Last modified by Kilight Cao on 2024/12/11 11:22
<
From version < 42.1 >
edited by Edwin Chen
on 2022/06/27 09:42
To version < 122.1 >
edited by Kilight Cao
on 2022/12/30 09:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8-V2
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -1,8 +1,9 @@
1 -[[image:image-20220620202334-2.png]]
1 +(% style="text-align:center" %)
2 +[[image:image-20220620202334-2.png||height="467" width="809"]]
2 2  
3 3  
4 4  (((
5 -**LPS8v2 User Manual**
6 +
6 6  
7 7  
8 8  )))
... ... @@ -11,168 +11,193 @@
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 -== **1.1 What is LPS8v2** ==
17 17  
17 +
18 +
19 += 1. Introduction =
20 +
21 +== 1.1 What is LPS8v2 ==
22 +
23 +
18 18  (((
19 -The HP0C is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
25 +(((
26 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +)))
20 20  
29 +(((
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +)))
21 21  
22 -HP0C has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
33 +(((
34 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +)))
23 23  
37 +(((
38 +Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 +)))
24 24  
25 -== **1.2 Specifications** ==
41 +(((
42 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +)))
26 26  
27 -**Hardware System:**
28 28  
29 - Linux Part:
46 +== 1.2 Specifications ==
30 30  
31 -* Dragino H3-Core Linux Module
32 32  
33 -* Quad-core Cortex-A7 1.2Ghz
49 +(% style="color:#037691" %)**Hardware System:**
34 34  
51 +* CPU: Quad-core Cortex-A7 1.2Ghz
35 35  * RAM: 512MB
36 -
37 37  * eMMC: 4GB
38 38  
39 -**Interface:**
55 +(% style="color:#037691" %)**Interface:**
40 40  
41 41  * 10M/100M RJ45 Ports x 1
42 -* LoRaWAN Wireless
58 +* Multi-Channel LoRaWAN Wireless
59 +* WiFi 802.11 b/g/n
43 43  
44 -**Operating Condition:**
61 +(% style="color:#037691" %)**Operating Condition:**
45 45  
46 46  * Work Temperature: -20 ~~ 65°C
47 47  * Storage Temperature: -20 ~~ 65°C
48 -* Power Input: 5V 2A, DC
65 +* Power Input: 5V, 2A, DC
49 49  
50 -== **1.3 Features** ==
67 +== 1.3 Features ==
51 51  
69 +
52 52  * Open Source Debian system
53 53  * Managed by Web GUI, SSH via WAN or WiFi
54 -* Remote access with Reverse-SSH
55 -* Emulates 49x LoRa demodulators
72 +* Remote Management
73 +* Auto-provisioning for batch deployment and management
56 56  * LoRaWAN Gateway
57 57  * 10 programmable parallel demodulation paths
58 58  * Pre-configured to support different LoRaWAN regional settings.
59 59  * Allow customizing LoRaWAN regional parameters.
60 -* Support Local decode ABP end node info and transfer to MQTT server
61 -* Support different level login.
62 -* Built-in //**The Things Network**// local LoRaWAN server
63 -* Built-in  //**Node-Red**// local Application server
64 -* Built-in local //**Chirpstack-gateway-bridge**//
78 +* Different kinds of LoRaWAN Connections such as
79 +** Semtech UDP Packet Forwarder
80 +** LoRaWAN Basic Station
81 +** ChirpStack-Gateway-Bridge (MQTT)
82 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
65 65  
66 -World Widely. Include US and EU
85 +== 1.4 Block Diagram ==
67 67  
68 -== **1.4 Block Diagram** ==
69 69  
70 70  
71 -== **1.5 LED Indicators** ==
89 +== 1.5 LED Indicators ==
72 72  
91 +
73 73  LPS8-V2 has totally four LEDs, They are:
74 74  
75 75  
76 -//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
95 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
77 77  
97 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
78 78  
79 -//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
99 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
80 80  
101 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
81 81  
82 -//**➢ SYS LED**: This RGB LED will show different colors in different states~://
103 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
83 83  
84 -// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
105 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
85 85  
86 -// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
87 87  
88 -// ✓ SOLID RED: Device doesn’t have an Internet connection.//
89 89  
110 +== 1.6 Button Intruction ==
90 90  
91 -//**➢ ETH LED**: This LED shows the ETH interface connection status.//
92 92  
113 +LPS8-V2 has a black toggle button, which is:
93 93  
94 -= **2. Quick Start** =
95 95  
96 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
116 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
97 97  
98 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
118 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
99 99  
100 100  
101 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
121 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
102 102  
123 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
103 103  
104 -== **2.1.1 connect the network.** ==
105 105  
106 -=== ===
126 += 2. Quick Start =
107 107  
108 -=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
109 109  
110 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
129 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
111 111  
112 -You can also use this IP to connect.
