Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Last modified by Kilight Cao on 2024/12/11 11:22

From version < 51.1 >

edited by Edwin Chen
on 2022/07/14 18:55

To version < 122.1 >

edited by Kilight Cao
on 2022/12/30 09:40

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 36 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--LPS8v2 LoRaWAN Indoor Gateway
++LPS8v2 LoRaWAN Indoor Gateway User Manual

Author

@@ -1,1 +1,1 @@
--XWiki.Edwin
++XWiki.Kilight

Content

@@ -1,8 +1,9 @@
++(% style="text-align:center" %)
  [[image:image-20220620202334-2.png||height="467" width="809"]]
  (((
--**LPS8v2 User Manual**
++
  )))
@@ -11,44 +11,61 @@
  {{toc/}}
--= **1. Introduction** =
--== **1.1 What is LPS8v2** ==
++
++
++= 1. Introduction =
++
++== 1.1 What is LPS8v2 ==
++
++
  (((
++(((
  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++)))
++(((
  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
++)))
++(((
  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
++)))
++(((
  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
++)))
++(((
  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++)))
--== **1.2 Specifications** ==
++== 1.2 Specifications ==
--**Hardware System:**
++(% style="color:#037691" %)**Hardware System:**
++
  * CPU: Quad-core Cortex-A7 1.2Ghz
  * RAM: 512MB
  * eMMC: 4GB
--**Interface:**
++(% style="color:#037691" %)**Interface:**
  * 10M/100M RJ45 Ports x 1
  * Multi-Channel LoRaWAN Wireless
  * WiFi 802.11 b/g/n
--**Operating Condition:**
++(% style="color:#037691" %)**Operating Condition:**
  * Work Temperature: -20 ~~ 65°C
  * Storage Temperature: -20 ~~ 65°C
  * Power Input: 5V, 2A, DC
--== **1.3 Features** ==
++== 1.3 Features ==
++
  * Open Source Debian system
  * Managed by Web GUI, SSH via WAN or WiFi
  * Remote Management
@@ -61,117 +61,126 @@
  ** Semtech UDP Packet Forwarder
  ** LoRaWAN Basic Station
  ** ChirpStack-Gateway-Bridge (MQTT)
--* Built-in //**The Things Network**// local LoRaWAN server
--* Built-in  //**Node-Red**// local Application server
++* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
++* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
--== **1.4 Block Diagram** ==
++== 1.4 Block Diagram ==
--== **1.5 LED Indicators** ==
--LPS8-V2 has totally four LEDs, They are:
++== 1.5 LED Indicators ==
--//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
++LPS8-V2 has totally four LEDs, They are:
--//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
++(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
++(% style="color:blue" %)//**➢ ETH LED**//(%%)//:   This RGB LED will blink GREEN when the ETH port is connecting//
--//**➢ SYS LED**: This RGB LED will show different colors in different states~://
++(% style="color:blue" %)//**➢ SYS LED**//(%%)//:   This RGB LED will show different colors in different states~://
--//                     ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
++//                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
--//                     ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
++//                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
--//                     ✓ SOLID RED: Device doesn’t have an Internet connection.//
++//                     ✓** SOLID RED:** Device doesn't have an Internet connection.//
++(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
--//**➢ ETH LED**: This LED shows the ETH interface connection status.//
++== 1.6 Button Intruction ==
--= **2. Quick Start** =
--The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
++LPS8-V2 has a black toggle button, which is:
--In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
++(% style="color:blue" %)**//➢ //Long press 4-5s                   : **(%%)the gateway will reload the Network and Initialize wifi configuration
--== **2.1 Connects to the network and accesses the gateway Web UI** ==
++                            //                          **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
--== **2.1.1 connect the network.** ==
++(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
--===   ===
++                                                     //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
--=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
--Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
++= 2. Quick Start =
--You can also use this IP to connect.
--[[image:image-20220622100129-1.png||height="332" width="1263"]]
++The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
++In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
--=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
++== 2.1 Connects to the network and accesses the gateway Web UI ==
--[[image:image-20220622100542-2.png||height="369" width="1256"]]
++== 2.1.1 connect the network ==
--The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
++=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
--**Steps to connect via fallback IP:**
++(((
++Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
++)))
--~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
++(((
++You can also use this IP to connect.
++)))
--2. Configure PC's Ethernet port has      IP: 172.31.255.253 and Netmask: 255.255.255.252
++[[image:image-20220622100129-1.png||height="332" width="1263"]]
--[[image:image-20220622101433-4.png]]
--and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
++=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
--[[image:image-20220622102210-5.png||height="569" width="1039"]]
++[[image:image-20220622100542-2.png||height="369" width="1256"]]
--Fill in the WiFi information by checking the box and clicking **Save&Apply**
++Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
