Skip to Content
Last modified by Kilight Cao on 2025/08/14 09:54
From version 355.3
edited by Kilight Cao
on 2025/08/14 09:54
Change comment: There is no comment for this version
To version 243.1
edited by Kilight Cao
on 2023/07/31 15:35
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 -- LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway User Manual
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20220620202334-2.png||data-xwiki-image-style-alignment="center" height="467" width="809"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20220620202334-2.png||height="467" width="809"]]
2 2  
3 3  
4 4  (((
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents:**
11 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -17,7 +17,7 @@
17 17  
18 18  = 1. Introduction =
19 19  
20 -== (% data-sider-select-id="66d5195f-ab1f-47c7-83cb-b027d0903e53" %)1.1 What is LPS8v2(%%) ==
21 +== 1.1 What is LPS8v2 ==
21 21  
22 22  
23 23  (((
... ... @@ -30,7 +30,7 @@
30 30  )))
31 31  
32 32  (((
33 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server ChirpStack-V4 and IoT server Node-red**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 34  )))
35 35  
36 36  (((
... ... @@ -42,10 +42,6 @@
42 42  )))
43 43  
44 44  
45 -
46 -
47 -
48 -
49 49  == 1.2 Specifications ==
50 50  
51 51  
... ... @@ -84,7 +84,7 @@
84 84  ** Semtech UDP Packet Forwarder
85 85  ** LoRaWAN Basic Station
86 86  ** ChirpStack-Gateway-Bridge (MQTT)
87 -* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
88 88  * Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
89 89  
90 90  == 1.4 LED Indicators ==
... ... @@ -99,16 +99,16 @@
99 99  
100 100  (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 101  
102 - ✓  **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 103  
104 - ✓  **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 105  
106 - ✓**  SOLID RED:** Device doesn't have an Internet connection.
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
107 107  
108 108  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 109  
110 110  
111 -== 1.5 Button Instruction ==
108 +== 1.5 Button Intruction ==
112 112  
113 113  
114 114  LPS8-V2 has a black toggle button, which is:
... ... @@ -124,18 +124,13 @@
124 124   **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 125  
126 126  
127 -(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
124 +(% style="color:red" %)**Note**: Restoring factory Settings does not erase data from the LPS8-V2 built-in server
128 128  
129 -See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
126 +See this link for steps on how to clear data from the built-in server:
130 130  
128 +**[[How to clear data from the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtocleardatafromthebuilt-inserver]]**
131 131  
132 -When the gateway restores the factory settings is complete,
133 133  
134 -The WiFi configuration will enable WiFi Access Point by default.
135 -
136 -The other configuration will be restored to the default configuration.
137 -
138 -
139 139  = 2. Quick Start =
140 140  
141 141  
... ... @@ -163,6 +163,7 @@
163 163  [[image:image-20230527085250-2.png||height="495" width="284"]]
164 164  
165 165  
158 +
166 166  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
167 167  
168 168  
... ... @@ -177,6 +177,7 @@
177 177  [[image:image-20220622100129-1.png||height="332" width="1263"]]
178 178  
179 179  
173 +
180 180  ==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
181 181  
182 182  
... ... @@ -200,7 +200,7 @@
200 200  
201 201  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
202 202  
203 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
204 204  
205 205  
206 206  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -208,6 +208,7 @@
208 208  [[image:image-20230111094247-2.png||height="619" width="1250"]]
209 209  
210 210  
205 +
211 211  ==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
212 212  
213 213  [[image:image-20220622100542-2.png||height="369" width="1256"]]
... ... @@ -216,18 +216,19 @@
216 216  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
217 217  
218 218  
219 -[[image:image-20241231151635-3.png||height="481" width="944"]]
214 +[[image:image-20220622102702-6.png]]
220 220  
221 221  
222 222  
223 223  **Wi-Fi configuration successful**
224 224  
225 -[[image:image-20241231151810-4.png||height="487" width="947"]]
226 226  
221 +[[image:image-20220622102847-7.png]]
227 227  
228 -[[image:image-20241231152015-6.png||height="506" width="1001"]]
229 229  
224 +[[image:image-20220622102901-8.png||height="476" width="938"]]
230 230  
226 +
231 231  === 2.1.2 Access Configure Web UI ===
232 232  
233 233  
... ... @@ -246,7 +246,7 @@
246 246  
247 247  (% style="color:blue" %)**Password:   dragino**
248 248  
249 -[[image:image-20240318160845-1.png]]
245 +[[image:image-20230106153501-1.png||height="367" width="894"]]
250 250  
251 251  
252 252  == 2.2  Typical Network Setup ==
... ... @@ -278,7 +278,7 @@
278 278  
279 279  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
280 280  
281 -[[image:image-20241231151512-2.png]]