131 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
113 113  
114 -[[image:image-20220622100129-1.png||height="332" width="1263"]]
115 115  
134 +== 2.1 Connects to the network and accesses the gateway Web UI ==
116 116  
117 -=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
136 +== 2.1.1 connect the network ==
118 118  
119 119  
120 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
139 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
121 121  
122 122  
123 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
142 +(((
143 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 +)))
124 124  
146 +(((
147 +You can also use this IP to connect.
148 +)))
125 125  
126 -**Steps to connect via fallback IP:**
150 +[[image:image-20220622100129-1.png||height="332" width="1263"]]
127 127  
128 -~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
129 129  
130 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
131 131  
132 -[[image:image-20220622101433-4.png]]
154 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
133 133  
134 134  
135 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
157 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
136 136  
137 137  
138 -[[image:image-20220622102210-5.png||height="569" width="1039"]]
160 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
139 139  
140 140  
141 -Fill in the WiFi information by checking the box and clicking **Save&Apply**
142 -
143 -
144 144  [[image:image-20220622102702-6.png]]
145 145  
146 146  
166 +
147 147  **Wi-Fi configuration successful**
148 148  
149 149  
150 150  [[image:image-20220622102847-7.png]]
151 151  
152 -[[image:image-20220622102901-8.png||height="513" width="1011"]]
153 153  
173 +[[image:image-20220622102901-8.png||height="476" width="938"]]
154 154  
155 155  
176 +== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
156 156  
157 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
178 +=== 2.2.1 Select your area frequency ===
158 158  
159 159  
160 -=== **2.2.1 Select your area frequency** ===
161 -
181 +(((
162 162  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
163 163  
164 -[[image:image-20220622103332-9.png]]
184 +
185 +)))
165 165  
187 +[[image:image-20220622103332-9.png||height="485" width="938"]]
166 166  
167 -=== **2.2.2 Get the only gateway EUI** ===
168 168  
190 +=== 2.2.2 Get the only gateway EUI ===
191 +
192 +
169 169  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
170 170  
171 -[[image:image-20220622103355-10.png]]
172 172  
196 +[[image:image-20220622103355-10.png||height="698" width="949"]]
173 173  
174 -**Note: Choose the cluster that corresponds to a specific Gateway server address**
175 175  
199 +(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
200 +
201 +
176 176  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
177 177  
178 178  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -185,13 +185,14 @@
185 185  [[image:image-20220622103956-12.png]]
186 186  
187 187  
188 -
189 189  == 2.2.3 Register the gateway to The Things Network ==
190 190  
216 +
191 191  **Login to The Things Network**
192 192  
193 193  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
194 194  
221 +
195 195  **Add the gateway**
196 196  
197 197  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -200,102 +200,338 @@
200 200  **Get it online**
201 201  
202 202  
203 -= **3. Web Configure Pages** =
230 += 3. Web Configure Pages =
204 204  
232 +== 3.1 Home ==
205 205  
206 -== **3.1 Home** ==
207 207  
208 208  //Shows the system running status~://
209 209  
210 -== **3.2 LoRa Settings** ==
237 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
211 211  
212 212  
213 -=== **3.2.1 LoRa ~-~-> LoRa** ===
240 +== 3.2 LoRa Settings ==
214 214  
242 +=== 3.2.1 LoRa ~-~-> LoRa ===
215 215  
244 +
216 216  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
217 217  
218 218  //Different LPS8v2 hardware versions can support different frequency ranges~://
219 219  
220 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
249 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
221 221  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
222 222  
223 223  (% class="wikigeneratedid" %)
224 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
253 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
225 225  
255 +
226 226  (% class="wikigeneratedid" %)
227 227  [[image:image-20220616110739-1.png||height="372" width="682"]]
228 228  
229 229  
230 -//**Note ***: See this instruction for how to customize the frequency band~://
260 +(((
261 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
262 +)))
231 231  
232 -//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
233 233  
265 +== 3.3 LoRaWAN Settings ==
234 234  
235 -== **3.3 LoRaWAN Settings** ==
267 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
236 236  
237 237  
238 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
239 -
240 -
241 241  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
242 242  
272 +
243 243  [[image:image-20220616111932-2.png||height="516" width="672"]]
244 244  
245 245  
246 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
276 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
247 247  