  [[image:image-20220622102702-6.png]]
++
  **Wi-Fi configuration successful**
  [[image:image-20220622102847-7.png]]
--[[image:image-20220622102901-8.png||height="513" width="1011"]]
++[[image:image-20220622102901-8.png||height="476" width="938"]]
++== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
--== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
++=== 2.2.1 Select your area frequency ===
--=== **2.2.1 Select your area frequency** ===
--
++(((
  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
--[[image:image-20220622103332-9.png]]
++
++)))
++[[image:image-20220622103332-9.png||height="485" width="938"]]
--=== **2.2.2 Get the only gateway EUI** ===
++=== 2.2.2 Get the only gateway EUI ===
++
++
  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
--[[image:image-20220622103355-10.png]]
++[[image:image-20220622103355-10.png||height="698" width="949"]]
--**Note: Choose the cluster that corresponds to a specific Gateway server address**
++(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
++
++
  **➢ Europe 1:**                 corresponding Gateway server address:     **eu1.cloud.thethings.network**
  **➢ North America 1:**    corresponding Gateway server address:     **nam1.cloud.thethings.network**
@@ -184,13 +184,14 @@
  [[image:image-20220622103956-12.png]]
--
  == 2.2.3 Register the gateway to The Things Network ==
++
  **Login to The Things Network**
  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
++
  **Add the gateway**
  [[image:image-20220622104252-13.png||height="511" width="953"]]
@@ -199,102 +199,338 @@
  **Get it online**
--= **3. Web Configure Pages** =
++= 3. Web Configure Pages =
++== 3.1 Home ==
--== **3.1 Home** ==
  //Shows the system running status~://
--== **3.2 LoRa Settings** ==
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
--=== **3.2.1 LoRa ~-~-> LoRa** ===
++== 3.2 LoRa Settings ==
++=== 3.2.1 LoRa ~-~-> LoRa ===
++
  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
  //Different LPS8v2 hardware versions can support different frequency ranges~://
--* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
++* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
  (% class="wikigeneratedid" %)
--//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
++//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
++
  (% class="wikigeneratedid" %)
  [[image:image-20220616110739-1.png||height="372" width="682"]]
--//**Note ***: See this instruction for how to customize the frequency band~://
++(((
++(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
++)))
--//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
++== 3.3 LoRaWAN Settings ==
--== **3.3 LoRaWAN Settings** ==
++=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
--=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
--
--
  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
++
  [[image:image-20220616111932-2.png||height="516" width="672"]]
--=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
++=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
++
  [[image:image-20220616113246-3.png||height="396" width="672"]]
--Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
++(((
++Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
++)))
--== **3.4 Network Settings** ==
++== 3.4 Network Settings ==
++=== 3.4.1 Network ~-~-> WiFi ===
--=== **3.4.1 Network ~-~-> WiFi** ===
--
  [[image:image-20220616114756-4.png||height="251" width="669"]]
--=== **3.4.2 Network ~-~-> System Status** ===
++=== 3.4.2 Network ~-~-> System Status ===
--[[image:image-20220616115229-5.png||height="548" width="665"]]
++[[image:image-20220820134112-2.png||height="539" width="668"]]
--=== **3.4.3 Network ~-~-> Firewall** ===
++=== 3.4.3 Network ~-~-> Firewall ===
  [[image:image-20220616115351-6.png||height="244" width="661"]]
--== **3.5 System** ==
++== 3.5 System ==
++=== 3.5.1 System ~-~-> System Overview ===
--=== **3.5.1  System ~-~-> System Overview** ===
--
  Shows the system info:
++[[image:image-20220917144512-5.png||height="618" width="853"]]
--=== **3.5.2 System ~-~-> Backup/Restore** ===
++=== 3.5.2 System ~-~-> Backup/Restore ===
--[[image:image-20220616115808-7.png||height="194" width="649"]]
++[[image:image-20220917144725-6.png||height="208" width="869"]]
--3.5.3
++=== 3.5.3 System ~-~-> Remoteit ===
--(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
++In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
++
++
++the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
++
++[[image:image-20221230092303-2.png]]
++
++
++= 4. Build-in Server =
++
++
++The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
++
++
++[[image:image-20220820115644-1.png||height="217" width="778"]]
++
++
++(% style="color:red" %)**Note:**
++
++         **Path**: System ~-~-> Built-in Server
++
++
++**Troubleshooting:**
++
++
++**~         1. URL does not jump properly**
++
++                For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
++
++                For the Node-Red, you can use the local IP address and the port is 1880 to access it.
++
++
++== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
++
++
++You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
++
++Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
++
++
++Login account:
++
++**User ID: **            ** (% style="background-color:yellow" %)admin(%%)**
++
++**Password: **        ** (% style="background-color:yellow" %)dragino(%%)**
++
++
++[[image:image-20220725171719-1.png||height="570" width="769"]]
++
++
++== 4.2 Application Server ~-~- Node-Red ==
++
++
++You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
++
++
++Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
++
++