277 +[[image:image-20230411095739-1.png||height="264" width="691"]]
282 282  
283 283  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
284 284  
... ... @@ -298,7 +298,7 @@
298 298  Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
299 299  
300 300  
301 -[[image:image-20241231153425-1.jpeg||height="262" width="884"]]
297 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
302 302  
303 303  
304 304  The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
... ... @@ -309,12 +309,6 @@
309 309  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 310  
311 311  
312 -(% style="color:red" %)**Note: In most cases, the user simply types in the APN and checks the enable checkbox, without typing Pincode, Username, or Password settings.**
313 -
314 -
315 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
316 -
317 -
318 318  === 2.2.5  Check Internet connection ===
319 319  
320 320  
... ... @@ -408,7 +408,7 @@
408 408  
409 409  
410 410  (% class="wikigeneratedid" %)
411 -[[image:image-20220616110739-1.png||height="457" width="836"]]
401 +[[image:image-20220616110739-1.png||height="372" width="682"]]
412 412  
413 413  
414 414  (((
... ... @@ -438,40 +438,25 @@
438 438  
439 439  (((
440 440  Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
441 -
442 -
443 -== (% style="color:inherit; font-family:inherit; font-size:26px" %)3.4  Forwarder(%%) ==
444 444  )))
445 445  
446 -=== 3.4.1 Forwarder ~-~-> MQTT Forwarder ===
447 447  
434 +== 3.4 Network Settings ==
448 448  
449 -In the latest version, MQTT Forwarder functionality has been added to the LPS8V2 gateway by default
436 +=== 3.4.1 Network ~-~-> WiFi ===
450 450  
451 -Users can configure the MQTT Forwarder on the **Forwarder~-~->MQTT** interface, and when the configuration is successful, it will forward the sensor data of the lorawan server chirpstack built in LPS8v2
452 -
453 -For a detailed example of this feature, see this link:**[[MQTT Forward Instruction - DRAGINO>>http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/#H3.3A0UseLoRaWANProtocolforcommunication--ForLPS8V2]]**
454 -
455 -(% class="wikigeneratedid" %)
456 -[[image:image-20240902092034-1.png]]
457 -
458 -
459 -== 3.5 Network Settings ==
460 -
461 -=== 3.5.1 Network ~-~-> WiFi ===
462 -
463 463  Users can configure the wifi WAN and enable Wifi Access Point on this interface
464 464  
465 -[[image:image-20241231151434-1.png||height="608" width="1195"]]
440 +[[image:image-20230619095946-1.png||height="332" width="827"]]
466 466  
467 467  
468 -=== 3.5.2 Network ~-~-> System Status ===
443 +=== 3.4.2 Network ~-~-> System Status ===
469 469  
470 470  
471 471  [[image:image-20220820134112-2.png||height="539" width="668"]]
472 472  
473 473  
474 -=== 3.5.3 Network ~-~-> Network ===
449 +=== 3.4.3 Network ~-~-> Network ===
475 475  
476 476  
477 477  In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
... ... @@ -479,7 +479,7 @@
479 479  [[image:image-20230214093657-2.png||height="333" width="858"]]
480 480  
481 481  
482 -=== 3.5.4 Network ~-~-> Cellular ===
457 +=== 3.4.4 Network ~-~-> Cellular ===
483 483  
484 484  
485 485  In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
... ... @@ -496,25 +496,20 @@
496 496  
497 497  Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
498 498  
499 -**[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]**
474 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
500 500  
501 -(% class="wikigeneratedid" id="H5.MQTTForwarder" %)
502 -(% id="cke_bm_4823S" style="display:none" %)
503 503  
504 -When cellular fails to connect or has problems, users can refer to this link to (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)Trouble Shooting(%%):**[[How to Trouble Shooting if Cellular connection fails>>https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.2ForLPS8v22FMS48-LR]]**
477 +== 3.5 System ==
505 505  
479 +=== 3.5.1 System ~-~-> System Overview ===
506 506  
507 -== 3.6 System ==
508 508  
509 -=== 3.6.1 System ~-~-> System Overview ===
510 -
511 -
512 512  Shows the system info:
513 513  
514 -[[image:image-20231031162854-1.png]]
484 +[[image:image-20220917144512-5.png||height="618" width="853"]]
515 515  
516 516  
517 -=== 3.6.2 System ~-~-> System General ===
487 +=== 3.5.2 System ~-~-> System General ===
518 518  
519 519  
520 520  In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
... ... @@ -524,29 +524,15 @@
524 524  [[image:image-20230214094058-3.png]]
525 525  
526 526  
527 -=== 3.6.3 System ~-~-> Backup/Restore ===
497 +=== 3.5.3 System ~-~-> Backup/Restore ===
528 528  
529 529  
530 -[[image:image-20231031162927-2.png]]
500 +[[image:image-20220917144725-6.png||height="208" width="869"]]
531 531  
532 -=== 3.6.4 System ~-~-> Reboot / Reset ===
533 533  
534 -In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
503 +=== 3.5.4 System ~-~-> Remoteit ===
535 535  
536 -ETH LED will SOLID BULE Until the restore is finished.
537 537  
538 -When the gateway restores the factory settings is complete,
539 -
540 -The WiFi configuration will enable WiFi Access Point by default.
541 -
542 -The other configuration will be restored to the default configuration.