248 248  
249 249  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
250 250  
281 +
251 251  [[image:image-20220616113246-3.png||height="396" width="672"]]
252 252  
253 253  
254 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
285 +(((
286 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
287 +)))
255 255  
256 256  
257 -== **3.4 Network Settings** ==
290 +== 3.4 Network Settings ==
258 258  
292 +=== 3.4.1 Network ~-~-> WiFi ===
259 259  
260 -=== **3.4.1 Network ~-~-> WiFi** ===
261 261  
262 -
263 263  [[image:image-20220616114756-4.png||height="251" width="669"]]
264 264  
265 265  
266 -=== **3.4.2 Network ~-~-> System Status** ===
298 +=== 3.4.2 Network ~-~-> System Status ===
267 267  
268 268  
269 -[[image:image-20220616115229-5.png||height="548" width="665"]]
301 +[[image:image-20220820134112-2.png||height="539" width="668"]]
270 270  
271 271  
272 -=== **3.4.3 Network ~-~-> Firewall** ===
304 +=== 3.4.3 Network ~-~-> Firewall ===
273 273  
274 274  
275 275  [[image:image-20220616115351-6.png||height="244" width="661"]]
276 276  
277 277  
278 -== **3.5 System** ==
310 +== 3.5 System ==
279 279  
312 +=== 3.5.1 System ~-~-> System Overview ===
280 280  
281 -=== **3.5.1  System ~-~-> System Overview** ===
282 282  
283 -
284 284  Shows the system info:
285 285  
317 +[[image:image-20220917144512-5.png||height="618" width="853"]]
286 286  
287 -=== **3.5.2 System ~-~-> Backup/Restore** ===
288 288  
320 +=== 3.5.2 System ~-~-> Backup/Restore ===
289 289  
290 -[[image:image-20220616115808-7.png||height="194" width="649"]]
291 291  
323 +[[image:image-20220917144725-6.png||height="208" width="869"]]
292 292  
293 -3.5.3
294 294  
326 +=== 3.5.3 System ~-~-> Remoteit ===
295 295  
296 -(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
297 297  
329 +In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
330 +
331 +
332 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
333 +
334 +[[image:image-20221230092303-2.png]]
335 +
336 +
337 += 4. Build-in Server =
338 +
339 +
340 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
341 +
342 +
343 +[[image:image-20220820115644-1.png||height="217" width="778"]]
344 +
345 +
346 +(% style="color:red" %)**Note:**
347 +
348 + **Path**: System ~-~-> Built-in Server
349 +
350 +
351 +**Troubleshooting:**
352 +
353 +
354 +**~ 1. URL does not jump properly**
355 +
356 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
357 +
358 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
359 +
360 +
361 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
362 +
363 +
364 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
365 +
366 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
367 +
368 +
369 +Login account:
370 +
371 +**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
372 +
373 +**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
374 +
375 +
376 +[[image:image-20220725171719-1.png||height="570" width="769"]]
377 +
378 +
379 +== 4.2 Application Server ~-~- Node-Red ==
380 +
381 +
382 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
383 +
384 +
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
386 +
387 +
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
389 +
390 +
391 +
392 +=== **Using Node-Red, InfluxDB and Grafana** ===
393 +
394 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
395 +
396 +
397 +the users can refer to this link to install them.
398 +
399 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
400 +
401 +
402 += 5. How users can access LPS8v2 using serial USB =
403 +
404 +
405 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
406 +
407 +
408 +Port 1 of the UART on the LPS8v2 is GND
409 +
410 +(% class="box infomessage" %)
298 298  (((
412 +**TXD  <~-~--> UART RXD (Gray line)**
413 +
414 +**RXD  <~-~--> UART TXD (White line)**
415 +
416 +**GND <~-~--> GND (Black line)**
417 +)))
418 +
419 +
420 +**LPS8v2 UART connection photo**
421 +
422 +[[image:image-20220804163015-1.png||height="621" width="466"]]
423 +
424 +
425 +
426 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
427 +
428 +
429 +[[image:image-20220804164928-3.png||height="320" width="332"]]
430 +
431 +
432 +[[image:image-20220804164747-2.png||height="622" width="594"]]
433 +
434 +
435 += 6. Use the helium gateway-rs as the Data-only Hotspot =
436 +
437 +
438 +== **Step 1: Configure Frequency Band** ==
439 +
440 +
441 +//Each country has a requirement for frequency region. Choose the right one for your area.//
442 +
443 +[[image:image-20220905164308-1.png]]
444 +
445 +
446 +
447 +== **Step 2: Configure the forward address** ==
448 +
449 +
450 +**Select one of the servers to configure.**
451 +
452 +**For example:**
453 +
454 +[[image:image-20220905164847-2.png]]
455 +
456 +
457 +
458 +== **Step 3: Download and Install the Helium-gateway-rs** ==
459 +
460 +
461 +**Access the gateway CLI via SSH.**
462 +
463 +[[image:image-20220905165222-3.png]]
464 +
465 +
466 +**Download gateway-rs.**
467 +
468 +[[image:image-20220905165715-5.png]]
469 +
470 +(% class="box infomessage" %)
471 +(((
472 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
473 +)))
474 +
475 +
476 +**Install gateway-rs.**
477 +
478 +[[image:image-20220905165917-7.png]]
479 +
480 +(% class="box infomessage" %)