++[[image:image-20220725172124-3.png||height="610" width="843"]]
++
++
++
++=== **Using Node-Red, InfluxDB and Grafana** ===
++
++The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
++
++
++the users can refer to this link to install them.
++
++[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
++
++
++= 5. How users can access LPS8v2 using serial USB =
++
++
++(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
++
++
++Port 1 of the UART on the LPS8v2 is GND
++
++(% class="box infomessage" %)
  (((
++**TXD  <~-~--> UART RXD (Gray line)**
++
++**RXD  <~-~--> UART TXD (White line)**
++
++**GND <~-~--> GND (Black line)**
++)))
++
++
++**LPS8v2 UART connection photo**
++
++[[image:image-20220804163015-1.png||height="621" width="466"]]
++
++
++
++In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
++
++
++[[image:image-20220804164928-3.png||height="320" width="332"]]
++
++
++[[image:image-20220804164747-2.png||height="622" width="594"]]
++
++
++= 6. Use the helium gateway-rs as the Data-only Hotspot =
++
++
++== **Step 1: Configure Frequency Band** ==
++
++
++//Each country has a requirement for frequency region. Choose the right one for your area.//
++
++[[image:image-20220905164308-1.png]]
++
++
++
++== **Step 2: Configure the forward address** ==
++
++
++**Select one of the servers to configure.**
++
++**For example:**
++
++[[image:image-20220905164847-2.png]]
++
++
++
++== **Step 3: Download and Install the Helium-gateway-rs** ==
++
++
++**Access the gateway CLI via SSH.**
++
++[[image:image-20220905165222-3.png]]
++
++
++**Download gateway-rs.**
++
++[[image:image-20220905165715-5.png]]
++
++(% class="box infomessage" %)
++(((
++**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
++)))
++
++
++**Install gateway-rs.**
++
++[[image:image-20220905165917-7.png]]
++
++(% class="box infomessage" %)
++(((
++**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
++)))
++
++
++**Modify configuration.**
++
++
++[[image:image-20220905173847-12.png]]
++
++
++(% class="box infomessage" %)
++(((
++**region=<Enter regional parameters> \
++&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
++&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
++)))
++
++
++**Restart the helium_gateway**
++
++[[image:image-20220905170920-9.png]]
++
++
++(% class="box infomessage" %)
++(((
++**systemctl restart helium_gateway**
++)))
++
++
++**Check the helium_gateway Log：**
++
++[[image:image-20220905173952-13.png]]
++
++
++(% class="box infomessage" %)
++(((
++**journalctl -u helium_gateway -f**
++)))
++
++
++(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
++
++where the helium gateway log is shown:
++
++[[image:image-20220905174534-14.png]]
++
++
++So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
++
++
++= 7. OTA System Update =
++
++
++LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
++
++
++= 8. Trouble Shooting =
++
++== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
++
++
++[[image:image-20220920135918-1.png]]
++
++
++This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
++
++By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
++
++
++So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
++
++**Click the update URL button to configure the URL with the current eth port address.**
++
++[[image:image-20220920141936-2.png]]
++
++
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
++
++
++(((
  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
  )))
@@ -302,38 +302,42 @@
  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
--= **11 Reference** =
++= 10. Reference =
--* Install Tago Core :  Instruction
++* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
++* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
++
  )))
--= **12. Order Info** =
++= 11. Order Info =
++
  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
--* **AS923**: LoRaWAN AS923 band
--* **AU915**: LoRaWAN AU915 band
--* **EU868**: LoRaWAN EU868 band
--* **KR920**: LoRaWAN KR920 band
--* **US915**: LoRaWAN US915 band
--* **IN865**: LoRaWAN IN865 band
++* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
++* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
++* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
++* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
++* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
++* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
--* ** E**: EMEA, Korea, Thailand, India.
--* ** A**: North America/ Rogers/AT&T/T-Mobile.
--* ** AU**: Latin America, New Zeland, Taiwan
--* ** J**: Japan, DOCOMO/SoftBank/ KDDI
++* (% style="color:red" %)**E**(%%):    EMEA, Korea, Thailand, India.
++* (% style="color:red" %)**A**(%%):   North America/ Rogers/AT&T/T-Mobile.
++* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
++* (% style="color:red" %)**J**(%%):    Japan, DOCOMO/SoftBank/ KDDI
  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
--= **13. Manufacturer Info** =
++= 12. Manufacturer Info =
++
  **Shenzhen Dragino Technology Development co. LTD**
  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
@@ -341,21 +341,38 @@
  LongCheng Street, LongGang District ; Shenzhen 518116,China
--= **14. FCC Warning** =
++= 13. FCC Warning =
++
++(((
  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
++)))
++(((
  ~-~- Reorient or relocate the receiving antenna.
++)))
++(((
  ~-~- Increase the separation between the equipment and receiver.
++)))
++(((
  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
++)))
++(((
  ~-~- Consult the dealer or an experienced radio/TV technician for help.
++)))
++(((
  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
++)))
++(((
  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
++
++
  )))
++)))