543 -
544 -[[image:image-20240203172853-1.png||height="365" width="901"]]
545 -
546 -
547 -=== 3.6.5 System ~-~-> Remoteit ===
548 -
549 -
550 550  In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
551 551  
552 552  
... ... @@ -555,7 +555,7 @@
555 555  [[image:image-20221230092303-2.png]]
556 556  
557 557  
558 -=== 3.6.6 System ~-~-> Package Management ===
514 +=== 3.5.5 System ~-~-> Package Management ===
559 559  
560 560  
561 561  In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
... ... @@ -563,116 +563,103 @@
563 563  [[image:image-20230214094316-4.png]]
564 564  
565 565  
566 -== 3.7 Logread ==
522 += 4. Build-in Server =
567 567  
568 -=== 3.7.1 LoRa Log ===
569 569  
525 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
570 570  
571 -In the **Lograde ~-~-> LoRa Log page**, The users can view information about the gateway lora channel and the status of the IoT connection
527 +[[image:image-20230616175617-8.png||height="390" width="894"]]
572 572  
573 -[[image:image-20240416112509-1.png]]
529 +[[image:image-20230616175558-7.png||height="362" width="894"]]
574 574  
575 575  
576 -=== 3.7.2 Gateway Traffic ===
577 577  
578 -In the **Lograde ~-~-> Gateway Traffic page**, The users can view sensor packages about Recent LoRa uplink/downlink/Join requests
533 +(% style="color:red" %)**Note:**
579 579  
580 -[[image:image-20240416112618-2.png||height="705" width="1122"]]
535 + **Path**: Server ~-~-> Network Server
581 581  
537 + Server ~-~-> Application Server
582 582  
583 -=== 3.7.3 System Log ===
584 584  
585 -In the **Lograde ~-~-> System Log page**, The users can view information about the gateway system
540 +**Troubleshooting:**
586 586  
587 -[[image:image-20240416112649-3.png||height="820" width="1122"]]
588 588  
543 +**~ 1. URL does not jump properly**
589 589  
590 -=== 3.7.4 Record Log ===
545 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
591 591  
592 -In the **Lograde ~-~-> Recod Log page**, The users can record the gateway curren running log.
547 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
593 593  
594 -[[image:image-20240416112712-4.png||height="319" width="1128"]]
595 595  
550 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
596 596  
597 597  
598 -= 4. Build-in Server =
553 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
599 599  
600 -After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
555 +Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
601 601  
602 -(% style="color:red" %)**Note: LPS8V2 has built-in chirpstack based on Docker, so customers do not need to install it manually again**
603 603  
558 +Login account:
604 604  
605 -== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
560 +**Username : ** (% style="background-color:yellow" %)**admin**
606 606  
607 -[[image:image-20231106180816-4.png||height="416" width="896"]]
562 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
608 608  
609 -[[image:image-20231201165904-1.png||height="466" width="899"]]
564 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
610 610  
611 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
612 612  
613 -For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
614 614  
568 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
615 615  
616 616  
617 -== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
571 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
618 618  
573 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
619 619  
620 -[[image:image-20230616175558-7.png||height="362" width="894"]]
575 +[[image:image-20230321092456-1.png]]
621 621  
622 -[[image:image-20231201170355-2.png||height="536" width="899"]]
623 623  
624 -(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
625 625  
579 +== 4.2 Application Server ~-~- Node-Red ==
626 626  
627 627  
628 -== **3). Troubleshooting:** ==
582 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
629 629  
630 630  
631 -* (((
632 -=== ** If the URL does not jump properly.** ===
633 -)))
585 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
634 634  
635 - For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
636 636  
637 - For the Node-Red, you can use the local IP address and the port is **1880** to access it.
588 +[[image:image-20220725172124-3.png||height="610" width="843"]]
638 638  
639 639  
640 -* (((
641 -=== ** How to install InfluxDB, Garfana.** ===
642 -)))
643 643  
644 - The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
592 +=== **Using Node-Red, InfluxDB and Grafana** ===
645 645  
594 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
646 646  
647 -* (((
648 -=== ** How to upgrade the gateway node.js to the latest version.** ===
649 -)))
650 650  
651 - The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
597 +the users can refer to this link to install them.
652 652  
599 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
653 653  
654 -* (((
655 -=== ** How to batch register device on the built-in Chirpstack network server** ===
656 -)))
657 657  
658 - The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
602 +=== **Upgrade the node.js** ===
659 659  
604 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
660 660  
661 -* (((
662 -=== ** Why my gateway is not Chirpstack?** ===
663 -)))
664 664  
665 - After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
607 +the users can refer to this link to upgrade them.
666 666  
609 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
667 667  
668 -* (((
669 -=== ** How to disable the built-in server** ===
670 -)))
671 671  
612 +== 4.3 How to disable the built-in server ==
613 +
614 +
615 +Use the following commands to start and stop the TTNv3 service:
616 +
672 672  (% class="box infomessage" %)
673 673  (((
674 -Use the following commands to start and stop the TTNv3 service:**     **
675 -
676 676  **# start**
677 677  systemctl start ttnstack
678 678  
... ... @@ -686,10 +686,10 @@
686 686  systemctl disable ttnstack
687 687  )))
688 688  
689 -(% class="box infomessage" %)
690 -(((
691 691  Use the following commands to start and stop the Node-Red service:
692 692  
634 +(% class="box infomessage" %)
635 +(((
693 693  **# start**
694 694  systemctl start nodered
695 695  
... ... @@ -703,42 +703,35 @@
703 703  systemctl disable nodered
704 704  )))
705 705  
706 -* (((
707 -=== ** How to choose the Chirpstack server frequency SubBand** ===
708 -)))
709 709  
710 -**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
650 +== 4.4 How to use ChirpStack on LPS8-V2 ==
711 711  
712 - Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
713 713  
714 -[[image:image-20230602140406-3.png||height="480" width="918"]]
653 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
715 715  
655 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
716 716  
717 -When the configuration is complete, click** "Save&Apply"**.
