== 3.4.2 Network ~-~-> System Status ===
313 313  
314 314  
428 +[[image:image-20220820134112-2.png||height="539" width="668"]]
315 315  
316 -=== **3.4.2 Network ~-~-> System Status** ===
317 317  
431 +=== 3.4.3 Network ~-~-> Network ===
318 318  
319 -[[image:image-20220616115229-5.png||height="548" width="665"]]
320 320  
434 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
321 321  
436 +[[image:image-20230214093657-2.png||height="333" width="858"]]
322 322  
323 -=== **3.4.3 Network ~-~-> Firewall** ===
324 324  
439 +=== 3.4.4 Network ~-~-> Cellular ===
325 325  
326 -[[image:image-20220616115351-6.png||height="244" width="661"]]
327 327  
442 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
328 328  
444 +(% style="color:red" %)**Note: APN cannot be empty.**
329 329  
330 -== **3.5 System** ==
446 +[[image:image-20230228115126-1.png]]
331 331  
332 332  
333 -=== **3.5.1  System ~-~-> System Overview** ===
449 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
334 334  
451 +[[image:image-20230228115535-2.png||height="478" width="888"]]
335 335  
453 +
454 +== 3.5 System ==
455 +
456 +=== 3.5.1 System ~-~-> System Overview ===
457 +
458 +
336 336  Shows the system info:
337 337  
461 +[[image:image-20220917144512-5.png||height="618" width="853"]]
338 338  
339 339  
340 -=== **3.5.2 System ~-~-> Backup/Restore** ===
464 +=== 3.5.2 System ~-~-> System General ===
341 341  
342 342  
343 -[[image:image-20220616115808-7.png||height="194" width="649"]]
467 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
344 344  
469 +In addition, Users can customize the FallBack IP address.
345 345  
471 +[[image:image-20230214094058-3.png]]
346 346  
347 -= **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
348 348  
474 +=== 3.5.3 System ~-~-> Backup/Restore ===
349 349  
350 -The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
351 351  
352 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
477 +[[image:image-20220917144725-6.png||height="208" width="869"]]
353 353  
354 354  
480 +=== 3.5.4 System ~-~-> Remoteit ===
481 +
482 +
483 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
484 +
485 +
486 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
487 +
488 +[[image:image-20221230092303-2.png]]
489 +
490 +
491 +=== 3.5.5 System ~-~-> Package Management ===
492 +
493 +
494 +In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
495 +
496 +[[image:image-20230214094316-4.png]]
497 +
498 +
499 += 4. Build-in Server =
500 +
501 +
502 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
503 +
504 +
505 +[[image:image-20230214095318-5.png||height="347" width="980"]]
506 +
507 +
508 +(% style="color:red" %)**Note:**
509 +
510 + **Path**: System ~-~-> Built-in Server
511 +
512 +
513 +**Troubleshooting:**
514 +
515 +
516 +**~ 1. URL does not jump properly**
517 +
518 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
519 +
520 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
521 +
522 +
523 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
524 +
525 +
526 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
527 +
355 355  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
356 356  
357 357  
... ... @@ -365,52 +365,282 @@
365 365  [[image:image-20220725171719-1.png||height="570" width="769"]]
366 366  
367 367  
368 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
369 - You can complete the installation manually with the following command.**
541 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
370 370  
371 371  
544 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
545 +
546 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
547 +
548 +[[image:image-20230321092456-1.png]]
549 +
550 +
551 +== 4.2 Application Server ~-~- Node-Red ==
552 +
553 +
554 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
555 +
556 +
557 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
558 +
559 +
560 +[[image:image-20220725172124-3.png||height="610" width="843"]]
561 +
562 +
563 +
564 +=== **Using Node-Red, InfluxDB and Grafana** ===
565 +
566 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
567 +
568 +
569 +the users can refer to this link to install them.
570 +
571 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
572 +
573 +
574 +=== **Upgrade the node.js** ===
575 +
576 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
577 +
578 +
579 +the users can refer to this link to upgrade them.
580 +
581 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
582 +
583 +
584 +== 4.3 How to disable the built-in server ==
585 +
586 +
587 +Use the following commands to start and stop the TTNv3 service:
588 +
372 372  (% class="box infomessage" %)
373 373  (((
374 -(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
591 +**# start**
592 +systemctl start ttnstack
375 375  
376 -(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
594 +**# stop**
595 +systemctl stop ttnstack
596 +
597 +**# enable**
598 +systemctl enable ttnstack
599 +
600 +**#disable**
601 +systemctl disable ttnstack
377 377  )))
378 378  
604 +Use the following commands to start and stop the Node-Red service:
379 379  
606 +(% class="box infomessage" %)
607 +(((
608 +**# start**
609 +systemctl start nodered
380 380  
381 -= **5. Build-in Application Server ~-~- Node-Red** =
611 +**# stop**
612 +systemctl stop nodered
382 382  
614 +**# enable**
615 +systemctl enable nodered
383 383  
384 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
617 +**#disable**
618 +systemctl disable nodered
619 +)))
385 385  
386 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
387 387  
622 +== 4.4 How to use ChirpStack on LPS8-V2 ==
388 388  
389 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
390 390  
625 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
391 391  
392 -[[image:image-20220725172124-3.png||height="610" width="843"]]
627 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
393 393  
629 +[[image:image-20230222094908-1.png||height="133" width="798"]]
394 394  
395 -(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
396 - You can complete the installation manually with the following command.**
397 397  
632 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
398 398  
399 399  
635 +
636 += 6. How users can access LPS8-V2 using serial USB =
637 +
638 +
639 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
640 +
641 +