image-20220725171719-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.4 KB

Content

image-20220725172100-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+101.0 KB

Content

image-20220725172124-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+89.1 KB

Content

image-20220725194830-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.7 KB

Content

image-20220725195041-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.7 KB

Content

image-20220728102000-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.4 KB

Content

image-20220804163015-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.3 MB

Content

image-20220804164747-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+75.6 KB

Content

image-20220804164928-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.2 KB

Content

image-20220820115644-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.8 KB

Content

image-20220820134112-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+67.4 KB

Content

image-20220905164308-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.5 KB

Content

image-20220905164847-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.9 KB

Content

image-20220905165222-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+18.8 KB

Content

image-20220905165648-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.6 KB

Content

image-20220905165715-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.3 KB

Content

image-20220905165847-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.7 KB

Content

image-20220905165917-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.4 KB

Content

image-20220905170800-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.0 KB

Content

image-20220905170920-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.0 KB

Content

image-20220905173045-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.3 KB

Content

image-20220905173154-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.2 KB

Content

image-20220905173847-12.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.0 KB

Content

image-20220905173952-13.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+46.3 KB

Content

image-20220905174534-14.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+94.4 KB

Content

image-20220917135916-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+140.8 KB

Content

image-20220917141209-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+271.9 KB

Content

image-20220917141336-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+271.9 KB

Content

image-20220917141436-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+140.9 KB

Content

image-20220917144512-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+140.9 KB

Content

image-20220917144725-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.7 KB

Content

image-20220920135918-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

image-20220920141936-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoye

Size

...	...	@@ -1,0 +1,1 @@
	1	+19.4 KB

Content

image-20221230092248-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+47.3 KB

Content

image-20221230092303-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.3 KB

Content

image-20221230092331-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.3 KB

Content

Changes for page LPS8v2 -- LoRaWAN Indoor Gateway User Manual

Summary

Details

Applications

Navigation