718 718  
658 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
719 719  
720 -(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
721 721  
722 -[[image:image-20230602143122-4.png||height="511" width="983"]]
661 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
723 723  
663 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
724 724  
665 +[[image:image-20230602140406-3.png||height="480" width="918"]]
725 725  
726 -= 5. Watch Dog =
727 727  
668 +When the configuration is complete, click** "Save&Apply"**.
728 728  
729 -The watchdog will guard the LPS8V2 to avoid the need to perform a reboot manually after down occurs
730 730  
671 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
731 731  
732 -LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
673 +[[image:image-20230602143122-4.png||height="511" width="983"]]
733 733  
734 -The uses can be via the below method to enable Watch Dog:
735 735  
736 -(% class="box infomessage" %)
737 -(((
738 -wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
739 -)))
676 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
740 740  
741 -[[image:image-20231124113209-1.png||height="470" width="1157"]]
742 742  
743 743  
744 744  = 6. How users can access LPS8-V2 using serial USB =
... ... @@ -794,6 +794,7 @@
794 794  
795 795  1). Using the Linux command to upgrade the system
796 796  
733 +
797 797  (% class="box infomessage" %)
798 798  (((
799 799  **apt update && apt install *dragino***
... ... @@ -802,352 +802,65 @@
802 802  
803 803  2). Upgrade the system via the Web page button of "Manual Update"
804 804  
805 -(% style="color:red" %)**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
806 806  
743 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
744 +
807 807  [[image:image-20230607093849-1.png]]
808 808  
809 809  
810 -= (% data-sider-select-id="f31494a0-5f58-4b5c-820e-9cb1be76d96f" %)8 How do I view gateway logs(%%) =
811 811  
812 -=== (% data-sider-select-id="2c782a3d-7138-45c4-bbdf-09c0e27ef896" %)8.1 LoRaWAN Log:(%%) ===
749 += 8. FAQ =
813 813  
751 +== 8.1 How to change Hostname ==
814 814  
815 -==== Semtech UDP Log : ====
816 816  
817 -When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
754 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
818 818  
819 -[[image:image-20231017112115-2.png||height="611" width="821"]]
820 -
821 -
822 -==== Station Log: ====
823 -
824 -When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
825 -
826 -[[image:image-20231017111606-1.png||height="622" width="821"]]
827 -
828 -
829 -=== (% data-sider-select-id="de76f982-b2e5-4327-aab4-8890814f5f53" %)8.2  4G Log(%%) ===
830 -
831 -
832 -User needs to access the Linux console of the gateway and enter the following command:
833 -
834 834  (% class="box infomessage" %)
835 835  (((
836 -cat /var/log/qmilog.txt
758 +hostnamectl set-hostname dragino-123456
837 837  )))
838 838  
839 -[[image:image-20231017114417-3.png||height="543" width="679"]]
761 +[[image:image-20230517102429-1.png]]
840 840  
763 +After the configuration is complete, run "reboot" to restart the gateway.
841 841  
842 -LPS8v2 use **quectel-CM** linux drive for dial up. The manual of this driver can be found here: [[**quectel-CM driver user manual**>>https://www.dropbox.com/scl/fi/73n2jl2c5r8h4i187to4n/Quectel_WCDMA_LTE_Linux_USB_Driver_User_Guide_V1.9-20190212.pdf?rlkey=j8834bw38d4neieisg54zngu9&st=kjsd4zx4&dl=0]].
843 843  
844 -Below are some commands as reference:
766 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
845 845  
846 ->Usage:  /usr/bin/quectel-CM [options]
847 -> -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
848 -> -p pincode Verify sim card pin if sim card is locked
849 -> -p [quectel-][qmi|mbim]-proxy  Request to use proxy
850 -> -f logfilename Save log message of this program to file
851 -> -u usbmonlog filename  Save usbmon log to file
852 -> -i interface Specify which network interface to setup data call when multi-modems exits
853 -> -4 Setup IPv4 data call (default)
854 -> -6 Setup IPv6 data call
855 -> -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
856 -> -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
857 -> -b Enable network interface bridge function (default 0)
858 -> -v Verbose log mode, for debug purpose.[Examples]
859 ->Example 1: /usr/bin/quectel-CM
860 ->Example 2: /usr/bin/quectel-CM -s 3gnet
861 ->Example 3: /usr/bin/quectel-CM -s 3gnet -v
862 862  
769 +Migrate guide:
863 863  
771 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
864 864  
865 -=== (% data-sider-select-id="ec43d85c-19ec-48b0-a4fc-0ecd76f17fc4" %)8.3 Dmesg Log(%%) ===
773 +**2. On the Server ~-~-> Network Server interface, click "Management"**
866 866  
775 +[[image:image-20230616162454-1.png]]
867 867  