642 +Port 1 of the UART on the LPS8-V2 is GND
643 +
400 400  (% class="box infomessage" %)
401 401  (((
402 -(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
403 -chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
646 +**TXD  <~-~--> UART RXD (Gray line)**
647 +
648 +**RXD  <~-~--> UART TXD (White line)**
649 +
650 +**GND <~-~--> GND (Black line)**
404 404  )))
405 405  
406 -[[image:image-20220728102000-1.png]]
407 407  
654 +**LPS8v2 UART connection photo**
408 408  
409 409  
410 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
657 +[[image:image-20230421094319-2.png||height="351" width="392"]]
411 411  
659 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
412 412  
661 +
662 +[[image:image-20220804164928-3.png||height="320" width="332"]]
663 +
664 +
665 +[[image:image-20220804164747-2.png||height="622" width="594"]]
666 +
667 +
668 += 7. Use the helium gateway-rs as the Data-only Hotspot =
669 +
670 +
671 +== **Step 1: Configure Frequency Band** ==
672 +
673 +
674 +//Each country has a requirement for frequency region. Choose the right one for your area.//
675 +
676 +[[image:image-20220905164308-1.png]]
677 +
678 +
679 +
680 +== **Step 2: Configure the forward address** ==
681 +
682 +
683 +**Select one of the servers to configure.**
684 +
685 +**For example:**
686 +
687 +[[image:image-20220905164847-2.png]]
688 +
689 +
690 +
691 +== **Step 3: Download and Install the Helium-gateway-rs** ==
692 +
693 +
694 +**Access the gateway CLI via SSH.**
695 +
696 +[[image:image-20220905165222-3.png]]
697 +
698 +
699 +**Download gateway-rs.**
700 +
701 +[[image:image-20220905165715-5.png]]
702 +
703 +(% class="box infomessage" %)
413 413  (((
705 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
706 +)))
707 +
708 +
709 +**Install gateway-rs.**
710 +
711 +[[image:image-20220905165917-7.png]]
712 +
713 +(% class="box infomessage" %)
714 +(((
715 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
716 +)))
717 +
718 +
719 +**Modify configuration.**
720 +
721 +
722 +[[image:image-20220905173847-12.png]]
723 +
724 +
725 +(% class="box infomessage" %)
726 +(((
727 +**region=<Enter regional parameters> \
728 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
729 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
730 +)))
731 +
732 +
733 +**Restart the helium_gateway**
734 +
735 +[[image:image-20220905170920-9.png]]
736 +
737 +
738 +(% class="box infomessage" %)
739 +(((
740 +**systemctl restart helium_gateway**
741 +)))
742 +
743 +
744 +**Check the helium_gateway Log：**
745 +
746 +[[image:image-20220905173952-13.png]]
747 +
748 +
749 +(% class="box infomessage" %)
750 +(((
751 +**journalctl -u helium_gateway -f**
752 +)))
753 +
754 +
755 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
756 +
757 +where the helium gateway log is shown:
758 +
759 +[[image:image-20220905174534-14.png]]
760 +
761 +
762 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
763 +
764 +
765 += 8. OTA System Update =
766 +
767 +
768 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
769 +
770 +
771 += 9. Trouble Shooting =
772 +
773 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
774 +
775 +
776 +[[image:image-20220920135918-1.png]]
777 +
778 +
779 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
780 +
781 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
782 +
783 +
784 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
785 +
786 +**Click the update URL button to configure the URL with the current eth port address.**
787 +
788 +[[image:image-20220920141936-2.png]]
789 +
790 +
791 +== 9.2  Fallback IP does not work, how can users check ==
792 +
793 +
794 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
795 +
796 +
797 +**1.Check whether the configuration is correct**
798 +
799 +Run the CMD command to ipconfig and ping 172.31.255.254.
800 +
801 +If this fails, the user needs to reconfigure.
802 +
803 +[[image:image-20230413170224-3.png||height="433" width="707"]]
804 +
805 +[[image:image-20230413170246-4.png]]
806 +
807 +
808 +**2. Check whether the firewall is disabled**
809 +
810 +If the firewall is not down, this will affect access to the gateway.
811 +
812 +
813 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
814 +
815 +
816 +(((
414 414  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
415 415  )))
416 416  
... ... @@ -418,16 +418,16 @@
418 418  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
419 419  
420 420  
824 += 11. Reference =
421 421  
422 -= **11 Reference** =
423 423  
424 -
425 425  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
828 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
426 426  
427 427  
428 428  )))
429 429  
430 -= **12. Order Info** =
833 += 12. Order Info =
431 431  
432 432  
433 433  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -441,7 +441,6 @@
441 441  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
442 442  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
443 443  
444 -
445 445  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
446 446  
447 447  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -452,10 +452,9 @@
452 452  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
453 453  
454 454  
857 += 13. Manufacturer Info =
455 455  
456 -= **13. Manufacturer Info** =
457 457  
458 -
459 459  **Shenzhen Dragino Technology Development co. LTD**
460 460  
461 461  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -463,23 +463,38 @@
463 463  LongCheng Street, LongGang District ; Shenzhen 518116,China
464 464  
465 465  
867 += 14. FCC Warning =
466 466  
467 -= **14. FCC Warning** =
468 468  
469 -
870 +(((
470 470  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
872 +)))
471 471  
874 +(((
472 472  ~-~- Reorient or relocate the receiving antenna.
876 +)))
473 473  
878 +(((
474 474  ~-~- Increase the separation between the equipment and receiver.
880 +)))
475 475  
882 +(((
476 476  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
884 +)))
477 477  
886 +(((
478 478  ~-~- Consult the dealer or an experienced radio/TV technician for help.
888 +)))
479 479  
480 480  
891 +(((
481 481  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
893 +)))
482 482  
483 483  
896 +(((
484 484  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
898 +
899 +
485 485  )))
901 +)))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0