481 +(((
482 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
483 +)))
484 +
485 +
486 +**Modify configuration.**
487 +
488 +
489 +[[image:image-20220905173847-12.png]]
490 +
491 +
492 +(% class="box infomessage" %)
493 +(((
494 +**region=<Enter regional parameters> \
495 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
496 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
497 +)))
498 +
499 +
500 +**Restart the helium_gateway**
501 +
502 +[[image:image-20220905170920-9.png]]
503 +
504 +
505 +(% class="box infomessage" %)
506 +(((
507 +**systemctl restart helium_gateway**
508 +)))
509 +
510 +
511 +**Check the helium_gateway Log：**
512 +
513 +[[image:image-20220905173952-13.png]]
514 +
515 +
516 +(% class="box infomessage" %)
517 +(((
518 +**journalctl -u helium_gateway -f**
519 +)))
520 +
521 +
522 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
523 +
524 +where the helium gateway log is shown:
525 +
526 +[[image:image-20220905174534-14.png]]
527 +
528 +
529 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
530 +
531 +
532 += 7. OTA System Update =
533 +
534 +
535 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
536 +
537 +
538 += 8. Trouble Shooting =
539 +
540 +== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
541 +
542 +
543 +[[image:image-20220920135918-1.png]]
544 +
545 +
546 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
547 +
548 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
549 +
550 +
551 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
552 +
553 +**Click the update URL button to configure the URL with the current eth port address.**
554 +
555 +[[image:image-20220920141936-2.png]]
556 +
557 +
558 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
559 +
560 +
561 +(((
299 299  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
300 300  )))
301 301  
... ... @@ -302,34 +302,43 @@
302 302  (((
303 303  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
304 304  
568 +
569 += 10. Reference =
570 +
571 +
572 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
573 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
574 +
305 305  
306 306  )))
307 307  
308 -= **10. Order Info** =
578 += 11. Order Info =
309 309  
580 +
310 310  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
311 311  
312 312  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
313 313  
314 -* **AS923**: LoRaWAN AS923 band
315 -* **AU915**: LoRaWAN AU915 band
316 -* **EU868**: LoRaWAN EU868 band
317 -* **KR920**: LoRaWAN KR920 band
318 -* **US915**: LoRaWAN US915 band
319 -* **IN865**: LoRaWAN IN865 band
585 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
586 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
587 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
588 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
589 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
590 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
320 320  
321 321  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
322 322  
323 -* ** E**: EMEA, Korea, Thailand, India.
324 -* ** A**: North America/ Rogers/AT&T/T-Mobile.
325 -* ** AU**: Latin America, New Zeland, Taiwan
326 -* ** J**: Japan, DOCOMO/SoftBank/ KDDI
594 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
595 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
596 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
597 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
327 327  
328 328  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
329 329  
330 330  
331 -= **11. Manufacturer Info** =
602 += 12. Manufacturer Info =
332 332  
604 +
333 333  **Shenzhen Dragino Technology Development co. LTD**
334 334  
335 335  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -337,21 +337,38 @@
337 337  LongCheng Street, LongGang District ; Shenzhen 518116,China
338 338  
339 339  
340 -= **12. FCC Warning** =
612 += 13. FCC Warning =
341 341  
614 +
615 +(((
342 342  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
617 +)))
343 343  
619 +(((
344 344  ~-~- Reorient or relocate the receiving antenna.
621 +)))
345 345  
623 +(((
346 346  ~-~- Increase the separation between the equipment and receiver.
625 +)))
347 347  
627 +(((
348 348  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
629 +)))
349 349  
631 +(((
350 350  ~-~- Consult the dealer or an experienced radio/TV technician for help.
633 +)))
351 351  
352 352  
636 +(((
353 353  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
638 +)))
354 354  
355 355  
641 +(((
356 356  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
643 +
644 +
357 357  )))
646 +)))
image-20220725171719-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +57.4 KB
Content
image-20220725172100-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +101.0 KB
Content
image-20220725172124-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +89.1 KB
Content
image-20220725194830-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.7 KB
Content
image-20220725195041-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.7 KB
Content
image-20220728102000-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +36.4 KB
Content
image-20220804163015-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0