868 -Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
869 869  
870 -[[image:image-20231017115330-5.png||height="565" width="740"]]
778 +**3. Click "Migrate-Chirpstack"**
871 871  
780 +[[image:image-20230616162742-2.png]]
872 872  
873 -=== (% data-sider-select-id="3a977a3e-9417-40fa-bdfb-2544a88744a9" %)8.4 Record Log(%%) ===
874 874  
783 +**4. Strat Install **
875 875  
876 -Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
785 +Click start Install and wait until the migration succeeds
877 877  
878 -[[image:image-20231017115124-4.png||height="215" width="880"]]
787 +[[image:image-20230616162934-3.png]]
879 879  
880 880  
881 -=== (% data-sider-select-id="b988f832-4b37-4a61-b951-ff2138ad9cba" %)8.5 View gateway logs via Linux Command(%%) ===
790 +**5.Migration complete check result**
882 882  
792 +[[image:image-20230616174526-4.png||height="706" width="983"]]
883 883  
884 -**Semtech UDP Log :**
885 885  
886 -(% class="box infomessage" %)
887 -(((
888 -**journalctl -u draginofwd -f**
889 -)))
795 +[[image:image-20230616180004-9.png]]
890 890  
891 -[[image:image-20231207144627-1.png||height="371" width="1017"]]
892 892  
798 +== 8.3 How to reduce the 4g data consumed ==
893 893  
894 -**Station Log:**
895 895  
896 -(% class="box infomessage" %)
897 -(((
898 -**tail -f /var/log/station.log **
899 -)))
900 -
901 -[[image:image-20231207144758-2.png||height="132" width="1022"]]
902 -
903 -
904 -**Dmesg Log:**
905 -
906 -(% class="box infomessage" %)
907 -(((
908 -**dmesg**
909 -)))
910 -
911 -[[image:image-20231207145210-3.png||height="310" width="1021"]]
912 -
913 -
914 -**SysLog :**
915 -
916 -(% class="box infomessage" %)
917 -(((
918 -**tail -f /var/log/syslog **
919 -)))
920 -
921 -[[image:1754364208742-890.png||height="295" width="1023"]]
922 -
923 -(% data-sider-select-id="65e92cfb-62df-4513-8469-b74edd72dea5" %)
924 -= (% data-sider-select-id="ce97a758-4348-4c0c-86eb-412b6b8d3996" %)9. More Services(%%) =
925 -
926 -== (% data-sider-select-id="6b164b64-51ae-4144-8ffd-5cd725b3bb5f" %)9.1 NTP Service/Time Synchronization(%%) ==
927 -
928 -The gateway time sync service is provided by chrony service
929 -
930 -
931 -=== 1). Modify the NTP server address: ===
932 -
933 -(% class="box infomessage" %)
934 -(((
935 -Configuration file path:  /etc/chrony/chrony.conf
936 -)))
937 -
938 -
939 -=== 2). Start/Stop/Enable/Disable NTP service: ===
940 -
941 -(% class="box infomessage" %)
942 -(((
943 -systemctl start chrony
944 -\\systemctl stop chrony
945 -\\systemctl disable chrony
946 -\\systemctl enable chrony
947 -)))
948 -
949 -
950 -(% data-sider-select-id="61881d06-3f91-437c-8b64-7032dea3c970" %)
951 -= (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10. More features(%%) =
952 -
953 -(% data-sider-select-id="692f00f1-a7cc-4954-ac62-0a5dddb0a0c6" %)
954 -== (% data-sider-select-id="ec6a5e23-ba91-46d9-8042-1e4c6a7b3b36" %)10.1 Chirpstack MQTT Forwarder(%%) ==
955 -
956 -
957 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
958 -
959 -
960 -(% data-sider-select-id="d2b54844-aad8-4198-9f17-841cd68db9b3" %)
961 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="0870eb11-ff25-47fc-9e3c-80a68bbf3933" %).1.1 Configure Packet Forwarder(%%) ===
962 -
963 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
964 -
965 -(% data-sider-select-id="48576a4e-42ef-4ac9-83b4-122fc10c6629" %)
966 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="c2683c51-0bf8-4ac5-87be-c50edacc8f4b" %)**http:~/~/GATEWAY-IP-ADDRESS**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are root / dragino.
967 -
968 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
969 -* Configure the following settings:
970 -** **Service Provider:** //Custom / Private LoRaWAN//
971 -** **Server Address:** localhost
972 -** **Uplink Port:** 1700
973 -** **Downlink Port:** 1700
974 -* Click **Save & Apply**
975 -
976 -[[image:image-20240518145929-2.png||height="652" width="727"]]
977 -
978 -
979 -(% data-sider-select-id="716df9b1-d844-4797-bce9-9b1adf49b072" %)
980 -=== (% data-sider-select-id="fb64fcfa-81b6-41b5-ae81-81d94960d7dd" %)10(% data-sider-select-id="ffba644f-a9d5-4e93-a9da-9f9e49d596d9" %).1.2 Install ChirpStack MQTT Forwarder(%%) ===
981 -
982 -
983 -(% data-sider-select-id="2a752131-c23e-4da4-b142-5880dd688c39" %)
984 -(% data-sider-select-id="833bbe42-c175-4e13-ab7a-c8abc30378d0" %)**SSH login**
985 -
986 -First you must login into the gateway using SSH:
987 -
988 -(% class="box infomessage" data-sider-select-id="608a94b0-8dee-453d-9433-5fe12c6559e5" %)
989 -(((
990 -ssh root@GATEWAY-IP-ADDRESS
991 -)))
992 -
993 -(% data-sider-select-id="63adc977-8227-4585-ab1d-eea44a01c34c" %)
994 -The default password is: (% data-sider-select-id="5fad2844-9bd3-49e2-979b-ffd184b923cf" %)**dragino**(%%).
995 -
996 -
997 -(% data-sider-select-id="216fb9b4-6cee-4cb6-8b71-0a9cda3bd96a" %)
998 -(% data-sider-select-id="914750d6-03c5-48fe-ad27-49e99d95d877" %)**Download **(% data-sider-select-id="94e274ee-d341-40dc-8ca8-dc3c3b4c4981" %)**package**
999 -
1000 -(% data-sider-select-id="f95485e3-b535-4ea2-b0aa-0c46b5254782" %)
1001 -Use the following commands to download the latest version of the ChirpStack MQTT Forwarder package:
1002 -
1003 -(% class="box infomessage" data-sider-select-id="ab1338ab-a215-4185-8552-1efd6e067858" %)
1004 -(((
1005 -cd /tmp
1006 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1007 -)))
1008 -
1009 -
1010 -(% data-sider-select-id="e59f1bad-427f-47b8-bc97-a818490576c4" %)
1011 -(% data-sider-select-id="1b512eaf-c564-4835-afac-548b9a6a7045" %)**Install **
1012 -
1013 -Use the dpkg package-manager to install the downloaded package. Example:
1014 -
1015 -(% class="box infomessage" data-sider-select-id="7e7ff0cf-c367-4ff0-9387-f4eb82f3c89e" %)
1016 -(((
1017 -dpkg -i chirpstack-mqtt-forwarder_4.3.0_linux_armhf.deb
1018 -)))
1019 -
1020 -[[image:image-20240518152148-4.png]]
1021 -
1022 -
1023 -(% data-sider-select-id="69e4a485-6ea8-46e7-97a3-8666bc9423a7" %)
1024 -**Configuration**
1025 -
1026 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1027 -
1028 -(% data-sider-select-id="e98443ef-dcc1-4be1-ad3e-ec31b0a580b4" %)
1029 -This file is located at: (% data-sider-select-id="60301edc-5082-44e9-a91a-688327092116" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1030 -
1031 -
1032 -**ChirpStack MQTT Forwarder Setting:**
1033 -
1034 -(% class="box" data-sider-select-id="1d70062d-64ab-410b-bd8e-476c73d5dd70" %)
1035 -(((
1036 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1037 -
1038 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1039 -)))
1040 -
1041 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1042 -
1043 -
1044 -Use commands to modify configuration files:
1045 -
1046 -(% class="box infomessage" data-sider-select-id="d552b27f-cfd2-4f5a-9b7f-b627f5dd3387" %)
1047 -(((
1048 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1049 -)))
1050 -
1051 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1052 -
1053 -
1054 -**(Re)start and stop commands**
1055 -
1056 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1057 -
1058 -(% class="box infomessage" data-sider-select-id="61c3c343-2cb9-4b07-8741-5d5da2d88ec3" %)
1059 -(((
1060 -# start
1061 -
1062 -(% data-sider-select-id="5482a31e-3aa0-403c-aec5-117839958068" %)
1063 -systemctl start chirpstack-mqtt-forwarder
1064 -
1065 -# stop
1066 -
1067 -systemctl stop chirpstack-mqtt-forwarder
1068 -
1069 -# restart
1070 -
1071 -systemctl restart chirpstack-mqtt-forwarder
1072 -)))
1073 -
1074 -(% data-sider-select-id="1cea423f-9653-47e6-8022-aadcb684f191" %)
1075 -(% data-sider-select-id="f385e712-68bc-48fd-8b94-67a0c7e7cb70" %)**Note: If the LPS8v2 built-in server is running, it will cause a port conflict**
1076 -
1077 -
1078 -**Check result**
1079 -
1080 -(% data-sider-select-id="43d1d40a-2620-4547-b00d-f78dd5427215" %)
1081 -Use "** journalctl -u chirpstack-mqtt-forwarder -f(% data-sider-select-id="ab74df8a-b859-4afa-9c26-d0807e860e6c" %) (%%)**" to check the operation of ChirpStack MQTT Forwarder.
1082 -
1083 -[[image:image-20240518154223-5.png]]
1084 -
1085 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1086 -
1087 -
1088 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.2 As a Data-only hotspot connect the helium blockchain(%%) ==
1089 -
1090 -
1091 -(% class="box infomessage" %)
1092 -(((
1093 -(% data-sider-select-id="3359233b-fcc9-4415-9bee-4151919fbb2e" %)
1094 -apt update && apt install helium-gateway
1095 -)))
1096 -
1097 -
1098 -== (% data-sider-select-id="de90793f-d833-4885-8b59-d0880f7256e6" %)10.3 (%%)How does LPS8v2 filter unwanted lorawan packets ==
1099 -
1100 -
1101 -This feature is to filter the unwanted LoRaWAN packets. Purpose is to save the upstream traffic especially for a 4G cellular connection.
1102 -
1103 -Please refer to the link below for specific usage：**[[Filter unwanted LoRaWAN packets>>https://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]**
1104 -
1105 -
1106 -= (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11. FAQ(%%) =
1107 -
1108 -== (% data-sider-select-id="9fbcac50-3c87-43d9-8611-8d311fcb7820" %)11.1 How to change Hostname(%%) ==
1109 -
1110 -
1111 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
1112 -
1113 -(% class="box infomessage" %)
1114 -(((
1115 -hostnamectl set-hostname dragino-123456
1116 -)))
1117 -
1118 -[[image:image-20230517102429-1.png]]
1119 -
1120 -After the configuration is complete, run "reboot" to restart the gateway.
1121 -
1122 -
1123 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="62cdc3f4-fb6f-4e4d-92a5-60449c8b462f" %).2 Build-in The Things Network migrate to ChirpStack(%%) ==
1124 -
1125 -
1126 -Migrate guide:
1127 -
1128 -To stabilize the completion of the migration, The users can migrate in one of the following ways
1129 -
1130 -**Method 1. Using the Linux shell, **
1131 -
1132 -**Method 2. Flash a new image with the Chirpstack**
1133 -
1134 -
1135 -=== Method 1: Using the Linux shell ===
1136 -
1137 -(% class="box infomessage" %)
1138 -(((
1139 -wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
1140 -)))
1141 -
1142 -
1143 -=== Method 2: Flash a new image ===
1144 -
1145 -Image flash steps:** [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1146 -
1147 -
1148 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="b2a44672-8abb-425d-a823-f2faa334cdb7" %).3 How to reduce the 4g data consumed(%%) ==
1149 -
1150 -
1151 1151  1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
1152 1152  
1153 1153  [[image:image-20230719100239-1.png||height="724" width="994"]]
... ... @@ -1163,47 +1163,20 @@
1163 1163  [[image:image-20230719100419-3.png||height="458" width="995"]]
1164 1164  
1165 1165  
1166 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).4 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3.(%%) ==
816 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
1167 1167  
1168 1168  
1169 -By default, the LPS8v2's built-in server is ChirpStack v4,
1170 -
1171 -If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
1172 -
1173 -**[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]**
1174 -
1175 -
1176 -Image flash steps: **[[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]**
1177 -
1178 -
1179 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="457c03ce-1aaa-44c6-bf8e-0298ca8045e4" %).5 (%%)How to check my USB port dev/tty after i plug in USB device. ==
1180 -
1181 -
1182 -When an external USB device is connected to LPS8v2, the user can access the Linux console of the LPS8v2 gateway and run the following command to check the USB port dev/tty:
1183 -
1184 1184  (% class="box infomessage" %)
1185 1185  (((
1186 -dmesg
821 +apt update && apt install helium-gateway
1187 1187  )))
1188 1188  
1189 -[[image:image-20240803095144-1.png]]
1190 1190  
825 += 9. Trouble Shooting =
1191 1191  
827 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
1192 1192  
1193 -== (% data-sider-select-id="20d4ea6b-7328-46c6-bc97-f0050cfe382e" %)11(% data-sider-select-id="82550df9-987d-4f58-9877-86a0c5e621a4" %).6 DIN Mount Reference:(%%) ==
1194 1194  
1195 -
1196 -[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
1197 -
1198 -[[image:image-20240318095617-2.png]]
1199 -
1200 -
1201 -
1202 -
1203 -= (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12. Trouble Shooting(%%) =
1204 -
1205 -== (% data-sider-select-id="cb7a0b2f-4144-4f58-86d0-64a15944840e" %)12.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'.(%%) ==
1206 -
1207 1207  [[image:image-20220920135918-1.png]]
1208 1208  
1209 1209  
... ... @@ -1219,7 +1219,7 @@
1219 1219  [[image:image-20220920141936-2.png]]
1220 1220  
1221 1221  
1222 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="f34b4950-25aa-4a6d-a2b4-4af0ec0010a7" %).2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem(%%) ==
845 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
1223 1223  
1224 1224  
1225 1225  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -1227,13 +1227,13 @@
1227 1227  [[image:image-20230508171607-1.png]]
1228 1228  
1229 1229  
1230 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="a7b8cd40-2ec5-4b4b-8220-d32ce0a303a0" %).3  Fallback IP does not work, how can users check(%%) ==
853 +== 9.3  Fallback IP does not work, how can users check ==
1231 1231  
1232 1232  
1233 1233  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
1234 1234  
1235 1235  
1236 -**~1. Check whether the configuration is correct**
859 +**1.Check whether the configuration is correct**
1237 1237  
1238 1238  Run the CMD command to ipconfig and ping 172.31.255.254.
1239 1239  
... ... @@ -1249,7 +1249,7 @@
1249 1249  If the firewall is not down, this will affect access to the gateway.
1250 1250  
1251 1251  
1252 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="b7eec45b-ad8c-4621-a815-f457810d25f4" %).4  Click "Manual_Update", why there is no response?(%%) ==
875 +== 9.4  Click "Manual_Update", why there is no response? ==
1253 1253  
1254 1254  
1255 1255  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -1258,25 +1258,21 @@
1258 1258  [[image:image-20230527090555-3.png||height="660" width="832"]]
1259 1259  
1260 1260  
1261 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="ac1f33b3-1f28-477d-880c-534ac36adcbe" %).5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access(%%) ==
884 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
1262 1262  
1263 -(% style="color:red" %)**Note: The following steps are only applicable to Wi-Fi module MT7601**
1264 1264  
1265 -Users can find the model of the wifi module on the AWS page
1266 -
1267 -[[image:1755136434780-847.png]]
1268 -
1269 1269  Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
1270 1270  
889 +
1271 1271  (% class="box infomessage" %)
1272 1272  (((
1273 -apt update && apt install *dragino*
892 +apt update && apt install dragino-fallback
1274 1274  
1275 1275  wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
1276 1276  )))
1277 1277  
1278 1278  
1279 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).6  How to reset the built-in server(%%) ==
898 +== 9.6  How to clear data from the built-in server ==
1280 1280  
1281 1281  
1282 1282  **1) Build-in The Things Network**
... ... @@ -1283,74 +1283,16 @@
1283 1283  
1284 1284  Refer to this link to delete the Built-in server's device.
1285 1285  
1286 -**[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]**
905 +[[attach:Delete Device.docx||target="_blank"]]
1287 1287  
1288 1288  
1289 1289  **2) Build-in Chirpstack**
1290 1290  
1291 -Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1292 1292  
1293 -[[image:image-20231106180846-5.png||height="310" width="668"]]
911 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1294 1294  
1295 1295  
1296 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).7  (%%)How to check the Storage of the gateway ==
1297 -
1298 -
1299 -Run the following command on the command line interface of the gateway to check the disk space usage:
1300 -
1301 -(% class="box infomessage" %)
1302 1302  (((
1303 -df -h
1304 -)))
1305 -
1306 -[[image:image-20250207145702-2.png]]
1307 -
1308 -On the Linux console of the gateway, enter the following command to check the total disk space occupied by the files running on the gateway:
1309 -
1310 -(% class="box infomessage" %)
1311 -(((
1312 -du -sh /usr/local/ /usr/* /var/*
1313 -)))
1314 -
1315 -[[image:image-20250207145617-1.png]]
1316 -
1317 -== (% data-sider-select-id="9b024263-b754-45b6-ac15-22f86a4e1436" %)12(% data-sider-select-id="0621ef51-7fc1-47ca-86ee-cc1f28f6754b" %).8  (%%)How to clear the local server cache of the gateway using the command ==
1318 -
1319 -Use the following commands to clear the local server cache:
1320 -
1321 -(% class="box infomessage" %)
1322 -(((
1323 -**#Stop the chirpstack service**
1324 -
1325 -systemctl stop chirpstack
1326 -
1327 -
1328 -**#Stop the redis container**
1329 -
1330 -docker stop chirpstack_redis_1
1331 -
1332 -
1333 -**#Remove the Redis container**
1334 -
1335 -docker-compose -f /usr/local/chirpstack/docker-compose.yml rm -f redis
1336 -
1337 -
1338 -**#Remove the Redis data volume**
1339 -
1340 -docker volume rm chirpstack_redisdata
1341 -
1342 -
1343 -**#start the chirpstack service**
1344 -
1345 -systemctl start chirpstack
1346 -)))
1347 -
1348 -
1349 -
1350 -= (% data-sider-select-id="7e5e9cb1-c1dc-4ea9-a9f7-9da676c581a5" style="color:inherit; font-family:inherit; font-size:29px" %)13. Supports(%%) =
1351 -
1352 -
1353 -(((
1354 1354  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1355 1355  )))
1356 1356  
... ... @@ -1358,7 +1358,7 @@
1358 1358  With your question as detailed as possible. We will reply and help you in the shortest.
1359 1359  
1360 1360  
1361 -= (% data-sider-select-id="f8ca68c9-99ed-4795-97c5-3d0d259131e9" %)14. Reference(%%) =
922 += 11. Reference =
1362 1362  
1363 1363  
1364 1364  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -1367,7 +1367,7 @@
1367 1367  
1368 1368  )))
1369 1369  
1370 -= (% data-sider-select-id="a056b4ad-7d05-42b4-ad74-7a3134f8010a" %)15. Order Info(%%) =
931 += 12. Order Info =
1371 1371  
1372 1372  
1373 1373  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -1399,7 +1399,7 @@
1399 1399  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1400 1400  
1401 1401  
1402 -= (% data-sider-select-id="a4433cd3-3bbc-4e6b-8b18-0bd2bc4d6904" %)16. Manufacturer Info(%%) =
963 += 13. Manufacturer Info =
1403 1403  
1404 1404  
1405 1405  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -1409,7 +1409,7 @@
1409 1409  LongCheng Street, LongGang District ; Shenzhen 518116,China
1410 1410  
1411 1411  
1412 -= (% data-sider-select-id="b353afd6-b0f5-48e5-a114-3b5062cbf0d1" %)17. FCC Warning(%%) =
973 += 14. FCC Warning =
1413 1413  
1414 1414  
1415 1415  (((
1754364208742-890.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -158.1 KB
Content
1755136434780-847.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20240318160845-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20240416112509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -82.7 KB
Content
image-20240416112618-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -128.5 KB
Content
image-20240416112649-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240416112712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240416112948-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20240518145859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.7 KB
Content
image-20240518145929-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -59.5 KB
Content
image-20240518152100-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20240518152148-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20240518154223-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -71.7 KB
Content
image-20240803095144-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.0 KB
Content
image-20240831151427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
image-20240831152113-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
image-20240902092034-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -69.4 KB
Content
image-20241231151434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151512-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20241231151635-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.0 KB
Content
image-20241231151810-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.3 KB
Content
image-20241231151939-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.1 KB
Content
image-20241231152015-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -502.0 KB
Content
image-20241231153425-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.4 MB
Content
image-20250207145617-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20250207145702-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.7 KB
Content